1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig CAN_SJA1000 3 tristate "Philips/NXP SJA1000 devices" 4 depends on HAS_IOMEM 5 6if CAN_SJA1000 7 8config CAN_SJA1000_ISA 9 tristate "ISA Bus based legacy SJA1000 driver" 10 ---help--- 11 This driver adds legacy support for SJA1000 chips connected to 12 the ISA bus using I/O port, memory mapped or indirect access. 13 14config CAN_SJA1000_PLATFORM 15 tristate "Generic Platform Bus based SJA1000 driver" 16 ---help--- 17 This driver adds support for the SJA1000 chips connected to 18 the "platform bus" (Linux abstraction for directly to the 19 processor attached devices). Which can be found on various 20 boards from Phytec (http://www.phytec.de) like the PCM027, 21 PCM038. It also provides the OpenFirmware "platform bus" found 22 on embedded systems with OpenFirmware bindings, e.g. if you 23 have a PowerPC based system you may want to enable this option. 24 25config CAN_EMS_PCMCIA 26 tristate "EMS CPC-CARD Card" 27 depends on PCMCIA 28 ---help--- 29 This driver is for the one or two channel CPC-CARD cards from 30 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 31 32config CAN_EMS_PCI 33 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" 34 depends on PCI 35 ---help--- 36 This driver is for the one, two or four channel CPC-PCI, 37 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 38 (http://www.ems-wuensche.de). 39 40config CAN_PEAK_PCMCIA 41 tristate "PEAK PCAN-PC Card" 42 depends on PCMCIA 43 depends on HAS_IOPORT_MAP 44 ---help--- 45 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) 46 from PEAK-System (http://www.peak-system.com). To compile this 47 driver as a module, choose M here: the module will be called 48 peak_pcmcia. 49 50config CAN_PEAK_PCI 51 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" 52 depends on PCI 53 ---help--- 54 This driver is for the PCAN-PCI/PCIe/miniPCI cards 55 (1, 2, 3 or 4 channels) from PEAK-System Technik 56 (http://www.peak-system.com). 57 58config CAN_PEAK_PCIEC 59 bool "PEAK PCAN-ExpressCard Cards" 60 depends on CAN_PEAK_PCI 61 select I2C 62 select I2C_ALGOBIT 63 default y 64 ---help--- 65 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System 66 Technik. This will also automatically select I2C and I2C_ALGO 67 configuration options. 68 69config CAN_KVASER_PCI 70 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 71 depends on PCI 72 ---help--- 73 This driver is for the PCIcanx and PCIcan cards (1, 2 or 74 4 channel) from Kvaser (http://www.kvaser.com). 75 76config CAN_PLX_PCI 77 tristate "PLX90xx PCI-bridge based Cards" 78 depends on PCI 79 ---help--- 80 This driver is for CAN interface cards based on 81 the PLX90xx PCI bridge. 82 Driver supports now: 83 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) 84 - Adlink PCI-7841/cPCI-7841 SE card 85 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) 86 - esd CAN-PCI/PMC/266 87 - esd CAN-PCIe/2000 88 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) 89 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) 90 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) 91 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) 92 - ASEM CAN raw - 2 isolated CAN channels (www.asem.it) 93 94config CAN_TSCAN1 95 tristate "TS-CAN1 PC104 boards" 96 depends on ISA 97 help 98 This driver is for Technologic Systems' TSCAN-1 PC104 boards. 99 http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 100 The driver supports multiple boards and automatically configures them: 101 PLD IO base addresses are read from jumpers JP1 and JP2, 102 IRQ numbers are read from jumpers JP4 and JP5, 103 SJA1000 IO base addresses are chosen heuristically (first that works). 104 105endif 106