1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2018 Marvell 4 * 5 * Author: Thomas Petazzoni <thomas.petazzoni@bootlin.com> 6 * 7 * This file helps PCI controller drivers implement a fake root port 8 * PCI bridge when the HW doesn't provide such a root port PCI 9 * bridge. 10 * 11 * It emulates a PCI bridge by providing a fake PCI configuration 12 * space (and optionally a PCIe capability configuration space) in 13 * memory. By default the read/write operations simply read and update 14 * this fake configuration space in memory. However, PCI controller 15 * drivers can provide through the 'struct pci_sw_bridge_ops' 16 * structure a set of operations to override or complement this 17 * default behavior. 18 */ 19 20 #include <linux/pci.h> 21 #include "pci-bridge-emul.h" 22 23 #define PCI_BRIDGE_CONF_END PCI_STD_HEADER_SIZEOF 24 #define PCI_CAP_SSID_SIZEOF (PCI_SSVID_DEVICE_ID + 2) 25 #define PCI_CAP_PCIE_SIZEOF (PCI_EXP_SLTSTA2 + 2) 26 27 /** 28 * struct pci_bridge_reg_behavior - register bits behaviors 29 * @ro: Read-Only bits 30 * @rw: Read-Write bits 31 * @w1c: Write-1-to-Clear bits 32 * 33 * Reads and Writes will be filtered by specified behavior. All other bits not 34 * declared are assumed 'Reserved' and will return 0 on reads, per PCIe 5.0: 35 * "Reserved register fields must be read only and must return 0 (all 0's for 36 * multi-bit fields) when read". 37 */ 38 struct pci_bridge_reg_behavior { 39 /* Read-only bits */ 40 u32 ro; 41 42 /* Read-write bits */ 43 u32 rw; 44 45 /* Write-1-to-clear bits */ 46 u32 w1c; 47 }; 48 49 static const 50 struct pci_bridge_reg_behavior pci_regs_behavior[PCI_STD_HEADER_SIZEOF / 4] = { 51 [PCI_VENDOR_ID / 4] = { .ro = ~0 }, 52 [PCI_COMMAND / 4] = { 53 .rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 54 PCI_COMMAND_MASTER | PCI_COMMAND_PARITY | 55 PCI_COMMAND_SERR), 56 .ro = ((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE | 57 PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT | 58 PCI_COMMAND_FAST_BACK) | 59 (PCI_STATUS_CAP_LIST | PCI_STATUS_66MHZ | 60 PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MASK) << 16), 61 .w1c = PCI_STATUS_ERROR_BITS << 16, 62 }, 63 [PCI_CLASS_REVISION / 4] = { .ro = ~0 }, 64 65 /* 66 * Cache Line Size register: implement as read-only, we do not 67 * pretend implementing "Memory Write and Invalidate" 68 * transactions" 69 * 70 * Latency Timer Register: implemented as read-only, as "A 71 * bridge that is not capable of a burst transfer of more than 72 * two data phases on its primary interface is permitted to 73 * hardwire the Latency Timer to a value of 16 or less" 74 * 75 * Header Type: always read-only 76 * 77 * BIST register: implemented as read-only, as "A bridge that 78 * does not support BIST must implement this register as a 79 * read-only register that returns 0 when read" 80 */ 81 [PCI_CACHE_LINE_SIZE / 4] = { .ro = ~0 }, 82 83 /* 84 * Base Address registers not used must be implemented as 85 * read-only registers that return 0 when read. 86 */ 87 [PCI_BASE_ADDRESS_0 / 4] = { .ro = ~0 }, 88 [PCI_BASE_ADDRESS_1 / 4] = { .ro = ~0 }, 89 90 [PCI_PRIMARY_BUS / 4] = { 91 /* Primary, secondary and subordinate bus are RW */ 92 .rw = GENMASK(24, 0), 93 /* Secondary latency is read-only */ 94 .ro = GENMASK(31, 24), 95 }, 96 97 [PCI_IO_BASE / 4] = { 98 /* The high