1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (c) 2014-2015 Hisilicon Limited.
4 */
5
6 #include <linux/acpi.h>
7 #include <linux/errno.h>
8 #include <linux/etherdevice.h>
9 #include <linux/init.h>
10 #include <linux/kernel.h>
11 #include <linux/mfd/syscon.h>
12 #include <linux/module.h>
13 #include <linux/mutex.h>
14 #include <linux/netdevice.h>
15 #include <linux/of_address.h>
16 #include <linux/of.h>
17 #include <linux/of_mdio.h>
18 #include <linux/of_platform.h>
19 #include <linux/phy.h>
20 #include <linux/platform_device.h>
21 #include <linux/regmap.h>
22
23 #define MDIO_DRV_NAME "Hi-HNS_MDIO"
24 #define MDIO_BUS_NAME "Hisilicon MII Bus"
25
26 #define MDIO_TIMEOUT 1000000
27
28 struct hns_mdio_sc_reg {
29 u16 mdio_clk_en;
30 u16 mdio_clk_dis;
31 u16 mdio_reset_req;
32 u16 mdio_reset_dreq;
33 u16 mdio_clk_st;
34 u16 mdio_reset_st;
35 };
36
37 struct hns_mdio_device {
38 u8 __iomem *vbase; /* mdio reg base address */
39 struct regmap *subctrl_vbase;
40 struct hns_mdio_sc_reg sc_reg;
41 };
42
43 /* mdio reg */
44 #define MDIO_COMMAND_REG 0x0
45 #define MDIO_ADDR_REG 0x4
46 #define MDIO_WDATA_REG 0x8
47 #define MDIO_RDATA_REG 0xc
48 #define MDIO_STA_REG 0x10
49
50 /* cfg phy bit map */
51 #define MDIO_CMD_DEVAD_M 0x1f
52 #define MDIO_CMD_DEVAD_S 0
53 #define MDIO_CMD_PRTAD_M 0x1f
54 #define MDIO_CMD_PRTAD_S 5
55 #define MDIO_CMD_OP_S 10
56 #define MDIO_CMD_ST_S 12
57 #define MDIO_CMD_START_B 14
58
59 #define MDIO_ADDR_DATA_M 0xffff
60 #define MDIO_ADDR_DATA_S 0
61
62 #define MDIO_WDATA_DATA_M 0xffff
63 #define MDIO_WDATA_DATA_S 0
64
65 #define MDIO_RDATA_DATA_M 0xffff
66 #define MDIO_RDATA_DATA_S 0
67
68 #define MDIO_STATE_STA_B 0
69
70 enum mdio_st_clause {
71 MDIO_ST_CLAUSE_45 = 0,
72 MDIO_ST_CLAUSE_22
73 };
74
75 enum mdio_c22_op_seq {
76 MDIO_C22_WRITE = 1,
77 MDIO_C22_READ = 2
78 };
79
80 enum mdio_c45_op_seq {
81 MDIO_C45_WRITE_ADDR = 0,
82 MDIO_C45_WRITE_DATA,
83 MDIO_C45_READ_INCREMENT,
84 MDIO_C45_READ
85 };
86
87 /* peri subctrl reg */
88 #define MDIO_SC_CLK_EN 0x338
89 #define MDIO_SC_CLK_DIS 0x33C
90 #define MDIO_SC_RESET_REQ 0xA38
91 #define MDIO_SC_RESET_DREQ 0xA3C
92 #define MDIO_SC_CLK_ST 0x531C
93 #define MDIO_SC_RESET_ST 0x5A1C
94
mdio_write_reg(u8 __iomem * base,u32 reg,u32 value)95 static void mdio_write_reg(u8 __iomem *base, u32 reg, u32 value)
96 {
97 writel_relaxed(value, base + reg);
98 }
99
100 #define MDIO_WRITE_REG(a, reg, value) \
101 mdio_write_reg((a)->vbase, (reg), (value))
102
mdio_read_reg(u8 __iomem * base,u32 reg)103 static u32 mdio_read_reg(u8 __iomem *base, u32 reg)
104 {
105 return readl_relaxed(base + reg);
106 }
107
108 #define mdio_set_field(origin, mask, shift, val) \
109 do { \
110 (origin) &= (~((mask) << (shift))); \
111 (origin) |= (((val) & (mask)) << (shift)); \
112 } while (0)
113
114 #define mdio_get_field(origin, mask, shift) (((origin) >> (shift)) & (mask))
115
mdio_set_reg_field(u8 __iomem * base,u32 reg,u32 mask,u32 shift,u32 val)116 static void mdio_set_reg_field(u8 __iomem *base, u32 reg, u32 mask, u32 shift,
117 u32 val)
118 {
