1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2018 Marvell
4 *
5 * Author: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
6 *
7 * This file helps PCI controller drivers implement a fake root port
8 * PCI bridge when the HW doesn't provide such a root port PCI
9 * bridge.
10 *
11 * It emulates a PCI bridge by providing a fake PCI configuration
12 * space (and optionally a PCIe capability configuration space) in
13 * memory. By default the read/write operations simply read and update
14 * this fake configuration space in memory. However, PCI controller
15 * drivers can provide through the 'struct pci_sw_bridge_ops'
16 * structure a set of operations to override or complement this
17 * default behavior.
18 */
19
20 #include <linux/pci.h>
21 #include "pci-bridge-emul.h"
22
23 #define PCI_BRIDGE_CONF_END PCI_STD_HEADER_SIZEOF
24 #define PCI_CAP_SSID_SIZEOF (PCI_SSVID_DEVICE_ID + 2)
25 #define PCI_CAP_PCIE_SIZEOF (PCI_EXP_SLTSTA2 + 2)
26
27 /**
28 * struct pci_bridge_reg_behavior - register bits behaviors
29 * @ro: Read-Only bits
30 * @rw: Read-Write bits
31 * @w1c: Write-1-to-Clear bits
32 *
33 * Reads and Writes will be filtered by specified behavior. All other bits not
34 * declared are assumed 'Reserved' and will return 0 on reads, per PCIe 5.0:
35 * "Reserved register fields must be read only and must return 0 (all 0's for
36 * multi-bit fields) when read".
37 */
38 struct pci_bridge_reg_behavior {
39 /* Read-only bits */
40 u32 ro;
41
42 /* Read-write bits */
43 u32 rw;
44
45 /* Write-1-to-clear bits */
46 u32 w1c;
47 };
48
49 static const
50 struct pci_bridge_reg_behavior pci_regs_behavior[PCI_STD_HEADER_SIZEOF / 4] = {
51 [PCI_VENDOR_ID / 4] = { .ro = ~0 },
52 [PCI_COMMAND / 4] = {
53 .rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
54 PCI_COMMAND_MASTER | PCI_COMMAND_PARITY |
55 PCI_COMMAND_SERR),
56 .ro = ((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
57 PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
58 PCI_COMMAND_FAST_BACK) |
59 (PCI_STATUS_CAP_LIST | PCI_STATUS_66MHZ |
60 PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MASK) << 16),
61 .w1c = PCI_STATUS_ERROR_BITS << 16,
62 },
63 [PCI_CLASS_REVISION / 4] = { .ro = ~0 },
64
65 /*
66 * Cache Line Size register: implement as read-only, we do not
67 * pretend implementing "Memory Write and Invalidate"
68 * transactions"
69 *
70 * Latency Timer Register: implemented as read-only, as "A
71 * bridge that is not capable of a burst transfer of more than
72 * two data phases on its primary interface is permitted to
73 * hardwire the Latency Timer to a value of 16 or less"
74 *
75 * Header Type: always read-only
76 *
77 * BIST register: implemented as read-only, as "A bridge that
78 * does not support BIST must implement this register as a
79 * read-only register that returns 0 when read"
80 */
81 [PCI_CACHE_LINE_SIZE / 4] = { .ro = ~0 },
82
83 /*
84 * Base Address registers not used must be implemented as
85 * read-only registers that return 0 when read.
