1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2017 Free Electrons
4 * Copyright (C) 2017 NextThing Co
5 *
6 * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
7 */
8
9 #include <linux/sizes.h>
10 #include <linux/slab.h>
11
12 #include "internals.h"
13
14 #define NAND_HYNIX_CMD_SET_PARAMS 0x36
15 #define NAND_HYNIX_CMD_APPLY_PARAMS 0x16
16
17 #define NAND_HYNIX_1XNM_RR_REPEAT 8
18
19 /**
20 * struct hynix_read_retry - read-retry data
21 * @nregs: number of register to set when applying a new read-retry mode
22 * @regs: register offsets (NAND chip dependent)
23 * @values: array of values to set in registers. The array size is equal to
24 * (nregs * nmodes)
25 */
26 struct hynix_read_retry {
27 int nregs;
28 const u8 *regs;
29 u8 values[];
30 };
31
32 /**
33 * struct hynix_nand - private Hynix NAND struct
34 * @read_retry: read-retry information
35 */
36 struct hynix_nand {
37 const struct hynix_read_retry *read_retry;
38 };
39
40 /**
41 * struct hynix_read_retry_otp - structure describing how the read-retry OTP
42 * area
43 * @nregs: number of hynix private registers to set before reading the reading
44 * the OTP area
45 * @regs: registers that should be configured
46 * @values: values that should be set in regs
47 * @page: the address to pass to the READ_PAGE command. Depends on the NAND
48 * chip
49 * @size: size of the read-retry OTP section
50 */
51 struct hynix_read_retry_otp {
52 int nregs;
53 const u8 *regs;
54 const u8 *values;
55 int page;
56 int size;
57 };
58
hynix_nand_has_valid_jedecid(struct nand_chip * chip)59 static bool hynix_nand_has_valid_jedecid(struct nand_chip *chip)
60 {
61 u8 jedecid[5] = { };
62 int ret;
63
64 ret = nand_readid_op(chip, 0x40, jedecid, sizeof(jedecid));
65 if (ret)
66 return false;
67
68 return !strncmp("JEDEC", jedecid, sizeof(jedecid));
69 }
70
hynix_nand_cmd_op(struct nand_chip * chip,u8 cmd)71 static int hynix_nand_cmd_op(struct nand_chip *chip, u8 cmd)
72 {
73 if (nand_has_exec_op(chip)) {
74 struct nand_op_instr instrs[] = {
75 NAND_OP_CMD(cmd, 0),
76 };
77 struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
78
79 return nand_exec_op(chip, &op);
80 }
81
82 chip->legacy.cmdfunc(chip, cmd, -1, -1);
83
84 return 0;
85 }
86
hynix_nand_reg_write_op(struct nand_chip * chip,u8 addr,u8 val)87 static int hynix_nand_reg_write_op(struct nand_chip *chip, u8 addr, u8 val)
88 {
89 u16 column = ((u16)addr << 8) | addr;
90
91 if (nand_has_exec_op(chip)) {
92 struct nand_op_instr instrs[] = {
93 NAND_OP_ADDR(1, &addr, 0),
94 NAND_OP_8BIT_DATA_OUT(1, &val, 0),
95 };
96 struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
97
98 return nand_exec_op(chip, &op);
99 }
100
101 chip->legacy.cmdfunc(chip, NAND_CMD_NONE, column, -1);
102 chip->legacy.write_byte(chip, val);
103
104 return 0;
105 }
106
hynix_nand_setup_read_retry(struct nand_chip * chip,int retry_mode)107 static int hynix_nand_setup_read_retry(struct nand_chip *chip, int retry_mode)
108 {
109 struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
110 const u8 *values;
111 int i, ret;
112
113 values = hynix->read_retry->values +
114 (retry_mode * hynix->read_retry->nregs);
115
116 /* Enter 'Set Hynix Parameters' mode */
117 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
118 if (ret)
119 return ret;
120
121 /*
122 * Configure the NAND in the requested read-retry mode.
123 * This is done by setting pre-defined values in internal NAND
124 * registers.
125 *
126 * The set of registers is NAND specific, and the values are either
127 * predefined or extracted from an OTP area on the NAND (values are
128 * probably tweaked at production in this case).