119 u32 origin = mdio_read_reg(base, reg);
120
121 mdio_set_field(origin, mask, shift, val);
122 mdio_write_reg(base, reg, origin);
123 }
124
125 #define MDIO_SET_REG_FIELD(dev, reg, mask, shift, val) \
126 mdio_set_reg_field((dev)->vbase, (reg), (mask), (shift), (val))
127
mdio_get_reg_field(u8 __iomem * base,u32 reg,u32 mask,u32 shift)128 static u32 mdio_get_reg_field(u8 __iomem *base, u32 reg, u32 mask, u32 shift)
129 {
130 u32 origin;
131
132 origin = mdio_read_reg(base, reg);
133 return mdio_get_field(origin, mask, shift);
134 }
135
136 #define MDIO_GET_REG_FIELD(dev, reg, mask, shift) \
137 mdio_get_reg_field((dev)->vbase, (reg), (mask), (shift))
138
139 #define MDIO_GET_REG_BIT(dev, reg, bit) \
140 mdio_get_reg_field((dev)->vbase, (reg), 0x1ull, (bit))
141
142 #define MDIO_CHECK_SET_ST 1
143 #define MDIO_CHECK_CLR_ST 0
144
mdio_sc_cfg_reg_write(struct hns_mdio_device * mdio_dev,u32 cfg_reg,u32 set_val,u32 st_reg,u32 st_msk,u8 check_st)145 static int mdio_sc_cfg_reg_write(struct hns_mdio_device *mdio_dev,
146 u32 cfg_reg, u32 set_val,
147 u32 st_reg, u32 st_msk, u8 check_st)
148 {
149 u32 time_cnt;
150 u32 reg_value;
151 int ret;
152
153 regmap_write(mdio_dev->subctrl_vbase, cfg_reg, set_val);
154
155 for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) {
156 ret = regmap_read(mdio_dev->subctrl_vbase, st_reg, ®_value);
157 if (ret)
158 return ret;
159
160 reg_value &= st_msk;
161 if ((!!check_st) == (!!reg_value))
162 break;
163 }
164
165 if ((!!check_st) != (!!reg_value))
166 return -EBUSY;
167
168 return 0;
169 }
170
hns_mdio_wait_ready(struct mii_bus * bus)171 static int hns_mdio_wait_ready(struct mii_bus *bus)
172 {
173 struct hns_mdio_device *mdio_dev = bus->priv;
174 u32 cmd_reg_value;
175 int i;
176
177 /* waiting for MDIO_COMMAND_REG's mdio_start==0 */
178 /* after that can do read or write*/
179 for (i = 0; i < MDIO_TIMEOUT; i++) {
180 cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev,
181 MDIO_COMMAND_REG,
182 MDIO_CMD_START_B);
183 if (!cmd_reg_value)
184 break;
185 }
186 if ((i == MDIO_TIMEOUT) && cmd_reg_value)
187 return -ETIMEDOUT;
188
189 return 0;
190 }
191
hns_mdio_cmd_write(struct hns_mdio_device * mdio_dev,u8 is_c45,u8 op,u8 phy_id,u16 cmd)192 static void hns_mdio_cmd_write(struct hns_mdio_device *mdio_dev,
193 u8 is_c45, u8 op, u8 phy_id, u16 cmd)
194 {
195 u32 cmd_reg_value;
196 u8 st = is_c45 ? MDIO_ST_CLAUSE_45 : MDIO_ST_CLAUSE_22;
197
198 cmd_reg_value = st << MDIO_CMD_ST_S;
199 cmd_reg_value |= op << MDIO_CMD_OP_S;
200 cmd_reg_value |=
201 (phy_id & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S;
202 cmd_reg_value |= (cmd & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S;
203 cmd_reg_value |= 1 << MDIO_CMD_START_B;
204
205 MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value);
206 }
207
208 /**
209 * hns_mdio_write_c22 - access phy register
210 * @bus: mdio bus
211 * @phy_id: phy id
212 * @regnum: register num
213 * @data: register value
214 *
215 * Return 0 on success, negative on failure
216 */
