1# 2# PHY Layer Configuration 3# 4 5menuconfig PHYLIB 6 tristate "PHY Device support and infrastructure" 7 depends on !S390 8 depends on NETDEVICES 9 help 10 Ethernet controllers are usually attached to PHY 11 devices. This option provides infrastructure for 12 managing PHY devices. 13 14if PHYLIB 15 16comment "MII PHY device drivers" 17 18config AT803X_PHY 19 tristate "Drivers for Atheros AT803X PHYs" 20 ---help--- 21 Currently supports the AT8030 and AT8035 model 22 23config AMD_PHY 24 tristate "Drivers for the AMD PHYs" 25 ---help--- 26 Currently supports the am79c874 27 28config MARVELL_PHY 29 tristate "Drivers for Marvell PHYs" 30 ---help--- 31 Currently has a driver for the 88E1011S 32 33config DAVICOM_PHY 34 tristate "Drivers for Davicom PHYs" 35 ---help--- 36 Currently supports dm9161e and dm9131 37 38config QSEMI_PHY 39 tristate "Drivers for Quality Semiconductor PHYs" 40 ---help--- 41 Currently supports the qs6612 42 43config LXT_PHY 44 tristate "Drivers for the Intel LXT PHYs" 45 ---help--- 46 Currently supports the lxt970, lxt971 47 48config CICADA_PHY 49 tristate "Drivers for the Cicada PHYs" 50 ---help--- 51 Currently supports the cis8204 52 53config VITESSE_PHY 54 tristate "Drivers for the Vitesse PHYs" 55 ---help--- 56 Currently supports the vsc8244 57 58config SMSC_PHY 59 tristate "Drivers for SMSC PHYs" 60 ---help--- 61 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs 62 63config BROADCOM_PHY 64 tristate "Drivers for Broadcom PHYs" 65 ---help--- 66 Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 67 and BCM5482 PHYs. 68 69config BCM63XX_PHY 70 tristate "Drivers for Broadcom 63xx SOCs internal PHY" 71 depends on BCM63XX 72 ---help--- 73 Currently supports the 6348 and 6358 PHYs. 74 75config BCM87XX_PHY 76 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" 77 help 78 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. 79 80config ICPLUS_PHY 81 tristate "Drivers for ICPlus PHYs" 82 ---help--- 83 Currently supports the IP175C and IP1001 PHYs. 84 85config REALTEK_PHY 86 tristate "Drivers for Realtek PHYs" 87 ---help--- 88 Supports the Realtek 821x PHY. 89 90config NATIONAL_PHY 91 tristate "Drivers for National Semiconductor PHYs" 92 ---help--- 93 Currently supports the DP83865 PHY. 94 95config STE10XP 96 tristate "Driver for STMicroelectronics STe10Xp PHYs" 97 ---help--- 98 This is the driver for the STe100p and STe101p PHYs. 99 100config LSI_ET1011C_PHY 101 tristate "Driver for LSI ET1011C PHY" 102 ---help--- 103 Supports the LSI ET1011C PHY. 104 105config MICREL_PHY 106 tristate "Driver for Micrel PHYs" 107 ---help--- 108 Supports the KSZ9021, VSC8201, KS8001 PHYs. 109 110config FIXED_PHY 111 bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" 112 depends on PHYLIB=y 113 ---help--- 114 Adds the platform "fixed" MDIO Bus to cover the boards that use 115 PHYs that are not connected to the real MDIO bus. 116 117 Currently tested with mpc866ads and mpc8349e-mitx. 118 119config MDIO_BITBANG 120 tristate "Support for bitbanged MDIO buses" 121 help 122 This module implements the MDIO bus protocol in software, 123 for use by low level drivers that export the ability to 124 drive the relevant pins. 125 126 If in doubt, say N. 127 128config MDIO_GPIO 129 tristate "Support for GPIO lib-based bitbanged MDIO buses" 130 depends on MDIO_BITBANG && GENERIC_GPIO 131 ---help--- 132 Supports GPIO lib-based MDIO busses. 133 134 To compile this driver as a module, choose M here: the module 135 will be called mdio-gpio. 136 137config MDIO_OCTEON 138 tristate "Support for MDIO buses on Octeon SOCs" 139 depends on CPU_CAVIUM_OCTEON 140 default y 141 help 142 143 This module provides a driver for the Octeon MDIO busses. 144 It is required by the Octeon Ethernet device drivers. 145 146 If in doubt, say Y. 147 148config MDIO_BUS_MUX 149 tristate 150 depends on OF_MDIO 151 help 152 This module provides a driver framework for MDIO bus 153 multiplexers which connect one of several child MDIO busses 154 to a parent bus. Switching between child busses is done by 155 device specific drivers. 156 157config MDIO_BUS_MUX_GPIO 158 tristate "Support for GPIO controlled MDIO bus multiplexers" 159 depends on OF_GPIO && OF_MDIO 160 select MDIO_BUS_MUX 161 help 162 This module provides a driver for MDIO bus multiplexers that 163 are controlled via GPIO lines. The multiplexer connects one of 164 several child MDIO busses to a parent bus. Child bus 165 selection is under the control of GPIO lines. 166 167config MDIO_BUS_MUX_MMIOREG 168 tristate "Support for MMIO device-controlled MDIO bus multiplexers" 169 depends on OF_MDIO 170 select MDIO_BUS_MUX 171 help 172 This module provides a driver for MDIO bus multiplexers that 173 are controlled via a simple memory-mapped device, like an FPGA. 174 The multiplexer connects one of several child MDIO busses to a 175 parent bus. Child bus selection is under the control of one of 176 the FPGA's registers. 177 178 Currently, only 8-bit registers are supported. 179 180endif # PHYLIB 181 182config MICREL_KS8995MA 183 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" 184 depends on SPI 185