1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Phy drivers for Qualcomm and Atheros platforms 4# 5config PHY_ATH79_USB 6 tristate "Atheros AR71XX/9XXX USB PHY driver" 7 depends on OF && (ATH79 || COMPILE_TEST) 8 default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM 9 select RESET_CONTROLLER 10 select GENERIC_PHY 11 help 12 Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. 13 14config PHY_QCOM_APQ8064_SATA 15 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 16 depends on ARCH_QCOM 17 depends on HAS_IOMEM 18 depends on OF 19 select GENERIC_PHY 20 21config PHY_QCOM_EDP 22 tristate "Qualcomm eDP PHY driver" 23 depends on ARCH_QCOM || COMPILE_TEST 24 depends on OF 25 depends on COMMON_CLK 26 select GENERIC_PHY 27 help 28 Enable this driver to support the Qualcomm eDP PHY found in various 29 Qualcomm chipsets. 30 31config PHY_QCOM_IPQ4019_USB 32 tristate "Qualcomm IPQ4019 USB PHY driver" 33 depends on OF && (ARCH_QCOM || COMPILE_TEST) 34 select GENERIC_PHY 35 help 36 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. 37 38config PHY_QCOM_IPQ806X_SATA 39 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 40 depends on ARCH_QCOM 41 depends on HAS_IOMEM 42 depends on OF 43 select GENERIC_PHY 44 45config PHY_QCOM_PCIE2 46 tristate "Qualcomm PCIe Gen2 PHY Driver" 47 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 48 select GENERIC_PHY 49 help 50 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys 51 based PCIe controller. 52 53menuconfig PHY_QCOM_QMP 54 tristate "Qualcomm QMP PHY Drivers" 55 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 56 57if PHY_QCOM_QMP 58 59config PHY_QCOM_QMP_COMBO 60 tristate "Qualcomm QMP Combo PHY Driver" 61 default PHY_QCOM_QMP 62 depends on TYPEC || TYPEC=n 63 depends on DRM || DRM=n 64 select GENERIC_PHY 65 select MFD_SYSCON 66 select DRM_AUX_BRIDGE if DRM_BRIDGE 67 help 68 Enable this to support the QMP Combo PHY transceiver that is used 69 with USB3 and DisplayPort controllers on Qualcomm chips. 70 71config PHY_QCOM_QMP_PCIE 72 tristate "Qualcomm QMP PCIe PHY Driver" 73 depends on PCI || COMPILE_TEST 74 select GENERIC_PHY 75 default PHY_QCOM_QMP 76 help 77 Enable this to support the QMP PCIe PHY transceiver that is used 78 with PCIe controllers on Qualcomm chips. 79 80config PHY_QCOM_QMP_PCIE_8996 81 tristate "Qualcomm QMP PCIe 8996 PHY Driver" 82 depends on PCI || COMPILE_TEST 83 select GENERIC_PHY 84 default PHY_QCOM_QMP 85 help 86 Enable this to support the QMP PCIe PHY transceiver that is used 87 with PCIe controllers on Qualcomm msm8996 chips. 88 89config PHY_QCOM_QMP_UFS 90 tristate "Qualcomm QMP UFS PHY Driver" 91 select GENERIC_PHY 92 default PHY_QCOM_QMP 93 help 94 Enable this to support the QMP UFS PHY transceiver that is used 95 with UFS controllers on Qualcomm chips. 96 97config PHY_QCOM_QMP_USB 98 tristate "Qualcomm QMP USB PHY Driver" 99 select GENERIC_PHY 100 default PHY_QCOM_QMP 101 help 102 Enable this to support the QMP USB PHY transceiver that is used 103 with USB3 controllers on Qualcomm chips. 104 105config PHY_QCOM_QMP_USB_LEGACY 106 tristate "Qualcomm QMP legacy USB PHY Driver" 107 select GENERIC_PHY 108 default n 109 help 110 Enable this legacy driver to support the QMP USB+DisplayPort Combo 111 PHY transceivers working only in USB3 mode on Qualcomm chips. This 112 driver exists only for compatibility with older device trees, 113 existing users have been migrated to PHY_QCOM_QMP_COMBO driver. 