1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * 4 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] 5 * 6 * Extended 3 / 2005 by Hartmut Hackmann to support various 7 * cards with the tda10046 DVB-T channel decoder 8 */ 9 10 #include "saa7134.h" 11 #include "saa7134-reg.h" 12 13 #include <linux/init.h> 14 #include <linux/list.h> 15 #include <linux/module.h> 16 #include <linux/kernel.h> 17 #include <linux/delay.h> 18 #include <linux/kthread.h> 19 #include <linux/suspend.h> 20 21 #include <media/v4l2-common.h> 22 #include "dvb-pll.h" 23 #include <media/dvb_frontend.h> 24 25 #include "mt352.h" 26 #include "mt352_priv.h" /* FIXME */ 27 #include "tda1004x.h" 28 #include "nxt200x.h" 29 #include "xc2028.h" 30 #include "xc5000.h" 31 32 #include "tda10086.h" 33 #include "tda826x.h" 34 #include "tda827x.h" 35 #include "isl6421.h" 36 #include "isl6405.h" 37 #include "lnbp21.h" 38 #include "tuner-simple.h" 39 #include "tda10048.h" 40 #include "tda18271.h" 41 #include "lgdt3305.h" 42 #include "tda8290.h" 43 #include "mb86a20s.h" 44 #include "lgs8gxx.h" 45 46 #include "zl10353.h" 47 #include "qt1010.h" 48 49 #include "zl10036.h" 50 #include "zl10039.h" 51 #include "mt312.h" 52 #include "s5h1411.h" 53 54 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); 55 MODULE_LICENSE("GPL"); 56 57 static unsigned int antenna_pwr; 58 59 module_param(antenna_pwr, int, 0444); 60 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); 61 62 static int use_frontend; 63 module_param(use_frontend, int, 0644); 64 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); 65 66 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 67 68 /* ------------------------------------------------------------------ 69 * mt352 based DVB-T cards 70 */ 71 72 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) 73 { 74 u32 ok; 75 76 if (!on) { 77 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); 78 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 79 return 0; 80 } 81 82 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); 83 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 84 udelay(10); 85 86 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28)); 87 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); 88 udelay(10); 89 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); 90 udelay(10); 91 ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); 92 pr_debug("%s %s\n", __func__, ok ? "on" : "off"); 93 94 if (!ok) 95 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 96 return ok; 97 } 98 99 static int mt352_pinnacle_init(struct dvb_frontend* fe) 100 { 101 static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 }; 102 static u8 reset [] = { RESET, 0x80 }; 103 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 104 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; 105 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 }; 106 static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 }; 107 static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f }; 108 static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d }; 109 static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; 110 111 pr_debug("%s called\n", __func__); 112 113 mt352_write(fe, clock_config, sizeof(clock_config)); 114 udelay(200); 115 mt352_write(fe, reset, sizeof(reset)); 116 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 117 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 118 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 119 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); 120 121 mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); 122 mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); 123 mt352_write(fe, irq_cfg, sizeof(irq_cfg)); 124 125 return 0; 126 } 127 128 static int mt352_aver777_init(struct dvb_frontend* fe) 129 { 130 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; 131 static u8 reset [] = { RESET, 0x80 }; 132 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 133 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; 134 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; 135 136 mt352_write(fe, clock_config, sizeof(clock_config)); 137 udelay(200); 138 mt352_write(fe, reset, sizeof(reset)); 139 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 140 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 141 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 142 143 return 0; 144 } 145 146 static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) 147 { 148 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; 149 static u8 reset [] = { RESET, 0x80 }; 150 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 151 static u8 agc_cfg [] = { AGC_TARGET, 0xe }; 152 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; 153 154 mt352_write(fe, clock_config, sizeof(clock_config)); 155 udelay(200); 156 mt352_write(fe, reset, sizeof(reset)); 157 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 158 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 159 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 160 return 0; 161 } 162 163 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe) 164 { 165 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 166 u8 off[] = { 0x00, 0xf1}; 167 u8 on[] = { 0x00, 0x71}; 168 struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; 169 170 struct saa7134_dev *dev = fe->dvb->priv; 171 struct v4l2_frequency f; 172 173 /* set frequency (mt2050) */ 174 f.tuner = 0; 175 f.type = V4L2_TUNER_DIGITAL_TV; 176 f.frequency = c->frequency / 1000 * 16 / 1000; 177 if (fe->ops.i2c_gate_ctrl) 178 fe->ops.i2c_gate_ctrl(fe, 1); 179 i2c_transfer(&dev->i2c_adap, &msg, 1); 180 saa_call_all(dev, tuner, s_frequency, &f); 181 msg.buf = on; 182 if (fe->ops.i2c_gate_ctrl) 183 fe->ops.i2c_gate_ctrl(fe, 1); 184 i2c_transfer(&dev->i2c_adap, &msg, 1); 185 186 pinnacle_antenna_pwr(dev, antenna_pwr); 187 188 /* mt352 setup */ 189 return mt352_pinnacle_init(fe); 190 } 191 192 static struct mt352_config pinnacle_300i = { 193 .demod_address = 0x3c >> 1, 194 .adc_clock = 20333, 195 .if2 = 36150, 196 .no_tuner = 1, 197 .demod_init = mt352_pinnacle_init, 198 }; 199 200 static struct mt352_config avermedia_777 = { 201 .demod_address = 0xf, 202 .demod_init = mt352_aver777_init, 203 }; 204 205 static struct mt352_config avermedia_xc3028_mt352_dev = { 206 .demod_address = (0x1e >> 1), 207 .no_tuner = 1, 208 .demod_init = mt352_avermedia_xc3028_init, 209 }; 210 211 static struct tda18271_std_map mb86a20s_tda18271_std_map = { 212 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, 213 .if_lvl = 7, .rfagc_top = 0x37, }, 214 }; 215 216 static struct tda18271_config kworld_tda18271_config = { 217 .std_map = &mb86a20s_tda18271_std_map, 218 .gate = TDA18271_GATE_DIGITAL, 219 .config = 3, /* Use tuner callback for