1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * arizona-spi.c -- Arizona SPI bus interface
4 *
5 * Copyright 2012 Wolfson Microelectronics plc
6 *
7 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 */
9
10 #include <linux/acpi.h>
11 #include <linux/err.h>
12 #include <linux/gpio/consumer.h>
13 #include <linux/gpio/machine.h>
14 #include <linux/module.h>
15 #include <linux/pm_runtime.h>
16 #include <linux/regmap.h>
17 #include <linux/regulator/consumer.h>
18 #include <linux/slab.h>
19 #include <linux/spi/spi.h>
20 #include <linux/of.h>
21 #include <uapi/linux/input-event-codes.h>
22
23 #include <linux/mfd/arizona/core.h>
24
25 #include "arizona.h"
26
27 #ifdef CONFIG_ACPI
28 static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
29 static const struct acpi_gpio_params ldoena_gpios = { 2, 0, false };
30
31 static const struct acpi_gpio_mapping arizona_acpi_gpios[] = {
32 { "reset-gpios", &reset_gpios, 1, },
33 { "wlf,ldoena-gpios", &ldoena_gpios, 1 },
34 { }
35 };
36
37 /*
38 * The ACPI resources for the device only describe external GPIO-s. They do
39 * not provide mappings for the GPIO-s coming from the Arizona codec itself.
40 */
41 static const struct gpiod_lookup arizona_soc_gpios[] = {
42 { "arizona", 2, "wlf,spkvdd-ena", 0, GPIO_ACTIVE_HIGH },
43 { "arizona", 4, "wlf,micd-pol", 0, GPIO_ACTIVE_LOW },
44 };
45
arizona_spi_acpi_remove_lookup(void * lookup)46 static void arizona_spi_acpi_remove_lookup(void *lookup)
47 {
48 gpiod_remove_lookup_table(lookup);
49 }
50
51 /* For ACPI tables from boards which ship with Windows as factory OS */
arizona_spi_acpi_windows_probe(struct arizona * arizona)52 static int arizona_spi_acpi_windows_probe(struct arizona *arizona)
53 {
54 struct gpiod_lookup_table *lookup;
55 acpi_status status;
56 int ret;
57
58 /* Add mappings for the 2 ACPI declared GPIOs used for reset and ldo-ena */
59 devm_acpi_dev_add_driver_gpios(arizona->dev, arizona_acpi_gpios);
60
61 /* Add lookups for the SoCs own GPIOs used for micdet-polarity and spkVDD-enable */
62 lookup = devm_kzalloc(arizona->dev,
63 struct_size(lookup, table, ARRAY_SIZE(arizona_soc_gpios) + 1),
64 GFP_KERNEL);
65 if (!lookup)
66 return -ENOMEM;
67
68 lookup->dev_id = dev_name(arizona->dev);
69 memcpy(lookup->table, arizona_soc_gpios, sizeof(arizona_soc_gpios));
70
71 gpiod_add_lookup_table(lookup);
72 ret = devm_add_action_or_reset(arizona->dev, arizona_spi_acpi_remove_lookup, lookup);
73 if (ret)
74 return ret;
75
76 /* Enable 32KHz clock from SoC to codec for jack-detect */
77 status = acpi_evaluate_object(ACPI_HANDLE(arizona->dev), "CLKE", NULL, NULL);
78 if (ACPI_FAILURE(status))
79 dev_warn(arizona->dev, "Failed to enable 32KHz clk ACPI error %d\n", status);
80
81 return 0;
82 }
83
84 /* For ACPI tables from boards which ship with Android as factory OS */
arizona_spi_acpi_android_probe(struct arizona * arizona)85 static int arizona_spi_acpi_android_probe(struct arizona *arizona)
86 {
87 int ret;
88
89 /*
90 * Get the reset GPIO, treating -ENOENT as -EPROBE_DEFER to wait for
91 * the x86-android-tablets module to register the board specific GPIO
92 * lookup table.
