1# 2# PHY Layer Configuration 3# 4 5menuconfig PHYLIB 6 tristate "PHY Device support and infrastructure" 7 depends on NETDEVICES 8 help 9 Ethernet controllers are usually attached to PHY 10 devices. This option provides infrastructure for 11 managing PHY devices. 12 13if PHYLIB 14 15comment "MII PHY device drivers" 16 17config AQUANTIA_PHY 18 tristate "Drivers for the Aquantia PHYs" 19 ---help--- 20 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 21 22config AT803X_PHY 23 tristate "Drivers for Atheros AT803X PHYs" 24 ---help--- 25 Currently supports the AT8030 and AT8035 model 26 27config AMD_PHY 28 tristate "Drivers for the AMD PHYs" 29 ---help--- 30 Currently supports the am79c874 31 32config MARVELL_PHY 33 tristate "Drivers for Marvell PHYs" 34 ---help--- 35 Currently has a driver for the 88E1011S 36 37config DAVICOM_PHY 38 tristate "Drivers for Davicom PHYs" 39 ---help--- 40 Currently supports dm9161e and dm9131 41 42config QSEMI_PHY 43 tristate "Drivers for Quality Semiconductor PHYs" 44 ---help--- 45 Currently supports the qs6612 46 47config LXT_PHY 48 tristate "Drivers for the Intel LXT PHYs" 49 ---help--- 50 Currently supports the lxt970, lxt971 51 52config CICADA_PHY 53 tristate "Drivers for the Cicada PHYs" 54 ---help--- 55 Currently supports the cis8204 56 57config VITESSE_PHY 58 tristate "Drivers for the Vitesse PHYs" 59 ---help--- 60 Currently supports the vsc8244 61 62config TERANETICS_PHY 63 tristate "Drivers for the Teranetics PHYs" 64 ---help--- 65 Currently supports the Teranetics TN2020 66 67config SMSC_PHY 68 tristate "Drivers for SMSC PHYs" 69 ---help--- 70 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs 71 72config BCM_NET_PHYLIB 73 tristate 74 75config BROADCOM_PHY 76 tristate "Drivers for Broadcom PHYs" 77 select BCM_NET_PHYLIB 78 ---help--- 79 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, 80 BCM5481 and BCM5482 PHYs. 81 82config BCM_CYGNUS_PHY 83 tristate "Drivers for Broadcom Cygnus SoC internal PHY" 84 depends on ARCH_BCM_CYGNUS || COMPILE_TEST 85 depends on MDIO_BCM_IPROC 86 select BCM_NET_PHYLIB 87 ---help--- 88 This PHY driver is for the 1G internal PHYs of the Broadcom 89 Cygnus Family SoC. 90 91 Currently supports internal PHY's used in the BCM11300, 92 BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, 93 BCM58303 & BCM58305 Broadcom Cygnus SoCs. 94 95config BCM63XX_PHY 96 tristate "Drivers for Broadcom 63xx SOCs internal PHY" 97 depends on BCM63XX 98 select BCM_NET_PHYLIB 99 ---help--- 100 Currently supports the 6348 and 6358 PHYs. 101 102config BCM7XXX_PHY 103 tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" 104 select BCM_NET_PHYLIB 105 ---help--- 106 Currently supports the BCM7366, BCM7439, BCM7445, and 107 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. 108 109config BCM87XX_PHY 110 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" 111 help 112 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. 113 114config ICPLUS_PHY 115 tristate "Drivers for ICPlus PHYs" 116 ---help--- 117 Currently supports the IP175C and IP1001 PHYs. 118 119config REALTEK_PHY 120 tristate "Drivers for Realtek PHYs" 121 ---help--- 122 Supports the Realtek 821x PHY. 123 124config NATIONAL_PHY 125 tristate "Drivers for National Semiconductor PHYs" 126 ---help--- 127 Currently supports the DP83865 PHY. 128 129config STE10XP 130 tristate "Driver for STMicroelectronics STe10Xp PHYs" 131 ---help--- 132 This is the driver for the STe100p and STe101p PHYs. 133 134config LSI_ET1011C_PHY 135 tristate "Driver for LSI ET1011C PHY" 136 ---help--- 137 Supports the LSI ET1011C PHY. 138 139config MICREL_PHY 140 tristate "Driver for Micrel PHYs" 141 ---help--- 142 Supports the KSZ9021, VSC8201, KS8001 PHYs. 143 144config DP83848_PHY 145 tristate "Driver for Texas Instruments DP83848 PHY" 146 ---help--- 147 Supports the