1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
4 *
5 * Authors: Shlomi Gridish <gridish@freescale.com>
6 * Li Yang <leoli@freescale.com>
7 * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
8 *
9 * Description:
10 * General Purpose functions for the global management of the
11 * QUICC Engine (QE).
12 */
13 #include <linux/bitmap.h>
14 #include <linux/errno.h>
15 #include <linux/sched.h>
16 #include <linux/kernel.h>
17 #include <linux/param.h>
18 #include <linux/string.h>
19 #include <linux/spinlock.h>
20 #include <linux/mm.h>
21 #include <linux/interrupt.h>
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/ioport.h>
25 #include <linux/iopoll.h>
26 #include <linux/crc32.h>
27 #include <linux/mod_devicetable.h>
28 #include <linux/of.h>
29 #include <linux/platform_device.h>
30 #include <soc/fsl/qe/immap_qe.h>
31 #include <soc/fsl/qe/qe.h>
32
33 static void qe_snums_init(void);
34 static int qe_sdma_init(void);
35
36 static DEFINE_SPINLOCK(qe_lock);
37 DEFINE_SPINLOCK(cmxgcr_lock);
38 EXPORT_SYMBOL(cmxgcr_lock);
39
40 /* We allocate this here because it is used almost exclusively for
41 * the communication processor devices.
42 */
43 struct qe_immap __iomem *qe_immr;
44 EXPORT_SYMBOL(qe_immr);
45
46 static u8 snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
47 static DECLARE_BITMAP(snum_state, QE_NUM_OF_SNUM);
48 static unsigned int qe_num_of_snum;
49
50 static phys_addr_t qebase = -1;
51
qe_get_device_node(void)52 static struct device_node *qe_get_device_node(void)
53 {
54 struct device_node *qe;
55
56 /*
57 * Newer device trees have an "fsl,qe" compatible property for the QE
58 * node, but we still need to support older device trees.
59 */
60 qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
61 if (qe)
62 return qe;
63 return of_find_node_by_type(NULL, "qe");
64 }
65
get_qe_base(void)66 static phys_addr_t get_qe_base(void)
67 {
68 struct device_node *qe;
69 int ret;
70 struct resource res;
71
72 if (qebase != -1)
73 return qebase;
74
75 qe = qe_get_device_node();
76 if (!qe)
77 return qebase;
78
79 ret = of_address_to_resource(qe, 0, &res);
80 if (!ret)
81 qebase = res.start;
82 of_node_put(qe);
83
84 return qebase;
85 }
86
qe_reset(void)87 void qe_reset(void)
88 {
89 if (qe_immr == NULL)
90 qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
91
92 qe_snums_init();
93
94 qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
95 QE_CR_PROTOCOL_UNSPECIFIED, 0);
96
97 /* Reclaim the MURAM memory for our use. */
98 qe_muram_init();
99
100 if (qe_sdma_init())
101 panic("sdma init failed!");
102 }
103
qe_issue_cmd(u32 cmd,u32 device,u8 mcn_protocol,u32 cmd_input)104 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
105 {
106 unsigned long flags;
107 u8 mcn_shift = 0, dev_shift = 0;
108 u32 val;
109 int ret;
110
111 spin_lock_irqsave(&qe_lock, flags);
112 if (cmd == QE_RESET) {
113 iowrite32be((u32)(cmd | QE_CR_FLG), &qe_immr->cp.cecr);
114 } else {
115 if (cmd == QE_ASSIGN_PAGE) {
116 /* Here device is the SNUM, not sub-block */
117 dev_shift = QE_CR_SNUM_SHIFT;
118 } else if (cmd == QE_ASSIGN_RISC) {
119 /* Here device is the SNUM, and mcnProtocol is
120 * e_QeCmdRiscAssignment value */
121 dev_shift = QE_CR_SNUM_SHIFT;
122 mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
123 } else {
124 if (device == QE_CR_SUBBLOCK_USB)
125 mcn_shift = QE_CR_MCN_USB_SHIFT;
126 else
127 mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
128 }
129
130 iowrite32be(cmd_input, &qe_immr->cp.cecdr);
131 iowrite32be((cmd | QE_CR_FLG | ((u32)device << dev_shift) | (u32)mcn_protocol << mcn_shift),
132 &qe_immr->cp.cecr);
133 }
134
135 /* wait for the QE_CR_FLG to clear */
136 ret = readx_poll_timeout_atomic(ioread32be, &qe_immr->cp.cecr, val,
137 (val & QE_CR_FLG) == 0, 0, 100);
138 /* On timeout, ret is -ETIMEDOUT, otherwise it will be 0. */
139 spin_unlock_irqrestore(&qe_lock, flags);
140
141 return ret == 0;
142 }
143 EXPORT_SYMBOL(qe_issue_cmd);
144
145 /* Set a baud rate generator. This needs lots of work. There are
146 * 16 BRGs, which can be connected to the QE channels or output
147 * as clocks. The BRGs are in two different block of internal
148 * memory mapped space.