93 */
94 arizona->pdata.reset = devm_gpiod_get(arizona->dev, "reset", GPIOD_OUT_LOW);
95 if (IS_ERR(arizona->pdata.reset)) {
96 ret = PTR_ERR(arizona->pdata.reset);
97 if (ret == -ENOENT) {
98 dev_info_once(arizona->dev,
99 "Deferring probe till GPIO lookup is registered\n");
100 ret = -EPROBE_DEFER;
101 }
102 return dev_err_probe(arizona->dev, ret, "getting reset GPIO\n");
103 }
104
105 return 0;
106 }
107
108 /*
109 * The AOSP 3.5 mm Headset: Accessory Specification gives the following values:
110 * Function A Play/Pause: 0 ohm
111 * Function D Voice assistant: 135 ohm
112 * Function B Volume Up 240 ohm
113 * Function C Volume Down 470 ohm
114 * Minimum Mic DC resistance 1000 ohm
115 * Minimum Ear speaker impedance 16 ohm
116 * Note the first max value below must be less then the min. speaker impedance,
117 * to allow CTIA/OMTP detection to work. The other max values are the closest
118 * value from extcon-arizona.c:arizona_micd_levels halfway 2 button resistances.
119 */
120 static const struct arizona_micd_range arizona_micd_aosp_ranges[] = {
121 { .max = 11, .key = KEY_PLAYPAUSE },
122 { .max = 186, .key = KEY_VOICECOMMAND },
123 { .max = 348, .key = KEY_VOLUMEUP },
124 { .max = 752, .key = KEY_VOLUMEDOWN },
125 };
126
arizona_spi_acpi_probe(struct arizona * arizona)127 static int arizona_spi_acpi_probe(struct arizona *arizona)
128 {
129 struct acpi_device *adev = ACPI_COMPANION(arizona->dev);
130 int ret;
131
132 if (acpi_dev_hid_uid_match(adev, "10WM5102", NULL))
133 ret = arizona_spi_acpi_android_probe(arizona);
134 else
135 ret = arizona_spi_acpi_windows_probe(arizona);
136
137 if (ret)
138 return ret;
139
140 /*
141 * Some DSDTs wrongly declare the IRQ trigger-type as IRQF_TRIGGER_FALLING
142 * The IRQ line will stay low when a new IRQ event happens between reading
143 * the IRQ status flags and acknowledging them. When the IRQ line stays
144 * low like this the IRQ will never trigger again when its type is set
145 * to IRQF_TRIGGER_FALLING. Correct the IRQ trigger-type to fix this.
146 *
147 * Note theoretically it is possible that some boards are not capable
148 * of handling active low level interrupts. In that case setting the
149 * flag to IRQF_TRIGGER_FALLING would not be a bug (and we would need
150 * to work around this) but so far all known usages of IRQF_TRIGGER_FALLING
151 * are a bug in the board's DSDT.