86 */
87 [PCI_BASE_ADDRESS_0 / 4] = { .ro = ~0 },
88 [PCI_BASE_ADDRESS_1 / 4] = { .ro = ~0 },
89
90 [PCI_PRIMARY_BUS / 4] = {
91 /* Primary, secondary and subordinate bus are RW */
92 .rw = GENMASK(24, 0),
93 /* Secondary latency is read-only */
94 .ro = GENMASK(31, 24),
95 },
96
97 [PCI_IO_BASE / 4] = {
98 /* The high four bits of I/O base/limit are RW */
99 .rw = (GENMASK(15, 12) | GENMASK(7, 4)),
100
101 /* The low four bits of I/O base/limit are RO */
102 .ro = (((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
103 PCI_STATUS_DEVSEL_MASK) << 16) |
104 GENMASK(11, 8) | GENMASK(3, 0)),
105
106 .w1c = PCI_STATUS_ERROR_BITS << 16,
107 },
108
109 [PCI_MEMORY_BASE / 4] = {
110 /* The high 12-bits of mem base/limit are RW */
111 .rw = GENMASK(31, 20) | GENMASK(15, 4),
112
113 /* The low four bits of mem base/limit are RO */
114 .ro = GENMASK(19, 16) | GENMASK(3, 0),
115 },
116
117 [PCI_PREF_MEMORY_BASE / 4] = {
118 /* The high 12-bits of pref mem base/limit are RW */
119 .rw = GENMASK(31, 20) | GENMASK(15, 4),
120
121 /* The low four bits of pref mem base/limit are RO */
122 .ro = GENMASK(19, 16) | GENMASK(3, 0),
123 },
124
125 [PCI_PREF_BASE_UPPER32 / 4] = {
126 .rw = ~0,
127 },
128
129 [PCI_PREF_LIMIT_UPPER32 / 4] = {
130 .rw = ~0,
131 },
132
133 [PCI_IO_BASE_UPPER16 / 4] = {
134 .rw = ~0,
135 },
136
137 [PCI_CAPABILITY_LIST / 4] = {
138 .ro = GENMASK(7, 0),
139 },
140
141 /*
142 * If expansion ROM is unsupported then ROM Base Address register must
143 * be implemented as read-only register that return 0 when read, same
144 * as for unused Base Address registers.
145 */
146 [PCI_ROM_ADDRESS1 / 4] = {
147 .ro = ~0,
148 },
149
150 /*
151 * Interrupt line (bits 7:0) are RW, interrupt pin (bits 15:8)
152 * are RO, and bridge control (31:16) are a mix of RW, RO,
153 * reserved and W1C bits
154 */
155 [PCI_INTERRUPT_LINE / 4] = {
156 /* Interrupt line is RW */
157 .rw = (GENMASK(7, 0) |
158 ((PCI_BRIDGE_CTL_PARITY |
159 PCI_BRIDGE_CTL_SERR |
160 PCI_BRIDGE_CTL_ISA |
161 PCI_BRIDGE_CTL_VGA |
162 PCI_BRIDGE_CTL_MASTER_ABORT |
163 PCI_BRIDGE_CTL_BUS_RESET |
164 BIT(8) | BIT(9) | BIT(11)) << 16)),
165
166 /* Interrupt pin is RO */
167 .ro = (GENMASK(15, 8) | ((PCI_BRIDGE_CTL_FAST_BACK) << 16)),
168
169 .w1c = BIT(10) << 16,
170 },
171 };
172
173 static const
174 struct pci_bridge_reg_behavior pcie_cap_regs_behavior[PCI_CAP_PCIE_SIZEOF / 4] = {
175 [PCI_CAP_LIST_ID / 4] = {
176 /*
177 * Capability ID, Next Capability Pointer and
178 * bits [14:0] of Capabilities register are all read-only.
179 * Bit 15 of Capabilities register is reserved.
180 */
181 .ro = GENMASK(30, 0),
182 },
183
184 [PCI_EXP_DEVCAP / 4] = {
185 /*
186 * Bits [31:29] and [17:16] are reserved.
187 * Bits [27:18] are reserved for non-upstream ports.
188 * Bits 28 and [14:6] are reserved for non-endpoint devices.
189 * Other bits are read-only.
190 */
191 .ro = BIT(15) | GENMASK(5, 0),
192 },
193
194 [PCI_EXP_DEVCTL / 4] = {
195 /*
196 * Device control register is RW, except bit 15 which is
197 * reserved for non-endpoints or non-PCIe-to-PCI/X bridges.
198 */
199 .rw = GENMASK(14, 0),
200
201 /*
202 * Device status register has bits 6 and [3:0] W1C, [5:4] RO,
203 * the rest is reserved. Also bit 6 is reserved for non-upstream
204 * ports.
205 */
206 .w1c = GENMASK(3, 0) << 16,
207 .ro = GENMASK(5, 4) << 16,
208 },
209
210 [PCI_EXP_LNKCAP / 4] = {
211 /*
212 * All bits are RO, except bit 23 which is reserved and
213 * bit 18 which is reserved for non-upstream ports.
214 */
215 .ro = lower_32_bits(~(BIT(23) | PCI_EXP_LNKCAP_CLKPM)),
216 },
217
218 [PCI_EXP_LNKCTL / 4] = {
219 /*
220 * Link control has bits [15:14], [11:3] and [1:0] RW, the
221 * rest is reserved. Bit 8 is reserved for non-upstream ports.
