net: phy: Introduce Airoha AN8801R Gigabit Ethernet PHY driver

Introduce a driver for the Airoha AN8801R Series Gigabit Ethernet
PHY; this currently supports setting up PHY LEDs, 10/100M, 1000M
spee

net: phy: Introduce Airoha AN8801R Gigabit Ethernet PHY driver

Introduce a driver for the Airoha AN8801R Series Gigabit Ethernet
PHY; this currently supports setting up PHY LEDs, 10/100M, 1000M
speeds, and Wake on LAN and PHY interrupts.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-5-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: Add Airoha phy library for shared code

In preparation of Airoha AN8801R PHY support, split out the interface
functions that will be common between the already present air_en8811h
driver an

net: phy: Add Airoha phy library for shared code

In preparation of Airoha AN8801R PHY support, split out the interface
functions that will be common between the already present air_en8811h
driver and the new one, and put them into a new library named
air_phy_lib.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-2-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: intel-xway: fix typo in Kconfig description

Replace "22E" with "22F" in the description.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/2026050921090

net: phy: intel-xway: fix typo in Kconfig description

Replace "22E" with "22F" in the description.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260509210900.3968447-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: remove Kconfig symbol MDIO_BUS

After usage of config symbol MDIO_BUS has been removed from REGMAP_MIO
as last user, the symbol can be removed.

Signed-off-by: Heiner Kallweit <hkallweit1@g

net: phy: remove Kconfig symbol MDIO_BUS

After usage of config symbol MDIO_BUS has been removed from REGMAP_MIO
as last user, the symbol can be removed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/9cdf83e9-470d-45da-8efe-ace0decf0204@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: air_en8811h: deprecate "airoha,pnswap-rx" and "airoha,pnswap-tx"

Prefer the new "rx-polarity" and "tx-polarity" properties, and use the
vendor specific ones as fallback if the standard des

net: phy: air_en8811h: deprecate "airoha,pnswap-rx" and "airoha,pnswap-tx"

Prefer the new "rx-polarity" and "tx-polarity" properties, and use the
vendor specific ones as fallback if the standard description doesn't
exist.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260119091220.1493761-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: microchip_t1s: add support for Microchip LAN867X Rev.D0 PHY

Add support for the LAN8670/1/2 Rev.D0 10BASE-T1S PHYs from Microchip.
The new Rev.D0 silicon requires a specific set of initial

net: phy: microchip_t1s: add support for Microchip LAN867X Rev.D0 PHY

Add support for the LAN8670/1/2 Rev.D0 10BASE-T1S PHYs from Microchip.
The new Rev.D0 silicon requires a specific set of initialization
settings to be configured for optimal performance and compliance with
OPEN Alliance specifications, as described in Microchip Application Note
AN1699 (Revision G, DS60001699G – October 2025).
https://www.microchip.com/en-us/application-notes/an1699

Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251030102258.180061-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: move config symbol MDIO_BUS to drivers/net/phy/Kconfig

Config symbol MDIO_BUS isn't used in drivers/net/mdio. It's only used
in drivers/net/phy. So move it there.

Signed-off-by: Heiner Ka

net: phy: move config symbol MDIO_BUS to drivers/net/phy/Kconfig

Config symbol MDIO_BUS isn't used in drivers/net/mdio. It's only used
in drivers/net/phy. So move it there.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/164ff1c6-2cf9-4e30-80fb-da4cc7165dc8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: micrel: Update Kconfig help text

This driver by now supports 17 different Microchip (formerly known as
Micrel) chips: KSZ9021, KSZ9031, KSZ9131, KSZ8001, KS8737, KSZ8021,
KSZ8031, KSZ8041,

net: phy: micrel: Update Kconfig help text

This driver by now supports 17 different Microchip (formerly known as
Micrel) chips: KSZ9021, KSZ9031, KSZ9131, KSZ8001, KS8737, KSZ8021,
KSZ8031, KSZ8041, KSZ8051, KSZ8061, KSZ8081, KSZ8873MLL, KSZ886X,
KSZ9477, LAN8814, LAN8804 and LAN8841.

Support for the VSC8201 was removed in commit 51f932c4870f ("micrel phy
driver - updated(1)")

Update the help text to reflect that, list families instead of models to
ease future maintenance.

Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250911-micrel-kconfig-v2-1-e8f295059050@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.17-rc6).

Conflicts:

net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipa

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.17-rc6).

Conflicts:

net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")

Only trivial adjacent changes (in a doc and a Makefile).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: NXP_TJA11XX: Update Kconfig with TJA1102 support

Update the Kconfig description to indicate support for the TJA1102.

Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.

net: phy: NXP_TJA11XX: Update Kconfig with TJA1102 support

Update the Kconfig description to indicate support for the TJA1102.

Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20250905-tja1102-kconfig-v1-1-a57e6ac4e264@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: Move KS8995 to the DSA subsystem

By reading the datasheets for the KS8995 it is obvious that this
is a 100 Mbit DSA switch.

Let us start the refactoring by moving it to the DSA subsystem

net: dsa: Move KS8995 to the DSA subsystem

By reading the datasheets for the KS8995 it is obvious that this
is a 100 Mbit DSA switch.

Let us start the refactoring by moving it to the DSA subsystem to
preserve development history.

Verified that the chip still probes the same after this patch
provided CONFIG_HAVE_NET_DSA, CONFIG_NET_DSA and CONFIG_DSA_KS8995
are selected.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250813-ks8995-to-dsa-v1-1-75c359ede3a5@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: add Kconfig symbol PHY_PACKAGE

Only a handful of PHY drivers needs the PHY package functionality,
therefore build the module only if needed.

Signed-off-by: Heiner Kallweit <hkallweit1@gma

net: phy: add Kconfig symbol PHY_PACKAGE

Only a handful of PHY drivers needs the PHY package functionality,
therefore build the module only if needed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/42c05496-61b2-4b09-b853-3d99b3dfe95c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: add driver for MaxLinear MxL86110 PHY

Add support for the MaxLinear MxL86110 Gigabit Ethernet PHY, a low-power,
cost-optimized transceiver supporting 10/100/1000 Mbps over twisted-pair
cop

net: phy: add driver for MaxLinear MxL86110 PHY

Add support for the MaxLinear MxL86110 Gigabit Ethernet PHY, a low-power,
cost-optimized transceiver supporting 10/100/1000 Mbps over twisted-pair
copper, compliant with IEEE 802.3.

The driver implements basic features such as:
- Device initialization
- RGMII interface timing configuration
- Wake-on-LAN support
- LED initialization and control via /sys/class/leds

This driver has been tested on multiple Variscite boards, including:
- VAR-SOM-MX93 (i.MX93)
- VAR-SOM-MX8M-PLUS (i.MX8MP)

Example boot log showing driver probe:
[ 7.692101] imx-dwmac 428a0000.ethernet eth0:
PHY [stmmac-0:00] driver [MXL86110 Gigabit Ethernet] (irq=POLL)

Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250521212821.593057-1-stefano.radaelli21@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: phy: Add support for Aeonsemi AS21xxx PHYs

Add support for Aeonsemi AS21xxx 10G C45 PHYs. These PHYs integrate
an IPC to setup some configuration and require special handling to
sync with the p

net: phy: Add support for Aeonsemi AS21xxx PHYs

Add support for Aeonsemi AS21xxx 10G C45 PHYs. These PHYs integrate
an IPC to setup some configuration and require special handling to
sync with the parity bit. The parity bit is a way the IPC use to
follow correct order of command sent.

Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7510
before the firmware is loaded.

They all support up to 5 LEDs with various HW mode supported.

While implementing it was found some strange coincidence with using the
same logic for implementing C22 in MMD regs in Broadcom PHYs.

For reference here the AS21xxx PHY name logic:

AS21x1xxB1
^ ^^
| |J: Supports SyncE/PTP
| |P: No SyncE/PTP support
| 1: Supports 2nd Serdes
| 2: Not 2nd Serdes support
0: 10G, 5G, 2.5G
5: 5G, 2.5G
2: 2.5G

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-6-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: make mdio consumer / device layer a separate module

After having factored out the provider part from mdio_bus.c, we can
make the mdio consumer / device layer a separate module. This also
a

net: phy: make mdio consumer / device layer a separate module

After having factored out the provider part from mdio_bus.c, we can
make the mdio consumer / device layer a separate module. This also
allows to remove Kconfig symbol MDIO_DEVICE.
The module init / exit functions from mdio_bus.c no longer have to be
called from phy_device.c. The link order defined in
drivers/net/phy/Makefile ensures that init / exit functions are called
in the right order.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dba6b156-5748-44ce-b5e2-e8dc2fcee5a7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: phy: remove Kconfig symbol MDIO_DEVRES

MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.

Note: Due to circular module dependencies we

net: phy: remove Kconfig symbol MDIO_DEVRES

MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.

