1 // SPDX-License-Identifier: GPL-2.0+
2 /* Driver for Asix PHYs
3 *
4 * Author: Michael Schmitz <schmitzmic@gmail.com>
5 */
6 #include <linux/kernel.h>
7 #include <linux/errno.h>
8 #include <linux/init.h>
9 #include <linux/module.h>
10 #include <linux/mii.h>
11 #include <linux/phy.h>
12
13 #define PHY_ID_ASIX_AX88772A 0x003b1861
14 #define PHY_ID_ASIX_AX88772C 0x003b1881
15 #define PHY_ID_ASIX_AX88796B 0x003b1841
16
17 MODULE_DESCRIPTION("Asix PHY driver");
18 MODULE_AUTHOR("Michael Schmitz <schmitzmic@gmail.com>");
19 MODULE_LICENSE("GPL");
20
21 /**
22 * asix_soft_reset - software reset the PHY via BMCR_RESET bit
23 * @phydev: target phy_device struct
24 *
25 * Description: Perform a software PHY reset using the standard
26 * BMCR_RESET bit and poll for the reset bit to be cleared.
27 * Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
28 * such as used on the Individual Computers' X-Surf 100 Zorro card.
29 *
30 * Returns: 0 on success, < 0 on failure
31 */
asix_soft_reset(struct phy_device * phydev)32 static int asix_soft_reset(struct phy_device *phydev)
33 {
34 int ret;
35
36 /* Asix PHY won't reset unless reset bit toggles */
37 ret = phy_write(phydev, MII_BMCR, 0);
38 if (ret < 0)
39 return ret;
40
41 return genphy_soft_reset(phydev);
42 }
43
44 /* AX88772A is not working properly with some old switches (NETGEAR EN 108TP):
45 * after autoneg is done and the link status is reported as active, the MII_LPA
46 * register is 0. This issue is not reproducible on AX88772C.
47 */
asix_ax88772a_read_status(struct phy_device * phydev)48 static int asix_ax88772a_read_status(struct phy_device *phydev)
49 {
50 int ret, val;
51
52 ret = genphy_update_link(phydev);
53 if (ret)
54 return ret;
55
56 if (!phydev->link)
57 return 0;
58
59 /* If MII_LPA is 0, phy_resolve_aneg_linkmode() will fail to resolve
60 * linkmode so use MII_BMCR as default values.
61 */
62 val = phy_read(phydev, MII_BMCR);
63 if (val < 0)
64 return val;
65
66 if (val & BMCR_SPEED100)
67 phydev->speed = SPEED_100;
68 else
69 phydev->speed = SPEED_10;
70
71 if (val & BMCR_FULLDPLX)
72 phydev->duplex = DUPLEX_FULL;
73 else
74 phydev->duplex = DUPLEX_HALF;
75
76 ret = genphy_read_lpa(phydev);
77 if (ret < 0)
78 return ret;
79
80 if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
81 phy_resolve_aneg_linkmode(phydev);
82
83 return 0;
84 }
85
asix_ax88772a_link_change_notify(struct phy_device * phydev)86 static void asix_ax88772a_link_change_notify(struct phy_device *phydev)
87 {
88 /* Reset PHY, otherwise MII_LPA will provide outdated information.
89 * This issue is reproducible only with some link partner PHYs
90 */
91 if (phydev->state == PHY_NOLINK) {
92 phy_init_hw(phydev);
93 _phy_start_aneg(phydev);
94 }
95 }
96
97 static struct phy_driver asix_driver[] = {
98 {
99 PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A),
100 .name = "Asix Electronics AX88772A",
101 .flags = PHY_IS_INTERNAL,
102 .read_status = asix_ax88772a_read_status,
103 .suspend = genphy_suspend,
104 .resume = genphy_resume,
105 .soft_reset = asix_soft_reset,
106 .link_change_notify = asix_ax88772a_link_change_notify,
107 }, {
108 PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C),
109 .name = "Asix Electronics AX88772C",
110 .flags = PHY_IS_INTERNAL,
111 .suspend = genphy_suspend,
112 .resume = genphy_resume,
113 .soft_reset = asix_soft_reset,
114 }, {
115 .phy_id = PHY_ID_ASIX_AX88796B,
116 .name = "Asix Electronics AX88796B",
117 .phy_id_mask = 0xfffffff0,
118 /* PHY_BASIC_FEATURES */
119 .soft_reset = asix_soft_reset,
120 } };
121
122 module_phy_driver(asix_driver);
123
124 static struct mdio_device_id __maybe_unused asix_tbl[] = {
125 { PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A) },
126 { PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C) },
127 { PHY_ID_ASIX_AX88796B, 0xfffffff0 },
128 { }
129 };
130
131 MODULE_DEVICE_TABLE(mdio, asix_tbl);
132