222 *
223 * Link status has bits [13:0] RO, and bits [15:14]
224 * W1C.
225 */
226 .rw = GENMASK(15, 14) | GENMASK(11, 9) | GENMASK(7, 3) | GENMASK(1, 0),
227 .ro = GENMASK(13, 0) << 16,
228 .w1c = GENMASK(15, 14) << 16,
229 },
230
231 [PCI_EXP_SLTCAP / 4] = {
232 .ro = ~0,
233 },
234
235 [PCI_EXP_SLTCTL / 4] = {
236 /*
237 * Slot control has bits [14:0] RW, the rest is
238 * reserved.
239 *
240 * Slot status has bits 8 and [4:0] W1C, bits [7:5] RO, the
241 * rest is reserved.
242 */
243 .rw = GENMASK(14, 0),
244 .w1c = (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
245 PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
246 PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16,
247 .ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS |
248 PCI_EXP_SLTSTA_EIS) << 16,
249 },
250
251 [PCI_EXP_RTCTL / 4] = {
252 /*
253 * Root control has bits [4:0] RW, the rest is
254 * reserved.
255 *
256 * Root capabilities has bit 0 RO, the rest is reserved.
257 */
258 .rw = (PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE |
259 PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE |
260 PCI_EXP_RTCTL_RRS_SVE),
261 .ro = PCI_EXP_RTCAP_RRS_SV << 16,
262 },
263
264 [PCI_EXP_RTSTA / 4] = {
265 /*
266 * Root status has bits 17 and [15:0] RO, bit 16 W1C, the rest
267 * is reserved.
268 */
269 .ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING,
270 .w1c = PCI_EXP_RTSTA_PME,
271 },
272
273 [PCI_EXP_DEVCAP2 / 4] = {
274 /*
275 * Device capabilities 2 register has reserved bits [30:27].
276 * Also bits [26:24] are reserved for non-upstream ports.
277 */
278 .ro = BIT(31) | GENMASK(23, 0),
279 },
280
281 [PCI_EXP_DEVCTL2 / 4] = {
282 /*
283 * Device control 2 register is RW. Bit 11 is reserved for
284 * non-upstream ports.
285 *
286 * Device status 2 register is reserved.
287 */
288 .rw = GENMASK(15, 12) | GENMASK(10, 0),
289 },
290
291 [PCI_EXP_LNKCAP2 / 4] = {
292 /* Link capabilities 2 register has reserved bits [30:25] and 0. */
293 .ro = BIT(31) | GENMASK(24, 1),
294 },
295
296 [PCI_EXP_LNKCTL2 / 4] = {
297 /*
298 * Link control 2 register is RW.
299 *
300 * Link status 2 register has bits 5, 15 W1C;
301 * bits 10, 11 reserved and others are RO.
302 */
303 .rw = GENMASK(15, 0),
304 .w1c = (BIT(15) | BIT(5)) << 16,
305 .ro = (GENMASK(14, 12) | GENMASK(9, 6) | GENMASK(4, 0)) << 16,
306 },
307
308 [PCI_EXP_SLTCAP2 / 4] = {
309 /* Slot capabilities 2 register is reserved. */
310 },
311
312 [PCI_EXP_SLTCTL2 / 4] = {
313 /* Both Slot control 2 and Slot status 2 registers are reserved. */
314 },
315 };
316
317 static pci_bridge_emul_read_status_t
pci_bridge_emul_read_ssid(struct pci_bridge_emul * bridge,int reg,u32 * value)318 pci_bridge_emul_read_ssid(struct pci_bridge_emul *bridge, int reg, u32 *value)
319 {
320 switch (reg) {
321 case PCI_CAP_LIST_ID:
322 *value = PCI_CAP_ID_SSVID |
323 ((bridge->pcie_start > bridge->ssid_start) ? (bridge->pcie_start << 8) : 0);
324 return PCI_BRIDGE_EMUL_HANDLED;
325
326 case PCI_SSVID_VENDOR_ID:
327 *value = bridge->subsystem_vendor_id |
328 (bridge->subsystem_id << 16);
329 return PCI_BRIDGE_EMUL_HANDLED;
330
331 default:
332 return PCI_BRIDGE_EMUL_NOT_HANDLED;
333 }
334 }
335
336 /*
337 * Initialize a pci_bridge_emul structure to represent a fake PCI
338 * bridge configuration space. The caller needs to have initialized
339 * the PCI configuration space with whatever values make sense
340 * (typically at least vendor, device, revision), the ->ops pointer,
341 * and optionally ->data and ->has_pcie.
