Merge branch 'linus' into sched/urgent, to resolve conflict

Conflicts:
kernel/sched/ext.c

There's a context conflict between this upstream commit:

3fdb9ebcec10 sched_ext: Start schedulers with

Merge branch 'linus' into sched/urgent, to resolve conflict

Conflicts:
kernel/sched/ext.c

There's a context conflict between this upstream commit:

3fdb9ebcec10 sched_ext: Start schedulers with consistent p->scx.slice values

... and this fix in sched/urgent:

98442f0ccd82 sched: Fix delayed_dequeue vs switched_from_fair()

Resolve it.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> include

Merge tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.

It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.

Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"

[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]

* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h

show more ...

move asm/unaligned.h to linux/unaligned.h

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-

move asm/unaligned.h to linux/unaligned.h

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work fo

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.

Core:

- Rework the sendpage & splice implementations

Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES

Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is

Remove the MSG_SENDPAGE_NOTLAST flag completely

- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid

- Enable socket busy polling with CONFIG_RT

- Improve reliability and efficiency of reporting for ref_tracker

- Auto-generate a user space C library for various Netlink families

Protocols:

- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]

- Use per-VMA locking for "page-flipping" TCP receive zerocopy

- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags

- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative

- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)

- Avoid waking up applications using TLS sockets until we have a full
record

- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring

- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address

- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch

- PPPoE: make number of hash bits configurable

- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)

- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)

- Support matching on Connectivity Fault Management (CFM) packets

- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug

- HSR: don't enable promiscuous mode if device offloads the proto

- Support active scanning in IEEE 802.15.4

- Continue work on Multi-Link Operation for WiFi 7

BPF:

- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators

- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything

- Accept dynptr memory as memory arguments passed to helpers

- Add routing table ID to bpf_fib_lookup BPF helper

- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)

- Show target_{obj,btf}_id in tracing link fdinfo

- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

Netfilter:

- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value

- Increase ip_vs_conn_tab_bits range for 64BIT builds

- Allow updating size of a set

- Improve NAT tuple selection when connection is closing

Driver API:

- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)

- Support configuring rate selection pins of SFP modules

- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines

- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer

- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)

- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message

- Split devlink instance and devlink port operations

New hardware / drivers:

- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver

- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE

- CAN:
- Fintek F81604

Drivers:

- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10

- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)

- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of

- CAN: Kvaser PCIEcan:
- support packet timestamping

- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...

show more ...

Merge tag 'linux-can-next-for-6.5-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-05-15

The 1

Merge tag 'linux-can-next-for-6.5-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-05-15

The 1st patch is by Ji-Ze Hong and adds support for the Fintek F81604
USB-CAN adapter.

Jiapeng Chong's patch removes unnecessary dev_err() functions from the
bxcan driver.

The next patch is by me an makes a CAN internal header file self
contained.

The remaining 19 patches are by Uwe Kleine-König, they all convert the
platform driver remove callback to return void.

* tag 'linux-can-next-for-6.5-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
can: xilinx: Convert to platform remove callback returning void
can: ti_hecc: Convert to platform remove callback returning void
can: sun4i_can: Convert to platform remove callback returning void
can: softing: Convert to platform remove callback returning void
can: sja1000_platform: Convert to platform remove callback returning void
can: sja1000_isa: Convert to platform remove callback returning void
can: rcar: Convert to platform remove callback returning void
can: mscan: mpc5xxx_can: Convert to platform remove callback returning void
can: m_can: Convert to platform remove callback returning void
can: janz-ican3: Convert to platform remove callback returning void
can: ifi_canfd: Convert to platform remove callback returning void
can: grcan: Convert to platform remove callback returning void
can: flexcan: Convert to platform remove callback returning void
can: ctucanfd: Convert to platform remove callback returning void
can: length: make header self contained
can: cc770_platform: Convert to platform remove callback returning void
can: bxcan: Remove unnecessary print function dev_err()
can: cc770_isa: Convert to platform remove callback returning void
can: usb: f81604: add Fintek F81604 support
can: c_can: Convert to platform remove callback returning void
...
====================

Link: https://lore.kernel.org/r/20230515205759.1003118-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

can: usb: f81604: add Fintek F81604 support

This patch adds support for Fintek USB to 2CAN controller.

