1 // SPDX-License-Identifier: GPL-2.0 2 /* Fintek F81604 USB-to-2CAN controller driver. 3 * 4 * Copyright (C) 2023 Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw> 5 */ 6 #include <linux/bitfield.h> 7 #include <linux/netdevice.h> 8 #include <linux/units.h> 9 #include <linux/usb.h> 10 11 #include <linux/can.h> 12 #include <linux/can/dev.h> 13 #include <linux/can/error.h> 14 #include <linux/can/platform/sja1000.h> 15 16 #include <asm-generic/unaligned.h> 17 18 /* vendor and product id */ 19 #define F81604_VENDOR_ID 0x2c42 20 #define F81604_PRODUCT_ID 0x1709 21 #define F81604_CAN_CLOCK (12 * MEGA) 22 #define F81604_MAX_DEV 2 23 #define F81604_SET_DEVICE_RETRY 10 24 25 #define F81604_USB_TIMEOUT 2000 26 #define F81604_SET_GET_REGISTER 0xA0 27 #define F81604_PORT_OFFSET 0x1000 28 #define F81604_MAX_RX_URBS 4 29 30 #define F81604_CMD_DATA 0x00 31 32 #define F81604_DLC_LEN_MASK GENMASK(3, 0) 33 #define F81604_DLC_EFF_BIT BIT(7) 34 #define F81604_DLC_RTR_BIT BIT(6) 35 36 #define F81604_SFF_SHIFT 5 37 #define F81604_EFF_SHIFT 3 38 39 #define F81604_BRP_MASK GENMASK(5, 0) 40 #define F81604_SJW_MASK GENMASK(7, 6) 41 42 #define F81604_SEG1_MASK GENMASK(3, 0) 43 #define F81604_SEG2_MASK GENMASK(6, 4) 44 45 #define F81604_CLEAR_ALC 0 46 #define F81604_CLEAR_ECC 1 47 #define F81604_CLEAR_OVERRUN 2 48 49 /* device setting */ 50 #define F81604_CTRL_MODE_REG 0x80 51 #define F81604_TX_ONESHOT (0x03 << 3) 52 #define F81604_TX_NORMAL (0x01 << 3) 53 #define F81604_RX_AUTO_RELEASE_BUF BIT(1) 54 #define F81604_INT_WHEN_CHANGE BIT(0) 55 56 #define F81604_TERMINATOR_REG 0x105 57 #define F81604_CAN0_TERM BIT(2) 58 #define F81604_CAN1_TERM BIT(3) 59 60 #define F81604_TERMINATION_DISABLED CAN_TERMINATION_DISABLED 61 #define F81604_TERMINATION_ENABLED 120 62 63 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */ 64 #define F81604_SJA1000_MOD 0x00 65 #define F81604_SJA1000_CMR 0x01 66 #define F81604_SJA1000_IR 0x03 67 #define F81604_SJA1000_IER 0x04 68 #define F81604_SJA1000_ALC 0x0B 69 #define F81604_SJA1000_ECC 0x0C 70 #define F81604_SJA1000_RXERR 0x0E 71 #define F81604_SJA1000_TXERR 0x0F 72 #define F81604_SJA1000_ACCC0 0x10 73 #define F81604_SJA1000_ACCM0 0x14 74 #define F81604_MAX_FILTER_CNT 4 75 76 /* Common registers - manual section 6.5 */ 77 #define F81604_SJA1000_BTR0 0x06 78 #define F81604_SJA1000_BTR1 0x07 79 #define F81604_SJA1000_BTR1_SAMPLE_TRIPLE BIT(7) 80 #define F81604_SJA1000_OCR 0x08 81 #define F81604_SJA1000_CDR 0x1F 82 83 /* mode register */ 84 #define F81604_SJA1000_MOD_RM 0x01 85 #define F81604_SJA1000_MOD_LOM 0x02 86 #define F81604_SJA1000_MOD_STM 0x04 87 88 /* commands */ 89 #define F81604_SJA1000_CMD_CDO 0x08 90 91 /* interrupt sources */ 92 #define F81604_SJA1000_IRQ_BEI 0x80 93 #define F81604_SJA1000_IRQ_ALI 0x40 94 #define F81604_SJA1000_IRQ_EPI 0x20 95 #define F81604_SJA1000_IRQ_DOI 0x08 96 #define F81604_SJA1000_IRQ_EI 0x04 97 #define F81604_SJA1000_IRQ_TI 0x02 98 #define F81604_SJA1000_IRQ_RI 0x01 99 #define F81604_SJA1000_IRQ_ALL 0xFF 100 #define F81604_SJA1000_IRQ_OFF 0x00 101 102 /* status register content */ 103 #define F81604_SJA1000_SR_BS 0x80 104 #define F81604_SJA1000_SR_ES 0x40 105 #define F81604_SJA1000_SR_TCS 0x08 106 107 /* ECC register */ 108 #define F81604_SJA1000_ECC_SEG 0x1F 109 #define F81604_SJA1000_ECC_DIR 0x20 110 #define F81604_SJA1000_ECC_BIT 0x00 111 #define F81604_SJA1000_ECC_FORM 0x40 112 #define F81604_SJA1000_ECC_STUFF 0x80 113 #define F81604_SJA1000_ECC_MASK 0xc0 114 115 /* ALC register */ 116 #define F81604_SJA1000_ALC_MASK 0x1f 117 118 /* table of devices that work with this driver */ 119 static const struct usb_device_id f81604_table[] = { 120 { USB_DEVICE(F81604_VENDOR_ID, F81604_PRODUCT_ID) }, 121 {} /* Terminating entry */ 122 }; 123 124 MODULE_DEVICE_TABLE(usb, f81604_table); 125 126 static const struct ethtool_ops f81604_ethtool_ops = { 127 .get_ts_info = ethtool_op_get_ts_info, 128 }; 129 130 static const u16 f81604_termination[] = { F81604_TERMINATION_DISABLED, 131 F81604_TERMINATION_ENABLED }; 132 133 struct f81604_priv { 134 struct net_device *netdev[F81604_MAX_DEV]; 135 }; 136 137 struct f81604_port_priv { 138 struct can_priv can; 139 struct net_device *netdev; 140 struct sk_buff *echo_skb; 141 142 unsigned long clear_flags; 143 struct work_struct clear_reg_work; 144 145 struct usb_device *dev; 146 struct usb_interface *intf; 147 148 struct usb_anchor urbs_anchor; 149 }; 150 151 /* Interrupt endpoint data format: 152 * Byte 0: Status register. 