DP83848 PHY. 148 149config DP83867_PHY 150 tristate "Drivers for Texas Instruments DP83867 Gigabit PHY" 151 ---help--- 152 Currently supports the DP83867 PHY. 153 154config MICROCHIP_PHY 155 tristate "Drivers for Microchip PHYs" 156 help 157 Supports the LAN88XX PHYs. 158 159config FIXED_PHY 160 tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" 161 depends on PHYLIB 162 ---help--- 163 Adds the platform "fixed" MDIO Bus to cover the boards that use 164 PHYs that are not connected to the real MDIO bus. 165 166 Currently tested with mpc866ads and mpc8349e-mitx. 167 168config MDIO_BITBANG 169 tristate "Support for bitbanged MDIO buses" 170 help 171 This module implements the MDIO bus protocol in software, 172 for use by low level drivers that export the ability to 173 drive the relevant pins. 174 175 If in doubt, say N. 176 177config MDIO_GPIO 178 tristate "Support for GPIO lib-based bitbanged MDIO buses" 179 depends on MDIO_BITBANG && GPIOLIB 180 ---help--- 181 Supports GPIO lib-based MDIO busses. 182 183 To compile this driver as a module, choose M here: the module 184 will be called mdio-gpio. 185 186config MDIO_OCTEON 187 tristate "Support for MDIO buses on Octeon and ThunderX SOCs" 188 depends on 64BIT 189 help 190 191 This module provides a driver for the Octeon and ThunderX MDIO 192 busses. It is required by the Octeon and ThunderX ethernet device 193 drivers. 194 195config MDIO_SUN4I 196 tristate "Allwinner sun4i MDIO interface support" 197 depends on ARCH_SUNXI 198 help 199 This driver supports the MDIO interface found in the network 200 interface units of the Allwinner SoC that have an EMAC (A10, 201 A12, A10s, etc.) 202 203config MDIO_MOXART 204 tristate "MOXA ART MDIO interface support" 205 depends on ARCH_MOXART 206 help 207 This driver supports the MDIO interface found in the network 208 interface units of the MOXA ART SoC 209 210config MDIO_BUS_MUX 211 tristate 212 depends on OF_MDIO 213 help 214 This module provides a driver framework for MDIO bus 215 multiplexers which connect one of several child MDIO busses 216 to a parent bus. Switching between child busses is done by 217 device specific drivers. 218 219config MDIO_BUS_MUX_GPIO 220 tristate "Support for GPIO controlled MDIO bus multiplexers" 221 depends on OF_GPIO && OF_MDIO 222 select MDIO_BUS_MUX 223 help 224 This module provides a driver for MDIO bus multiplexers that 225 are controlled via GPIO lines. The multiplexer connects one of 226 several child MDIO busses to a parent bus. Child bus 227 selection is under the control of GPIO lines. 228 229config MDIO_BUS_MUX_MMIOREG 230 tristate "Support for MMIO device-controlled MDIO bus multiplexers" 231 depends on OF_MDIO && HAS_IOMEM 232 select MDIO_BUS_MUX 233 help 234 This module provides a driver for MDIO bus multiplexers that 235 are controlled via a simple memory-mapped device, like an FPGA. 236 The multiplexer connects one of several child MDIO busses to a 237 parent bus. Child bus selection is under the control of one of 238 the FPGA's registers. 239 240 Currently, only 8-bit registers are supported. 241 242config MDIO_BCM_UNIMAC 243 tristate "Broadcom UniMAC MDIO bus controller" 244 depends on HAS_IOMEM 245 help 246 This module provides a driver for the Broadcom UniMAC MDIO busses. 247 This hardware can be found in the Broadcom GENET Ethernet MAC 248 controllers as well as some Broadcom Ethernet switches such as the 249 Starfighter 2 switches. 250 251config MDIO_BCM_IPROC 252 tristate "Broadcom iProc MDIO bus controller" 253 depends on ARCH_BCM_IPROC || COMPILE_TEST 254 depends on HAS_IOMEM && OF_MDIO 255 help 256 This module provides a driver for the MDIO busses found in the 257 Broadcom iProc SoC's. 258 259endif # PHYLIB 260 261config MICREL_KS8995MA 262 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" 263 depends on SPI 264