114 115endif # PHY_QCOM_QMP 116 117config PHY_QCOM_QUSB2 118 tristate "Qualcomm QUSB2 PHY Driver" 119 depends on OF && (ARCH_QCOM || COMPILE_TEST) 120 depends on NVMEM || !NVMEM 121 select GENERIC_PHY 122 help 123 Enable this to support the HighSpeed QUSB2 PHY transceiver for USB 124 controllers on Qualcomm chips. This driver supports the high-speed 125 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 126 USB IPs on MSM SOCs. 127 128config PHY_QCOM_SNPS_EUSB2 129 tristate "Qualcomm SNPS eUSB2 PHY Driver" 130 depends on OF && (ARCH_QCOM || COMPILE_TEST) 131 select GENERIC_PHY 132 help 133 Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm 134 chipsets. The PHY is paired with a Synopsys DWC3 USB controller 135 on Qualcomm SOCs. 136 137config PHY_QCOM_EUSB2_REPEATER 138 tristate "Qualcomm SNPS eUSB2 Repeater Driver" 139 depends on OF && (ARCH_QCOM || COMPILE_TEST) 140 select GENERIC_PHY 141 help 142 Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm 143 PMICs. The repeater is paired with a Synopsys eUSB2 Phy 144 on Qualcomm SOCs. 145 146config PHY_QCOM_M31_USB 147 tristate "Qualcomm M31 HS PHY driver support" 148 depends on USB && (ARCH_QCOM || COMPILE_TEST) 149 select GENERIC_PHY 150 help 151 Enable this to support M31 HS PHY transceivers on Qualcomm chips 152 with DWC3 USB core. It handles PHY initialization, clock 153 management required after resetting the hardware and power 154 management. This driver is required even for peripheral only or 155 host only mode configurations. 156 157config PHY_QCOM_USB_HS 158 tristate "Qualcomm USB HS PHY module" 159 depends on USB_ULPI_BUS 160 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 161 select GENERIC_PHY 162 help 163 Support for the USB high-speed ULPI compliant phy on Qualcomm 164 chipsets. 165 166config PHY_QCOM_USB_SNPS_FEMTO_V2 167 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" 168 depends on OF && (ARCH_QCOM || COMPILE_TEST) 169 select GENERIC_PHY 170 help 171 Enable support for the USB high-speed SNPS Femto phy on Qualcomm 172 chipsets. This PHY has differences in the register map compared 173 to the V1 variants. The PHY is paired with a Synopsys DWC3 USB 174 controller on Qualcomm SOCs. 175 176config PHY_QCOM_USB_HSIC 177 tristate "Qualcomm USB HSIC ULPI PHY module" 178 depends on USB_ULPI_BUS 179 select GENERIC_PHY 180 help 181 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. 182 183config PHY_QCOM_USB_HS_28NM 184 tristate "Qualcomm 28nm High-Speed PHY" 185 depends on OF && (ARCH_QCOM || COMPILE_TEST) 186 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 187 select GENERIC_PHY 188 help 189 Enable this to support the Qualcomm Synopsys DesignWare Core 28nm 190 High-Speed PHY driver. This driver supports the Hi-Speed PHY which 191 is usually paired with either the ChipIdea or Synopsys DWC3 USB 192 IPs on MSM SOCs. 193 194config PHY_QCOM_USB_SS 195 tristate "Qualcomm USB Super-Speed PHY driver" 196 depends on OF && (ARCH_QCOM || COMPILE_TEST) 197 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 198 select GENERIC_PHY 199 help 200 Enable this to support the Super-Speed USB transceiver on various 201 Qualcomm chipsets. 202 203config PHY_QCOM_IPQ806X_USB 204 tristate "Qualcomm IPQ806x DWC3 USB PHY driver" 205 depends on HAS_IOMEM 206 depends on OF && (ARCH_QCOM || COMPILE_TEST) 207 select GENERIC_PHY 208 help 209 This option enables support for the Synopsis PHYs present inside the 210 Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports 211 both HS and SS PHY controllers. 212 213config PHY_QCOM_SGMII_ETH 214 tristate "Qualcomm DWMAC SGMII SerDes/PHY driver" 215 depends on OF && (ARCH_QCOM || COMPILE_TEST) 216 depends on HAS_IOMEM 217 select GENERIC_PHY 218 help 219 Enable this to support the internal SerDes/SGMII PHY on various 220 Qualcomm chipsets. 221