153 * Byte 1: Interrupt register. 154 * Byte 2: Interrupt enable register. 155 * Byte 3: Arbitration lost capture(ALC) register. 156 * Byte 4: Error code capture(ECC) register. 157 * Byte 5: Error warning limit register. 158 * Byte 6: RX error counter register. 159 * Byte 7: TX error counter register. 160 * Byte 8: Reserved. 161 */ 162 struct f81604_int_data { 163 u8 sr; 164 u8 isrc; 165 u8 ier; 166 u8 alc; 167 u8 ecc; 168 u8 ewlr; 169 u8 rxerr; 170 u8 txerr; 171 u8 val; 172 } __packed __aligned(4); 173 174 struct f81604_sff { 175 __be16 id; 176 u8 data[CAN_MAX_DLEN]; 177 } __packed __aligned(2); 178 179 struct f81604_eff { 180 __be32 id; 181 u8 data[CAN_MAX_DLEN]; 182 } __packed __aligned(2); 183 184 struct f81604_can_frame { 185 u8 cmd; 186 187 /* According for F81604 DLC define: 188 * bit 3~0: data length (0~8) 189 * bit6: is RTR flag. 190 * bit7: is EFF frame. 191 */ 192 u8 dlc; 193 194 union { 195 struct f81604_sff sff; 196 struct f81604_eff eff; 197 }; 198 } __packed __aligned(2); 199 200 static const u8 bulk_in_addr[F81604_MAX_DEV] = { 2, 4 }; 201 static const u8 bulk_out_addr[F81604_MAX_DEV] = { 1, 3 }; 202 static const u8 int_in_addr[F81604_MAX_DEV] = { 1, 3 }; 203 204 static int f81604_write(struct usb_device *dev, u16 reg, u8 data) 205 { 206 int ret; 207 208 ret = usb_control_msg_send(dev, 0, F81604_SET_GET_REGISTER, 209 USB_TYPE_VENDOR | USB_DIR_OUT, 0, reg, 210 &data, sizeof(data), F81604_USB_TIMEOUT, 211 GFP_KERNEL); 212 if (ret) 213 dev_err(&dev->dev, "%s: reg: %x data: %x failed: %pe\n", 214 __func__, reg, data, ERR_PTR(ret)); 215 216 return ret; 217 } 218 219 static int f81604_read(struct usb_device *dev, u16 reg, u8 *data) 220 { 221 int ret; 222 223 ret = usb_control_msg_recv(dev, 0, F81604_SET_GET_REGISTER, 224 USB_TYPE_VENDOR | USB_DIR_IN, 0, reg, data, 225 sizeof(*data), F81604_USB_TIMEOUT, 226 GFP_KERNEL); 227 228 if (ret < 0) 229 dev_err(&dev->dev, "%s: reg: %x failed: %pe\n", __func__, reg, 230 ERR_PTR(ret)); 231 232 return ret; 233 } 234 235 static int f81604_update_bits(struct usb_device *dev, u16 reg, u8 mask, 236 u8 data) 237 { 238 int ret; 239 u8 tmp; 240 241 ret = f81604_read(dev, reg, &tmp); 242 if (ret) 243 return ret; 244 245 tmp &= ~mask; 246 tmp |= (mask & data); 247 248 return f81604_write(dev, reg, tmp); 249 } 250 251 static int f81604_sja1000_write(struct f81604_port_priv *priv, u16 reg, 252 u8 data) 253 { 254 int port = priv->netdev->dev_port; 255 int real_reg; 256 257 real_reg = reg + F81604_PORT_OFFSET * port + F81604_PORT_OFFSET; 258 return f81604_write(priv->dev, real_reg, data); 259 } 260 261 static int f81604_sja1000_read(struct f81604_port_priv *priv, u16 reg, 262 u8 *data) 263 { 264 int port = priv->netdev->dev_port; 265 int real_reg; 266 267 real_reg = reg + F81604_PORT_OFFSET * port + F81604_PORT_OFFSET; 268 return f81604_read(priv->dev, real_reg, data); 269 } 270 271 static int f81604_set_reset_mode(struct f81604_port_priv *priv) 272 { 273 int ret, i; 274 u8 tmp; 275 276 /* disable interrupts */ 277 ret = f81604_sja1000_write(priv, F81604_SJA1000_IER, 278 F81604_SJA1000_IRQ_OFF); 279 if (ret) 280 return ret; 281 282 for (i = 0; i < F81604_SET_DEVICE_RETRY; i++) { 283 ret = f81604_sja1000_read(priv, F81604_SJA1000_MOD, &tmp); 284 if (ret) 285 return ret; 286 287 /* check reset bit */ 288 if (tmp & F81604_SJA1000_MOD_RM) { 289 