342 */
pci_bridge_emul_init(struct pci_bridge_emul * bridge,unsigned int flags)343 int pci_bridge_emul_init(struct pci_bridge_emul *bridge,
344 unsigned int flags)
345 {
346 BUILD_BUG_ON(sizeof(bridge->conf) != PCI_BRIDGE_CONF_END);
347
348 /*
349 * class_revision: Class is high 24 bits and revision is low 8 bit
350 * of this member, while class for PCI Bridge Normal Decode has the
351 * 24-bit value: PCI_CLASS_BRIDGE_PCI_NORMAL
352 */
353 bridge->conf.class_revision |=
354 cpu_to_le32(PCI_CLASS_BRIDGE_PCI_NORMAL << 8);
355 bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE;
356 bridge->conf.cache_line_size = 0x10;
357 bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST);
358 bridge->pci_regs_behavior = kmemdup(pci_regs_behavior,
359 sizeof(pci_regs_behavior),
360 GFP_KERNEL);
361 if (!bridge->pci_regs_behavior)
362 return -ENOMEM;
363
364 /* If ssid_start and pcie_start were not specified then choose the lowest possible value. */
365 if (!bridge->ssid_start && !bridge->pcie_start) {
366 if (bridge->subsystem_vendor_id)
367 bridge->ssid_start = PCI_BRIDGE_CONF_END;
368 if (bridge->has_pcie)
369 bridge->pcie_start = bridge->ssid_start + PCI_CAP_SSID_SIZEOF;
370 } else if (!bridge->ssid_start && bridge->subsystem_vendor_id) {
371 if (bridge->pcie_start - PCI_BRIDGE_CONF_END >= PCI_CAP_SSID_SIZEOF)
372 bridge->ssid_start = PCI_BRIDGE_CONF_END;
373 else
374 bridge->ssid_start = bridge->pcie_start + PCI_CAP_PCIE_SIZEOF;
375 } else if (!bridge->pcie_start && bridge->has_pcie) {
376 if (bridge->ssid_start - PCI_BRIDGE_CONF_END >= PCI_CAP_PCIE_SIZEOF)
377 bridge->pcie_start = PCI_BRIDGE_CONF_END;
378 else
379 bridge->pcie_start = bridge->ssid_start + PCI_CAP_SSID_SIZEOF;
380 }
381
382 bridge->conf.capabilities_pointer = min(bridge->ssid_start, bridge->pcie_start);
383
384 if (bridge->conf.capabilities_pointer)
385 bridge->conf.status |= cpu_to_le16(PCI_STATUS_CAP_LIST);
386
387 if (bridge->has_pcie) {
388 bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
389 bridge->pcie_conf.next = (bridge->ssid_start > bridge->pcie_start) ?