129 */
130 for (i = 0; i < hynix->read_retry->nregs; i++) {
131 ret = hynix_nand_reg_write_op(chip, hynix->read_retry->regs[i],
132 values[i]);
133 if (ret)
134 return ret;
135 }
136
137 /* Apply the new settings. */
138 return hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
139 }
140
141 /**
142 * hynix_get_majority - get the value that is occurring the most in a given
143 * set of values
144 * @in: the array of values to test
145 * @repeat: the size of the in array
146 * @out: pointer used to store the output value
147 *
148 * This function implements the 'majority check' logic that is supposed to
149 * overcome the unreliability of MLC NANDs when reading the OTP area storing
150 * the read-retry parameters.
151 *
152 * It's based on a pretty simple assumption: if we repeat the same value
153 * several times and then take the one that is occurring the most, we should
154 * find the correct value.
155 * Let's hope this dummy algorithm prevents us from losing the read-retry
156 * parameters.
157 */
hynix_get_majority(const u8 * in,int repeat,u8 * out)158 static int hynix_get_majority(const u8 *in, int repeat, u8 *out)
159 {
160 int i, j, half = repeat / 2;
161
162 /*
163 * We only test the first half of the in array because we must ensure
164 * that the value is at least occurring repeat / 2 times.
165 *
166 * This loop is suboptimal since we may count the occurrences of the
167 * same value several time, but we are doing that on small sets, which
168 * makes it acceptable.
169 */
170 for (i = 0; i < half; i++) {
171 int cnt = 0;
172 u8 val = in[i];
173
174 /* Count all values that are matching the one at index i. */
175 for (j = i + 1; j < repeat; j++) {
176 if (in[j] == val)
177 cnt++;
178 }
179
180 /* We found a value occurring more than repeat / 2. */
181 if (cnt > half) {
182 *out = val;
183 return 0;
184 }
185 }
186
187 return -EIO;
188 }
189
hynix_read_rr_otp(struct nand_chip * chip,const struct hynix_read_retry_otp * info,void * buf)190 static int hynix_read_rr_otp(struct nand_chip *chip,
191 const struct hynix_read_retry_otp *info,
192 void *buf)
193 {
194 int i, ret;
195
196 ret = nand_reset_op(chip);
197 if (ret)
198 return ret;
199
200 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
201 if (ret)
202 return ret;
203
204 for (i = 0; i < info->nregs; i++) {
205 ret = hynix_nand_reg_write_op(chip, info->regs[i],
206 info->values[i]);
207 if (ret)
208 return ret;
209 }
210
211 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
212 if (ret)
213 return ret;
214
215 /* Sequence to enter OTP mode? */
216 ret = hynix_nand_cmd_op(chip, 0x17);
217 if (ret)
218 return ret;
219
220 ret = hynix_nand_cmd_op(chip, 0x4);
221 if (ret)
222 return ret;
223
224 ret = hynix_nand_cmd_op(chip, 0x19);
225 if (ret)
226 return ret;
227
228 /* Now read the page */
229 ret = nand_read_page_op(chip, info->page, 0, buf, info->size);
230 if (ret)
231 return ret;
232
233 /* Put everything back to normal */
234 ret = nand_reset_op(chip);
235 if (ret)
236 return ret;
237
238 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
239 if (ret)
240 return ret;
241
242 ret = hynix_nand_reg_write_op(chip, 0x38, 0);
243 if (ret)
244 return ret;
245
246 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
247 if (ret)
248 return ret;
249
250 return nand_read_page_op(chip, 0, 0, NULL, 0);
251 }
252
253 #define NAND_HYNIX_1XNM_RR_COUNT_OFFS 0
