1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Phy drivers for Qualcomm and Atheros platforms 4# 5config PHY_ATH79_USB 6 tristate "Atheros AR71XX/9XXX USB PHY driver" 7 depends on OF && (ATH79 || COMPILE_TEST) 8 default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM 9 select RESET_CONTROLLER 10 select GENERIC_PHY 11 help 12 Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. 13 14config PHY_QCOM_APQ8064_SATA 15 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" 16 depends on ARCH_QCOM 17 depends on HAS_IOMEM 18 depends on OF 19 select GENERIC_PHY 20 21config PHY_QCOM_EDP 22 tristate "Qualcomm eDP PHY driver" 23 depends on ARCH_QCOM || COMPILE_TEST 24 depends on OF 25 depends on COMMON_CLK 26 select GENERIC_PHY 27 help 28 Enable this driver to support the Qualcomm eDP PHY found in various 29 Qualcomm chipsets. 30 31config PHY_QCOM_IPQ4019_USB 32 tristate "Qualcomm IPQ4019 USB PHY driver" 33 depends on OF && (ARCH_QCOM || COMPILE_TEST) 34 select GENERIC_PHY 35 help 36 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. 37 38config PHY_QCOM_IPQ806X_SATA 39 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" 40 depends on ARCH_QCOM 41 depends on HAS_IOMEM 42 depends on OF 43 select GENERIC_PHY 44 45config PHY_QCOM_PCIE2 46 tristate "Qualcomm PCIe Gen2 PHY Driver" 47 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 48 select GENERIC_PHY 49 help 50 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys 51 based PCIe controller. 52 53menuconfig PHY_QCOM_QMP 54 tristate "Qualcomm QMP PHY Drivers" 55 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 56 57if PHY_QCOM_QMP 58 59config PHY_QCOM_QMP_COMBO 60 tristate "Qualcomm QMP Combo PHY Driver" 61 default PHY_QCOM_QMP 62 depends on TYPEC || TYPEC=n 63 depends on DRM || DRM=n 64 select GENERIC_PHY 65 select MFD_SYSCON 66 select DRM_AUX_BRIDGE if DRM_BRIDGE 67 help 68 Enable this to support the QMP Combo PHY transceiver that is used 69 with USB3 and DisplayPort controllers on Qualcomm chips. 70 71config PHY_QCOM_QMP_PCIE 72 tristate "Qualcomm QMP PCIe PHY Driver" 73 depends on PCI || COMPILE_TEST 74 select GENERIC_PHY 75 default PHY_QCOM_QMP 76 help 77 Enable this to support the QMP PCIe PHY transceiver that is used 78 with PCIe controllers on Qualcomm chips. 79 80config PHY_QCOM_QMP_PCIE_8996 81 tristate "Qualcomm QMP PCIe 8996 PHY Driver" 82 depends on PCI || COMPILE_TEST 83 select GENERIC_PHY 84 default PHY_QCOM_QMP 85 help 86 Enable this to support the QMP PCIe PHY transceiver that is used 87 with PCIe controllers on Qualcomm msm8996 chips. 88 89config PHY_QCOM_QMP_UFS 90 tristate "Qualcomm QMP UFS PHY Driver" 91 select GENERIC_PHY 92 default PHY_QCOM_QMP 93 help 94 Enable this to support the QMP UFS PHY transceiver that is used 95 with UFS controllers on Qualcomm chips. 96 97config PHY_QCOM_QMP_USB 98 tristate "Qualcomm QMP USB PHY Driver" 99 select GENERIC_PHY 100 default PHY_QCOM_QMP 101 help 102 Enable this to support the QMP USB PHY transceiver that is used 103 with USB3 controllers on Qualcomm chips. 104 105config PHY_QCOM_QMP_USB_LEGACY 106 tristate "Qualcomm QMP legacy USB PHY Driver" 107 select GENERIC_PHY 108 default n 109 help 110 Enable this legacy driver to support the QMP USB+DisplayPort Combo 111 PHY transceivers working only in USB3 mode on Qualcomm chips. This 112 driver exists only for compatibility with older device trees, 113 existing users have been migrated to PHY_QCOM_QMP_COMBO driver. 