hns_mdio_write_c22(struct mii_bus * bus,int phy_id,int regnum,u16 data)217 static int hns_mdio_write_c22(struct mii_bus *bus,
218 int phy_id, int regnum, u16 data)
219 {
220 struct hns_mdio_device *mdio_dev = bus->priv;
221 u16 reg = (u16)(regnum & 0xffff);
222 u16 cmd_reg_cfg;
223 int ret;
224 u8 op;
225
226 dev_dbg(&bus->dev, "mdio write %s,base is %p\n",
227 bus->id, mdio_dev->vbase);
228 dev_dbg(&bus->dev, "phy id=%d, reg=%#x, write data=%d\n",
229 phy_id, reg, data);
230
231 /* wait for ready */
232 ret = hns_mdio_wait_ready(bus);
233 if (ret) {
234 dev_err(&bus->dev, "MDIO bus is busy\n");
235 return ret;
236 }
237
238 cmd_reg_cfg = reg;
239 op = MDIO_C22_WRITE;
240
241 MDIO_SET_REG_FIELD(mdio_dev, MDIO_WDATA_REG, MDIO_WDATA_DATA_M,
242 MDIO_WDATA_DATA_S, data);
243
244 hns_mdio_cmd_write(mdio_dev, false, op, phy_id, cmd_reg_cfg);
245
246 return 0;
247 }
248
249 /**
250 * hns_mdio_write_c45 - access phy register
251 * @bus: mdio bus
252 * @phy_id: phy id
253 * @devad: device address to read
254 * @regnum: register num
255 * @data: register value
256 *
257 * Return 0 on success, negative on failure
258 */
hns_mdio_write_c45(struct mii_bus * bus,int phy_id,int devad,int regnum,u16 data)259 static int hns_mdio_write_c45(struct mii_bus *bus, int phy_id, int devad,
260 int regnum, u16 data)
261 {
262 struct hns_mdio_device *mdio_dev = bus->priv;
263 u16 reg = (u16)(regnum & 0xffff);
264 u16 cmd_reg_cfg;
265 int ret;
266 u8 op;
267
268 dev_dbg(&bus->dev, "mdio write %s,base is %p\n",
269 bus->id, mdio_dev->vbase);
270 dev_dbg(&bus->dev, "phy id=%d, devad=%d, reg=%#x, write data=%d\n",
271 phy_id, devad, reg, data);
272
273 /* wait for ready */
274 ret = hns_mdio_wait_ready(bus);
275 if (ret) {
276 dev_err(&bus->dev, "MDIO bus is busy\n");
277 return ret;
278 }
279
280 /* config the cmd-reg to write addr*/
281 MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M,
282 MDIO_ADDR_DATA_S, reg);
283
284 hns_mdio_cmd_write(mdio_dev, true, MDIO_C45_WRITE_ADDR, phy_id, devad);
285
286 /* check for read or write opt is finished */
287 ret = hns_mdio_wait_ready(bus);
288 if (ret) {
289 dev_err(&bus->dev, "MDIO bus is busy\n");
290 return ret;
291 }
292
293 /* config the data needed writing */
294 cmd_reg_cfg = devad;
295 op = MDIO_C45_WRITE_DATA;
296
297 MDIO_SET_REG_FIELD(mdio_dev, MDIO_WDATA_REG, MDIO_WDATA_DATA_M,
298 MDIO_WDATA_DATA_S, data);
299
300 hns_mdio_cmd_write(mdio_dev, true, op, phy_id, cmd_reg_cfg);
301
302 return 0;
303 }
304
305 /**
306 * hns_mdio_read_c22 - access phy register
307 * @bus: mdio bus
308 * @phy_id: phy id
309 * @regnum: register num
310 *
311 * Return phy register value
312 */
hns_mdio_read_c22(struct mii_bus * bus,int phy_id,int regnum)313 static int hns_mdio_read_c22(struct mii_bus *bus, int phy_id, int regnum)
314 {
315 struct hns_mdio_device *mdio_dev = bus->priv;
316 u16 reg = (u16)(regnum & 0xffff);
317 u16 reg_val;
318 int ret;
319
320 dev_dbg(&bus->dev, "mdio read %s,base is %p\n",
321 bus->id, mdio_dev->vbase);
322 dev_dbg(&bus->dev, "phy id=%d, reg=%#x!\n", phy_id, reg);
323
324 /* Step 1: wait for ready */
325 ret = hns_mdio_wait_ready(bus);