390 bridge->ssid_start : 0;
391 bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4);
392 bridge->pcie_cap_regs_behavior =
393 kmemdup(pcie_cap_regs_behavior,
394 sizeof(pcie_cap_regs_behavior),
395 GFP_KERNEL);
396 if (!bridge->pcie_cap_regs_behavior) {
397 kfree(bridge->pci_regs_behavior);
398 return -ENOMEM;
399 }
400 /* These bits are applicable only for PCI and reserved on PCIe */
401 bridge->pci_regs_behavior[PCI_CACHE_LINE_SIZE / 4].ro &=
402 ~GENMASK(15, 8);
403 bridge->pci_regs_behavior[PCI_COMMAND / 4].ro &=
404 ~((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
405 PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
406 PCI_COMMAND_FAST_BACK) |
407 (PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
408 PCI_STATUS_DEVSEL_MASK) << 16);
409 bridge->pci_regs_behavior[PCI_PRIMARY_BUS / 4].ro &=
410 ~GENMASK(31, 24);
411 bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro &=
412 ~((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
413 PCI_STATUS_DEVSEL_MASK) << 16);
414 bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].rw &=
415 ~((PCI_BRIDGE_CTL_MASTER_ABORT |
416 BIT(8) | BIT(9) | BIT(11)) << 16);
417 bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].ro &=
418 ~((PCI_BRIDGE_CTL_FAST_BACK) << 16);
419 bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].w1c &=
420 ~(BIT(10) << 16);
421 }
422
423 if (flags & PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD) {
424 bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].ro = ~0;
425 bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].rw = 0;
426 }
427
428 if (flags & PCI_BRIDGE_EMUL_NO_IO_FORWARD) {
429 bridge->pci_regs_behavior[PCI_COMMAND / 4].ro |= PCI_COMMAND_IO;
430 bridge->pci_regs_behavior[PCI_COMMAND / 4].rw &= ~PCI_COMMAND_IO;
431 bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro |= GENMASK(15, 0);
432 bridge->pci_regs_behavior[PCI_IO_BASE / 4].rw &= ~GENMASK(15, 0);
433 bridge->pci_regs_behavior[PCI_IO_BASE_UPPER16 / 4].ro = ~0;
434 bridge->pci_regs_behavior[PCI_IO_BASE_UPPER16 / 4].rw = 0;
435 }
436
437 return 0;
438 }
439 EXPORT_SYMBOL_GPL(pci_bridge_emul_init);
440
441 /*
442 * Cleanup a pci_bridge_emul structure that was previously initialized
443 * using pci_bridge_emul_init().
444 */
pci_bridge_emul_cleanup(struct pci_bridge_emul * bridge)445 void pci_bridge_emul_cleanup(struct pci_bridge_emul *bridge)
446 {
447 if (bridge->has_pcie)
448 kfree(bridge->pcie_cap_regs_behavior);
449 kfree(bridge->pci_regs_behavior);
450 }
451 EXPORT_SYMBOL_GPL(pci_bridge_emul_cleanup);
452
453 /*
454 * Should be called by the PCI controller driver when reading the PCI
455 * configuration space of the fake bridge. It will call back the
456 * ->ops->read_base or ->ops->read_pcie operations.
457 */
pci_bridge_emul_conf_read(struct pci_bridge_emul * bridge,int where,int size,u32 * value)458 int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where,
459 int size, u32 *value)
460 {
461 int ret;
462 int reg = where & ~3;
463 pci_bridge_emul_read_status_t (*read_op)(struct pci_bridge_emul *bridge,
464 int reg, u32 *value);
465 __le32 *cfgspace;
466 const struct pci_bridge_reg_behavior *behavior;
467
468 if (reg < PCI_BRIDGE_CONF_END) {
469 /* Emulated PCI space */
470 read_op = bridge->ops->read_base;
471 cfgspace = (__le32 *) &bridge->conf;
472 behavior = bridge->pci_regs_behavior;
473 } else if (reg >= bridge->ssid_start && reg < bridge->ssid_start + PCI_CAP_SSID_SIZEOF &&
474 bridge->subsystem_vendor_id) {
475 /* Emulated PCI Bridge Subsystem Vendor ID capability */
476 reg -= bridge->ssid_start;
477 read_op = pci_bridge_emul_read_ssid;
478 cfgspace = NULL;
479 behavior = NULL;
480 } else if (reg >= bridge->pcie_start && reg < bridge->pcie_start + PCI_CAP_PCIE_SIZEOF &&
481 bridge->has_pcie) {
482 /* Our emulated PCIe capability */
483 reg -= bridge->pcie_start;
484 read_op = bridge->ops->read_pcie;
485 cfgspace = (__le32 *) &bridge->pcie_conf;
486 behavior = bridge->pcie_cap_regs_behavior;
487 } else if (reg >= PCI_CFG_SPACE_SIZE && bridge->has_pcie) {
488 /* PCIe extended capability space */
489 reg -= PCI_CFG_SPACE_SIZE;
490 read_op = bridge->ops->read_ext;
491 cfgspace = NULL;
492 behavior = NULL;
493 } else {
494 /* Not implemented */
495 *value = 0;
496 return PCIBIOS_SUCCESSFUL;
497 }
498
499 if (read_op)
500 ret = read_op(bridge, reg, value);
501 else
502 ret = PCI_BRIDGE_EMUL_NOT_HANDLED;
503
504 if (ret == PCI_BRIDGE_EMUL_NOT_HANDLED) {
505 if (cfgspace)
506 *value = le32_to_cpu(cfgspace[reg / 4]);
507 else
508 *value = 0;
509 }
510
511 /*
512 * Make sure we never return any reserved bit with a value
513 * different from 0.