149 * The BRG clock is the QE clock divided by 2.
150 * It was set up long ago during the initial boot phase and is
151 * given to us.
152 * Baud rate clocks are zero-based in the driver code (as that maps
153 * to port numbers). Documentation uses 1-based numbering.
154 */
155 static unsigned int brg_clk = 0;
156
157 #define CLK_GRAN (1000)
158 #define CLK_GRAN_LIMIT (5)
159
qe_get_brg_clk(void)160 unsigned int qe_get_brg_clk(void)
161 {
162 struct device_node *qe;
163 u32 brg;
164 unsigned int mod;
165
166 if (brg_clk)
167 return brg_clk;
168
169 qe = qe_get_device_node();
170 if (!qe)
171 return brg_clk;
172
173 if (!of_property_read_u32(qe, "brg-frequency", &brg))
174 brg_clk = brg;
175
176 of_node_put(qe);
177
178 /* round this if near to a multiple of CLK_GRAN */
179 mod = brg_clk % CLK_GRAN;
180 if (mod) {
181 if (mod < CLK_GRAN_LIMIT)
182 brg_clk -= mod;
183 else if (mod > (CLK_GRAN - CLK_GRAN_LIMIT))
184 brg_clk += CLK_GRAN - mod;
185 }
186
187 return brg_clk;
188 }
189 EXPORT_SYMBOL(qe_get_brg_clk);
190
191 #define PVR_VER_836x 0x8083
192 #define PVR_VER_832x 0x8084
193
qe_general4_errata(void)194 static bool qe_general4_errata(void)
195 {
196 #ifdef CONFIG_PPC32
197 return pvr_version_is(PVR_VER_836x) || pvr_version_is(PVR_VER_832x);
198 #endif
199 return false;
200 }
201
202 /* Program the BRG to the given sampling rate and multiplier
203 *
204 * @brg: the BRG, QE_BRG1 - QE_BRG16
205 * @rate: the desired sampling rate
206 * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
207 * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
208 * then 'multiplier' should be 8.
209 */
qe_setbrg(enum qe_clock brg,unsigned int rate,unsigned int multiplier)210 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
211 {
212 u32 divisor, tempval;
213 u32 div16 = 0;
214
215 if ((brg < QE_BRG1) || (brg > QE_BRG16))
216 return -EINVAL;
217
218 divisor = qe_get_brg_clk() / (rate * multiplier);
219
220 if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
221 div16 = QE_BRGC_DIV16;
222 divisor /= 16;
223 }
224
225 /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
226 that the BRG divisor must be even if you're not using divide-by-16
227 mode. */
228 if (qe_general4_errata())
229 if (!div16 && (divisor & 1) && (divisor > 3))
230 divisor++;
231
232 tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
233 QE_BRGC_ENABLE | div16;
234
235 iowrite32be(tempval, &qe_immr->brg.brgc[brg - QE_BRG1]);
236
237 return 0;
238 }
239 EXPORT_SYMBOL(qe_setbrg);
240
241 /* Convert a string to a QE clock source enum
242 *
243 * This function takes a string, typically from a property in the device
244 * tree, and returns the corresponding "enum qe_clock" value.
