1# SPDX-License-Identifier: GPL-2.0-only 2# 3# 8390 device configuration 4# 5 6config NET_VENDOR_8390 7 bool "National Semiconductor 8390 devices" 8 default y 9 depends on NET_VENDOR_NATSEMI 10 help 11 If you have a network (Ethernet) card belonging to this class, say Y. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about National Semiconductor 8390 cards. If you say Y, 16 you will be asked for your specific card in the following questions. 17 18if NET_VENDOR_8390 19 20config PCMCIA_AXNET 21 tristate "Asix AX88190 PCMCIA support" 22 depends on PCMCIA && HAS_IOPORT 23 help 24 Say Y here if you intend to attach an Asix AX88190-based PCMCIA 25 (PC-card) Fast Ethernet card to your computer. These cards are 26 nearly NE2000 compatible but need a separate driver due to a few 27 misfeatures. 28 29 To compile this driver as a module, choose M here: the module will be 30 called axnet_cs. If unsure, say N. 31 32config AX88796 33 tristate "ASIX AX88796 NE2000 clone support" if !ZORRO 34 depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST) 35 select CRC32 36 select PHYLIB 37 select MDIO_BITBANG 38 help 39 AX88796 driver, using platform bus to provide 40 chip detection and resources 41 42config AX88796_93CX6 43 bool "ASIX AX88796 external 93CX6 eeprom support" 44 depends on AX88796 45 select EEPROM_93CX6 46 help 47 Select this if your platform comes with an external 93CX6 eeprom. 48 49config XSURF100 50 tristate "Amiga XSurf 100 AX88796/NE2000 clone support" 51 depends on ZORRO 52 select AX88796 53 select AX88796B_PHY 54 help 55 This driver is for the Individual Computers X-Surf 100 Ethernet 56 card (based on the Asix AX88796 chip). If you have such a card, 57 say Y. Otherwise, say N. 58 59 To compile this driver as a module, choose M here: the module 60 will be called xsurf100. 61 62config HYDRA 63 tristate "Hydra support" 64 depends on ZORRO 65 select CRC32 66 help 67 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. 68 69 To compile this driver as a module, choose M here: the module 70 will be called hydra. 71 72config ARM_ETHERH 73 tristate "I-cubed EtherH/ANT EtherM support" 74 depends on ARM && ARCH_ACORN 75 select CRC32 76 help 77 If you have an Acorn system with one of these network cards, you 78 should say Y to this option if you wish to use it with Linux. 79 80config MAC8390 81 tristate "Macintosh NS 8390 based ethernet cards" 82 depends on MAC 83 select CRC32 84 help 85 If you want to include a driver to support Nubus or LC-PDS 86 Ethernet cards using an NS8390 chipset or its equivalent, say Y. 87 88config MCF8390 89 tristate "ColdFire NS8390 based Ethernet support" 90 depends on COLDFIRE 91 select CRC32 92 help 93 This driver is for Ethernet devices using an NS8390-compatible 94 chipset on many common ColdFire CPU based boards. Many of the older 95 Freescale dev boards use this, and some other common boards like 96 some SnapGear routers do as well. 97 98 If you have one of these boards and want to use the network interface 99 on them then choose Y. To compile this driver as a module, choose M 100 here, the module will be called mcf8390. 101 102config NE2000 103 tristate "NE2000/NE1000 support" 104 depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC) 105 select NETDEV_LEGACY_INIT if ISA 106 select CRC32 107 help 108 If you have a network (Ethernet) card of this type, say Y here. 109 Many Ethernet cards without a specific driver are compatible with 110 the NE2000. 111 112 If you have a PCI NE2000 card however, say N here and Y to "PCI 113 NE2000 and clone support" below. 114 115 To compile this driver as a module, choose M here. The module 116 will be called ne. 117 118config NE2K_PCI 119 tristate "PCI NE2000 and clones support (see help)" 120 depends on PCI && HAS_IOPORT 121 select CRC32 122 help 123 This driver is for NE2000 compatible PCI cards. It will not work 124 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 125 support" below). If you have a PCI NE2000 network (Ethernet) card, 126 say Y here. 127 128 This driver also works for the following NE2000 clone cards: 129 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 130 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond 131 Holtek HT80232 Holtek HT80229 132 133 To compile this driver as a module, choose M here. The module 134 will be called ne2k-pci. 135 136config APNE 137 tristate "PCMCIA NE2000 support" 138 depends on AMIGA_PCMCIA 139 select CRC32 140 help 141 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, 142 say N. 143 144 To compile this driver as a module, choose M here: the module 145 will be called apne. 146 147config PCMCIA_PCNET 148 tristate "NE2000 compatible PCMCIA support" 149 depends on PCMCIA && HAS_IOPORT 150 select CRC32 151 help 152 Say Y here if you intend to attach an NE2000 compatible PCMCIA 153 (PC-card) Ethernet or Fast Ethernet card to your computer. 154 155 To compile this driver as a module, choose M here: the module will be 156 called pcnet_cs. If unsure, say N. 157 158config STNIC 159 tristate "National DP83902AV support" 160 depends on SUPERH 161 select CRC32 162 help 163 Support for cards based on the National Semiconductor DP83902AV 164 ST-NIC Serial Network Interface Controller for Twisted Pair. This 165 is a 10Mbit/sec Ethernet controller. Product overview and specs at 166 <http://www.national.com/pf/DP/DP83902A.html>. 167 168 If unsure, say N. 169 170config ULTRA 171 tristate "SMC Ultra support" 172 depends on ISA 173 select NETDEV_LEGACY_INIT 174 select CRC32 175 help 176 If you have a network (Ethernet) card of this type, say Y here. 177 178 Important: There have been many reports that, with some motherboards 179 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, 180 such as some BusLogic models) causes corruption problems with many 181 operating systems. The Linux smc-ultra driver has a work-around for 182 this but keep it in mind if you have such a SCSI card and have 183 problems. 184 185 To compile this driver as a module, choose M here. The module 186 will be called smc-ultra. 187 188config WD80x3 189 tristate "WD80*3 support" 190 depends on ISA 191 select NETDEV_LEGACY_INIT 192 select CRC32 193 help 194 If you have a network (Ethernet) card of this type, say Y here. 195 196 To compile this driver as a module, choose M here. The module 197 will be called wd. 198 199config ZORRO8390 200 tristate "Zorro NS8390-based Ethernet support" 201 depends on ZORRO 202 select CRC32 203 help 204 This driver is for Zorro Ethernet cards using an NS8390-compatible 205 chipset, like the Village Tronic Ariadne II and the Individual 206 Computers X-Surf Ethernet cards. If you have such a card, say Y. 207 Otherwise, say N. 208 209 To compile this driver as a module, choose M here: the module 210 will be called zorro8390. 211 212endif # NET_VENDOR_8390 213