priv->can.state = CAN_STATE_STOPPED; 290 return 0; 291 } 292 293 /* reset chip */ 294 ret = f81604_sja1000_write(priv, F81604_SJA1000_MOD, 295 F81604_SJA1000_MOD_RM); 296 if (ret) 297 return ret; 298 } 299 300 return -EPERM; 301 } 302 303 static int f81604_set_normal_mode(struct f81604_port_priv *priv) 304 { 305 u8 tmp, ier = 0; 306 u8 mod_reg = 0; 307 int ret, i; 308 309 for (i = 0; i < F81604_SET_DEVICE_RETRY; i++) { 310 ret = f81604_sja1000_read(priv, F81604_SJA1000_MOD, &tmp); 311 if (ret) 312 return ret; 313 314 /* check reset bit */ 315 if ((tmp & F81604_SJA1000_MOD_RM) == 0) { 316 priv->can.state = CAN_STATE_ERROR_ACTIVE; 317 /* enable interrupts, RI handled by bulk-in */ 318 ier = F81604_SJA1000_IRQ_ALL & ~F81604_SJA1000_IRQ_RI; 319 if (!(priv->can.ctrlmode & 320 CAN_CTRLMODE_BERR_REPORTING)) 321 ier &= ~F81604_SJA1000_IRQ_BEI; 322 323 return f81604_sja1000_write(priv, F81604_SJA1000_IER, 324 ier); 325 } 326 327 /* set chip to normal mode */ 328 if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) 329 mod_reg |= F81604_SJA1000_MOD_LOM; 330 if (priv->can.ctrlmode & CAN_CTRLMODE_PRESUME_ACK) 331 mod_reg |= F81604_SJA1000_MOD_STM; 332 333 ret = f81604_sja1000_write(priv, F81604_SJA1000_MOD, mod_reg); 334 if (ret) 335 return ret; 336 } 337 338 return -EPERM; 339 } 340 341 static int f81604_chipset_init(struct f81604_port_priv *priv) 342 { 343 int i, ret; 344 345 /* set clock divider and output control register */ 346 ret = f81604_sja1000_write(priv, F81604_SJA1000_CDR, 347 CDR_CBP | CDR_PELICAN); 348 if (ret) 349 return ret; 350 351 /* set acceptance filter (accept all) */ 352 for (i = 0; i < F81604_MAX_FILTER_CNT; ++i) { 353 ret = f81604_sja1000_write(priv, F81604_SJA1000_ACCC0 + i, 0); 354 if (ret) 355 return ret; 356 } 357 358 for (i = 0; i < F81604_MAX_FILTER_CNT; ++i) { 359 ret = f81604_sja1000_write(priv, F81604_SJA1000_ACCM0 + i, 360 0xFF); 361 if (ret) 362 return ret; 363 } 364 365 return f81604_sja1000_write(priv, F81604_SJA1000_OCR, 366 OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL | 367 OCR_MODE_NORMAL); 368 } 369 370 static void f81604_process_rx_packet(struct net_device *netdev, 371 struct f81604_can_frame *frame) 372 { 373 struct net_device_stats *stats = &netdev->stats; 374 struct can_frame *cf; 375 struct sk_buff *skb; 376 377 if (frame->cmd != F81604_CMD_DATA) 378 return; 379 380 skb = alloc_can_skb(netdev, &cf); 381 if (!skb) { 382 stats->rx_dropped++; 383 return; 384 } 385 386 cf->len = can_cc_dlc2len(frame->dlc & F81604_DLC_LEN_MASK); 387 388 if (frame->dlc & F81604_DLC_EFF_BIT) { 389 cf->can_id = get_unaligned_be32(&frame->eff.id) >> 390 F81604_EFF_SHIFT; 391 cf->can_id |= CAN_EFF_FLAG; 392 393 if (!(frame->dlc & F81604_DLC_RTR_BIT)) 394 memcpy(cf->data, frame->eff.data, cf->len); 395 } else { 396 cf->can_id = get_unaligned_be16(&frame->sff.id) >> 397 F81604_SFF_SHIFT; 398 399 if (!(frame->dlc & F81604_DLC_RTR_BIT)) 400 memcpy(cf->data, frame->sff.data, cf->len); 401 } 402 403 if (frame->dlc & F81604_DLC_RTR_BIT) 404 cf->can_id |= CAN_RTR_FLAG; 405 else 406 stats->rx_bytes += cf->len; 407 408 stats->rx_packets++; 409 netif_rx(skb); 410 } 411 412 static void f81604_read_bulk_callback(struct urb *urb) 413 { 414 struct f81604_can_frame *frame = urb->transfer_buffer; 415 struct net_device *netdev = urb->context; 416 int ret; 417 418 if (!netif_device_present(netdev)) 419 return; 420 421 if (urb->status) 422 netdev_info(netdev, "%s: URB aborted %pe\n", __func__, 423 ERR_PTR(urb->status)); 424 425 switch (urb->status) { 426 case 0: /* success */ 427 break; 428 429 case -ENOENT: 430 case -EPIPE: 431 case -EPROTO: 432 case -ESHUTDOWN: 433 return; 434 435 default: 436 goto resubmit_urb; 437 } 438 439 if (urb->actual_length != sizeof(*frame)) { 440 netdev_warn(netdev, "URB length %u not equal to %zu\n", 441 urb->actual_length, sizeof(*frame)); 442 goto resubmit_urb; 443 } 444 445 f81604_process_rx_packet(netdev, frame); 446 447 resubmit_urb: 448 ret = usb_submit_urb(urb, GFP_ATOMIC); 449 if (ret == -ENODEV) 450 netif_device_detach(netdev); 451 else if (ret) 452 netdev_err(netdev, 453 "%s: failed to resubmit read bulk urb: %pe\n", 454 __func__, ERR_PTR(ret)); 455 } 456 457 static void f81604_handle_tx(struct f81604_port_priv *priv, 458 struct f81604_int_data *data) 459 { 460 struct net_device *netdev = priv->netdev; 461 struct net_device_stats *stats = &netdev->stats; 462 463 /* transmission buffer released */ 464 if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT && 465 !