254 #define NAND_HYNIX_1XNM_RR_REG_COUNT_OFFS 8
255 #define NAND_HYNIX_1XNM_RR_SET_OFFS(x, setsize, inv) \
256 (16 + ((((x) * 2) + ((inv) ? 1 : 0)) * (setsize)))
257
hynix_mlc_1xnm_rr_value(const u8 * buf,int nmodes,int nregs,int mode,int reg,bool inv,u8 * val)258 static int hynix_mlc_1xnm_rr_value(const u8 *buf, int nmodes, int nregs,
259 int mode, int reg, bool inv, u8 *val)
260 {
261 u8 tmp[NAND_HYNIX_1XNM_RR_REPEAT];
262 int val_offs = (mode * nregs) + reg;
263 int set_size = nmodes * nregs;
264 int i, ret;
265
266 for (i = 0; i < NAND_HYNIX_1XNM_RR_REPEAT; i++) {
267 int set_offs = NAND_HYNIX_1XNM_RR_SET_OFFS(i, set_size, inv);
268
269 tmp[i] = buf[val_offs + set_offs];
270 }
271
272 ret = hynix_get_majority(tmp, NAND_HYNIX_1XNM_RR_REPEAT, val);
273 if (ret)
274 return ret;
275
276 if (inv)
277 *val = ~*val;
278
279 return 0;
280 }
281
282 static u8 hynix_1xnm_mlc_read_retry_regs[] = {
283 0xcc, 0xbf, 0xaa, 0xab, 0xcd, 0xad, 0xae, 0xaf
284 };
285
hynix_mlc_1xnm_rr_init(struct nand_chip * chip,const struct hynix_read_retry_otp * info)286 static int hynix_mlc_1xnm_rr_init(struct nand_chip *chip,
287 const struct hynix_read_retry_otp *info)
288 {
289 struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
290 struct hynix_read_retry *rr = NULL;
291 int ret, i, j;
292 u8 nregs, nmodes;
293 u8 *buf;
294
295 buf = kmalloc(info->size, GFP_KERNEL);
296 if (!buf)
297 return -ENOMEM;
298
299 ret = hynix_read_rr_otp(chip, info, buf);
300 if (ret)
301 goto out;
302
303 ret = hynix_get_majority(buf, NAND_HYNIX_1XNM_RR_REPEAT,
304 &nmodes);
305 if (ret)
306 goto out;
307
308 ret = hynix_get_majority(buf + NAND_HYNIX_1XNM_RR_REPEAT,
309 NAND_HYNIX_1XNM_RR_REPEAT,
310 &nregs);
311 if (ret)
312 goto out;
313
314 rr = kzalloc(sizeof(*rr) + (nregs * nmodes), GFP_KERNEL);
315 if (!rr) {
316 ret = -ENOMEM;
317 goto out;
318 }
319
320 for (i = 0; i < nmodes; i++) {
321 for (j = 0; j < nregs; j++) {
322 u8 *val = rr->values + (i * nregs);
323
324 ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j,
325 false, val);
326 if (!ret)
327 continue;
328
329 ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j,
330 true, val);
331 if (ret)
332 goto out;
333 }
334 }
335
336 rr->nregs = nregs;
337 rr->regs = hynix_1xnm_mlc_read_retry_regs;
338 hynix->read_retry = rr;
339 chip->ops.setup_read_retry = hynix_nand_setup_read_retry;
340 chip->read_retries = nmodes;
341
342 out:
343 kfree(buf);
344
345 if (ret)
346 kfree(rr);
347
348 return ret;
349 }
350
351 static const u8 hynix_mlc_1xnm_rr_otp_regs[] = { 0x38 };
352 static const u8 hynix_mlc_1xnm_rr_otp_values[] = { 0x52 };
353
354 static const struct hynix_read_retry_otp hynix_mlc_1xnm_rr_otps[] = {
355 {
356 .nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs),
357 .regs = hynix_mlc_1xnm_rr_otp_regs,
358 .values = hynix_mlc_1xnm_rr_otp_values,
359 .page = 0x21f,
360 .size = 784
361 },
362 {
363 .nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs),
364 .regs = hynix_mlc_1xnm_rr_otp_regs,
365 .values = hynix_mlc_1xnm_rr_otp_values,
366 .page = 0x200,
367 .size = 528,
368 },
369 };
370
hynix_nand_rr_init(struct nand_chip * chip)371 static int hynix_nand_rr_init(struct nand_chip *chip)
372 {
373 int i, ret = 0;
374 bool valid_jedecid;
375
376 valid_jedecid = hynix_nand_has_valid_jedecid(chip);
377
378 /*
379 * We only support read-retry for 1xnm NANDs, and those NANDs all
380 * expose a valid JEDEC ID.