114 115endif # PHY_QCOM_QMP 116 117config PHY_QCOM_QUSB2 118 tristate "Qualcomm QUSB2 PHY Driver" 119 depends on OF && (ARCH_QCOM || COMPILE_TEST) 120 depends on NVMEM || !NVMEM 121 select GENERIC_PHY 122 help 123 Enable this to support the HighSpeed QUSB2 PHY transceiver for USB 124 controllers on Qualcomm chips. This driver supports the high-speed 125 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 126 USB IPs on MSM SOCs. 127 128config PHY_QCOM_EUSB2_REPEATER 129 tristate "Qualcomm PMIC eUSB2 Repeater Driver" 130 depends on OF && (ARCH_QCOM || COMPILE_TEST) 131 select GENERIC_PHY 132 help 133 Enable support for the USB high-speed eUSB2 repeater on Qualcomm 134 PMICs. The repeater is paired with a Synopsys or M31 eUSB2 Phy 135 on Qualcomm SOCs. 136 137config PHY_QCOM_M31_USB 138 tristate "Qualcomm M31 HS PHY driver support" 139 depends on USB && (ARCH_QCOM || COMPILE_TEST) 140 select GENERIC_PHY 141 help 142 Enable this to support M31 HS PHY transceivers on Qualcomm chips 143 with DWC3 USB core. It handles PHY initialization, clock 144 management required after resetting the hardware and power 145 management. This driver is required even for peripheral only or 146 host only mode configurations. 147 148config PHY_QCOM_UNIPHY_PCIE_28LP 149 bool "PCIE UNIPHY 28LP PHY driver" 150 depends on ARCH_QCOM 151 depends on COMMON_CLK 152 depends on HAS_IOMEM 153 depends on OF 154 select GENERIC_PHY 155 help 156 Enable this to support the PCIe UNIPHY 28LP phy transceiver that 157 is used with PCIe controllers on Qualcomm IPQ5332 chips. It 158 handles PHY initialization, clock management required after 159 resetting the hardware and power management. 160 161config PHY_QCOM_M31_EUSB 162 tristate "Qualcomm M31 eUSB2 PHY driver support" 163 depends on USB && (ARCH_QCOM || COMPILE_TEST) 164 select GENERIC_PHY 165 help 166 Enable this to support M31 EUSB2 PHY transceivers on Qualcomm 167 chips with DWC3 USB core. It supports initializing and cleaning 168 up of the associated USB repeater that is paired with the eUSB2 169 PHY. 170 171config PHY_QCOM_USB_HS 172 tristate "Qualcomm USB HS PHY module" 173 depends on USB_ULPI_BUS 174 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 175 select GENERIC_PHY 176 help 177 Support for the USB high-speed ULPI compliant phy on Qualcomm 178 chipsets. 179 180config PHY_QCOM_USB_SNPS_FEMTO_V2 181 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" 182 depends on OF && (ARCH_QCOM || COMPILE_TEST) 183 select GENERIC_PHY 184 help 185 Enable support for the USB high-speed SNPS Femto phy on Qualcomm 186 chipsets. This PHY has differences in the register map compared 187 to the V1 variants. The PHY is paired with a Synopsys DWC3 USB 188 controller on Qualcomm SOCs. 189 190config PHY_QCOM_USB_HSIC 191 tristate "Qualcomm USB HSIC ULPI PHY module" 192 depends on USB_ULPI_BUS 193 select GENERIC_PHY 194 help 195 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. 196 197config PHY_QCOM_USB_HS_28NM 198 tristate "Qualcomm 28nm High-Speed PHY" 199 depends on OF && (ARCH_QCOM || COMPILE_TEST) 200 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 201 select GENERIC_PHY 202 help 203 Enable this to support the Qualcomm Synopsys DesignWare Core 28nm 204 High-Speed PHY driver. This driver supports the Hi-Speed PHY which 205 is usually paired with either the ChipIdea or Synopsys DWC3 USB 206 IPs on MSM SOCs. 207 208config PHY_QCOM_USB_SS 209 tristate "Qualcomm USB Super-Speed PHY driver" 210 depends on OF && (ARCH_QCOM || COMPILE_TEST) 211 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in 212 select GENERIC_PHY 213 help 214 Enable this to support the Super-Speed USB transceiver on various 215 Qualcomm chipsets. 216 217config PHY_QCOM_IPQ806X_USB 218 tristate "Qualcomm IPQ806x DWC3 USB PHY driver" 219 depends on HAS_IOMEM 220 depends on OF && (ARCH_QCOM || COMPILE_TEST) 221 select GENERIC_PHY 222 help 223 This option enables support for the Synopsis PHYs present inside the 224 Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports 225 both HS and SS PHY controllers. 226 227config PHY_QCOM_SGMII_ETH 228 tristate "Qualcomm DWMAC SGMII SerDes/PHY driver" 229 depends on OF && (ARCH_QCOM || COMPILE_TEST) 230 depends on HAS_IOMEM 231 select GENERIC_PHY 232 help 233 Enable this to support the internal SerDes/SGMII PHY on various 234 Qualcomm chipsets. 235