1 # SPDX-License-Identifier: GPL-2.0-only 2 3 menuconfig CAN_SJA1000 4 tristate "Philips/NXP SJA1000 devices" 5 depends on HAS_IOMEM 6 7 if CAN_SJA1000 8 9 config CAN_EMS_PCI 10 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" 11 depends on PCI 12 help 13 This driver is for the one, two or four channel CPC-PCI, 14 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 15 (http://www.ems-wuensche.de). 16 17 config CAN_EMS_PCMCIA 18 tristate "EMS CPC-CARD Card" 19 depends on PCMCIA 20 help 21 This driver is for the one or two channel CPC-CARD cards from 22 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 23 24 config CAN_F81601 25 tristate "Fintek F81601 PCIE to 2 CAN Controller" 26 depends on PCI 27 help 28 This driver adds support for Fintek F81601 PCIE to 2 CAN 29 Controller. It had internal 24MHz clock source, but it can 30 be changed by manufacturer. Use modinfo to get usage for 31 parameters. Visit http://www.fintek.com.tw to get more 32 information. 33 34 config CAN_KVASER_PCI 35 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 36 depends on PCI 37 help 38 This driver is for the PCIcanx and PCIcan cards (1, 2 or 39 4 channel) from Kvaser (http://www.kvaser.com). 40 41 config CAN_PEAK_PCI 42 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" 43 depends on PCI 44 help 45 This driver is for the PCAN-PCI/PCIe/miniPCI cards 46 (1, 2, 3 or 4 channels) from PEAK-System Technik 47 (http://www.peak-system.com). 48 49 config CAN_PEAK_PCIEC 50 bool "PEAK PCAN-ExpressCard Cards" 51 depends on CAN_PEAK_PCI 52 select I2C 53 select I2C_ALGOBIT 54 default y 55 help 56 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System 57 Technik. This will also automatically select I2C and I2C_ALGO 58 configuration options. 59 60 config CAN_PEAK_PCMCIA 61 tristate "PEAK PCAN-PC Card" 62 depends on PCMCIA 63 depends on HAS_IOPORT_MAP 64 help 65 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) 66 from PEAK-System (http://www.peak-system.com). To compile this 67 driver as a module, choose M here: the module will be called 68 peak_pcmcia. 69 70 config CAN_PLX_PCI 71 tristate "PLX90xx PCI-bridge based Cards" 72 depends on PCI 73 help 74 This driver is for CAN interface cards based on 75 the PLX90xx PCI bridge. 76 Driver supports now: 77 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) 78 - Adlink PCI-7841/cPCI-7841 SE card 79 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) 80 - esd CAN-PCI/PMC/266 81 - esd CAN-PCIe/2000 82 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) 83 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) 84 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) 85 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) 86 - ASEM CAN raw - 2 isolated CAN channels (www.asem.it) 87 88 config CAN_SJA1000_ISA 89 tristate "ISA Bus based legacy SJA1000 driver" 90 depends on HAS_IOPORT 91 help 92 This driver adds legacy support for SJA1000 chips connected to 93 the ISA bus using I/O port, memory mapped or indirect access. 94 95 config CAN_SJA1000_PLATFORM 96 tristate "Generic Platform Bus based SJA1000 driver" 97 help 98 This driver adds support for the SJA1000 chips connected to 99 the "platform bus" (Linux abstraction for directly to the 100 processor attached devices). Which can be found on various 101 boards from Phytec (http://www.phytec.de) like the PCM027, 102 PCM038. It also provides the OpenFirmware "platform bus" found 103 on embedded systems with OpenFirmware bindings, e.g. if you 104 have a PowerPC based system you may want to enable this option. 105 106 config CAN_TSCAN1 107 tristate "TS-CAN1 PC104 boards" 108 depends on ISA 109 help 110 This driver is for Technologic Systems' TSCAN-1 PC104 boards. 111 https://www.embeddedts.com/products/TS-CAN1 112 The driver supports multiple boards and automatically configures them: 113 PLD IO base addresses are read from jumpers JP1 and JP2, 114 IRQ numbers are read from jumpers JP4 and JP5, 115 SJA1000 IO base addresses are chosen heuristically (first that works). 116 117 endif 118