four bits of I/O base/limit are RW */ 99 .rw = (GENMASK(15, 12) | GENMASK(7, 4)), 100 101 /* The low four bits of I/O base/limit are RO */ 102 .ro = (((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK | 103 PCI_STATUS_DEVSEL_MASK) << 16) | 104 GENMASK(11, 8) | GENMASK(3, 0)), 105 106 .w1c = PCI_STATUS_ERROR_BITS << 16, 107 }, 108 109 [PCI_MEMORY_BASE / 4] = { 110 /* The high 12-bits of mem base/limit are RW */ 111 .rw = GENMASK(31, 20) | GENMASK(15, 4), 112 113 /* The low four bits of mem base/limit are RO */ 114 .ro = GENMASK(19, 16) | GENMASK(3, 0), 115 }, 116 117 [PCI_PREF_MEMORY_BASE / 4] = { 118 /* The high 12-bits of pref mem base/limit are RW */ 119 .rw = GENMASK(31, 20) | GENMASK(15, 4), 120 121 /* The low four bits of pref mem base/limit are RO */ 122 .ro = GENMASK(19, 16) | GENMASK(3, 0), 123 }, 124 125 [PCI_PREF_BASE_UPPER32 / 4] = { 126 .rw = ~0, 127 }, 128 129 [PCI_PREF_LIMIT_UPPER32 / 4] = { 130 .rw = ~0, 131 }, 132 133 [PCI_IO_BASE_UPPER16 / 4] = { 134 .rw = ~0, 135 }, 136 137 [PCI_CAPABILITY_LIST / 4] = { 138 .ro = GENMASK(7, 0), 139 }, 140 141 /* 142 * If expansion ROM is unsupported then ROM Base Address register must 143 * be implemented as read-only register that return 0 when read, same 144 * as for unused Base Address registers. 145 */ 146 [PCI_ROM_ADDRESS1 / 4] = { 147 .ro = ~0, 148 }, 149 150 /* 151 * Interrupt line (bits 7:0) are RW, interrupt pin (bits 15:8) 152 * are RO, and bridge control (31:16) are a mix of RW, RO, 153 * reserved and W1C bits 154 */ 155 [PCI_INTERRUPT_LINE / 4] = { 156 /* Interrupt line is RW */ 157 .rw = (GENMASK(7, 0) | 158 ((PCI_BRIDGE_CTL_PARITY | 159 PCI_BRIDGE_CTL_SERR | 160 PCI_BRIDGE_CTL_ISA | 161 PCI_BRIDGE_CTL_VGA | 162 PCI_BRIDGE_CTL_MASTER_ABORT | 163 PCI_BRIDGE_CTL_BUS_RESET | 164 BIT(8) | BIT(9) | BIT(11)) << 16)), 165 166 /* Interrupt pin is RO */ 167 .ro = (GENMASK(15, 8) | ((PCI_BRIDGE_CTL_FAST_BACK) << 16)), 168 169 .w1c = BIT(10) << 16, 170 }, 171 }; 172 173 static const 174 struct pci_bridge_reg_behavior pcie_cap_regs_behavior[PCI_CAP_PCIE_SIZEOF / 4] = { 175 [PCI_CAP_LIST_ID / 4] = { 176 /* 177 * Capability ID, Next Capability Pointer and 178 * bits [14:0] of Capabilities register are all read-only. 179 * Bit 15 of Capabilities register is reserved. 180 */ 181 .ro = GENMASK(30, 0), 182 }, 183 184 [PCI_EXP_DEVCAP / 4] = { 185 /* 186 * Bits [31:29] and [17:16] are reserved. 187 * Bits [27:18] are reserved for non-upstream ports. 188 * Bits 28 and [14:6] are reserved for non-endpoint devices. 189 * Other bits are read-only. 190 */ 191 .ro = BIT(15) | GENMASK(5, 0), 192 }, 193 194 [PCI_EXP_DEVCTL / 4] = { 195 /* 196 * Device control register is RW, except bit 15 which is 197 * reserved for non-endpoints or non-PCIe-to-PCI/X bridges. 198 */ 199 .rw = GENMASK(14, 0), 200 201 /* 202 * Device status register has bits 6 and [3:0] W1C, [5:4] RO, 203 * the rest is reserved. Also bit 6 is reserved for non-upstream 204 * ports. 205 */ 206 .w1c = GENMASK(3, 0) << 16, 207 .ro = GENMASK(5, 4) << 16, 208 }, 209 210 [PCI_EXP_LNKCAP / 4] = { 211 /* 212 * All bits are RO, except bit 23 which is reserved and 213 * bit 18 which is reserved for non-upstream ports. 214 */ 215 .ro = lower_32_bits(~(BIT(23) | PCI_EXP_LNKCAP_CLKPM)), 216 }, 217 218 [PCI_EXP_LNKCTL / 4] = { 219 /* 220 * Link control has bits [15:14], [11:3] and [1:0] RW, the 221 * rest is reserved. Bit 8 is reserved for non-upstream ports. 