1 /*
2 * Copyright (c) 2009 Atheros Communications Inc.
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
17 #include <linux/export.h>
18 #include <linux/unaligned.h>
19
20 #include "ath.h"
21 #include "reg.h"
22
23 #define REG_READ (common->ops->read)
24 #define REG_WRITE(_ah, _reg, _val) (common->ops->write)(_ah, _val, _reg)
25
26 /**
27 * ath_hw_setbssidmask - filter out bssids we listen
28 *
29 * @common: the ath_common struct for the device.
30 *
31 * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
32 * which bits of the interface's MAC address should be looked at when trying
33 * to decide which packets to ACK. In station mode and AP mode with a single
34 * BSS every bit matters since we lock to only one BSS. In AP mode with
35 * multiple BSSes (virtual interfaces) not every bit matters because hw must
36 * accept frames for all BSSes and so we tweak some bits of our mac address
37 * in order to have multiple BSSes.
38 *
39 * NOTE: This is a simple filter and does *not* filter out all
40 * relevant frames. Some frames that are not for us might get ACKed from us
41 * by PCU because they just match the mask.
42 *
43 * When handling multiple BSSes you can get the BSSID mask by computing the
44 * set of ~ ( MAC XOR BSSID ) for all bssids we handle.
45 *
46 * When you do this you are essentially computing the common bits of all your
47 * BSSes. Later it is assumed the hardware will "and" (&) the BSSID mask with
48 * the MAC address to obtain the relevant bits and compare the result with
49 * (frame's BSSID & mask) to see if they match.
50 *
51 * Simple example: on your card you have two BSSes you have created with
52 * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
53 * There is another BSSID-03 but you are not part of it. For simplicity's sake,
54 * assuming only 4 bits for a mac address and for BSSIDs you can then have:
55 *
56 * \
57 * MAC: 0001 |
58 * BSSID-01: 0100 | --> Belongs to us
59 * BSSID-02: 1001 |
60 * /
61 * -------------------
62 * BSSID-03: 0110 | --> External
63 * -------------------
64 *
65 * Our bssid_mask would then be:
66 *
67 * On loop iteration for BSSID-01:
68 * ~(0001 ^ 0100) -> ~(0101)
69 * -> 1010
70 * bssid_mask = 1010
71 *
72 * On loop iteration for BSSID-02:
73 * bssid_mask &= ~(0001 ^ 1001)
74 * bssid_mask = (1010) & ~(0001 ^ 1001)
75 * bssid_mask = (1010) & ~(1000)
76 * bssid_mask = (1010) & (0111)
77 * bssid_mask = 0010
78 *
79 * A bssid_mask of 0010 means "only pay attention to the second least
80 * significant bit". This is because its the only bit common
81 * amongst the MAC and all BSSIDs we support. To findout what the real
82 * common bit is we can simply "&" the bssid_mask now with any BSSID we have
83 * or our MAC address (we assume the hardware uses the MAC address).
84 *
85 * Now, suppose there's an incoming frame for BSSID-03:
86 *
87 * IFRAME-01: 0110
88 *
89 * An easy eye-inspeciton of this already should tell you that this frame
90 * will not pass our check. This is because the bssid_mask tells the
91 * hardware to only look at the second least significant bit and the
92 * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
93 * as 1, which does not match 0.
94 *
95 * So with IFRAME-01 we *assume* the hardware will do:
96 *
97 * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
98 * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
99 * --> allow = (0010) == 0000 ? 1 : 0;
100 * --> allow = 0
101 *
102 * Lets now test a frame that should work:
103 *
104 * IFRAME-02: 0001 (we should allow)
105 *
106 * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
107 * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
108 * --> allow = (0000) == (0000)
109 * --> allow = 1
110 *
111 * Other examples:
112 *
113 * IFRAME-03: 0100 --> allowed
114 * IFRAME-04: 1001 --> allowed
115 * IFRAME-05: 1101 --> allowed but its not for us!!!
116 *
117 */
ath_hw_setbssidmask(struct ath_common * common)118 void ath_hw_setbssidmask(struct ath_common *common)
119 {
120 void *ah = common->ah;
121 u32 id1;
122
123 REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(common->macaddr));
124 id1 = REG_READ(ah, AR_STA_ID1) & ~AR_STA_ID1_SADH_MASK;
125 id1 |= get_unaligned_le16(common->macaddr + 4);
126 REG_WRITE(ah, AR_STA_ID1, id1);
127
128 REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(common->bssidmask));
129 REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(common->bssidmask + 4));
130 }
131 EXPORT_SYMBOL(ath_hw_setbssidmask);
132
133
134 /**
135 * ath_hw_cycle_counters_update - common function to update cycle counters
136 *
137 * @common: the ath_common struct for the device.
138 *
139 * This function is used to update all cycle counters in one place.
140 * It has to be called while holding common->cc_lock!
141 */
ath_hw_cycle_counters_update(struct ath_common * common)142 void ath_hw_cycle_counters_update(struct ath_common *common)
143 {
144 u32 cycles, busy, rx, tx;
145 void *ah = common->ah;
146
147 /* freeze */
148 REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC);
149
150 /* read */
151 cycles = REG_READ(ah, AR_CCCNT);
152 busy = REG_READ(ah, AR_RCCNT);
153 rx = REG_READ(ah, AR_RFCNT);
154 tx = REG_READ(ah, AR_TFCNT);
155
156 /* clear */
157 REG_WRITE(ah, AR_CCCNT, 0);
158 REG_WRITE(ah, AR_RFCNT, 0);
159 REG_WRITE(ah, AR_RCCNT, 0);
160 REG_WRITE(ah, AR_TFCNT, 0);
161
162 /* unfreeze */
163 REG_WRITE(ah, AR_MIBC, 0);
164
165 /* update all cycle counters here */
166 common->cc_ani.cycles += cycles;
167 common->cc_ani.rx_busy += busy;
168 common->cc_ani.rx_frame += rx;
169 common->cc_ani.tx_frame += tx;
170
171 common->cc_survey.cycles += cycles;
172 common->cc_survey.rx_busy += busy;
173 common->cc_survey.rx_frame += rx;
174 common->cc_survey.tx_frame += tx;
175 }
176 EXPORT_SYMBOL(ath_hw_cycle_counters_update);
177
ath_hw_get_listen_time(struct ath_common * common)178 int32_t ath_hw_get_listen_time(struct ath_common *common)
179 {
180 struct ath_cycle_counters *cc = &common->cc_ani;
181 int32_t listen_time;
182
183 listen_time = (cc->cycles - cc->rx_frame - cc->tx_frame) /
184 (common->clockrate * 1000);
185
186 memset(cc, 0, sizeof(*cc));
187
188 return listen_time;
189 }
190 EXPORT_SYMBOL(ath_hw_get_listen_time);
191