381 */
382 if (valid_jedecid) {
383 u8 nand_tech = chip->id.data[5] >> 4;
384
385 /* 1xnm technology */
386 if (nand_tech == 4) {
387 for (i = 0; i < ARRAY_SIZE(hynix_mlc_1xnm_rr_otps);
388 i++) {
389 /*
390 * FIXME: Hynix recommend to copy the
391 * read-retry OTP area into a normal page.
392 */
393 ret = hynix_mlc_1xnm_rr_init(chip,
394 hynix_mlc_1xnm_rr_otps);
395 if (!ret)
396 break;
397 }
398 }
399 }
400
401 if (ret)
402 pr_warn("failed to initialize read-retry infrastructure");
403
404 return ret;
405 }
406
hynix_nand_extract_oobsize(struct nand_chip * chip,bool valid_jedecid)407 static void hynix_nand_extract_oobsize(struct nand_chip *chip,
408 bool valid_jedecid)
409 {
410 struct mtd_info *mtd = nand_to_mtd(chip);
411 struct nand_memory_organization *memorg;
412 u8 oobsize;
413
414 memorg = nanddev_get_memorg(&chip->base);
415
416 oobsize = ((chip->id.data[3] >> 2) & 0x3) |
417 ((chip->id.data[3] >> 4) & 0x4);
418
419 if (valid_jedecid) {
420 switch (oobsize) {
421 case 0:
422 memorg->oobsize = 2048;
423 break;
424 case 1:
425 memorg->oobsize = 1664;
426 break;
427 case 2:
428 memorg->oobsize = 1024;
429 break;
430 case 3:
431 memorg->oobsize = 640;
432 break;
433 default:
434 /*
435 * We should never reach this case, but if that
436 * happens, this probably means Hynix decided to use
437 * a different extended ID format, and we should find
438 * a way to support it.
439 */
440 WARN(1, "Invalid OOB size");
441 break;
442 }
443 } else {
444 switch (oobsize) {
445 case 0:
446 memorg->oobsize = 128;
447 break;
448 case 1:
449 memorg->oobsize = 224;
450 break;
451 case 2:
452 memorg->oobsize = 448;
453 break;
454 case 3:
455 memorg->oobsize = 64;
456 break;
457 case 4:
458 memorg->oobsize = 32;
459 break;
460 case 5:
461 memorg->oobsize = 16;
462 break;
463 case 6:
464 memorg->oobsize = 640;
465 break;
466 default:
467 /*
468 * We should never reach this case, but if that
469 * happens, this probably means Hynix decided to use
470 * a different extended ID format, and we should find
471 * a way to support it.
472 */
473 WARN(1, "Invalid OOB size");
474 break;
475 }
476
477 /*
478 * The datasheet of H27UCG8T2BTR mentions that the "Redundant
479 * Area Size" is encoded "per 8KB" (page size). This chip uses
480 * a page size of 16KiB. The datasheet mentions an OOB size of
481 * 1.280 bytes, but the OOB size encoded in the ID bytes (using
482 * the existing logic above) is 640 bytes.
483 * Update the OOB size for this chip by taking the value
484 * determined above and scaling it to the actual page size (so
485 * the actual OOB size for this chip is: 640 * 16k / 8k).
486 */
487 if (chip->id.data[1] == 0xde)
488 memorg->oobsize *= memorg->pagesize / SZ_8K;
489 }
490
491 mtd->oobsize = memorg->oobsize;
492 }
493
hynix_nand_extract_ecc_requirements(struct nand_chip * chip,bool valid_jedecid)494 static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
495 bool valid_jedecid)
496 {
497 struct nand_device *base = &chip->base;
498 struct nand_ecc_props requirements = {};
499 u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;
500
501 if (valid_jedecid) {
502 /* Reference: H27UCG8T2E datasheet */
503 requirements.step_size = 1024;
504
505 switch (ecc_level) {
506 case 0:
507 requirements.step_size = 0;
508 requirements.strength = 0;
509 break;
510 case 1:
511 requirements.strength = 4;
512 break;
513 case 2:
514 requirements.strength = 24;
515 break;
516 case 3:
517 requirements.strength = 32;
518 break;
519 case 4:
520 requirements.strength = 40;
521 break;
522 case 5:
523 requirements.strength = 50;
524 break;
525 case 6:
526 requirements.strength = 60;
527 break;
528 default:
529 /*
530 * We should never reach this case, but if that
531 * happens, this probably means Hynix decided to use
532 * a different extended ID format, and we should find
533 * a way to support it.