AGC */ 220 221 }; 222 223 static const struct mb86a20s_config kworld_mb86a20s_config = { 224 .demod_address = 0x10, 225 }; 226 227 static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable) 228 { 229 struct saa7134_dev *dev = fe->dvb->priv; 230 231 unsigned char initmsg[] = {0x45, 0x97}; 232 unsigned char msg_enable[] = {0x45, 0xc1}; 233 unsigned char msg_disable[] = {0x45, 0x81}; 234 struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; 235 236 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { 237 pr_warn("could not access the I2C gate\n"); 238 return -EIO; 239 } 240 if (enable) 241 msg.buf = msg_enable; 242 else 243 msg.buf = msg_disable; 244 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { 245 pr_warn("could not access the I2C gate\n"); 246 return -EIO; 247 } 248 msleep(20); 249 return 0; 250 } 251 252 /* ================================================================== 253 * tda1004x based DVB-T cards, helper functions 254 */ 255 256 static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, 257 const struct firmware **fw, char *name) 258 { 259 struct saa7134_dev *dev = fe->dvb->priv; 260 return request_firmware(fw, name, &dev->pci->dev); 261 } 262 263 /* ------------------------------------------------------------------ 264 * these tuners are tu1216, td1316(a) 265 */ 266 267 static int philips_tda6651_pll_set(struct dvb_frontend *fe) 268 { 269 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 270 struct saa7134_dev *dev = fe->dvb->priv; 271 struct tda1004x_state *state = fe->demodulator_priv; 272 u8 addr = state->config->tuner_address; 273 u8 tuner_buf[4]; 274 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = 275 sizeof(tuner_buf) }; 276 int tuner_frequency = 0; 277 u8 band, cp, filter; 278 279 /* determine charge pump */ 280 tuner_frequency = c->frequency + 36166000; 281 if (tuner_frequency < 87000000) 282 return -EINVAL; 283 else if (tuner_frequency < 130000000) 284 cp = 3; 285 else if (tuner_frequency < 160000000) 286 cp = 5; 287 else if (tuner_frequency < 200000000) 288 cp = 6; 289 else if (tuner_frequency < 290000000) 290 cp = 3; 291 else if (tuner_frequency < 420000000) 292 cp = 5; 293 else if (tuner_frequency < 480000000) 294 cp = 6; 295 else if (tuner_frequency < 620000000) 296 cp = 3; 297 else if (tuner_frequency < 830000000) 298 cp = 5; 299 else if (tuner_frequency < 895000000) 300 cp = 7; 301 else 302 return -EINVAL; 303 304 /* determine band */ 305 if (c->frequency < 49000000) 306 return -EINVAL; 307 else if (c->frequency < 161000000) 308 band = 1; 309 else if (c->frequency < 444000000) 310 band = 2; 311 else if (c->frequency < 861000000) 312 band = 4; 313 else 314 return -EINVAL; 315 316 /* setup PLL filter */ 317 switch (c->bandwidth_hz) { 318 case 6000000: 319 filter = 0; 320 break; 321 322 case 7000000: 323 filter = 0; 324 break; 325 326 case 8000000: 327 filter = 1; 328 break; 329 330 default: 331 return -EINVAL; 332 } 333 334 /* calculate divisor 335 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) 336 */ 337 tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; 338 339 /* setup tuner buffer */ 340 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; 341 tuner_buf[1] = tuner_frequency & 0xff; 342 tuner_buf[2] = 0xca; 343 tuner_buf[3] = (cp << 5) | (filter << 3) | band; 344 345 if (fe->ops.i2c_gate_ctrl) 346 fe->ops.i2c_gate_ctrl(fe, 1); 347 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { 348 pr_warn("could not write to tuner at addr: 0x%02x\n", 349 addr << 1); 350 return -EIO; 351 } 352 msleep(1); 353 return 0; 354 } 355 356 static int philips_tu1216_init(struct dvb_frontend *fe) 357 { 358 struct saa7134_dev *dev = fe->dvb->priv; 359 struct tda1004x_state *state = fe->demodulator_priv; 360 u8 addr = state->config->tuner_address; 361 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; 362 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; 363 364 /* setup PLL configuration */ 365 if (fe->ops.i2c_gate_ctrl) 366 fe->ops.i2c_gate_ctrl(fe, 1); 367 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) 368 return -EIO; 369 msleep(1); 370 371 return 0; 372 } 373 374 /* ------------------------------------------------------------------ */ 375 376 static struct tda1004x_config philips_tu1216_60_config = { 377 .demod_address = 0x8, 378 .invert = 1, 379 .invert_oclk = 0, 380 .xtal_freq = TDA10046_XTAL_4M, 381 .agc_config = TDA10046_AGC_DEFAULT, 382 .if_freq = TDA10046_FREQ_3617, 383 .tuner_address = 0x60, 384 .request_firmware = philips_tda1004x_request_firmware 385 }; 386 387 static struct tda1004x_config philips_tu1216_61_config = { 388 389 .demod_address = 0x8, 390 .invert = 1, 391 .invert_oclk = 0, 392 .xtal_freq = TDA10046_XTAL_4M, 393 .agc_config = TDA10046_AGC_DEFAULT, 394 .if_freq = TDA10046_FREQ_3617, 395 .tuner_address = 0x61, 396 .request_firmware = philips_tda1004x_request_firmware 397 }; 398 399 /* ------------------------------------------------------------------ */ 400 401 static int philips_td1316_tuner_init(struct dvb_frontend *fe) 402 { 403 struct saa7134_dev *dev = fe->dvb->priv; 404 struct tda1004x_state *state = fe->demodulator_priv; 405 u8 addr = state->config->tuner_address; 406 static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; 407 struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; 408 409 /* setup PLL configuration */ 410 if (fe->ops.i2c_gate_ctrl) 411 fe->ops.i2c_gate_ctrl(fe, 1); 412 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) 413 return -EIO; 414 return 0; 415 } 416 417 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe) 418 { 419 return philips_tda6651_pll_set(fe); 420 } 421 422 static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) 423 { 424 struct saa7134_dev *dev = fe->dvb->priv; 425 struct tda1004x_state *state = fe->demodulator_priv; 426 u8 addr = state->config->tuner_address; 427 static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; 428 struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; 429 430 /* switch the tuner to analog mode */ 431 if (fe->ops.i2c_gate_ctrl) 432 fe->ops.i2c_gate_ctrl(fe, 1); 433 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) 434 return -EIO; 435 return 0; 436 } 437 438 /* ------------------------------------------------------------------ */ 439 440 static int philips_europa_tuner_init(struct dvb_frontend *fe) 441 { 442 struct saa7134_dev *dev = fe->dvb->priv; 443 static u8 msg[] = { 0x00, 0x40}; 444 struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; 445 446 447 if (philips_td1316_tuner_init(fe)) 448 return -EIO; 449 msleep(1); 450 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) 451 return -EIO; 452 453 return 0; 454 } 455 456 static int philips_europa_tuner_sleep(struct dvb_frontend *fe) 457 { 458 struct saa7134_dev *dev = fe->dvb->priv; 459 460 static