152 */
153 arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;
154
155 /* Wait 200 ms after jack insertion */
156 arizona->pdata.micd_detect_debounce = 200;
157
158 /* Use standard AOSP values for headset-button mappings */
159 arizona->pdata.micd_ranges = arizona_micd_aosp_ranges;
160 arizona->pdata.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges);
161
162 /* Use left headphone speaker for HP vs line-out detection */
163 arizona->pdata.hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
164
165 return 0;
166 }
167
168 static const struct acpi_device_id arizona_acpi_match[] = {
169 {
170 .id = "WM510204",
171 .driver_data = WM5102,
172 },
173 {
174 .id = "WM510205",
175 .driver_data = WM5102,
176 },
177 {
178 .id = "10WM5102",
179 .driver_data = WM5102,
180 },
181 { }
182 };
183 MODULE_DEVICE_TABLE(acpi, arizona_acpi_match);
184 #else
arizona_spi_acpi_probe(struct arizona * arizona)185 static int arizona_spi_acpi_probe(struct arizona *arizona)
186 {
187 return -ENODEV;
188 }
189 #endif
190
arizona_spi_probe(struct spi_device * spi)191 static int arizona_spi_probe(struct spi_device *spi)
192 {
193 struct arizona *arizona;
194 const struct regmap_config *regmap_config = NULL;
195 unsigned long type = 0;
196 int ret;
197
198 type = (unsigned long)spi_get_device_match_data(spi);
199 switch (type) {
200 case WM5102:
201 if (IS_ENABLED(CONFIG_MFD_WM5102))
202 regmap_config = &wm5102_spi_regmap;
203 break;
204 case WM5110:
205 case WM8280:
206 if (IS_ENABLED(CONFIG_MFD_WM5110))
207 regmap_config = &wm5110_spi_regmap;
208 break;
209 case WM1831:
210 case CS47L24:
211 if (IS_ENABLED(CONFIG_MFD_CS47L24))
212 regmap_config = &cs47l24_spi_regmap;
213 break;
214 default:
215 dev_err(&spi->dev, "Unknown device type %ld\n", type);
216 return -EINVAL;
217 }
218
219 if (!regmap_config) {
220 dev_err(&spi->dev,
221 "No kernel support for device type %ld\n", type);
222 return -EINVAL;
223 }
224
225 arizona = devm_kzalloc(&spi->dev, sizeof(*arizona), GFP_KERNEL);
226 if (arizona == NULL)
227 return -ENOMEM;
228
229 arizona->regmap = devm_regmap_init_spi(spi, regmap_config);
230 if (IS_ERR(arizona->regmap)) {
231 ret = PTR_ERR(arizona->regmap);
232 dev_err(&spi->dev, "Failed to allocate register map: %d\n",
233 ret);
234 return ret;
235 }
236
237 arizona->type = type;
238 arizona->dev = &spi->dev;
239 arizona->irq = spi->irq;
240
241 if (has_acpi_companion(&spi->dev)) {
242 ret = arizona_spi_acpi_probe(arizona);
243 if (ret)
244 return ret;
245 }
246
247 return arizona_dev_init(arizona);
248 }
249
arizona_spi_remove(struct spi_device * spi)250 static void arizona_spi_remove(struct spi_device *spi)
251 {
252 struct arizona *arizona = spi_get_drvdata(spi);
253
254 arizona_dev_exit(arizona);
255 }
256
257 static const struct spi_device_id arizona_spi_ids[] = {
258 { "wm5102", WM5102 },
259 { "wm5110", WM5110 },
260 { "wm8280", WM8280 },
261 { "wm1831", WM1831 },
262 { "cs47l24", CS47L24 },
263 { },
264 };
265 MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
266
267 #ifdef CONFIG_OF
268 static const struct of_device_id arizona_spi_of_match[] = {
269 { .compatible = "wlf,wm5102", .data = (void *)WM5102 },
270 { .compatible = "wlf,wm5110", .data = (void *)WM5110 },
271 { .compatible = "wlf,wm8280", .data = (void *)WM8280 },
272 { .compatible = "wlf,wm1831", .data = (void *)WM1831 },
273 { .compatible = "cirrus,cs47l24", .data = (void *)CS47L24 },
274 {},
275 };
276 MODULE_DEVICE_TABLE(of, arizona_spi_of_match);
277 #endif
278
279 static struct spi_driver arizona_spi_driver = {
280 .driver = {
281 .name = "arizona",
282 .pm = pm_ptr(&arizona_pm_ops),
283 .of_match_table = of_match_ptr(arizona_spi_of_match),
284 .acpi_match_table = ACPI_PTR(arizona_acpi_match),
285 },
286 .probe = arizona_spi_probe,
287 .remove = arizona_spi_remove,
288 .id_table = arizona_spi_ids,
289 };
290
291 module_spi_driver(arizona_spi_driver);
292
293 MODULE_SOFTDEP("pre: arizona_ldo1");
294 MODULE_DESCRIPTION("Arizona SPI bus interface");
295 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
296 MODULE_LICENSE("GPL");
297