245 */
qe_clock_source(const char * source)246 enum qe_clock qe_clock_source(const char *source)
247 {
248 unsigned int i;
249
250 if (strcasecmp(source, "none") == 0)
251 return QE_CLK_NONE;
252
253 if (strcmp(source, "tsync_pin") == 0)
254 return QE_TSYNC_PIN;
255
256 if (strcmp(source, "rsync_pin") == 0)
257 return QE_RSYNC_PIN;
258
259 if (strncasecmp(source, "brg", 3) == 0) {
260 i = simple_strtoul(source + 3, NULL, 10);
261 if ((i >= 1) && (i <= 16))
262 return (QE_BRG1 - 1) + i;
263 else
264 return QE_CLK_DUMMY;
265 }
266
267 if (strncasecmp(source, "clk", 3) == 0) {
268 i = simple_strtoul(source + 3, NULL, 10);
269 if ((i >= 1) && (i <= 24))
270 return (QE_CLK1 - 1) + i;
271 else
272 return QE_CLK_DUMMY;
273 }
274
275 return QE_CLK_DUMMY;
276 }
277 EXPORT_SYMBOL(qe_clock_source);
278
279 /* Initialize SNUMs (thread serial numbers) according to
280 * QE Module Control chapter, SNUM table
281 */
qe_snums_init(void)282 static void qe_snums_init(void)
283 {
284 static const u8 snum_init_76[] = {
285 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
286 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
287 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
288 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
289 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
290 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
291 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
292 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
293 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
294 0xF4, 0xF5, 0xFC, 0xFD,
295 };
296 static const u8 snum_init_46[] = {
297 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
298 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
299 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
300 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
301 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
302 0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
303 };
304 struct device_node *qe;
305 const u8 *snum_init;
306 int i;
307
308 bitmap_zero(snum_state, QE_NUM_OF_SNUM);
309 qe_num_of_snum = 28; /* The default number of snum for threads is 28 */
310 qe = qe_get_device_node();
311 if (qe) {
312 i = of_property_read_variable_u8_array(qe, "fsl,qe-snums",
313 snums, 1, QE_NUM_OF_SNUM);
314 if (i > 0) {
315 of_node_put(qe);
316 qe_num_of_snum = i;
317 return;
318 }
319 /*
320 * Fall back to legacy binding of using the value of
321 * fsl,qe-num-snums to choose one of the static arrays
322 * above.
323 */
324 of_property_read_u32(qe, "fsl,qe-num-snums", &qe_num_of_snum);
325 of_node_put(qe);
326 }
327
328 if (qe_num_of_snum == 76) {
329 snum_init = snum_init_76;
330 } else if (qe_num_of_snum == 28 || qe_num_of_snum == 46) {
331 snum_init = snum_init_46;
332 } else {
333 pr_err("QE: unsupported value of fsl,qe-num-snums: %u\n", qe_num_of_snum);
334 return;
335 }
336 memcpy(snums, snum_init, qe_num_of_snum);
337 }
338
qe_get_snum(void)339 int qe_get_snum(void)
340 {
341 unsigned long flags;
342 int snum = -EBUSY;
343 int i;
344
345 spin_lock_irqsave(&qe_lock, flags);
346 i = find_first_zero_bit(snum_state, qe_num_of_snum);
347 if (i < qe_num_of_snum) {
348 set_bit(i, snum_state);
349 snum = snums[i];
350 }
351 spin_unlock_irqrestore(&qe_lock, flags);
352
353 return snum;
354 }
355 EXPORT_SYMBOL(qe_get_snum);
356
qe_put_snum(u8 snum)357 void qe_put_snum(u8 snum)
358 {
359 const u8 *p = memchr(snums, snum, qe_num_of_snum);
360
361 if (p)
362 clear_bit(p - snums, snum_state);
363 }
364 EXPORT_SYMBOL(qe_put_snum);
365
qe_sdma_init(void)366 static int qe_sdma_init(void)
367 {
368 struct sdma __iomem *sdma = &qe_immr->sdma;
369 static s32 sdma_buf_offset = -ENOMEM;
370
371 /* allocate 2 internal temporary buffers (512 bytes size each) for
372 * the SDMA */
373 if (sdma_buf_offset < 0) {
374 sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
375 if (sdma_buf_offset < 0)
376 return -ENOMEM;
377 }
378
379 iowrite32be((u32)sdma_buf_offset & QE_SDEBCR_BA_MASK,
380 &sdma->sdebcr);
381 iowrite32be((QE_SDMR_GLB_1_MSK | (0x1 << QE_SDMR_CEN_SHIFT)),
382 &sdma->sdmr);
383
384 return 0;
385 }
386
387 /* The maximum number of RISCs we support */
388 #define MAX_QE_RISC 4
389
390 /* Firmware information stored here for qe_get_firmware_info() */
391 static struct qe_firmware_info qe_firmware_info;
392
393 /*
394 * Set to 1 if QE firmware has been uploaded, and therefore
395 * qe_firmware_info contains valid data.
396 */
397 static int qe_firmware_uploaded;
398
399 /*
400 * Upload a QE microcode
401 *
402 * This function is a worker function for qe_upload_firmware(). It does
403 * the actual uploading of the microcode.