u8 msg[] = { 0x00, 0x14 }; 461 struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; 462 463 if (philips_td1316_tuner_sleep(fe)) 464 return -EIO; 465 466 /* switch the board to analog mode */ 467 if (fe->ops.i2c_gate_ctrl) 468 fe->ops.i2c_gate_ctrl(fe, 1); 469 i2c_transfer(&dev->i2c_adap, &analog_msg, 1); 470 return 0; 471 } 472 473 static int philips_europa_demod_sleep(struct dvb_frontend *fe) 474 { 475 struct saa7134_dev *dev = fe->dvb->priv; 476 477 if (dev->original_demod_sleep) 478 dev->original_demod_sleep(fe); 479 fe->ops.i2c_gate_ctrl(fe, 1); 480 return 0; 481 } 482 483 static struct tda1004x_config philips_europa_config = { 484 485 .demod_address = 0x8, 486 .invert = 0, 487 .invert_oclk = 0, 488 .xtal_freq = TDA10046_XTAL_4M, 489 .agc_config = TDA10046_AGC_IFO_AUTO_POS, 490 .if_freq = TDA10046_FREQ_052, 491 .tuner_address = 0x61, 492 .request_firmware = philips_tda1004x_request_firmware 493 }; 494 495 static struct tda1004x_config medion_cardbus = { 496 .demod_address = 0x08, 497 .invert = 1, 498 .invert_oclk = 0, 499 .xtal_freq = TDA10046_XTAL_16M, 500 .agc_config = TDA10046_AGC_IFO_AUTO_NEG, 501 .if_freq = TDA10046_FREQ_3613, 502 .tuner_address = 0x61, 503 .request_firmware = philips_tda1004x_request_firmware 504 }; 505 506 static struct tda1004x_config technotrend_budget_t3000_config = { 507 .demod_address = 0x8, 508 .invert = 1, 509 .invert_oclk = 0, 510 .xtal_freq = TDA10046_XTAL_4M, 511 .agc_config = TDA10046_AGC_DEFAULT, 512 .if_freq = TDA10046_FREQ_3617, 513 .tuner_address = 0x63, 514 .request_firmware = philips_tda1004x_request_firmware 515 }; 516 517 /* ------------------------------------------------------------------ 518 * tda 1004x based cards with philips silicon tuner 519 */ 520 521 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) 522 { 523 struct tda1004x_state *state = fe->demodulator_priv; 524 525 u8 addr = state->config->i2c_gate; 526 static u8 tda8290_close[] = { 0x21, 0xc0}; 527 static u8 tda8290_open[] = { 0x21, 0x80}; 528 struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; 529 if (enable) { 530 tda8290_msg.buf = tda8290_close; 531 } else { 532 tda8290_msg.buf = tda8290_open; 533 } 534 if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { 535 pr_warn("could not access tda8290 I2C gate\n"); 536 return -EIO; 537 } 538 msleep(20); 539 return 0; 540 } 541 542 static int philips_tda827x_tuner_init(struct dvb_frontend *fe) 543 { 544 struct saa7134_dev *dev = fe->dvb->priv; 545 struct tda1004x_state *state = fe->demodulator_priv; 546 547 switch (state->config->antenna_switch) { 548 case 0: 549 break; 550 case 1: 551 pr_debug("setting GPIO21 to 0 (TV antenna?)\n"); 552 saa7134_set_gpio(dev, 21, 0); 553 break; 554 case 2: 555 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n"); 556 saa7134_set_gpio(dev, 21, 1); 557 break; 558 } 559 return 0; 560 } 561 562 static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) 563 { 564 struct saa7134_dev *dev = fe->dvb->priv; 565 struct tda1004x_state *state = fe->demodulator_priv; 566 567 switch (state->config->antenna_switch) { 568 case 0: 569 break; 570 case 1: 571 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n"); 572 saa7134_set_gpio(dev, 21, 1); 573 break; 574 case 2: 575 pr_debug("setting GPIO21 to 0 (TV antenna?)\n"); 576 saa7134_set_gpio(dev, 21, 0); 577 break; 578 } 579 return 0; 580 } 581 582 static int configure_tda827x_fe(struct saa7134_dev *dev, 583 struct tda1004x_config *cdec_conf, 584 struct tda827x_config *tuner_conf) 585 { 586 struct vb2_dvb_frontend *fe0; 587 588 /* Get the first frontend */ 589 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1); 590 591 if (!fe0) 592 return -EINVAL; 593 594 fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); 595 if (fe0->dvb.frontend) { 596 if (cdec_conf->i2c_gate) 597 fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; 598 if (dvb_attach(tda827x_attach, fe0->dvb.frontend, 599 cdec_conf->tuner_address, 600 &dev->i2c_adap, tuner_conf)) 601 return 0; 602 603 pr_warn("no tda827x tuner found at addr: %02x\n", 604 cdec_conf->tuner_address); 605 } 606 return -EINVAL; 607 } 608 609 /* ------------------------------------------------------------------ */ 610 611 static struct tda827x_config tda827x_cfg_0 = { 612 .init = philips_tda827x_tuner_init, 613 .sleep = philips_tda827x_tuner_sleep, 614 .config = 0, 615 .switch_addr = 0 616 }; 617 618 static struct tda827x_config tda827x_cfg_1 = { 619 .init = philips_tda827x_tuner_init, 620 .sleep = philips_tda827x_tuner_sleep, 621 .config = 1, 622 .switch_addr = 0x4b 623 }; 624 625 static struct tda827x_config tda827x_cfg_2 = { 626 .init = philips_tda827x_tuner_init, 627 .sleep = philips_tda827x_tuner_sleep, 628 .config = 2, 629 .switch_addr = 0x4b 630 }; 631 632 static struct tda827x_config tda827x_cfg_2_sw42 = { 633 .init = philips_tda827x_tuner_init, 634 .sleep = philips_tda827x_tuner_sleep, 635 .config = 2, 636 .switch_addr = 0x42 637 }; 638 639 /* ------------------------------------------------------------------ */ 640 641 static struct tda1004x_config tda827x_lifeview_config = { 642 .demod_address = 0x08, 643 .invert = 1, 644 .invert_oclk = 0, 645 .xtal_freq = TDA10046_XTAL_16M, 646 .agc_config = TDA10046_AGC_TDA827X, 647 .gpio_config = TDA10046_GP11_I, 648 .if_freq = TDA10046_FREQ_045, 649 .tuner_address = 0x60, 650 .request_firmware = philips_tda1004x_request_firmware 651 }; 652 653 static struct tda1004x_config philips_tiger_config = { 654 .demod_address = 0x08, 655 .invert = 1, 656 .invert_oclk = 0, 657 .xtal_freq = TDA10046_XTAL_16M, 658 .agc_config = TDA10046_AGC_TDA827X, 659 .gpio_config = TDA10046_GP11_I, 660 .if_freq = TDA10046_FREQ_045, 661 .i2c_gate = 0x4b, 662 .tuner_address = 0x61, 663 .antenna_switch= 1, 664 .request_firmware = philips_tda1004x_request_firmware 665 }; 666 667 static struct tda1004x_config cinergy_ht_config = { 668 .demod_address = 0x08, 669 .invert = 1, 670 .invert_oclk = 0, 671 .xtal_freq = TDA10046_XTAL_16M, 672 .agc_config = TDA10046_AGC_TDA827X, 673 .gpio_config = TDA10046_GP01_I, 674 .if_freq = TDA10046_FREQ_045, 675 .i2c_gate = 0x4b, 676 .tuner_address = 0x61, 677 .request_firmware = philips_tda1004x_request_firmware 678 }; 679 680 static struct tda1004x_config cinergy_ht_pci_config = { 681 .demod_address = 0x08, 682 .invert = 1, 683 .invert_oclk = 0, 684 .xtal_freq = TDA10046_XTAL_16M, 685 .agc_config = TDA10046_AGC_TDA827X, 686 .gpio_config = TDA10046_GP01_I, 687 .if_freq = TDA10046_FREQ_045, 688 .i2c_gate = 0x4b, 689 .tuner_address = 0x60, 690 .request_firmware = philips_tda1004x_request_firmware 691 }; 692 693 static struct tda1004x_config philips_tiger_s_config = { 694 .demod_address = 0x08, 695 .invert = 1, 696 .invert_oclk = 0, 697 .xtal_freq = TDA10046_XTAL_16M, 698 .agc_config = TDA10046_AGC_TDA827X, 699 .gpio_config = TDA10046_GP01_I, 700 .if_freq = TDA10046_FREQ_045, 701 .i2c_gate = 0x4b, 702 .tuner_address = 0x61, 703 .antenna_switch= 1, 704 .request_firmware = philips_tda1004x_request_firmware 705 }; 706 707 static struct tda1004x_config pinnacle_pctv_310i_config = { 708 .demod_address = 0x08, 709 .invert = 1, 710 .invert_oclk = 0, 711 .xtal_freq = TDA10046_XTAL_16M, 712 .agc_config = TDA10046_AGC_TDA827X, 713 .gpio_config = TDA10046_GP11_I, 714 .if_freq = TDA10046_FREQ_045, 715 .i2c_gate = 0x4b, 716 .tuner_address = 0x61, 717 .request_firmware = philips_tda1004x_request_firmware 718 }; 719 720 static struct tda1004x_config hauppauge_hvr_1110_config = { 721 .demod_address = 0x08, 722 .invert = 1, 723 .invert_oclk = 0, 724 .xtal_freq = TDA10046_XTAL_16M, 725 .agc_config = TDA10046_AGC_TDA827X, 726 .gpio_config = TDA10046_GP11_I, 727 .if_freq = TDA10046_FREQ_045, 728 .i2c_gate = 0x4b, 729 .tuner_address = 0x61, 730 .request_firmware = philips_tda1004x_request_firmware 731 }; 732 733 static struct tda1004x_config asus_p7131_dual_config = { 734 .demod_address = 0x08, 735 .invert = 1, 736 .invert_oclk = 0, 737 .xtal_freq = TDA10046_XTAL_16M, 738 .agc_config = TDA10046_AGC_TDA827X, 739 .gpio_config = TDA10046_GP11_I, 740 .if_freq = TDA10046_FREQ_045, 741 .i2c_gate = 0x4b, 742 .tuner_address = 0x61, 743 .antenna_switch= 2, 744 .request_firmware = philips_tda1004x_request_firmware 745 }; 746 747 static struct tda1004x_config lifeview_trio_config = { 748 .demod_address = 0x09, 749 .invert = 1, 750 .invert_oclk = 0, 751 .xtal_freq = TDA10046_XTAL_16M, 752 .agc_config = TDA10046_AGC_TDA827X, 753 .gpio_config = TDA10046_GP00_I, 754 .if_freq = TDA10046_FREQ_045, 755 .tuner_address = 0x60, 756 .request_firmware = philips_tda1004x_request_firmware 757 }; 758 759 static struct tda1004x_config tevion_dvbt220rf_config = { 760 .demod_address = 0x08, 761 .invert = 1, 762 .invert_oclk = 0, 763 .xtal_freq = TDA10046_XTAL_16M, 764 .agc_config = TDA10046_AGC_TDA827X, 765 .gpio_config = TDA10046_GP11_I, 766 .if_freq = TDA10046_FREQ_045, 767 .tuner_address = 0x60, 768 .request_firmware = philips_tda1004x_request_firmware 769 }; 770 771 static struct tda1004x_config md8800_dvbt_config = { 772 .demod_address = 0x08, 773 .invert = 1, 774 .invert_oclk = 0, 775 .xtal_freq = TDA10046_XTAL_16M, 776 .agc_config = TDA10046_AGC_TDA827X, 777 .gpio_config = TDA10046_GP01_I, 778 .if_freq = TDA10046_FREQ_045, 779 .i2c_gate = 0x4b, 780 .tuner_address = 0x60, 781 .request_firmware = philips_tda1004x_request_firmware 782 }; 783 784 static struct tda1004x_config asus_p7131_4871_config = { 785 .demod_address = 0x08, 786 .invert = 1, 787 .invert_oclk = 0, 788 .xtal_freq = TDA10046_XTAL_16M, 789 .agc_config = TDA10046_AGC_TDA827X, 790 .gpio_config = TDA10046_GP01_I, 791 .if_freq = TDA10046_FREQ_045, 792 .i2c_gate = 0x4b, 793 .tuner_address = 0x61, 794 .antenna_switch= 2, 795 .request_firmware = philips_tda1004x_request_firmware 796 }; 797 798 static struct tda1004x_config asus_p7131_hybrid_lna_config = { 799 .demod_address = 0x08, 800 .invert = 1, 801 .invert_oclk = 0, 802 .xtal_freq = TDA10046_XTAL_16M, 803 .agc_config = TDA10046_AGC_TDA827X, 804 .gpio_config = TDA10046_GP11_I, 805 .if_freq = TDA10046_FREQ_045, 806 .i2c_gate = 0x4b, 807 .tuner_address = 0x61, 808 .antenna_switch= 2, 809 .request_firmware = philips_tda1004x_request_firmware 810 }; 811 812 static struct tda1004x_config kworld_dvb_t_210_config = { 813 .demod_address = 0x08, 814 .invert = 1, 815 .invert_oclk = 0, 816 .xtal_freq = TDA10046_XTAL_16M, 817 .agc_config = TDA10046_AGC_TDA827X, 818 .gpio_config = TDA10046_GP11_I, 819 .if_freq = TDA10046_FREQ_045, 820 .i2c_gate = 0x4b, 821 .tuner_address = 0x61, 822 .antenna_switch= 1, 823 .request_firmware = philips_tda1004x_request_firmware 824 }; 825 826 static struct tda1004x_config avermedia_super_007_config = { 827 .demod_address = 0x08, 828 .invert = 1, 829 .invert_oclk = 0, 830 .xtal_freq = TDA10046_XTAL_16M, 831 .agc_config = TDA10046_AGC_TDA827X, 832 .gpio_config = TDA10046_GP01_I, 833 .if_freq = TDA10046_FREQ_045, 834 .i2c_gate = 0x4b, 835 .tuner_address = 0x60, 836 .antenna_switch= 1, 837 .request_firmware = philips_tda1004x_request_firmware 838 }; 839 840 static struct tda1004x_config twinhan_dtv_dvb_3056_config = { 841 .demod_address = 0x08, 842 .invert = 1, 843 .invert_oclk = 0, 844 .xtal_freq = TDA10046_XTAL_16M, 845 .agc_config = TDA10046_AGC_TDA827X, 846 .gpio_config = TDA10046_GP01_I, 847 .if_freq = TDA10046_FREQ_045, 848 .i2c_gate = 0x42, 849 .tuner_address = 0x61, 850 .antenna_switch = 1, 851 .request_firmware = philips_tda1004x_request_firmware 852 }; 853 854 static struct tda1004x_config asus_tiger_3in1_config = { 855 .demod_address = 0x0b, 856 .invert = 1, 857 .invert_oclk = 0, 858 .xtal_freq = TDA10046_XTAL_16M, 859 .agc_config = TDA10046_AGC_TDA827X, 860 .gpio_config = TDA10046_GP11_I, 861 .if_freq = TDA10046_FREQ_045, 862 .i2c_gate = 0x4b, 863 .tuner_address = 0x61, 864 .antenna_switch = 1, 865 .request_firmware = philips_tda1004x_request_firmware 866 }; 867 868 static struct tda1004x_config asus_ps3_100_config = { 869 .demod_address = 0x0b, 870 .invert = 1, 871 .invert_oclk = 0, 872 .xtal_freq = TDA10046_XTAL_16M, 873 .agc_config = TDA10046_AGC_TDA827X, 874 .gpio_config = TDA10046_GP11_I, 875 .if_freq = TDA10046_FREQ_045, 876 .i2c_gate = 0x4b, 877 .tuner_address = 0x61, 878 .antenna_switch = 1, 879 .request_firmware = philips_tda1004x_request_firmware 880 }; 881 882 /* ------------------------------------------------------------------ 883 * special case: this card uses saa713x GPIO22 for the mode switch 884 */ 885 886 static int ads_duo_tuner_init(struct dvb_frontend *fe) 887 { 888 struct saa7134_dev *dev = fe->dvb->priv; 889 philips_tda827x_tuner_init(fe); 890 /* route TDA8275a AGC input to the channel decoder */ 891 saa7134_set_gpio(dev, 22, 1); 892 return 0; 893 } 894 895 static int ads_duo_tuner_sleep(struct dvb_frontend *fe) 896 { 897 struct saa7134_dev *dev = fe->dvb->priv; 898 /* route TDA8275a AGC input to the analog IF chip*/ 899 saa7134_set_gpio(dev, 22, 0); 900 philips_tda827x_tuner_sleep(fe); 901 return 0; 902 } 903 904 static struct tda827x_config ads_duo_cfg = { 905 .init = ads_duo_tuner_init, 906 .sleep = ads_duo_tuner_sleep, 907 .config = 0 908 }; 909 910 static struct tda1004x_config ads_tech_duo_config = { 911 .demod_address = 0x08, 912 .invert = 1, 913 .invert_oclk = 0, 914 .xtal_freq = TDA10046_XTAL_16M, 915 .agc_config = TDA10046_AGC_TDA827X, 916 .gpio_config = TDA10046_GP00_I, 917 .if_freq = TDA10046_FREQ_045, 918 .tuner_address = 0x61, 919 .request_firmware = philips_tda1004x_request_firmware 920 }; 921 922 static struct zl10353_config behold_h6_config = { 923 .demod_address = 0x1e>>1, 924 .no_tuner = 1, 925 .parallel_ts = 1, 926 .disable_i2c_gate_ctrl = 1, 927 }; 928 929 static struct xc5000_config behold_x7_tunerconfig = { 930 .i2c_address = 0xc2>>1, 931 .if_khz = 4560, 932 .radio_input = XC5000_RADIO_FM1, 933 }; 934 935 static struct zl10353_config behold_x7_config = { 936 .demod_address = 0x1e>>1, 937 .if2 = 45600, 938 .no_tuner = 1, 939 .parallel_ts = 1, 940 .disable_i2c_gate_ctrl = 1, 941 }; 942 943 static struct zl10353_config videomate_t750_zl10353_config = { 944 .demod_address = 0x0f, 945 .no_tuner = 1, 946 .parallel_ts = 1, 947 .disable_i2c_gate_ctrl = 1, 948 }; 949 950 static struct qt1010_config videomate_t750_qt1010_config = { 951 .i2c_address = 0x62 952 }; 953 954 955 /* ================================================================== 956 * tda10086 based DVB-S cards, helper functions 957 */ 958 959 static struct tda10086_config flydvbs = { 960 .demod_address = 0x0e, 961 .invert = 0, 962 .diseqc_tone = 0, 963 .xtal_freq = TDA10086_XTAL_16M, 964 }; 965 966 static struct tda10086_config sd1878_4m = { 967 .demod_address = 0x0e, 968 .invert = 0, 969 .diseqc_tone = 0, 970 .xtal_freq = TDA10086_XTAL_4M, 971 }; 972 973 /* ------------------------------------------------------------------ 974 * special case: lnb supply is connected to the gated i2c 975 */ 976 977 static int md8800_set_voltage(struct dvb_frontend *fe, 978 enum fe_sec_voltage voltage) 979 { 980 int res = -EIO; 981 struct saa7134_dev *dev = fe->dvb->priv; 982 if (fe->ops.i2c_gate_ctrl) { 983 fe->ops.i2c_gate_ctrl(fe, 1); 984 if (dev->original_set_voltage) 985 res = dev->original_set_voltage(fe, voltage); 986 fe->ops.i2c_gate_ctrl(fe, 0); 987 } 988 return res; 989 }; 990 991 static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) 992 { 993 int res = -EIO; 994 struct saa7134_dev *dev = fe->dvb->priv; 995 if (fe->ops.i2c_gate_ctrl) { 996 fe->ops.i2c_gate_ctrl(fe, 1); 997 if (dev->original_set_high_voltage) 998 res = dev->original_set_high_voltage(fe, arg); 999 fe->ops.i2c_gate_ctrl(fe, 0); 1000 } 1001 return res; 1002 }; 1003 1004 static int md8800_set_voltage2(struct dvb_frontend *fe, 1005 enum fe_sec_voltage voltage) 1006 { 1007 struct saa7134_dev *dev = fe->dvb->priv; 1008 u8 wbuf[2] = { 0x1f, 00 }; 1009 u8 rbuf; 1010 struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, 1011 { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; 1012 1013 if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) 1014 return -EIO; 1015 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ 1016 if (voltage == SEC_VOLTAGE_18) 1017 wbuf[1] = rbuf | 0x10; 1018 else 1019 wbuf[1] = rbuf & 0xef; 1020 msg[0].len = 2; 1021 i2c_transfer(&dev->i2c_adap, msg, 1); 1022 return 0; 1023 } 1024 1025 static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) 1026 { 1027 pr_warn("%s: sorry can't set high LNB supply voltage from here\n", 1028 __func__); 1029 return -EIO; 1030 } 1031 1032 /* ================================================================== 1033 * nxt200x based ATSC cards, helper functions 1034 */ 1035 1036 static const struct nxt200x_config avertvhda180 = { 1037 .demod_address = 0x0a, 1038 }; 1039 1040 static const struct nxt200x_config kworldatsc110 = { 1041 .demod_address = 0x0a, 1042 }; 1043 1044 /* ------------------------------------------------------------------ */ 1045 1046 static struct mt312_config avertv_a700_mt312 = { 1047 .demod_address = 0x0e, 1048 .voltage_inverted = 1, 1049 }; 1050 1051 static struct zl10036_config avertv_a700_tuner = { 1052 .tuner_address = 0x60, 1053 }; 1054 1055 static struct mt312_config zl10313_compro_s350_config = { 1056 .demod_address = 0x0e, 1057 }; 1058 1059 static struct mt312_config zl10313_avermedia_a706_config = { 1060 .demod_address = 0x0e, 1061 }; 1062 1063 static struct lgdt3305_config hcw_lgdt3305_config = { 1064 .i2c_addr = 0x0e, 1065 .mpeg_mode = LGDT3305_MPEG_SERIAL, 1066 .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, 1067 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, 1068 .deny_i2c_rptr = 1, 1069 .spectral_inversion = 1, 1070 .qam_if_khz = 4000, 1071 .vsb_if_khz = 3250, 1072 }; 1073 1074 static struct tda10048_config hcw_tda10048_config = { 1075 .demod_address = 0x10 >> 1, 1076 .output_mode = TDA10048_SERIAL_OUTPUT, 1077 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1078 .inversion = TDA10048_INVERSION_ON, 1079 .dtv6_if_freq_khz = TDA10048_IF_3300, 1080 .dtv7_if_freq_khz = TDA10048_IF_3500, 1081 .dtv8_if_freq_khz = TDA10048_IF_4000, 1082 .clk_freq_khz = TDA10048_CLK_16000, 1083 .disable_gate_access = 1, 1084 }; 1085 1086 static struct tda18271_std_map hauppauge_tda18271_std_map = { 1087 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, 1088 .if_lvl = 1, .rfagc_top = 0x58, }, 1089 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, 1090 .if_lvl = 1, .rfagc_top = 0x58, }, 1091 }; 1092 1093 static struct tda18271_config hcw_tda18271_config = { 1094 .std_map = &hauppauge_tda18271_std_map, 1095 .gate = TDA18271_GATE_ANALOG, 1096 .config = 3, 1097 .output_opt = TDA18271_OUTPUT_LT_OFF, 1098 }; 1099 1100 static struct tda829x_config tda829x_no_probe = { 1101 .probe_tuner = TDA829X_DONT_PROBE, 1102 }; 1103 1104 static struct tda10048_config zolid_tda10048_config = { 1105 .demod_address = 0x10 >> 1, 1106 .output_mode = TDA10048_PARALLEL_OUTPUT, 1107 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1108 .inversion = TDA10048_INVERSION_ON, 1109 .dtv6_if_freq_khz = TDA10048_IF_3300, 1110 .dtv7_if_freq_khz = TDA10048_IF_3500, 1111 .dtv8_if_freq_khz = TDA10048_IF_4000, 1112 .clk_freq_khz = TDA10048_CLK_16000, 1113 .disable_gate_access = 1, 1114 }; 1115 1116 static struct tda18271_config zolid_tda18271_config = { 1117 .gate = TDA18271_GATE_ANALOG, 1118 }; 1119 1120 static struct tda10048_config dtv1000s_tda10048_config = { 1121 .demod_address = 0x10 >> 1, 1122 .output_mode = TDA10048_PARALLEL_OUTPUT, 1123 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1124 .inversion = TDA10048_INVERSION_ON, 1125 .dtv6_if_freq_khz = TDA10048_IF_3300, 1126 .dtv7_if_freq_khz = TDA10048_IF_3800, 1127 .dtv8_if_freq_khz = TDA10048_IF_4300, 1128 .clk_freq_khz = TDA10048_CLK_16000, 1129 .disable_gate_access = 1, 1130 }; 1131 1132 static struct tda18271_std_map dtv1000s_tda18271_std_map = { 1133 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, 1134 .if_lvl = 1, .rfagc_top = 0x37, }, 1135 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, 1136 .if_lvl = 1, .rfagc_top = 0x37, }, 1137 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, 1138 .if_lvl = 1, .rfagc_top = 0x37, }, 1139 }; 1140 1141 static struct tda18271_config dtv1000s_tda18271_config = { 1142 .std_map = &dtv1000s_tda18271_std_map, 1143 .gate = TDA18271_GATE_ANALOG, 1144 }; 1145 1146 static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = { 1147 .prod = LGS8GXX_PROD_LGS8G75, 1148 .demod_address = 0x1d, 1149 .serial_ts = 0, 1150 .ts_clk_pol = 1, 1151 .ts_clk_gated = 0, 1152 .if_clk_freq = 30400, /* 30.4 MHz */ 1153 .if_freq = 4000, /* 4.00 MHz */ 1154 .if_neg_center = 0, 1155 .ext_adc = 0, 1156 .adc_signed = 1, 1157 .adc_vpp = 3, /* 2.0 Vpp */ 1158 .if_neg_edge = 1, 1159 }; 1160 1161 static struct tda18271_config prohdtv_pro2_tda18271_config = { 1162 .gate = TDA18271_GATE_ANALOG, 1163 .output_opt = TDA18271_OUTPUT_LT_OFF, 1164 }; 1165 1166 static struct tda18271_std_map kworld_tda18271_std_map = { 1167 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, 1168 .if_lvl = 6, .rfagc_top = 0x37 }, 1169 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, 1170 .if_lvl = 6, .rfagc_top = 0x37 }, 1171 }; 1172 1173 static struct tda18271_config kworld_pc150u_tda18271_config = { 1174 .std_map = &kworld_tda18271_std_map, 1175 .gate = TDA18271_GATE_ANALOG, 1176 .output_opt = TDA18271_OUTPUT_LT_OFF, 1177 .config = 3, /* Use tuner callback for AGC */ 1178 .rf_cal_on_startup = 1 1179 }; 1180 1181 static struct s5h1411_config kworld_s5h1411_config = { 1182 .output_mode = S5H1411_PARALLEL_OUTPUT, 1183 .gpio = S5H1411_GPIO_OFF, 1184 .qam_if = S5H1411_IF_4000, 1185 .vsb_if = S5H1411_IF_3250, 1186 .inversion = S5H1411_INVERSION_ON, 1187 .status_mode = S5H1411_DEMODLOCKING, 1188 .mpeg_timing = 1189 S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK, 1190 }; 1191 1192 static struct tda18271_config hdtv200h_tda18271_config = { 1193 .gate = TDA18271_GATE_ANALOG, 1194 .config = 3 /* Use tuner callback for AGC */ 1195 }; 1196 1197 static struct s5h1411_config hdtv200h_s5h1411_config = { 1198 .output_mode = S5H1411_PARALLEL_OUTPUT, 1199 .gpio = S5H1411_GPIO_OFF, 1200 .qam_if = S5H1411_IF_4000, 1201 .vsb_if = S5H1411_IF_3250, 1202 .inversion = S5H1411_INVERSION_ON, 1203 .status_mode = S5H1411_DEMODLOCKING, 1204 .mpeg_timing = 1205 S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK, 1206 }; 1207 1208 1209 /* ================================================================== 1210 * Core code 1211 */ 1212 1213 static int dvb_init(struct saa7134_dev *dev) 1214 { 1215 int ret; 1216 int attach_xc3028 = 0; 1217 struct vb2_dvb_frontend *fe0; 1218 struct vb2_queue *q; 1219 1220 /* FIXME: add support for multi-frontend */ 1221 mutex_init(&dev->frontends.lock); 1222 INIT_LIST_HEAD(&dev->frontends.felist); 1223 1224 pr_info("%s() allocating 1 frontend\n", __func__); 1225 fe0 = vb2_dvb_alloc_frontend(&dev->frontends, 1); 1226 if (!fe0) { 1227 pr_err("%s() failed to alloc\n", __func__); 1228 return -ENOMEM; 1229 } 1230 1231 /* init struct vb2_dvb */ 1232 dev->ts.nr_bufs = 32; 1233 dev->ts.nr_packets = 32*4; 1234 fe0->dvb.name = dev->name; 1235 q = &fe0->dvb.dvbq; 1236 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; 1237 q->io_modes = VB2_MMAP | VB2_READ; 1238 q->drv_priv = &dev->ts_q; 1239 q->ops = &saa7134_ts_qops; 1240 q->mem_ops = &vb2_dma_sg_memops; 1241 q->buf_struct_size = sizeof(struct saa7134_buf); 1242 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; 1243 q->lock = &dev->lock; 1244 q->dev = &dev->pci->dev; 1245 ret = vb2_queue_init(q); 1246 if (ret) { 1247 vb2_dvb_dealloc_frontends(&dev->frontends); 1248 return ret; 1249 } 1250 1251 switch (dev->board) { 1252 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: 1253 pr_debug("pinnacle 300i dvb setup\n"); 1254 fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, 1255 &dev->i2c_adap); 1256 if (fe0->dvb.frontend) { 1257 fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; 1258 } 1259 break; 1260 case SAA7134_BOARD_AVERMEDIA_777: 1261 case SAA7134_BOARD_AVERMEDIA_A16AR: 1262 pr_debug("avertv 777 dvb setup\n"); 1263 fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, 1264 &dev->i2c_adap); 1265 if (fe0->dvb.frontend) { 1266 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1267 &dev->i2c_adap, 0x61, 1268 TUNER_PHILIPS_TD1316); 1269 } 1270 break; 1271 case SAA7134_BOARD_AVERMEDIA_A16D: 1272 pr_debug("AverMedia A16D dvb setup\n"); 1273 fe0->dvb.frontend = dvb_attach(mt352_attach, 1274 &avermedia_xc3028_mt352_dev, 1275 &dev->i2c_adap); 1276 attach_xc3028 = 1; 1277 break; 1278 case SAA7134_BOARD_MD7134: 1279 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1280 &medion_cardbus, 1281 &dev->i2c_adap); 1282 if (fe0->dvb.frontend) { 1283 /* 1284 * The TV tuner on this board is actually NOT 1285 * behind the demod i2c gate. 1286 * However, the demod EEPROM is indeed there and it 1287 * conflicts with the SAA7134 chip config EEPROM 1288 * if the i2c gate is open (since they have same 1289 * bus addresses) resulting in card PCI SVID / SSID 1290 * being garbage after a reboot from time to time. 1291 * 1292 * Let's just leave the gate permanently closed - 1293 * saa7134_i2c_eeprom_md7134_gate() will close it for 1294 * us at probe time if it was open for some reason. 1295 */ 1296 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; 1297 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1298 &dev->i2c_adap, medion_cardbus.tuner_address, 1299 TUNER_PHILIPS_FMD1216ME_MK3); 1300 } 1301 break; 1302 case SAA7134_BOARD_PHILIPS_TOUGH: 1303 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1304 &philips_tu1216_60_config, 1305 &dev->i2c_adap); 1306 if (fe0->dvb.frontend) { 1307 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; 1308 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; 1309 } 1310 break; 1311 case SAA7134_BOARD_FLYDVBTDUO: 1312 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: 1313 if (configure_tda827x_fe(dev, &tda827x_lifeview_config, 1314 &tda827x_cfg_0) < 0) 1315 goto detach_frontend; 1316 break; 1317 case SAA7134_BOARD_PHILIPS_EUROPA: 1318 case SAA7134_BOARD_VIDEOMATE_DVBT_300: 1319 case SAA7134_BOARD_ASUS_EUROPA_HYBRID: 1320 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1321 &philips_europa_config, 1322 &dev->i2c_adap); 1323 if (fe0->dvb.frontend) { 1324 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1325 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1326 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; 1327 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; 1328 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1329 } 1330 break; 1331 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: 1332 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1333 &technotrend_budget_t3000_config, 1334 &dev->i2c_adap); 1335 if (fe0->dvb.frontend) { 1336 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1337 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1338 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; 1339 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; 1340 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1341 } 1342 break; 1343 case SAA7134_BOARD_VIDEOMATE_DVBT_200: 1344 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1345 &philips_tu1216_61_config, 1346 &dev->i2c_adap); 1347 if (fe0->dvb.frontend) { 1348 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; 1349 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; 1350 } 1351 break; 1352 case SAA7134_BOARD_KWORLD_DVBT_210: 1353 if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, 1354 &tda827x_cfg_2) < 0) 1355 goto detach_frontend; 1356 break; 1357 case SAA7134_BOARD_HAUPPAUGE_HVR1120: 1358 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1359 &hcw_tda10048_config, 1360 &dev->i2c_adap); 1361 if (fe0->dvb.frontend != NULL) { 1362 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1363 &dev->i2c_adap, 0x4b, 1364 &tda829x_no_probe); 1365 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1366 0x60, &dev->i2c_adap, 1367 &hcw_tda18271_config); 1368 } 1369 break; 1370 case SAA7134_BOARD_PHILIPS_TIGER: 1371 if (configure_tda827x_fe(dev, &philips_tiger_config, 1372 &tda827x_cfg_0) < 0) 1373 goto detach_frontend; 1374 break; 1375 case SAA7134_BOARD_PINNACLE_PCTV_310i: 1376 if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, 1377 &tda827x_cfg_1) < 0) 1378 goto detach_frontend; 1379 break; 1380 case SAA7134_BOARD_HAUPPAUGE_HVR1110: 1381 if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, 1382 &tda827x_cfg_1) < 0) 1383 goto detach_frontend; 1384 break; 1385 case SAA7134_BOARD_HAUPPAUGE_HVR1150: 1386 fe0->dvb.frontend = dvb_attach(lgdt3305_attach, 1387 &hcw_lgdt3305_config, 1388 &dev->i2c_adap); 1389 if (fe0->dvb.frontend) { 1390 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1391 &dev->i2c_adap, 0x4b, 1392 &tda829x_no_probe); 1393 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1394 0x60, &dev->i2c_adap, 1395 &hcw_tda18271_config); 1396 } 1397 break; 1398 case SAA7134_BOARD_ASUSTeK_P7131_DUAL: 1399 if (configure_tda827x_fe(dev, &asus_p7131_dual_config, 1400 &tda827x_cfg_0) < 0) 1401 goto detach_frontend; 1402 break; 1403 case SAA7134_BOARD_FLYDVBT_LR301: 1404 if (configure_tda827x_fe(dev, &tda827x_lifeview_config, 1405 &tda827x_cfg_0) < 0) 1406 goto detach_frontend; 1407 break; 1408 case SAA7134_BOARD_FLYDVB_TRIO: 1409 if (!use_frontend) { /* terrestrial */ 1410 if (configure_tda827x_fe(dev, &lifeview_trio_config, 1411 &tda827x_cfg_0) < 0) 1412 goto detach_frontend; 1413 } else { /* satellite */ 1414 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); 1415 if (fe0->dvb.frontend) { 1416 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63, 1417 &dev->i2c_adap, 0) == NULL) { 1418 pr_warn("%s: Lifeview Trio, No tda826x found!\n", 1419 __func__); 1420 goto detach_frontend; 1421 } 1422 if (dvb_attach(isl6421_attach, fe0->dvb.frontend, 1423 &dev->i2c_adap, 1424 0x08, 0, 0, false) == NULL) { 1425 pr_warn("%s: Lifeview Trio, No ISL6421 found!\n", 1426 __func__); 1427 goto detach_frontend; 1428 } 1429 } 1430 } 1431 break; 1432 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: 1433 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: 1434 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1435 &ads_tech_duo_config, 1436 &dev->i2c_adap); 1437 if (fe0->dvb.frontend) { 1438 if (dvb_attach(tda827x_attach,fe0->dvb.frontend, 1439 ads_tech_duo_config.tuner_address, &dev->i2c_adap, 1440 &ads_duo_cfg) == NULL) { 1441 pr_warn("no tda827x tuner found at addr: %02x\n", 1442 ads_tech_duo_config.tuner_address); 1443 goto detach_frontend; 1444 } 1445 } else 1446 pr_warn("failed to attach tda10046\n"); 1447 break; 1448 case SAA7134_BOARD_TEVION_DVBT_220RF: 1449 if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, 1450 &tda827x_cfg_0) < 0) 1451 goto detach_frontend; 1452 break; 1453 case SAA7134_BOARD_MEDION_MD8800_QUADRO: 1454 if (!use_frontend) { /* terrestrial */ 1455 if (configure_tda827x_fe(dev, &md8800_dvbt_config, 1456 &tda827x_cfg_0) < 0) 1457 goto detach_frontend; 1458 } else { /* satellite */ 1459 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1460 &flydvbs, &dev->i2c_adap); 1461 if (fe0->dvb.frontend) { 1462 struct dvb_frontend *fe = fe0->dvb.frontend; 1463 u8 dev_id = dev->eedata[2]; 1464 u8 data = 0xc4; 1465 struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; 1466 1467 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 1468 0x60, &dev->i2c_adap, 0) == NULL) { 1469 pr_warn("%s: Medion Quadro, no tda826x found !\n", 1470 __func__); 1471 goto detach_frontend; 1472 } 1473 if (dev_id != 0x08) { 1474 /* we need to open the i2c gate (we know it exists) */ 1475 fe->ops.i2c_gate_ctrl(fe, 1); 1476 if (dvb_attach(isl6405_attach, fe, 1477 &dev->i2c_adap, 0x08, 0, 0) == NULL) { 1478 pr_warn("%s: Medion Quadro, no ISL6405 found !\n", 1479 __func__); 1480 goto detach_frontend; 1481 } 1482 if (dev_id == 0x07) { 1483 /* fire up the 2nd section of the LNB supply since 1484 we can't do this from the other section */ 1485 msg.buf = &data; 1486 i2c_transfer(&dev->i2c_adap, &msg, 1); 1487 } 1488 fe->ops.i2c_gate_ctrl(fe, 0); 1489 dev->original_set_voltage = fe->ops.set_voltage; 1490 fe->ops.set_voltage = md8800_set_voltage; 1491 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; 1492 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; 1493 } else { 1494 fe->ops.set_voltage = md8800_set_voltage2; 1495 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; 1496 } 1497 } 1498 } 1499 break; 1500 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: 1501 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, 1502 &dev->i2c_adap); 1503 if (fe0->dvb.frontend) 1504 dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, 1505 NULL, DVB_PLL_TDHU2); 1506 break; 1507 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: 1508 case SAA7134_BOARD_KWORLD_ATSC110: 1509 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, 1510 &dev->i2c_adap); 1511 if (fe0->dvb.frontend) 1512 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1513 &dev->i2c_adap, 0x61, 1514 TUNER_PHILIPS_TUV1236D); 1515 break; 1516 case SAA7134_BOARD_KWORLD_PC150U: 1517 saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */ 1518 saa7134_tuner_callback(dev, 0, 1519 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); 1520 fe0->dvb.frontend = dvb_attach(s5h1411_attach, 1521 &kworld_s5h1411_config, 1522 &dev->i2c_adap); 1523 if (fe0->dvb.frontend != NULL) { 1524 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1525 &dev->i2c_adap, 0x4b, 1526 &tda829x_no_probe); 1527 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1528 0x60, &dev->i2c_adap, 1529 &kworld_pc150u_tda18271_config); 1530 } 1531 break; 1532 case SAA7134_BOARD_FLYDVBS_LR300: 1533 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, 1534 &dev->i2c_adap); 1535 if (fe0->dvb.frontend) { 1536 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, 1537 &dev->i2c_adap, 0) == NULL) { 1538 pr_warn("%s: No tda826x found!