Changelog:
v7: https://lore.kernel.org/all/20230509073821.25289-1-peter_hong@fintek.com.tw
1

can: usb: f81604: add Fintek F81604 support

This patch adds support for Fintek USB to 2CAN controller.

Changelog:
v7: https://lore.kernel.org/all/20230509073821.25289-1-peter_hong@fintek.com.tw
1. Fix consistency of coding style for "break" in f81604_register_urbs().
2. Remove goto statement in f81604_open().

v6: https://lore.kernel.org/all/20230505022317.22417-1-peter_hong@fintek.com.tw
1. Remove non-used define and change constant mask to GENMASK().
2. Move some variables declaration from function start to block start.
3. Move some variables initization into declaration.
4. Change variable "id" in f81604_start_xmit() only for CAN ID usage.

v5: https://lore.kernel.org/all/20230420024403.13830-1-peter_hong@fintek.com.tw
1. Change all u8 *buff to struct f81604_int_data/f81604_can_frame.
2. Change all netdev->dev_id to netdev->dev_port.
3. Remove over design for f81604_process_rx_packet(). This device only
report a frame at once, so the f81604_process_rx_packet() are reduced
to process 1 frame.

v4: https://lore.kernel.org/all/20230413084253.1524-1-peter_hong@fintek.com.tw
1. Remove f81604_prepare_urbs/f81604_remove_urbs() and alloc URB/buffer
dynamically in f81604_register_urbs(), using "urbs_anchor" for manage
all rx/int URBs.
2. Add F81604 to MAINTAINERS list.
3. Change handle_clear_reg_work/handle_clear_overrun_work to single
clear_reg_work and using bitwise "clear_flags" to record it.
4. Move __f81604_set_termination in front of f81604_probe() to avoid
rarely racing condition.
5. Add __aligned to struct f81604_int_data / f81604_sff / f81604_eff.
6. Add aligned operations in f81604_start_xmit/f81604_process_rx_packet().
7. Change lots of CANBUS functions first parameter from struct usb_device*
to struct f81604_port_priv *priv. But remain f81604_write / f81604_read
/ f81604_update_bits() as struct usb_device* for
__f81604_set_termination() in probe() stage.
8. Simplify f81604_read_int_callback() and separate into
f81604_handle_tx / f81604_handle_can_bus_errors() functions.

v3: https://lore.kernel.org/all/20230327051048.11589-1-peter_hong@fintek.com.tw
1. Change CAN clock to using MEGA units.
2. Remove USB set/get retry, only remain SJA1000 reset/operation retry.
3. Fix all numberic constant to define.
4. Add terminator control. (only 0 & 120 ohm)
5. Using struct data to represent INT/TX/RX endpoints data instead byte
arrays.
6. Error message reports changed from %d to %pe for mnemotechnic values.
7. Some bit operations are changed to FIELD_PREP().
8. Separate TX functions from f81604_read_int_callback().
9. cf->can_id |= CAN_ERR_CNT in f81604_read_int_callback to report valid
TX/RX error counts.
10. Move f81604_prepare_urbs/f81604_remove_urbs() from CAN open/close() to
USB probe/disconnect().
11. coding style refactoring.

v2: https://lore.kernel.org/all/20230321081152.26510-1-peter_hong@fintek.com.tw
1. coding style refactoring.
2. some const number are defined to describe itself.
3. fix wrong usage for can_get_echo_skb() in f81604_write_bulk_callback().

v1: https://lore.kernel.org/all/20230317093352.3979-1-peter_hong@fintek.com.tw

Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230509073821.25289-1-peter_hong@fintek.com.tw
[mkl: add changelog, fix printf format]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...