326 if (ret) {
327 dev_err(&bus->dev, "MDIO bus is busy\n");
328 return ret;
329 }
330
331 hns_mdio_cmd_write(mdio_dev, false, MDIO_C22_READ, phy_id, reg);
332
333 /* Step 2: waiting for MDIO_COMMAND_REG 's mdio_start==0,*/
334 /* check for read or write opt is finished */
335 ret = hns_mdio_wait_ready(bus);
336 if (ret) {
337 dev_err(&bus->dev, "MDIO bus is busy\n");
338 return ret;
339 }
340
341 reg_val = MDIO_GET_REG_BIT(mdio_dev, MDIO_STA_REG, MDIO_STATE_STA_B);
342 if (reg_val) {
343 dev_err(&bus->dev, " ERROR! MDIO Read failed!\n");
344 return -EBUSY;
345 }
346
347 /* Step 3; get out data*/
348 reg_val = (u16)MDIO_GET_REG_FIELD(mdio_dev, MDIO_RDATA_REG,
349 MDIO_RDATA_DATA_M, MDIO_RDATA_DATA_S);
350
351 return reg_val;
352 }
353
354 /**
355 * hns_mdio_read_c45 - access phy register
356 * @bus: mdio bus
357 * @phy_id: phy id
358 * @devad: device address to read
359 * @regnum: register num
360 *
361 * Return phy register value
362 */
hns_mdio_read_c45(struct mii_bus * bus,int phy_id,int devad,int regnum)363 static int hns_mdio_read_c45(struct mii_bus *bus, int phy_id, int devad,
364 int regnum)
365 {
366 struct hns_mdio_device *mdio_dev = bus->priv;
367 u16 reg = (u16)(regnum & 0xffff);
368 u16 reg_val;
369 int ret;
370
371 dev_dbg(&bus->dev, "mdio read %s,base is %p\n",
372 bus->id, mdio_dev->vbase);
373 dev_dbg(&bus->dev, "phy id=%d, devad=%d, reg=%#x!\n",
374 phy_id, devad, reg);
375
376 /* Step 1: wait for ready */
377 ret = hns_mdio_wait_ready(bus);
378 if (ret) {
379 dev_err(&bus->dev, "MDIO bus is busy\n");
380 return ret;
381 }
382
383 MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M,
384 MDIO_ADDR_DATA_S, reg);
385
386 /* Step 2; config the cmd-reg to write addr*/
387 hns_mdio_cmd_write(mdio_dev, true, MDIO_C45_WRITE_ADDR, phy_id, devad);
388
389 /* Step 3: check for read or write opt is finished */
390 ret = hns_mdio_wait_ready(bus);
391 if (ret) {
392 dev_err(&bus->dev, "MDIO bus is busy\n");
393 return ret;
394 }
395
396 hns_mdio_cmd_write(mdio_dev, true, MDIO_C45_READ, phy_id, devad);
397
398 /* Step 5: waiting for MDIO_COMMAND_REG 's mdio_start==0,*/
399 /* check for read or write opt is finished */
400 ret = hns_mdio_wait_ready(bus);
401 if (ret) {
402 dev_err(&bus->dev, "MDIO bus is busy\n");
403 return ret;
404 }
405
406 reg_val = MDIO_GET_REG_BIT(mdio_dev, MDIO_STA_REG, MDIO_STATE_STA_B);
407 if (reg_val) {
408 dev_err(&bus->dev, " ERROR! MDIO Read failed!\n");
409 return -EBUSY;
410 }
411
412 /* Step 6; get out data*/
413 reg_val = (u16)MDIO_GET_REG_FIELD(mdio_dev, MDIO_RDATA_REG,
414 MDIO_RDATA_DATA_M, MDIO_RDATA_DATA_S);
415
416 return reg_val;
417 }
418
419 /**
420 * hns_mdio_reset - reset mdio bus
421 * @bus: mdio bus
422 *
423 * Return 0 on success, negative on failure
424 */
hns_mdio_reset(struct mii_bus * bus)425 static int hns_mdio_reset(struct mii_bus *bus)
426 {
427 struct hns_mdio_device *mdio_dev = bus->priv;
428 const struct hns_mdio_sc_reg *sc_reg;
429 int ret;
430
431 if (dev_of_node(bus->parent)) {
432 if (!mdio_dev->subctrl_vbase) {