514 */
515 if (behavior)
516 *value &= behavior[reg / 4].ro | behavior[reg / 4].rw |
517 behavior[reg / 4].w1c;
518
519 if (size == 1)
520 *value = (*value >> (8 * (where & 3))) & 0xff;
521 else if (size == 2)
522 *value = (*value >> (8 * (where & 3))) & 0xffff;
523 else if (size != 4)
524 return PCIBIOS_BAD_REGISTER_NUMBER;
525
526 return PCIBIOS_SUCCESSFUL;
527 }
528 EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_read);
529
530 /*
531 * Should be called by the PCI controller driver when writing the PCI
532 * configuration space of the fake bridge. It will call back the
533 * ->ops->write_base or ->ops->write_pcie operations.
534 */
pci_bridge_emul_conf_write(struct pci_bridge_emul * bridge,int where,int size,u32 value)535 int pci_bridge_emul_conf_write(struct pci_bridge_emul *bridge, int where,
536 int size, u32 value)
537 {
538 int reg = where & ~3;
539 int mask, ret, old, new, shift;
540 void (*write_op)(struct pci_bridge_emul *bridge, int reg,
541 u32 old, u32 new, u32 mask);
542 __le32 *cfgspace;
543 const struct pci_bridge_reg_behavior *behavior;
544
545 ret = pci_bridge_emul_conf_read(bridge, reg, 4, &old);
546 if (ret != PCIBIOS_SUCCESSFUL)
547 return ret;
548
549 if (reg < PCI_BRIDGE_CONF_END) {
550 /* Emulated PCI space */
551 write_op = bridge->ops->write_base;
552 cfgspace = (__le32 *) &bridge->conf;
553 behavior = bridge->pci_regs_behavior;
554 } else if (reg >= bridge->pcie_start && reg < bridge->pcie_start + PCI_CAP_PCIE_SIZEOF &&
555 bridge->has_pcie) {
556 /* Our emulated PCIe capability */
557 reg -= bridge->pcie_start;
558 write_op = bridge->ops->write_pcie;
559 cfgspace = (__le32 *) &bridge->pcie_conf;
560 behavior = bridge->pcie_cap_regs_behavior;
561 } else if (reg >= PCI_CFG_SPACE_SIZE && bridge->has_pcie) {
562 /* PCIe extended capability space */
563 reg -= PCI_CFG_SPACE_SIZE;
564 write_op = bridge->ops->write_ext;
565 cfgspace = NULL;
566 behavior = NULL;
567 } else {
568 /* Not implemented */
569 return PCIBIOS_SUCCESSFUL;
570 }
571
572 shift = (where & 0x3) * 8;
573
574 if (size == 4)
575 mask = 0xffffffff;
576 else if (size == 2)
577 mask = 0xffff << shift;
578 else if (size == 1)
579 mask = 0xff << shift;
580 else
581 return PCIBIOS_BAD_REGISTER_NUMBER;
582
583 if (behavior) {
584 /* Keep all bits, except the RW bits */
585 new = old & (~mask | ~behavior[reg / 4].rw);
586
587 /* Update the value of the RW bits */
588 new |= (value << shift) & (behavior[reg / 4].rw & mask);
589
590 /* Clear the W1C bits */
591 new &= ~((value << shift) & (behavior[reg / 4].w1c & mask));
592 } else {
593 new = old & ~mask;
594 new |= (value << shift) & mask;
595 }
596
597 if (cfgspace) {
598 /* Save the new value with the cleared W1C bits into the cfgspace */
599 cfgspace[reg / 4] = cpu_to_le32(new);
600 }
601
602 if (behavior) {
603 /*
604 * Clear the W1C bits not specified by the write mask, so that the
605 * write_op() does not clear them.
606 */
607 new &= ~(behavior[reg / 4].w1c & ~mask);
608
609 /*
610 * Set the W1C bits specified by the write mask, so that write_op()
611 * knows about that they are to be cleared.
612 */
613 new |= (value << shift) & (behavior[reg / 4].w1c & mask);
614 }
615
616 if (write_op)
617 write_op(bridge, reg, old, new, mask);
618
619 return PCIBIOS_SUCCESSFUL;
620 }
621 EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_write);
622