(data->sr & F81604_SJA1000_SR_TCS)) { 466 stats->tx_errors++; 467 can_free_echo_skb(netdev, 0, NULL); 468 } else { 469 /* transmission complete */ 470 stats->tx_bytes += can_get_echo_skb(netdev, 0, NULL); 471 stats->tx_packets++; 472 } 473 474 netif_wake_queue(netdev); 475 } 476 477 static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv, 478 struct f81604_int_data *data) 479 { 480 enum can_state can_state = priv->can.state; 481 struct net_device *netdev = priv->netdev; 482 struct net_device_stats *stats = &netdev->stats; 483 struct can_frame *cf; 484 struct sk_buff *skb; 485 486 /* Note: ALC/ECC will not auto clear by read here, must be cleared by 487 * read register (via clear_reg_work). 488 */ 489 490 skb = alloc_can_err_skb(netdev, &cf); 491 if (skb) { 492 cf->can_id |= CAN_ERR_CNT; 493 cf->data[6] = data->txerr; 494 cf->data[7] = data->rxerr; 495 } 496 497 if (data->isrc & F81604_SJA1000_IRQ_DOI) { 498 /* data overrun interrupt */ 499 netdev_dbg(netdev, "data overrun interrupt\n"); 500 501 if (skb) { 502 cf->can_id |= CAN_ERR_CRTL; 503 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; 504 } 505 506 stats->rx_over_errors++; 507 stats->rx_errors++; 508 509 set_bit(F81604_CLEAR_OVERRUN, &priv->clear_flags); 510 } 511 512 if (data->isrc & F81604_SJA1000_IRQ_EI) { 513 /* error warning interrupt */ 514 netdev_dbg(netdev, "error warning interrupt\n"); 515 516 if (data->sr & F81604_SJA1000_SR_BS) 517 can_state = CAN_STATE_BUS_OFF; 518 else if (data->sr & F81604_SJA1000_SR_ES) 519 can_state = CAN_STATE_ERROR_WARNING; 520 else 521 can_state = CAN_STATE_ERROR_ACTIVE; 522 } 523 524 if (data->isrc & F81604_SJA1000_IRQ_BEI) { 525 /* bus error interrupt */ 526 netdev_dbg(netdev, "bus error interrupt\n"); 527 528 priv->can.can_stats.bus_error++; 529 stats->rx_errors++; 530 531 if (skb) { 532 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; 533 534 /* set error type */ 535 switch (data->ecc & F81604_SJA1000_ECC_MASK) { 536 case F81604_SJA1000_ECC_BIT: 537 cf->data[2] |= CAN_ERR_PROT_BIT; 538 break; 539 case F81604_SJA1000_ECC_FORM: 540 cf->data[2] |= CAN_ERR_PROT_FORM; 541 break; 542 case F81604_SJA1000_ECC_STUFF: 543 cf->data[2] |= CAN_ERR_PROT_STUFF; 544 break; 545 default: 546 break; 547 } 548 549 /* set error location */ 550 cf->data[3] = data->ecc & F81604_SJA1000_ECC_SEG; 551 552 /* Error occurred during transmission? */ 553 if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0) 554 cf->data[2] |= CAN_ERR_PROT_TX; 555 } 556 557 set_bit(F81604_CLEAR_ECC, &priv->clear_flags); 558 } 559 560 if (data->isrc & F81604_SJA1000_IRQ_EPI) { 561 if (can_state == CAN_STATE_ERROR_PASSIVE) 562 can_state = CAN_STATE_ERROR_WARNING; 563 else 564 can_state = CAN_STATE_ERROR_PASSIVE; 565 566 /* error passive interrupt */ 567 netdev_dbg(netdev, "error passive interrupt: %d\n", can_state); 568 } 569 570 if (data->isrc & F81604_SJA1000_IRQ_ALI) { 571 /* arbitration lost interrupt */ 572 netdev_dbg(netdev, "arbitration lost interrupt\n"); 573 574 priv->can.can_stats.arbitration_lost++; 575 576 if (skb) { 577 cf->can_id |= CAN_ERR_LOSTARB; 578 cf->data[0] = data->alc & F81604_SJA1000_ALC_MASK; 579 } 580 581 set_bit(F81604_CLEAR_ALC, &priv->clear_flags); 582 } 583 584 if (can_state != priv->can.state) { 585 enum can_state tx_state, rx_state; 586 587 tx_state = data->txerr >= data->rxerr ? can_state : 0; 588 rx_state = data->txerr <= data->rxerr ? can_state : 0; 589 590 can_change_state(netdev, cf, tx_state, rx_state); 591 592 if (can_state == CAN_STATE_BUS_OFF) 593 can_bus_off(netdev); 594 } 595 596 if (priv->clear_flags) 597 schedule_work(&priv->clear_reg_work); 598 599 if (skb) 600 netif_rx(skb); 601 } 602 603 static void f81604_read_int_callback(struct urb *urb) 604 { 605 struct f81604_int_data *data = urb->transfer_buffer; 606 struct net_device *netdev = urb->context; 607 struct f81604_port_priv *priv; 608 int ret; 609 610 priv = netdev_priv(netdev); 611 612 if (!netif_device_present(netdev)) 613 return; 614 615 if (urb->status) 616 netdev_info(netdev, "%s: Int URB aborted: %pe\n", __func__, 617 ERR_PTR(urb->status)); 618 619 switch (urb->status) { 620 case 0: /* success */ 621 break; 622 623 case -ENOENT: 624 case -EPIPE: 625 case -EPROTO: 626 case -ESHUTDOWN: 627 return; 628 629 default: 630 goto resubmit_urb; 631 } 632 633 /* handle Errors */ 634 if (data->isrc & (F81604_SJA1000_IRQ_DOI | F81604_SJA1000_IRQ_EI | 635 F81604_SJA1000_IRQ_BEI | F81604_SJA1000_IRQ_EPI | 636 F81604_SJA1000_IRQ_ALI)) 637 f81604_handle_can_bus_errors(priv, data); 638 639 /* handle TX */ 640 if (priv->can.state != CAN_STATE_BUS_OFF && 641 (data->isrc & F81604_SJA1000_IRQ_TI)) 642 f81604_handle_tx(priv, data); 643 644 resubmit_urb: 645 ret = usb_submit_urb(urb, GFP_ATOMIC); 646 if (ret == -ENODEV) 647 netif_device_detach(netdev); 648 else if (ret) 649 netdev_err(netdev, "%s: failed to resubmit int urb: %pe\n", 650 __func__, ERR_PTR(ret)); 651 } 652 653 static void f81604_unregister_urbs(struct f81604_port_priv *priv) 654 { 655 usb_kill_anchored_urbs(&priv->urbs_anchor); 656 } 657 658 static int f81604_register_urbs(struct f81604_port_priv *priv) 659 { 660 struct net_device *netdev = priv->netdev; 661 struct f81604_int_data *int_data; 662 int id = netdev->dev_port; 663 struct urb *int_urb; 664 int rx_urb_cnt; 665 int ret; 666 667 for (rx_urb_cnt = 0; rx_urb_cnt < F81604_MAX_RX_URBS; ++rx_urb_cnt) { 668 struct f81604_can_frame *frame; 669 struct urb *rx_urb; 670 671 rx_urb = usb_alloc_urb(0, GFP_KERNEL); 672 if (!rx_urb) { 673 ret = -ENOMEM; 674 break; 675 } 676 677 frame = kmalloc(sizeof(*frame), GFP_KERNEL); 678 if (!frame) { 679 usb_free_urb(rx_urb); 680 ret = -ENOMEM; 681 break; 682 } 683 684 usb_fill_bulk_urb(rx_urb, priv->dev, 685 usb_rcvbulkpipe(priv->dev, bulk_in_addr[id]), 686 frame, sizeof(*frame), 687 f81604_read_bulk_callback, netdev); 688 689 rx_urb->transfer_flags |= URB_FREE_BUFFER; 690 usb_anchor_urb(rx_urb, &priv->urbs_anchor); 691 692 ret = usb_submit_urb(rx_urb, GFP_KERNEL); 693 if (ret) { 694 usb_unanchor_urb(rx_urb); 695 usb_free_urb(rx_urb); 696 break; 697 } 698 699 /* Drop reference, USB core will take care of freeing it */ 700 usb_free_urb(rx_urb); 701 } 702 703 if (rx_urb_cnt == 0) { 704 netdev_warn(netdev, "%s: submit rx urb failed: %pe\n", 705 __func__, ERR_PTR(ret)); 706 707 goto error; 708 } 709 710 int_urb = usb_alloc_urb(0, GFP_KERNEL); 711 if (!int_urb) { 712 ret = -ENOMEM; 713 goto error; 714 } 715 716 int_data = kmalloc(sizeof(*int_data), GFP_KERNEL); 717 if (!int_data) { 718 usb_free_urb(int_urb); 719 ret = -ENOMEM; 720 goto error; 721 } 722 723 usb_fill_int_urb(int_urb, priv->dev, 724 usb_rcvintpipe(priv->dev, int_in_addr[id]), int_data, 725 sizeof(*int_data), f81604_read_int_callback, netdev, 726 1); 727 728 int_urb->transfer_flags |= URB_FREE_BUFFER; 729 usb_anchor_urb(int_urb, &priv->urbs_anchor); 730 731 ret = usb_submit_urb(int_urb, GFP_KERNEL); 732 if (ret) { 733 usb_unanchor_urb(int_urb); 734 usb_free_urb(int_urb); 735 736 netdev_warn(netdev, "%s: submit int urb failed: %pe\n", 737 __func__, ERR_PTR(ret)); 738 goto error; 739 } 740 741 /* Drop reference, USB core will take care of freeing it */ 742 usb_free_urb(int_urb); 743 744 return 0; 745 746 error: 747 f81604_unregister_urbs(priv); 748 