404 */
qe_upload_microcode(const void * base,const struct qe_microcode * ucode)405 static void qe_upload_microcode(const void *base,
406 const struct qe_microcode *ucode)
407 {
408 const __be32 *code = base + be32_to_cpu(ucode->code_offset);
409 unsigned int i;
410
411 if (ucode->major || ucode->minor || ucode->revision)
412 printk(KERN_INFO "qe-firmware: "
413 "uploading microcode '%s' version %u.%u.%u\n",
414 ucode->id, ucode->major, ucode->minor, ucode->revision);
415 else
416 printk(KERN_INFO "qe-firmware: "
417 "uploading microcode '%s'\n", ucode->id);
418
419 /* Use auto-increment */
420 iowrite32be(be32_to_cpu(ucode->iram_offset) | QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR,
421 &qe_immr->iram.iadd);
422
423 for (i = 0; i < be32_to_cpu(ucode->count); i++)
424 iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata);
425
426 /* Set I-RAM Ready Register */
427 iowrite32be(QE_IRAM_READY, &qe_immr->iram.iready);
428 }
429
430 /*
431 * Upload a microcode to the I-RAM at a specific address.
432 *
433 * See Documentation/arch/powerpc/qe_firmware.rst for information on QE microcode
434 * uploading.
435 *
436 * Currently, only version 1 is supported, so the 'version' field must be
437 * set to 1.
438 *
439 * The SOC model and revision are not validated, they are only displayed for
440 * informational purposes.
441 *
442 * 'calc_size' is the calculated size, in bytes, of the firmware structure and
443 * all of the microcode structures, minus the CRC.
444 *
445 * 'length' is the size that the structure says it is, including the CRC.
446 */
qe_upload_firmware(const struct qe_firmware * firmware)447 int qe_upload_firmware(const struct qe_firmware *firmware)
448 {
449 unsigned int i;
450 unsigned int j;
451 u32 crc;
452 size_t calc_size;
453 size_t length;
454 const struct qe_header *hdr;
455
456 if (!firmware) {
457 printk(KERN_ERR "qe-firmware: invalid pointer\n");
458 return -EINVAL;
459 }
460
461 hdr = &firmware->header;
462 length = be32_to_cpu(hdr->length);
463
464 /* Check the magic */
465 if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
466 (hdr->magic[2] != 'F')) {
467 printk(KERN_ERR "qe-firmware: not a microcode\n");
468 return -EPERM;
469 }
470
471 /* Check the version */
472 if (hdr->version != 1) {
473 printk(KERN_ERR "qe-firmware: unsupported version\n");
474 return -EPERM;
475 }
476
477 /* Validate some of the fields */
478 if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
479 printk(KERN_ERR "qe-firmware: invalid data\n");
480 return -EINVAL;
481 }
482
483 /* Validate the length and check if there's a CRC */
484 calc_size = struct_size(firmware, microcode, firmware->count);
485
486 for (i = 0; i < firmware->count; i++)
487 /*
488 * For situations where the second RISC uses the same microcode
489 * as the first, the 'code_offset' and 'count' fields will be
490 * zero, so it's okay to add those.
491 */
492 calc_size += sizeof(__be32) *
493 be32_to_cpu(firmware->microcode[i].count);
494
495 /* Validate the length */
496 if (length != calc_size + sizeof(__be32)) {
497 printk(KERN_ERR "qe-firmware: invalid length\n");
498 return -EPERM;
499 }
500
501 /* Validate the CRC */
502 crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
503 if (crc != crc32(0, firmware, calc_size)) {
504 printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
505 return -EIO;
506 }
507
508 /*
509 * If the microcode calls for it, split the I-RAM.
510 */
511 if (!firmware->split)
512 qe_setbits_be16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
513
514 if (firmware->soc.model)
515 printk(KERN_INFO
516 "qe-firmware: firmware '%s' for %u V%u.%u\n",
517 firmware->id, be16_to_cpu(firmware->soc.model),
518 firmware->soc.major, firmware->soc.minor);
519 else
520 printk(KERN_INFO "qe-firmware: firmware '%s'\n",
521 firmware->id);
522
523 /*
524 * The QE only supports one microcode per RISC, so clear out all the
525 * saved microcode information and put in the new.