222 * 223 * Link status has bits [13:0] RO, and bits [15:14] 224 * W1C. 225 */ 226 .rw = GENMASK(15, 14) | GENMASK(11, 9) | GENMASK(7, 3) | GENMASK(1, 0), 227 .ro = GENMASK(13, 0) << 16, 228 .w1c = GENMASK(15, 14) << 16, 229 }, 230 231 [PCI_EXP_SLTCAP / 4] = { 232 .ro = ~0, 233 }, 234 235 [PCI_EXP_SLTCTL / 4] = { 236 /* 237 * Slot control has bits [14:0] RW, the rest is 238 * reserved. 239 * 240 * Slot status has bits 8 and [4:0] W1C, bits [7:5] RO, the 241 * rest is reserved. 242 */ 243 .rw = GENMASK(14, 0), 244 .w1c = (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | 245 PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC | 246 PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16, 247 .ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS | 248 PCI_EXP_SLTSTA_EIS) << 16, 249 }, 250 251 [PCI_EXP_RTCTL / 4] = { 252 /* 253 * Root control has bits [4:0] RW, the rest is 254 * reserved. 255 * 256 * Root capabilities has bit 0 RO, the rest is reserved. 257 */ 258 .rw = (PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | 259 PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE | 260 PCI_EXP_RTCTL_CRSSVE), 261 .ro = PCI_EXP_RTCAP_CRSVIS << 16, 262 }, 263 264 [PCI_EXP_RTSTA / 4] = { 265 /* 266 * Root status has bits 17 and [15:0] RO, bit 16 W1C, the rest 267 * is reserved. 268 */ 269 .ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING, 270 .w1c = PCI_EXP_RTSTA_PME, 271 }, 272 273 [PCI_EXP_DEVCAP2 / 4] = { 274 /* 275 * Device capabilities 2 register has reserved bits [30:27]. 276 * Also bits [26:24] are reserved for non-upstream ports. 277 */ 278 .ro = BIT(31) | GENMASK(23, 0), 279 }, 280 281 [PCI_EXP_DEVCTL2 / 4] = { 282 /* 283 * Device control 2 register is RW. Bit 11 is reserved for 284 * non-upstream ports. 285 * 286 * Device status 2 register is reserved. 287 */ 288 .rw = GENMASK(15, 12) | GENMASK(10, 0), 289 }, 290 291 [PCI_EXP_LNKCAP2 / 4] = { 292 /* Link capabilities 2 register has reserved bits [30:25] and 0. */ 293 .ro = BIT(31) | GENMASK(24, 1), 294 }, 295 296 [PCI_EXP_LNKCTL2 / 4] = { 297 /* 298 * Link control 2 register is RW. 299 * 300 * Link status 2 register has bits 5, 15 W1C; 301 * bits 10, 11 reserved and others are RO. 302 */ 303 .rw = GENMASK(15, 0), 304 .w1c = (BIT(15) | BIT(5)) << 16, 305 .ro = (GENMASK(14, 12) | GENMASK(9, 6) | GENMASK(4, 0)) << 16, 306 }, 307 308 [PCI_EXP_SLTCAP2 / 4] = { 309 /* Slot capabilities 2 register is reserved. */ 310 }, 311 312 [PCI_EXP_SLTCTL2 / 4] = { 313 /* Both Slot control 2 and Slot status 2 registers are reserved. */ 314 }, 315 }; 316 317 static pci_bridge_emul_read_status_t 318 pci_bridge_emul_read_ssid(struct pci_bridge_emul *bridge, int reg, u32 *value) 319 { 320 switch (reg) { 321 case PCI_CAP_LIST_ID: 322 *value = PCI_CAP_ID_SSVID | 323 ((bridge->pcie_start > bridge->ssid_start) ? (bridge->pcie_start << 8) : 0); 324 return PCI_BRIDGE_EMUL_HANDLED; 325 326 case PCI_SSVID_VENDOR_ID: 327 *value = bridge->subsystem_vendor_id | 328 (bridge->subsystem_id << 16); 329 return PCI_BRIDGE_EMUL_HANDLED; 330 331 default: 332 return PCI_BRIDGE_EMUL_NOT_HANDLED; 333 } 334 } 335 336 /* 337 * Initialize a pci_bridge_emul structure to represent a fake PCI 338 * bridge configuration space. The caller