return ret; 749 } 750 751 static int f81604_start(struct net_device *netdev) 752 { 753 struct f81604_port_priv *priv = netdev_priv(netdev); 754 int ret; 755 u8 mode; 756 u8 tmp; 757 758 mode = F81604_RX_AUTO_RELEASE_BUF | F81604_INT_WHEN_CHANGE; 759 760 /* Set TR/AT mode */ 761 if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) 762 mode |= F81604_TX_ONESHOT; 763 else 764 mode |= F81604_TX_NORMAL; 765 766 ret = f81604_sja1000_write(priv, F81604_CTRL_MODE_REG, mode); 767 if (ret) 768 return ret; 769 770 /* set reset mode */ 771 ret = f81604_set_reset_mode(priv); 772 if (ret) 773 return ret; 774 775 ret = f81604_chipset_init(priv); 776 if (ret) 777 return ret; 778 779 /* Clear error counters and error code capture */ 780 ret = f81604_sja1000_write(priv, F81604_SJA1000_TXERR, 0); 781 if (ret) 782 return ret; 783 784 ret = f81604_sja1000_write(priv, F81604_SJA1000_RXERR, 0); 785 if (ret) 786 return ret; 787 788 /* Read clear for ECC/ALC/IR register */ 789 ret = f81604_sja1000_read(priv, F81604_SJA1000_ECC, &tmp); 790 if (ret) 791 return ret; 792 793 ret = f81604_sja1000_read(priv, F81604_SJA1000_ALC, &tmp); 794 if (ret) 795 return ret; 796 797 ret = f81604_sja1000_read(priv, F81604_SJA1000_IR, &tmp); 798 if (ret) 799 return ret; 800 801 ret = f81604_register_urbs(priv); 802 if (ret) 803 return ret; 804 805 ret = f81604_set_normal_mode(priv); 806 if (ret) { 807 f81604_unregister_urbs(priv); 808 return ret; 809 } 810 811 return 0; 812 } 813 814 static int f81604_set_bittiming(struct net_device *dev) 815 { 816 struct f81604_port_priv *priv = netdev_priv(dev); 817 struct can_bittiming *bt = &priv->can.bittiming; 818 u8 btr0, btr1; 819 int ret; 820 821 btr0 = FIELD_PREP(F81604_BRP_MASK, bt->brp - 1) | 822 FIELD_PREP(F81604_SJW_MASK, bt->sjw - 1); 823 824 btr1 = FIELD_PREP(F81604_SEG1_MASK, 825 bt->prop_seg + bt->phase_seg1 - 1) | 826 FIELD_PREP(F81604_SEG2_MASK, bt->phase_seg2 - 1); 827 828 if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) 829 btr1 |= F81604_SJA1000_BTR1_SAMPLE_TRIPLE; 830 831 ret = f81604_sja1000_write(priv, F81604_SJA1000_BTR0, btr0); 832 if (ret) { 833 netdev_warn(dev, "%s: Set BTR0 failed: %pe\n", __func__, 834 ERR_PTR(ret)); 835 return ret; 836 } 837 838 ret = f81604_sja1000_write(priv, F81604_SJA1000_BTR1, btr1); 839 if (ret) { 840 netdev_warn(dev, "%s: Set BTR1 failed: %pe\n", __func__, 841 ERR_PTR(ret)); 842 return ret; 843 } 844 845 return 0; 846 } 847 848 static int f81604_set_mode(struct net_device *netdev, enum can_mode mode) 849 { 850 int ret; 851 852 switch (mode) { 853 case CAN_MODE_START: 854 ret = f81604_start(netdev); 855 if (!ret && netif_queue_stopped(netdev)) 856 netif_wake_queue(netdev); 857 break; 858 859 default: 860 ret = -EOPNOTSUPP; 861 } 862 863 return ret; 864 } 865 866 static void f81604_write_bulk_callback(struct urb *urb) 867 { 868 struct net_device *netdev = urb->context; 869 870 if (!netif_device_present(netdev)) 871 return; 872 873 if (urb->status) 874 netdev_info(netdev, "%s: Tx URB error: %pe\n", __func__, 875 ERR_PTR(urb->status)); 876 } 877 878 static void f81604_clear_reg_work(struct work_struct *work) 879 { 880 struct f81604_port_priv *priv; 881 u8 tmp; 882 883 priv = container_of(work, struct f81604_port_priv, clear_reg_work); 884 885 /* dummy read for clear Arbitration lost capture(ALC) register. */ 886 if (test_and_clear_bit(F81604_CLEAR_ALC, &priv->clear_flags)) 887 f81604_sja1000_read(priv, F81604_SJA1000_ALC, &tmp); 888 889 /* dummy read for clear Error code capture(ECC) register. */ 890 if (test_and_clear_bit(F81604_CLEAR_ECC, &priv->clear_flags)) 891 f81604_sja1000_read(priv, F81604_SJA1000_ECC, &tmp); 892 893 /* dummy write for clear data overrun flag. */ 894 if (test_and_clear_bit(F81604_CLEAR_OVERRUN, &priv->clear_flags)) 895 f81604_sja1000_write(priv, F81604_SJA1000_CMR, 896 F81604_SJA1000_CMD_CDO); 897 } 898 899 static netdev_tx_t f81604_start_xmit(struct sk_buff *skb, 