Note: Due to circular module dependencies we can't simply
make mdio_devres.c part of phylib.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/27cba535-f507-4b32-84a3-0744c783a465@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: remove redundant dependency on NETDEVICES for PHYLINK and PHYLIB

drivers/net/phy/Kconfig is included from drivers/net/Kconfig in an
"if NETDEVICES" section. Therefore we don't have to dupl

net: phy: remove redundant dependency on NETDEVICES for PHYLINK and PHYLIB

drivers/net/phy/Kconfig is included from drivers/net/Kconfig in an
"if NETDEVICES" section. Therefore we don't have to duplicate the
dependency here. And if e.g. PHYLINK is selected somewhere, then the
dependency is ignored anyway (see note in Kconfig help).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/085892cd-aa11-4c22-bf8a-574a5c6dcd7c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: nxp-c45-tja11xx: add support for TJA1121

Add support for TJA1121 which is based on TJA1120 but with
additional MACsec IP.

Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com>
Reviewed

net: phy: nxp-c45-tja11xx: add support for TJA1121

Add support for TJA1121 which is based on TJA1120 but with
additional MACsec IP.

Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250228154320.2979000-3-andrei.botila@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: move realtek PHY driver to its own subdirectory

In preparation of adding a source file with hwmon support, move the
Realtek PHY driver to its own subdirectory and rename realtek.c to
realt

net: phy: move realtek PHY driver to its own subdirectory

In preparation of adding a source file with hwmon support, move the
Realtek PHY driver to its own subdirectory and rename realtek.c to
realtek_main.c.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/c566551b-c915-4e34-9b33-129a6ddd6e4c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: microchip_t1: depend on PTP_1588_CLOCK_OPTIONAL

When microchip_t1_phy is built in and phyptp is module
facing undefined reference issue. This get fixed when
microchip_t1_phy made dependent

net: phy: microchip_t1: depend on PTP_1588_CLOCK_OPTIONAL

When microchip_t1_phy is built in and phyptp is module
facing undefined reference issue. This get fixed when
microchip_t1_phy made dependent on PTP_1588_CLOCK_OPTIONAL.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501090604.YEoJXCXi-lkp@intel.com
Fixes: fa51199c5f34 ("net: phy: microchip_rds_ptp : Add rds ptp library for Microchip phys")
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20250110054424.16807-1-divya.koppera@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: phy: Kconfig: Add rds ptp library support and 1588 optional flag in Microchip phys

Add ptp library support in Kconfig
As some of Microchip T1 phys support ptp, add dependency
of 1588 optional f

net: phy: Kconfig: Add rds ptp library support and 1588 optional flag in Microchip phys

Add ptp library support in Kconfig
As some of Microchip T1 phys support ptp, add dependency
of 1588 optional flag in Kconfig

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20241219123311.30213-4-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: mediatek: Re-organize MediaTek ethernet phy drivers

Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: M

net: phy: mediatek: Re-organize MediaTek ethernet phy drivers

Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: phy: microchip_t1s: add support for Microchip's LAN867X Rev.C2

Add support for LAN8670/1/2 Rev.C2 as per the latest configuration note
AN1699 released (Revision E (DS60001699F - June 2024)) for

net: phy: microchip_t1s: add support for Microchip's LAN867X Rev.C2

Add support for LAN8670/1/2 Rev.C2 as per the latest configuration note
AN1699 released (Revision E (DS60001699F - June 2024)) for Rev.C1 is also
applicable for Rev.C2. Refer hardware revisions list in the latest AN1699
Revision E (DS60001699F - June 2024).
https://www.microchip.com/en-us/application-notes/an1699

Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-7-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: microchip_t1s: add support for Microchip's LAN867X Rev.C1

Add support for LAN8670/1/2 Rev.C1 as per the latest configuration note
AN1699 released (Revision E (DS60001699F - June 2024)).
ht

net: phy: microchip_t1s: add support for Microchip's LAN867X Rev.C1

Add support for LAN8670/1/2 Rev.C1 as per the latest configuration note
AN1699 released (Revision E (DS60001699F - June 2024)).
https://www.microchip.com/en-us/application-notes/an1699

Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-6-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: phy: microchip_t1s: add support for Microchip's LAN865X Rev.B1

Add support for LAN8650/1 Rev.B1. As per the latest configuration note
AN1760 released (Revision F (DS60001760G - June 2024)) for

net: phy: microchip_t1s: add support for Microchip's LAN865X Rev.B1

Add support for LAN8650/1 Rev.B1. As per the latest configuration note
AN1760 released (Revision F (DS60001760G - June 2024)) for Rev.B0 is also
applicable for Rev.B1. Refer hardware revisions list in the latest AN1760
Revision F (DS60001760G - June 2024).
https://www.microchip.com/en-us/application-notes/an1760

Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-4-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...