needs to have initialized 339 * the PCI configuration space with whatever values make sense 340 * (typically at least vendor, device, revision), the ->ops pointer, 341 * and optionally ->data and ->has_pcie. 342 */ 343 int pci_bridge_emul_init(struct pci_bridge_emul *bridge, 344 unsigned int flags) 345 { 346 BUILD_BUG_ON(sizeof(bridge->conf) != PCI_BRIDGE_CONF_END); 347 348 /* 349 * class_revision: Class is high 24 bits and revision is low 8 bit 350 * of this member, while class for PCI Bridge Normal Decode has the 351 * 24-bit value: PCI_CLASS_BRIDGE_PCI_NORMAL 352 */ 353 bridge->conf.class_revision |= 354 cpu_to_le32(PCI_CLASS_BRIDGE_PCI_NORMAL << 8); 355 bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE; 356 bridge->conf.cache_line_size = 0x10; 357 bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST); 358 bridge->pci_regs_behavior = kmemdup(pci_regs_behavior, 359 sizeof(pci_regs_behavior), 360 GFP_KERNEL); 361 if (!bridge->pci_regs_behavior) 362 return -ENOMEM; 363 364 /* If ssid_start and pcie_start were not specified then choose the lowest possible value. */ 365 if (!bridge->ssid_start && !bridge->pcie_start) { 366 if (bridge->subsystem_vendor_id) 367 bridge->ssid_start = PCI_BRIDGE_CONF_END; 368 if (bridge->has_pcie) 369 bridge->pcie_start = bridge->ssid_start + PCI_CAP_SSID_SIZEOF; 370 } else if (!bridge->ssid_start && bridge->subsystem_vendor_id) { 371 if (bridge->pcie_start - PCI_BRIDGE_CONF_END >= PCI_CAP_SSID_SIZEOF) 372 bridge->ssid_start = PCI_BRIDGE_CONF_END; 373 else 374 bridge->ssid_start = bridge->pcie_start + PCI_CAP_PCIE_SIZEOF; 375 } else if (!bridge->pcie_start && bridge->has_pcie) { 376 if (bridge->ssid_start - PCI_BRIDGE_CONF_END >= PCI_CAP_PCIE_SIZEOF) 377 bridge->pcie_start = PCI_BRIDGE_CONF_END; 378 else 379 bridge->pcie_start = bridge->ssid_start + PCI_CAP_SSID_SIZEOF; 380 } 381 382 bridge->conf.capabilities_pointer = min(bridge->ssid_start, bridge->pcie_start); 383 384 if (bridge->conf.capabilities_pointer) 385 bridge->conf.status |= cpu_to_le16(PCI_STATUS_CAP_LIST); 386 387 if (bridge->has_pcie) { 388 bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP; 389 bridge->pcie_conf.next = (bridge->ssid_start > bridge->pcie_start) ? 390 bridge->ssid_start : 0; 391 bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4); 392 bridge->pcie_cap_regs_behavior = 393 kmemdup(pcie_cap_regs_behavior, 394 sizeof(pcie_cap_regs_behavior), 395 GFP_KERNEL); 396 if (!bridge->pcie_cap_regs_behavior) { 397 kfree(bridge->pci_regs_behavior); 398 return -ENOMEM; 399 } 400 /* These bits are applicable only for PCI and reserved on PCIe */ 401 bridge->pci_regs_behavior[PCI_CACHE_LINE_SIZE / 4].ro &= 402 ~GENMASK(15, 8); 403 bridge->pci_regs_behavior[PCI_COMMAND / 4].ro &= 404 ~((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE | 405 PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT | 406 PCI_COMMAND_FAST_BACK) | 407 (PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK | 408 PCI_STATUS_DEVSEL_MASK) << 16); 409 bridge->pci_regs_behavior[PCI_PRIMARY_BUS / 4].ro &= 410 ~GENMASK(31, 24); 411 bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro &= 412 ~((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK | 413 PCI_STATUS_DEVSEL_MASK) << 16); 414 bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].rw &= 415 ~((PCI_BRIDGE_CTL_MASTER_ABORT | 416 BIT(8) | BIT(9) | BIT(11)) << 16); 417 bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].ro &= 418 ~((PCI_BRIDGE_CTL_FAST_BACK) << 16); 419 bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].w1c &= 420 ~(BIT(10) << 16); 421 } 422 423 if (flags & PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD) { 424 bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].ro = ~0; 425 bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].rw = 0; 426 } 427 428 if (flags & PCI_BRIDGE_EMUL_NO_IO_FORWARD) { 429 bridge->pci_regs_behavior[PCI_COMMAND / 4].ro |= PCI_COMMAND_IO; 430 bridge->pci_regs_behavior[PCI_COMMAND / 4].rw &= ~PCI_COMMAND_IO; 431 bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro |= GENMASK(15, 0); 432 bridge->pci_regs_behavior[PCI_IO_BASE / 4].rw &= ~GENMASK(15, 0); 433 bridge->pci_regs_behavior[PCI_IO_BASE_UPPER16 / 4].ro = ~0; 434 bridge->pci_regs_behavior[PCI_IO_BASE_UPPER16 / 4].rw = 0; 435 } 436 437 return 0; 438 } 439 EXPORT_SYMBOL_GPL(pci_bridge_emul_init); 440 441 /* 442 * Cleanup a pci_bridge_emul structure that was previously initialized 443 * using pci_bridge_emul_init(). 444 */ 445 void pci_bridge_emul_cleanup(struct pci_bridge_emul *bridge) 446 { 447 if (bridge->has_pcie) 448 kfree(bridge->pcie_cap_regs_behavior); 449 kfree(bridge->pci_regs_behavior); 450 } 451 EXPORT_SYMBOL_GPL(pci_bridge_emul_cleanup); 452 453 /* 454 * Should be called by the PCI controller driver when reading the PCI 455 * configuration space of the fake bridge. It will call back the 456 * ->ops->read_base or ->ops->read_pcie operations. 457 */ 458 int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where, 459 int size, u32 *value) 460 { 461 int ret; 462 int reg = where & ~3; 463 pci_bridge_emul_read_status_t (*read_op)(struct pci_bridge_emul *bridge, 464 int reg, u32 *value); 465 __le32 *cfgspace; 466 const struct pci_bridge_reg_behavior *behavior; 467 468 if (reg < PCI_BRIDGE_CONF_END) { 469 /* Emulated PCI space */ 470 read_op = bridge->ops->read_base; 471 cfgspace = (__le32 *) &bridge->conf; 472 behavior = bridge->pci_regs_behavior; 473 } else if (reg >= bridge->ssid_start && reg < bridge->ssid_start + PCI_CAP_SSID_SIZEOF && 474 bridge->subsystem_vendor_id) { 475 /* Emulated PCI Bridge Subsystem Vendor ID capability */ 476 reg -= bridge->ssid_start; 477 read_op = pci_bridge_emul_read_ssid; 478 cfgspace = NULL; 479 behavior = NULL; 480 } else if (reg >= bridge->pcie_start && reg < bridge->pcie_start + PCI_CAP_PCIE_SIZEOF && 481 bridge->has_pcie) { 482 /* Our emulated PCIe capability */ 483 reg -= bridge->pcie_start; 484 read_op = bridge->ops->read_pcie; 485 cfgspace = (__le32 *) &bridge->pcie_conf; 486 behavior = bridge->pcie_cap_regs_behavior; 487 } else if (reg >= PCI_CFG_SPACE_SIZE && bridge->has_pcie) { 488 /* PCIe extended capability space */ 489 reg -= PCI_CFG_SPACE_SIZE; 490 read_op = bridge->ops->read_ext; 491 cfgspace = NULL; 492 behavior = NULL; 493 } else { 494 /* Not implemented */ 495 *value = 0; 496 return PCIBIOS_SUCCESSFUL; 497 } 498 499 if (read_op) 500 ret = read_op(bridge, reg, value); 501 else 502 ret = PCI_BRIDGE_EMUL_NOT_HANDLED; 503 504 if (ret == PCI_BRIDGE_EMUL_NOT_HANDLED) { 505 if (cfgspace) 506 *value = le32_to_cpu(cfgspace[reg / 4]); 507 else 508 *value = 0; 509 } 510 511 /* 512 * Make sure we never return any reserved bit with a value 513 * different from 0. 