900 struct net_device *netdev) 901 { 902 struct can_frame *cf = (struct can_frame *)skb->data; 903 struct f81604_port_priv *priv = netdev_priv(netdev); 904 struct net_device_stats *stats = &netdev->stats; 905 struct f81604_can_frame *frame; 906 struct urb *write_urb; 907 int ret; 908 909 if (can_dev_dropped_skb(netdev, skb)) 910 return NETDEV_TX_OK; 911 912 netif_stop_queue(netdev); 913 914 write_urb = usb_alloc_urb(0, GFP_ATOMIC); 915 if (!write_urb) 916 goto nomem_urb; 917 918 frame = kzalloc(sizeof(*frame), GFP_ATOMIC); 919 if (!frame) 920 goto nomem_buf; 921 922 usb_fill_bulk_urb(write_urb, priv->dev, 923 usb_sndbulkpipe(priv->dev, 924 bulk_out_addr[netdev->dev_port]), 925 frame, sizeof(*frame), f81604_write_bulk_callback, 926 priv->netdev); 927 928 write_urb->transfer_flags |= URB_FREE_BUFFER; 929 930 frame->cmd = F81604_CMD_DATA; 931 frame->dlc = cf->len; 932 933 if (cf->can_id & CAN_RTR_FLAG) 934 frame->dlc |= F81604_DLC_RTR_BIT; 935 936 if (cf->can_id & CAN_EFF_FLAG) { 937 u32 id = (cf->can_id & CAN_EFF_MASK) << F81604_EFF_SHIFT; 938 939 put_unaligned_be32(id, &frame->eff.id); 940 941 frame->dlc |= F81604_DLC_EFF_BIT; 942 943 if (!(cf->can_id & CAN_RTR_FLAG)) 944 memcpy(&frame->eff.data, cf->data, cf->len); 945 } else { 946 u32 id = (cf->can_id & CAN_SFF_MASK) << F81604_SFF_SHIFT; 947 948 put_unaligned_be16(id, &frame->sff.id); 949 950 if (!(cf->can_id & CAN_RTR_FLAG)) 951 memcpy(&frame->sff.data, cf->data, cf->len); 952 } 953 954 can_put_echo_skb(skb, netdev, 0, 0); 955 956 ret = usb_submit_urb(write_urb, GFP_ATOMIC); 957 if (ret) { 958 netdev_err(netdev, "%s: failed to resubmit tx bulk urb: %pe\n", 959 __func__, ERR_PTR(ret)); 960 961 can_free_echo_skb(netdev, 0, NULL); 962 stats->tx_dropped++; 963 stats->tx_errors++; 964 965 if (ret == -ENODEV) 966 netif_device_detach(netdev); 967 else 968 netif_wake_queue(netdev); 969 } 970 971 /* let usb core take care of this urb */ 972 usb_free_urb(write_urb); 973 974 return NETDEV_TX_OK; 975 976 nomem_buf: 977 usb_free_urb(write_urb); 978 979 nomem_urb: 980 dev_kfree_skb(skb); 981 stats->tx_dropped++; 982 stats->tx_errors++; 983 netif_wake_queue(netdev); 984 985 return NETDEV_TX_OK; 986 } 987 988 static int f81604_get_berr_counter(const struct net_device *netdev, 989 struct can_berr_counter *bec) 990 { 991 struct f81604_port_priv *priv = netdev_priv(netdev); 992 u8 txerr, rxerr; 993 int ret; 994 995 ret = f81604_sja1000_read(priv, F81604_SJA1000_TXERR, &txerr); 996 if (ret) 997 return ret; 998 999 ret = f81604_sja1000_read(priv, F81604_SJA1000_RXERR, &rxerr); 1000 if (ret) 1001 return ret; 1002 1003 bec->txerr = txerr; 1004 bec->rxerr = rxerr; 1005 1006 return 0; 1007 } 1008 1009 /* Open USB device */ 1010 static int f81604_open(struct net_device *netdev) 1011 { 1012 int ret; 1013 1014 ret = open_candev(netdev); 1015 if (ret) 1016 return ret; 1017 1018 ret = f81604_start(netdev); 1019 if (ret) { 1020 if (ret == -ENODEV) 1021 netif_device_detach(netdev); 1022 1023 close_candev(netdev); 1024 return ret; 1025 } 1026 1027 netif_start_queue(netdev); 1028 return 0; 1029 } 1030 1031 /* Close USB device */ 1032 static int f81604_close(struct net_device *netdev) 1033 { 1034 struct f81604_port_priv *priv = netdev_priv(netdev); 1035 1036 f81604_set_reset_mode(priv); 1037 1038 netif_stop_queue(netdev); 1039 cancel_work_sync(&priv->clear_reg_work); 1040 close_candev(netdev); 1041 1042 f81604_unregister_urbs(priv); 1043 1044 return 0; 1045 } 1046 1047 static const struct net_device_ops f81604_netdev_ops = { 1048 .ndo_open = f81604_open, 1049 .ndo_stop = f81604_close, 1050 .ndo_start_xmit = f81604_start_xmit, 1051 .ndo_change_mtu = can_change_mtu, 1052 }; 1053 1054 static const struct can_bittiming_const f81604_bittiming_const = { 1055 .name = KBUILD_MODNAME, 1056 .tseg1_min = 1, 1057 .tseg1_max = 16, 1058 .tseg2_min = 1, 1059 .tseg2_max = 8, 1060 .sjw_max = 4, 1061 .brp_min = 1, 1062 .brp_max = 64, 