1# SPDX-License-Identifier: GPL-2.0-only 2# 3# 8390 device configuration 4# 5 6config NET_VENDOR_8390 7 bool "National Semiconductor 8390 devices" 8 default y 9 depends on NET_VENDOR_NATSEMI 10 ---help--- 11 If you have a network (Ethernet) card belonging to this class, say Y. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about National Semiconductor 8390 cards. If you say Y, 16 you will be asked for your specific card in the following questions. 17 18if NET_VENDOR_8390 19 20config PCMCIA_AXNET 21 tristate "Asix AX88190 PCMCIA support" 22 depends on PCMCIA 23 ---help--- 24 Say Y here if you intend to attach an Asix AX88190-based PCMCIA 25 (PC-card) Fast Ethernet card to your computer. These cards are 26 nearly NE2000 compatible but need a separate driver due to a few 27 misfeatures. 28 29 To compile this driver as a module, choose M here: the module will be 30 called axnet_cs. If unsure, say N. 31 32config AX88796 33 tristate "ASIX AX88796 NE2000 clone support" if !ZORRO 34 depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST) 35 select CRC32 36 select PHYLIB 37 select MDIO_BITBANG 38 ---help--- 39 AX88796 driver, using platform bus to provide 40 chip detection and resources 41 42config AX88796_93CX6 43 bool "ASIX AX88796 external 93CX6 eeprom support" 44 depends on AX88796 45 select EEPROM_93CX6 46 ---help--- 47 Select this if your platform comes with an external 93CX6 eeprom. 48 49config XSURF100 50 tristate "Amiga XSurf 100 AX88796/NE2000 clone support" 51 depends on ZORRO 52 select AX88796 53 select AX88796B_PHY 54 help 55 This driver is for the Individual Computers X-Surf 100 Ethernet 56 card (based on the Asix AX88796 chip). If you have such a card, 57 say Y. Otherwise, say N. 58 59 To compile this driver as a module, choose M here: the module 60 will be called xsurf100. 61 62config HYDRA 63 tristate "Hydra support" 64 depends on ZORRO 65 select CRC32 66 ---help--- 67 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. 68 69 To compile this driver as a module, choose M here: the module 70 will be called hydra. 71 72config ARM_ETHERH 73 tristate "I-cubed EtherH/ANT EtherM support" 74 depends on ARM && ARCH_ACORN 75 select CRC32 76 ---help--- 77 If you have an Acorn system with one of these network cards, you 78 should say Y to this option if you wish to use it with Linux. 79 80config MAC8390 81 tristate "Macintosh NS 8390 based ethernet cards" 82 depends on MAC 83 select CRC32 84 ---help--- 85 If you want to include a driver to support Nubus or LC-PDS 86 Ethernet cards using an NS8390 chipset or its equivalent, say Y. 87 88config MCF8390 89 tristate "ColdFire NS8390 based Ethernet support" 90 depends on COLDFIRE 91 select CRC32 92 ---help--- 93 This driver is for Ethernet devices using an NS8390-compatible 94 chipset on many common ColdFire CPU based boards. Many of the older 95 Freescale dev boards use this, and some other common boards like 96 some SnapGear routers do as well. 97 98 If you have one of these boards and want to use the network interface 99 on them then choose Y. To compile this driver as a module, choose M 100 here, the module will be called mcf8390. 101 102config NE2000 103 tristate "NE2000/NE1000 support" 104 depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC) 105 select CRC32 106 ---help--- 107 If you have a network (Ethernet) card of this type, say Y here. 108 Many Ethernet cards without a specific driver are compatible with 109 the NE2000. 110 111 If you have a PCI NE2000 card however, say N here and Y to "PCI 112 NE2000 and clone support" below. 113 114 To compile this driver as a module, choose M here. The module 115 will be called ne. 116 117config NE2K_PCI 118 tristate "PCI NE2000 and clones support (see help)" 119 depends on PCI 120 select CRC32 121 ---help--- 122 This driver is for NE2000 compatible PCI cards. It will not work 123 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 124 support" below). If you have a PCI NE2000 network (Ethernet) card, 125 say Y here. 126 127 This driver also works for the following NE2000 clone cards: 128 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 129 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond 130 Holtek HT80232 Holtek HT80229 131 132 To compile this driver as a module, choose M here. The module 133 will be called ne2k-pci. 134 135config APNE 136 tristate "PCMCIA NE2000 support" 137 depends on AMIGA_PCMCIA 138 select CRC32 139 ---help--- 140 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, 141 say N. 142 143 To compile this driver as a module, choose M here: the module 144 will be called apne. 145 146config PCMCIA_PCNET 147 tristate "NE2000 compatible PCMCIA support" 148 depends on PCMCIA 149 select CRC32 150 ---help--- 151 Say Y here if you intend to attach an NE2000 compatible PCMCIA 152 (PC-card) Ethernet or Fast Ethernet card to your computer. 153 154 To compile this driver as a module, choose M here: the module will be 155 called pcnet_cs. If unsure, say N. 156 157config STNIC 158 tristate "National DP83902AV support" 159 depends on SUPERH 160 select CRC32 161 ---help--- 162 Support for cards based on the National Semiconductor DP83902AV 163 ST-NIC Serial Network Interface Controller for Twisted Pair. This 164 is a 10Mbit/sec Ethernet controller. Product overview and specs at 165 <http://www.national.com/pf/DP/DP83902A.html>. 166 167 If unsure, say N. 168 169config ULTRA 170 tristate "SMC Ultra support" 171 depends on ISA 172 select CRC32 173 ---help--- 174 If you have a network (Ethernet) card of this type, say Y here. 175 176 Important: There have been many reports that, with some motherboards 177 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, 178 such as some BusLogic models) causes corruption problems with many 179 operating systems. The Linux smc-ultra driver has a work-around for 180 this but keep it in mind if you have such a SCSI card and have 181 problems. 182 183 To compile this driver as a module, choose M here. The module 184 will be called smc-ultra. 185 186config WD80x3 187 tristate "WD80*3 support" 188 depends on ISA 189 select CRC32 190 ---help--- 191 If you have a network (Ethernet) card of this type, say Y here. 192 193 To compile this driver as a module, choose M here. The module 194 will be called wd. 195 196config ZORRO8390 197 tristate "Zorro NS8390-based Ethernet support" 198 depends on ZORRO 199 select CRC32 200 ---help--- 201 This driver is for Zorro Ethernet cards using an NS8390-compatible 202 chipset, like the Village Tronic Ariadne II and the Individual 203 Computers X-Surf Ethernet cards. If you have such a card, say Y. 204 Otherwise, say N. 205 206 To compile this driver as a module, choose M here: the module 207 will be called zorro8390. 208 209endif # NET_VENDOR_8390 210