433 dev_err(&bus->dev, "mdio sys ctl reg has not mapped\n");
434 return -ENODEV;
435 }
436
437 sc_reg = &mdio_dev->sc_reg;
438 /* 1. reset req, and read reset st check */
439 ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_reset_req,
440 0x1, sc_reg->mdio_reset_st, 0x1,
441 MDIO_CHECK_SET_ST);
442 if (ret) {
443 dev_err(&bus->dev, "MDIO reset fail\n");
444 return ret;
445 }
446
447 /* 2. dis clk, and read clk st check */
448 ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_clk_dis,
449 0x1, sc_reg->mdio_clk_st, 0x1,
450 MDIO_CHECK_CLR_ST);
451 if (ret) {
452 dev_err(&bus->dev, "MDIO dis clk fail\n");
453 return ret;
454 }
455
456 /* 3. reset dreq, and read reset st check */
457 ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_reset_dreq,
458 0x1, sc_reg->mdio_reset_st, 0x1,
459 MDIO_CHECK_CLR_ST);
460 if (ret) {
461 dev_err(&bus->dev, "MDIO dis clk fail\n");
462 return ret;
463 }
464
465 /* 4. en clk, and read clk st check */
466 ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_clk_en,
467 0x1, sc_reg->mdio_clk_st, 0x1,
468 MDIO_CHECK_SET_ST);
469 if (ret)
470 dev_err(&bus->dev, "MDIO en clk fail\n");
471 } else if (is_acpi_node(bus->parent->fwnode)) {
472 acpi_status s;
473
474 s = acpi_evaluate_object(ACPI_HANDLE(bus->parent),
475 "_RST", NULL, NULL);
476 if (ACPI_FAILURE(s)) {
477 dev_err(&bus->dev, "Reset failed, return:%#x\n", s);
478 ret = -EBUSY;
479 } else {
480 ret = 0;
481 }
482 } else {
483 dev_err(&bus->dev, "Can not get cfg data from DT or ACPI\n");
484 ret = -ENXIO;
485 }
486 return ret;
487 }
488
489 /**
490 * hns_mdio_probe - probe mdio device
491 * @pdev: mdio platform device
492 *
493 * Return 0 on success, negative on failure
494 */
hns_mdio_probe(struct platform_device * pdev)495 static int hns_mdio_probe(struct platform_device *pdev)
496 {
497 struct hns_mdio_device *mdio_dev;
498 struct mii_bus *new_bus;
499 int ret;
500
501 if (!pdev) {
502 dev_err(NULL, "pdev is NULL!\r\n");
503 return -ENODEV;
504 }
505
506 mdio_dev = devm_kzalloc(&pdev->dev, sizeof(*mdio_dev), GFP_KERNEL);
507 if (!mdio_dev)
508 return -ENOMEM;
509
510 new_bus = devm_mdiobus_alloc(&pdev->dev);
511 if (!new_bus) {
512 dev_err(&pdev->dev, "mdiobus_alloc fail!\n");
513 return -ENOMEM;
514 }
515
516 new_bus->name = MDIO_BUS_NAME;
517 new_bus->read = hns_mdio_read_c22;
518 new_bus->write = hns_mdio_write_c22;
519 new_bus->read_c45 = hns_mdio_read_c45;
520 new_bus->write_c45 = hns_mdio_write_c45;
521 new_bus->reset = hns_mdio_reset;
522 new_bus->priv = mdio_dev;
523 new_bus->parent = &pdev->dev;
524
525 mdio_dev->vbase = devm_platform_ioremap_resource(pdev, 0);
526 if (IS_ERR(mdio_dev->vbase)) {
527 ret = PTR_ERR(mdio_dev->vbase);
528 return ret;
529 }
530
531 platform_set_drvdata(pdev, new_bus);
532 snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%s", "Mii",
533 dev_name(&pdev->dev));
534 if (dev_of_node(&pdev->dev)) {
535 struct of_phandle_args reg_args;
536
537 ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
538 "subctrl-vbase",
539 4,
540 0,
541 ®_args);
542 if (!ret) {
543 mdio_dev->subctrl_vbase =