1063 .brp_inc = 1, 1064 }; 1065 1066 /* Called by the usb core when driver is unloaded or device is removed */ 1067 static void f81604_disconnect(struct usb_interface *intf) 1068 { 1069 struct f81604_priv *priv = usb_get_intfdata(intf); 1070 int i; 1071 1072 for (i = 0; i < ARRAY_SIZE(priv->netdev); ++i) { 1073 if (!priv->netdev[i]) 1074 continue; 1075 1076 unregister_netdev(priv->netdev[i]); 1077 free_candev(priv->netdev[i]); 1078 } 1079 } 1080 1081 static int __f81604_set_termination(struct usb_device *dev, int idx, u16 term) 1082 { 1083 u8 mask, data = 0; 1084 1085 if (idx == 0) 1086 mask = F81604_CAN0_TERM; 1087 else 1088 mask = F81604_CAN1_TERM; 1089 1090 if (term) 1091 data = mask; 1092 1093 return f81604_update_bits(dev, F81604_TERMINATOR_REG, mask, data); 1094 } 1095 1096 static int f81604_set_termination(struct net_device *netdev, u16 term) 1097 { 1098 struct f81604_port_priv *port_priv = netdev_priv(netdev); 1099 1100 ASSERT_RTNL(); 1101 1102 return __f81604_set_termination(port_priv->dev, netdev->dev_port, 1103 term); 1104 } 1105 1106 static int f81604_probe(struct usb_interface *intf, 1107 const struct usb_device_id *id) 1108 { 1109 struct usb_device *dev = interface_to_usbdev(intf); 1110 struct net_device *netdev; 1111 struct f81604_priv *priv; 1112 int i, ret; 1113 1114 priv = devm_kzalloc(&intf->dev, sizeof(*priv), GFP_KERNEL); 1115 if (!priv) 1116 return -ENOMEM; 1117 1118 usb_set_intfdata(intf, priv); 1119 1120 for (i = 0; i < ARRAY_SIZE(priv->netdev); ++i) { 1121 ret = __f81604_set_termination(dev, i, 0); 1122 if (ret) { 1123 dev_err(&intf->dev, 1124 "Setting termination of CH#%d failed: %pe\n", 1125 i, ERR_PTR(ret)); 1126 return ret; 1127 } 1128 } 1129 1130 for (i = 0; i < ARRAY_SIZE(priv->netdev); ++i) { 1131 struct f81604_port_priv *port_priv; 1132 1133 netdev = alloc_candev(sizeof(*port_priv), 1); 1134 if (!netdev) { 1135 dev_err(&intf->dev, "Couldn't alloc candev: %d\n", i); 1136 ret = -ENOMEM; 1137 1138 goto failure_cleanup; 1139 } 1140 1141 port_priv = netdev_priv(netdev); 1142 1143 INIT_WORK(&port_priv->clear_reg_work, f81604_clear_reg_work); 1144 init_usb_anchor(&port_priv->urbs_anchor); 1145 1146 port_priv->intf = intf; 1147 port_priv->dev = dev; 1148 port_priv->netdev = netdev; 1149 port_priv->can.clock.freq = F81604_CAN_CLOCK; 1150 1151 port_priv->can.termination_const = f81604_termination; 1152 port_priv->can.termination_const_cnt = 1153 ARRAY_SIZE(f81604_termination); 1154 port_priv->can.bittiming_const = &f81604_bittiming_const; 1155 port_priv->can.do_set_bittiming = f81604_set_bittiming; 1156 port_priv->can.do_set_mode = f81604_set_mode; 1157 port_priv->can.do_set_termination = f81604_set_termination; 1158 port_priv->can.do_get_berr_counter = f81604_get_berr_counter; 1159 port_priv->can.ctrlmode_supported = 1160 CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_3_SAMPLES | 1161 CAN_CTRLMODE_ONE_SHOT | CAN_CTRLMODE_BERR_REPORTING | 1162 CAN_CTRLMODE_PRESUME_ACK; 1163 1164 netdev->ethtool_ops = &f81604_ethtool_ops; 1165 netdev->netdev_ops = &f81604_netdev_ops; 1166 netdev->flags |= IFF_ECHO; 1167 netdev->dev_port = i; 1168 1169 SET_NETDEV_DEV(netdev, &intf->dev); 1170 1171 ret = register_candev(netdev); 1172 if (ret) { 1173 netdev_err(netdev, "register CAN device failed: %pe\n", 1174 ERR_PTR(ret)); 1175 free_candev(netdev); 1176 1177 goto failure_cleanup; 1178 } 1179 1180 priv->netdev[i] = netdev; 1181 } 1182 1183 return 0; 1184 1185 failure_cleanup: 1186 f81604_disconnect(intf); 1187 return ret; 1188 } 1189 1190 static struct usb_driver f81604_driver = { 1191 .name = KBUILD_MODNAME, 1192 .probe = f81604_probe, 1193 .disconnect = f81604_disconnect, 1194 .id_table = f81604_table, 1195 }; 1196 1197 module_usb_driver(f81604_driver); 1198 1199 MODULE_AUTHOR("Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>"); 1200 MODULE_DESCRIPTION("Fintek F81604 USB to 2xCANBUS"); 1201 MODULE_LICENSE("GPL"); 1202