526 */
527 memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
528 strscpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
529 qe_firmware_info.extended_modes = be64_to_cpu(firmware->extended_modes);
530 memcpy(qe_firmware_info.vtraps, firmware->vtraps,
531 sizeof(firmware->vtraps));
532
533 /* Loop through each microcode. */
534 for (i = 0; i < firmware->count; i++) {
535 const struct qe_microcode *ucode = &firmware->microcode[i];
536
537 /* Upload a microcode if it's present */
538 if (ucode->code_offset)
539 qe_upload_microcode(firmware, ucode);
540
541 /* Program the traps for this processor */
542 for (j = 0; j < 16; j++) {
543 u32 trap = be32_to_cpu(ucode->traps[j]);
544
545 if (trap)
546 iowrite32be(trap,
547 &qe_immr->rsp[i].tibcr[j]);
548 }
549
550 /* Enable traps */
551 iowrite32be(be32_to_cpu(ucode->eccr),
552 &qe_immr->rsp[i].eccr);
553 }
554
555 qe_firmware_uploaded = 1;
556
557 return 0;
558 }
559 EXPORT_SYMBOL(qe_upload_firmware);
560
561 /*
562 * Get info on the currently-loaded firmware
563 *
564 * This function also checks the device tree to see if the boot loader has
565 * uploaded a firmware already.
566 */
qe_get_firmware_info(void)567 struct qe_firmware_info *qe_get_firmware_info(void)
568 {
569 static int initialized;
570 struct device_node *qe;
571 struct device_node *fw = NULL;
572 const char *sprop;
573
574 /*
575 * If we haven't checked yet, and a driver hasn't uploaded a firmware
576 * yet, then check the device tree for information.
577 */
578 if (qe_firmware_uploaded)
579 return &qe_firmware_info;
580
581 if (initialized)
582 return NULL;
583
584 initialized = 1;
585
586 qe = qe_get_device_node();
587 if (!qe)
588 return NULL;
589
590 /* Find the 'firmware' child node */
591 fw = of_get_child_by_name(qe, "firmware");
592 of_node_put(qe);
593
594 /* Did we find the 'firmware' node? */
595 if (!fw)
596 return NULL;
597
598 qe_firmware_uploaded = 1;
599
600 /* Copy the data into qe_firmware_info*/
601 sprop = of_get_property(fw, "id", NULL);
602 if (sprop)
603 strscpy(qe_firmware_info.id, sprop,
604 sizeof(qe_firmware_info.id));
605
606 of_property_read_u64(fw, "extended-modes",
607 &qe_firmware_info.extended_modes);
608
609 of_property_read_u32_array(fw, "virtual-traps", qe_firmware_info.vtraps,
610 ARRAY_SIZE(qe_firmware_info.vtraps));
611
612 of_node_put(fw);
613
614 return &qe_firmware_info;
615 }
616 EXPORT_SYMBOL(qe_get_firmware_info);
617
qe_get_num_of_risc(void)618 unsigned int qe_get_num_of_risc(void)
619 {
620 struct device_node *qe;
621 unsigned int num_of_risc = 0;
622
623 qe = qe_get_device_node();
624 if (!qe)
625 return num_of_risc;
626
627 of_property_read_u32(qe, "fsl,qe-num-riscs", &num_of_risc);
628
629 of_node_put(qe);
630
631 return num_of_risc;
632 }
633 EXPORT_SYMBOL(qe_get_num_of_risc);
634
qe_get_num_of_snums(void)635 unsigned int qe_get_num_of_snums(void)
636 {
637 return qe_num_of_snum;
638 }
639 EXPORT_SYMBOL(qe_get_num_of_snums);
640
qe_init(void)641 static int __init qe_init(void)
642 {
643 struct device_node *np;
644
645 np = of_find_compatible_node(NULL, NULL, "fsl,qe");
646 if (!np)
647 return -ENODEV;
648 qe_reset();
649 of_node_put(np);
650 return 0;
651 }
652 subsys_initcall(qe_init);
653
654 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
qe_resume(struct platform_device * ofdev)655 static int qe_resume(struct platform_device *ofdev)
656 {
657 if (!qe_alive_during_sleep())
658 qe_reset();
659 return 0;
660 }
661
qe_probe(struct platform_device * ofdev)662 static int qe_probe(struct platform_device *ofdev)
663 {
664 return 0;
665 }
666
667 static const struct of_device_id qe_ids[] = {
668 { .compatible = "fsl,qe", },
669 { },
670 };
671
672 static struct platform_driver qe_driver = {
673 .driver = {
674 .name = "fsl-qe",
675 .of_match_table = qe_ids,
676 },
677 .probe = qe_probe,
678 .resume = qe_resume,
679 };
680
681 builtin_platform_driver(qe_driver);
682 #endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
683