544 syscon_node_to_regmap(reg_args.np);
545 if (IS_ERR(mdio_dev->subctrl_vbase)) {
546 dev_warn(&pdev->dev, "syscon_node_to_regmap error\n");
547 mdio_dev->subctrl_vbase = NULL;
548 } else {
549 if (reg_args.args_count == 4) {
550 mdio_dev->sc_reg.mdio_clk_en =
551 (u16)reg_args.args[0];
552 mdio_dev->sc_reg.mdio_clk_dis =
553 (u16)reg_args.args[0] + 4;
554 mdio_dev->sc_reg.mdio_reset_req =
555 (u16)reg_args.args[1];
556 mdio_dev->sc_reg.mdio_reset_dreq =
557 (u16)reg_args.args[1] + 4;
558 mdio_dev->sc_reg.mdio_clk_st =
559 (u16)reg_args.args[2];
560 mdio_dev->sc_reg.mdio_reset_st =
561 (u16)reg_args.args[3];
562 } else {
563 /* for compatible */
564 mdio_dev->sc_reg.mdio_clk_en =
565 MDIO_SC_CLK_EN;
566 mdio_dev->sc_reg.mdio_clk_dis =
567 MDIO_SC_CLK_DIS;
568 mdio_dev->sc_reg.mdio_reset_req =
569 MDIO_SC_RESET_REQ;
570 mdio_dev->sc_reg.mdio_reset_dreq =
571 MDIO_SC_RESET_DREQ;
572 mdio_dev->sc_reg.mdio_clk_st =
573 MDIO_SC_CLK_ST;
574 mdio_dev->sc_reg.mdio_reset_st =
575 MDIO_SC_RESET_ST;
576 }
577 }
578 of_node_put(reg_args.np);
579 } else {
580 dev_warn(&pdev->dev, "find syscon ret = %#x\n", ret);
581 mdio_dev->subctrl_vbase = NULL;
582 }
583
584 ret = of_mdiobus_register(new_bus, pdev->dev.of_node);
585 } else if (is_acpi_node(pdev->dev.fwnode)) {
586 /* Clear all the IRQ properties */
587 memset(new_bus->irq, PHY_POLL, 4 * PHY_MAX_ADDR);
588
589 /* Mask out all PHYs from auto probing. */
590 new_bus->phy_mask = ~0;
591
592 /* Register the MDIO bus */
593 ret = mdiobus_register(new_bus);
594 } else {
595 dev_err(&pdev->dev, "Can not get cfg data from DT or ACPI\n");
596 ret = -ENXIO;
597 }
598
599 if (ret) {
600 dev_err(&pdev->dev, "Cannot register as MDIO bus!\n");
601 platform_set_drvdata(pdev, NULL);
602 return ret;
603 }
604
605 return 0;
606 }
607
608 /**
609 * hns_mdio_remove - remove mdio device
610 * @pdev: mdio platform device
611 *
612 * Return 0 on success, negative on failure
613 */
hns_mdio_remove(struct platform_device * pdev)614 static void hns_mdio_remove(struct platform_device *pdev)
615 {
616 struct mii_bus *bus;
617
618 bus = platform_get_drvdata(pdev);
619
620 mdiobus_unregister(bus);
621 platform_set_drvdata(pdev, NULL);
622 }
623
624 static const struct of_device_id hns_mdio_match[] = {
625 {.compatible = "hisilicon,mdio"},
626 {.compatible = "hisilicon,hns-mdio"},
627 {}
628 };
629 MODULE_DEVICE_TABLE(of, hns_mdio_match);
630
631 static const struct acpi_device_id hns_mdio_acpi_match[] = {
632 { "HISI0141", 0 },
633 { },
634 };
635 MODULE_DEVICE_TABLE(acpi, hns_mdio_acpi_match);
636
637 static struct platform_driver hns_mdio_driver = {
638 .probe = hns_mdio_probe,
639 .remove_new = hns_mdio_remove,
640 .driver = {
641 .name = MDIO_DRV_NAME,
642 .of_match_table = hns_mdio_match,
643 .acpi_match_table = ACPI_PTR(hns_mdio_acpi_match),
644 },
645 };
646
647 module_platform_driver(hns_mdio_driver);
648
649 MODULE_LICENSE("GPL");
650 MODULE_AUTHOR("Huawei Tech. Co., Ltd.");
651 MODULE_DESCRIPTION("Hisilicon HNS MDIO driver");
652 MODULE_ALIAS("platform:" MDIO_DRV_NAME);
653