534 */
535 WARN(1, "Invalid ECC requirements");
536 }
537 } else {
538 /*
539 * The ECC requirements field meaning depends on the
540 * NAND technology.
541 */
542 u8 nand_tech = chip->id.data[5] & 0x7;
543
544 if (nand_tech < 3) {
545 /* > 26nm, reference: H27UBG8T2A datasheet */
546 if (ecc_level < 5) {
547 requirements.step_size = 512;
548 requirements.strength = 1 << ecc_level;
549 } else if (ecc_level < 7) {
550 if (ecc_level == 5)
551 requirements.step_size = 2048;
552 else
553 requirements.step_size = 1024;
554 requirements.strength = 24;
555 } else {
556 /*
557 * We should never reach this case, but if that
558 * happens, this probably means Hynix decided
559 * to use a different extended ID format, and
560 * we should find a way to support it.
561 */
562 WARN(1, "Invalid ECC requirements");
563 }
564 } else {
565 /* <= 26nm, reference: H27UBG8T2B datasheet */
566 if (!ecc_level) {
567 requirements.step_size = 0;
568 requirements.strength = 0;
569 } else if (ecc_level < 5) {
570 requirements.step_size = 512;
571 requirements.strength = 1 << (ecc_level - 1);
572 } else {
573 requirements.step_size = 1024;
574 requirements.strength = 24 +
575 (8 * (ecc_level - 5));
576 }
577 }
578 }
579
580 nanddev_set_ecc_requirements(base, &requirements);
581 }
582
hynix_nand_extract_scrambling_requirements(struct nand_chip * chip,bool valid_jedecid)583 static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
584 bool valid_jedecid)
585 {
586 u8 nand_tech;
587
588 /* We need scrambling on all TLC NANDs*/
589 if (nanddev_bits_per_cell(&chip->base) > 2)
590 chip->options |= NAND_NEED_SCRAMBLING;
591
592 /* And on MLC NANDs with sub-3xnm process */
593 if (valid_jedecid) {
594 nand_tech = chip->id.data[5] >> 4;
595
596 /* < 3xnm */
597 if (nand_tech > 0)
598 chip->options |= NAND_NEED_SCRAMBLING;
599 } else {
600 nand_tech = chip->id.data[5] & 0x7;
601
602 /* < 32nm */
603 if (nand_tech > 2)
604 chip->options |= NAND_NEED_SCRAMBLING;
605 }
606 }
607
hynix_nand_decode_id(struct nand_chip * chip)608 static void hynix_nand_decode_id(struct nand_chip *chip)
609 {
610 struct mtd_info *mtd = nand_to_mtd(chip);
611 struct nand_memory_organization *memorg;
612 bool valid_jedecid;
613 u8 tmp;
614
615 memorg = nanddev_get_memorg(&chip->base);
616
617 /*
618 * Exclude all SLC NANDs from this advanced detection scheme.
619 * According to the ranges defined in several datasheets, it might
620 * appear that even SLC NANDs could fall in this extended ID scheme.
621 * If that the case rework the test to let SLC NANDs go through the
622 * detection process.
623 */
624 if (chip->id.len < 6 || nand_is_slc(chip)) {
625 nand_decode_ext_id(chip);
626 return;
627 }
628
629 /* Extract pagesize */
630 memorg->pagesize = 2048 << (chip->id.data[3] & 0x03);
631 mtd->writesize = memorg->pagesize;
632
633 tmp = (chip->id.data[3] >> 4) & 0x3;
634 /*
635 * When bit7 is set that means we start counting at 1MiB, otherwise
636 * we start counting at 128KiB and shift this value the content of
637 * ID[3][4:5].
638 * The only exception is when ID[3][4:5] == 3 and ID[3][7] == 0, in
639 * this case the erasesize is set to 768KiB.