514 */ 515 if (behavior) 516 *value &= behavior[reg / 4].ro | behavior[reg / 4].rw | 517 behavior[reg / 4].w1c; 518 519 if (size == 1) 520 *value = (*value >> (8 * (where & 3))) & 0xff; 521 else if (size == 2) 522 *value = (*value >> (8 * (where & 3))) & 0xffff; 523 else if (size != 4) 524 return PCIBIOS_BAD_REGISTER_NUMBER; 525 526 return PCIBIOS_SUCCESSFUL; 527 } 528 EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_read); 529 530 /* 531 * Should be called by the PCI controller driver when writing the PCI 532 * configuration space of the fake bridge. It will call back the 533 * ->ops->write_base or ->ops->write_pcie operations. 534 */ 535 int pci_bridge_emul_conf_write(struct pci_bridge_emul *bridge, int where, 536 int size, u32 value) 537 { 538 int reg = where & ~3; 539 int mask, ret, old, new, shift; 540 void (*write_op)(struct pci_bridge_emul *bridge, int reg, 541 u32 old, u32 new, u32 mask); 542 __le32 *cfgspace; 543 const struct pci_bridge_reg_behavior *behavior; 544 545 ret = pci_bridge_emul_conf_read(bridge, reg, 4, &old); 546 if (ret != PCIBIOS_SUCCESSFUL) 547 return ret; 548 549 if (reg < PCI_BRIDGE_CONF_END) { 550 /* Emulated PCI space */ 551 write_op = bridge->ops->write_base; 552 cfgspace = (__le32 *) &bridge->conf; 553 behavior = bridge->pci_regs_behavior; 554 } else if (reg >= bridge->pcie_start && reg < bridge->pcie_start + PCI_CAP_PCIE_SIZEOF && 555 bridge->has_pcie) { 556 /* Our emulated PCIe capability */ 557 reg -= bridge->pcie_start; 558 write_op = bridge->ops->write_pcie; 559 cfgspace = (__le32 *) &bridge->pcie_conf; 560 behavior = bridge->pcie_cap_regs_behavior; 561 } else if (reg >= PCI_CFG_SPACE_SIZE && bridge->has_pcie) { 562 /* PCIe extended capability space */ 563 reg -= PCI_CFG_SPACE_SIZE; 564 write_op = bridge->ops->write_ext; 565 cfgspace = NULL; 566 behavior = NULL; 567 } else { 568 /* Not implemented */ 569 return PCIBIOS_SUCCESSFUL; 570 } 571 572 shift = (where & 0x3) * 8; 573 574 if (size == 4) 575 mask = 0xffffffff; 576 else if (size == 2) 577 mask = 0xffff << shift; 578 else if (size == 1) 579 mask = 0xff << shift; 580 else 581 return PCIBIOS_BAD_REGISTER_NUMBER; 582 583 if (behavior) { 584 /* Keep all bits, except the RW bits */ 585 new = old & (~mask | ~behavior[reg / 4].rw); 586 587 /* Update the value of the RW bits */ 588 new |= (value << shift) & (behavior[reg / 4].rw & mask); 589 590 /* Clear the W1C bits */ 591 new &= ~((value << shift) & (behavior[reg / 4].w1c & mask)); 592 } else { 593 new = old & ~mask; 594 new |= (value << shift) & mask; 595 } 596 597 if (cfgspace) { 598 /* Save the new value with the cleared W1C bits into the cfgspace */ 599 cfgspace[reg / 4] = cpu_to_le32(new); 600 } 601 602 if (behavior) { 603 /* 604 * Clear the W1C bits not specified by the write mask, so that the 605 * write_op() does not clear them. 606 */ 607 new &= ~(behavior[reg / 4].w1c & ~mask); 608 609 /* 610 * Set the W1C bits specified by the write mask, so that write_op() 611 * knows about that they are to be cleared. 612 */ 613 new |= (value << shift) & (behavior[reg / 4].w1c & mask); 614 } 615 616 if (write_op) 617 write_op(bridge, reg, old, new, mask); 618 619 return PCIBIOS_SUCCESSFUL; 620 } 621 EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_write); 622