640 */
641 if (chip->id.data[3] & 0x80) {
642 memorg->pages_per_eraseblock = (SZ_1M << tmp) /
643 memorg->pagesize;
644 mtd->erasesize = SZ_1M << tmp;
645 } else if (tmp == 3) {
646 memorg->pages_per_eraseblock = (SZ_512K + SZ_256K) /
647 memorg->pagesize;
648 mtd->erasesize = SZ_512K + SZ_256K;
649 } else {
650 memorg->pages_per_eraseblock = (SZ_128K << tmp) /
651 memorg->pagesize;
652 mtd->erasesize = SZ_128K << tmp;
653 }
654
655 /*
656 * Modern Toggle DDR NANDs have a valid JEDECID even though they are
657 * not exposing a valid JEDEC parameter table.
658 * These NANDs use a different NAND ID scheme.
659 */
660 valid_jedecid = hynix_nand_has_valid_jedecid(chip);
661
662 hynix_nand_extract_oobsize(chip, valid_jedecid);
663 hynix_nand_extract_ecc_requirements(chip, valid_jedecid);
664 hynix_nand_extract_scrambling_requirements(chip, valid_jedecid);
665 }
666
hynix_nand_cleanup(struct nand_chip * chip)667 static void hynix_nand_cleanup(struct nand_chip *chip)
668 {
669 struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
670
671 if (!hynix)
672 return;
673
674 kfree(hynix->read_retry);
675 kfree(hynix);
676 nand_set_manufacturer_data(chip, NULL);
677 }
678
679 static int
h27ucg8t2atrbc_choose_interface_config(struct nand_chip * chip,struct nand_interface_config * iface)680 h27ucg8t2atrbc_choose_interface_config(struct nand_chip *chip,
681 struct nand_interface_config *iface)
682 {
683 onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4);
684
685 return nand_choose_best_sdr_timings(chip, iface, NULL);
686 }
687
h27ucg8t2etrbc_init(struct nand_chip * chip)688 static int h27ucg8t2etrbc_init(struct nand_chip *chip)
689 {
690 struct mtd_info *mtd = nand_to_mtd(chip);
691
692 chip->options |= NAND_NEED_SCRAMBLING;
693 mtd_set_pairing_scheme(mtd, &dist3_pairing_scheme);
694
695 return 0;
696 }
697
hynix_nand_init(struct nand_chip * chip)698 static int hynix_nand_init(struct nand_chip *chip)
699 {
700 struct hynix_nand *hynix;
701 int ret;
702
703 if (!nand_is_slc(chip))
704 chip->options |= NAND_BBM_LASTPAGE;
705 else
706 chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
707
708 hynix = kzalloc(sizeof(*hynix), GFP_KERNEL);
709 if (!hynix)
710 return -ENOMEM;
711
712 nand_set_manufacturer_data(chip, hynix);
713
714 if (!strncmp("H27UCG8T2ATR-BC", chip->parameters.model,
715 sizeof("H27UCG8T2ATR-BC") - 1))
716 chip->ops.choose_interface_config =
717 h27ucg8t2atrbc_choose_interface_config;
718
719 if (!strncmp("H27UCG8T2ETR-BC", chip->parameters.model,
720 sizeof("H27UCG8T2ETR-BC") - 1))
721 h27ucg8t2etrbc_init(chip);
722
723 ret = hynix_nand_rr_init(chip);
724 if (ret)
725 hynix_nand_cleanup(chip);
726
727 return ret;
728 }
729
hynix_fixup_onfi_param_page(struct nand_chip * chip,struct nand_onfi_params * p)730 static void hynix_fixup_onfi_param_page(struct nand_chip *chip,
731 struct nand_onfi_params *p)
732 {
733 /*
734 * Certain chips might report a 0 on sdr_timing_mode field
735 * (bytes 129-130). This has been seen on H27U4G8F2GDA-BI.
736 * According to ONFI specification, bit 0 of this field "shall be 1".
737 * Forcibly set this bit.
738 */
739 p->sdr_timing_modes |= cpu_to_le16(BIT(0));
740 }
741
742 const struct nand_manufacturer_ops hynix_nand_manuf_ops = {
743 .detect = hynix_nand_decode_id,
744 .init = hynix_nand_init,
745 .cleanup = hynix_nand_cleanup,
746 .fixup_onfi_param_page = hynix_fixup_onfi_param_page,
747 };
748