\n", __func__); 1539 goto detach_frontend; 1540 } 1541 if (dvb_attach(isl6421_attach, fe0->dvb.frontend, 1542 &dev->i2c_adap, 1543 0x08, 0, 0, false) == NULL) { 1544 pr_warn("%s: No ISL6421 found!\n", __func__); 1545 goto detach_frontend; 1546 } 1547 } 1548 break; 1549 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: 1550 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1551 &medion_cardbus, 1552 &dev->i2c_adap); 1553 if (fe0->dvb.frontend) { 1554 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1555 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1556 1557 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1558 &dev->i2c_adap, medion_cardbus.tuner_address, 1559 TUNER_PHILIPS_FMD1216ME_MK3); 1560 } 1561 break; 1562 case SAA7134_BOARD_VIDEOMATE_DVBT_200A: 1563 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1564 &philips_europa_config, 1565 &dev->i2c_adap); 1566 if (fe0->dvb.frontend) { 1567 fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; 1568 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1569 } 1570 break; 1571 case SAA7134_BOARD_CINERGY_HT_PCMCIA: 1572 if (configure_tda827x_fe(dev, &cinergy_ht_config, 1573 &tda827x_cfg_0) < 0) 1574 goto detach_frontend; 1575 break; 1576 case SAA7134_BOARD_CINERGY_HT_PCI: 1577 if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, 1578 &tda827x_cfg_0) < 0) 1579 goto detach_frontend; 1580 break; 1581 case SAA7134_BOARD_PHILIPS_TIGER_S: 1582 if (configure_tda827x_fe(dev, &philips_tiger_s_config, 1583 &tda827x_cfg_2) < 0) 1584 goto detach_frontend; 1585 break; 1586 case SAA7134_BOARD_ASUS_P7131_4871: 1587 if (configure_tda827x_fe(dev, &asus_p7131_4871_config, 1588 &tda827x_cfg_2) < 0) 1589 goto detach_frontend; 1590 break; 1591 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: 1592 if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, 1593 &tda827x_cfg_2) < 0) 1594 goto detach_frontend; 1595 break; 1596 case SAA7134_BOARD_AVERMEDIA_SUPER_007: 1597 if (configure_tda827x_fe(dev, &avermedia_super_007_config, 1598 &tda827x_cfg_0) < 0) 1599 goto detach_frontend; 1600 break; 1601 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: 1602 if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, 1603 &tda827x_cfg_2_sw42) < 0) 1604 goto detach_frontend; 1605 break; 1606 case SAA7134_BOARD_PHILIPS_SNAKE: 1607 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, 1608 &dev->i2c_adap); 1609 if (fe0->dvb.frontend) { 1610 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, 1611 &dev->i2c_adap, 0) == NULL) { 1612 pr_warn("%s: No tda826x found!\n", __func__); 1613 goto detach_frontend; 1614 } 1615 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1616 &dev->i2c_adap, 0, 0) == NULL) { 1617 pr_warn("%s: No lnbp21 found!\n", __func__); 1618 goto detach_frontend; 1619 } 1620 } 1621 break; 1622 case SAA7134_BOARD_CREATIX_CTX953: 1623 if (configure_tda827x_fe(dev, &md8800_dvbt_config, 1624 &tda827x_cfg_0) < 0) 1625 goto detach_frontend; 1626 break; 1627 case SAA7134_BOARD_MSI_TVANYWHERE_AD11: 1628 if (configure_tda827x_fe(dev, &philips_tiger_s_config, 1629 &tda827x_cfg_2) < 0) 1630 goto detach_frontend; 1631 break; 1632 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: 1633 pr_debug("AverMedia E506R dvb setup\n"); 1634 saa7134_set_gpio(dev, 25, 0); 1635 msleep(10); 1636 saa7134_set_gpio(dev, 25, 1); 1637 fe0->dvb.frontend = dvb_attach(mt352_attach, 1638 &avermedia_xc3028_mt352_dev, 1639 &dev->i2c_adap); 1640 attach_xc3028 = 1; 1641 break; 1642 case SAA7134_BOARD_MD7134_BRIDGE_2: 1643 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1644 &sd1878_4m, &dev->i2c_adap); 1645 if (fe0->dvb.frontend) { 1646 struct dvb_frontend *fe; 1647 if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, 1648 &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { 1649 pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n", 1650 __func__); 1651 goto detach_frontend; 1652 } 1653 /* we need to open the i2c gate (we know it exists) */ 1654 fe = fe0->dvb.frontend; 1655 fe->ops.i2c_gate_ctrl(fe, 1); 1656 if (dvb_attach(isl6405_attach, fe, 1657 &dev->i2c_adap, 0x08, 0, 0) == NULL) { 1658 pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n", 1659 __func__); 1660 goto detach_frontend; 1661 } 1662 fe->ops.i2c_gate_ctrl(fe, 0); 1663 dev->original_set_voltage = fe->ops.set_voltage; 1664 fe->ops.set_voltage = md8800_set_voltage; 1665 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; 1666 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; 1667 } 1668 break; 1669 case SAA7134_BOARD_AVERMEDIA_M103: 1670 saa7134_set_gpio(dev, 25, 0); 1671 msleep(10); 1672 saa7134_set_gpio(dev, 25, 1); 1673 fe0->dvb.frontend = dvb_attach(mt352_attach, 1674 &avermedia_xc3028_mt352_dev, 1675 &dev->i2c_adap); 1676 attach_xc3028 = 1; 1677 break; 1678 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: 1679 if (!use_frontend) { /* terrestrial */ 1680 if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, 1681 &tda827x_cfg_2) < 0) 1682 goto detach_frontend; 1683 } else { /* satellite */ 1684 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1685 &flydvbs, &dev->i2c_adap); 1686 if (fe0->dvb.frontend) { 1687 if (dvb_attach(tda826x_attach, 1688 fe0->dvb.frontend, 0x60, 1689 &dev->i2c_adap, 0) == NULL) { 1690 pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n", 1691 __func__); 1692 goto detach_frontend; 1693 } 1694 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1695 &dev->i2c_adap, 0, 0) == NULL) { 1696 pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n", 1697 __func__); 1698 goto detach_frontend; 1699 } 1700 } 1701 } 1702 break; 1703 case SAA7134_BOARD_ASUSTeK_PS3_100: 1704 if (!use_frontend) { /* terrestrial */ 1705 if (configure_tda827x_fe(dev, &asus_ps3_100_config, 1706 &tda827x_cfg_2) < 0) 1707 goto detach_frontend; 1708 } else { /* satellite */ 1709 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1710 &flydvbs, &dev->i2c_adap); 1711 if (fe0->dvb.frontend) { 1712 if (dvb_attach(tda826x_attach, 1713 fe0->dvb.frontend, 0x60, 1714 &dev->i2c_adap, 0) == NULL) { 1715 pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n", 1716 __func__); 1717 goto detach_frontend; 1718 } 1719 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1720 &dev->i2c_adap, 0, 0) == NULL) { 1721 pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n", 1722 __func__); 1723 goto detach_frontend; 1724 } 1725 } 1726 } 1727 break; 1728 case SAA7134_BOARD_ASUSTeK_TIGER: 1729 if (configure_tda827x_fe(dev, &philips_tiger_config, 1730 &tda827x_cfg_0) < 0) 1731 goto detach_frontend; 1732 break; 1733 case SAA7134_BOARD_BEHOLD_H6: 1734 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1735 &behold_h6_config, 1736 &dev->i2c_adap); 1737 if (fe0->dvb.frontend) { 1738 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1739 &dev->i2c_adap, 0x61, 1740 TUNER_PHILIPS_FMD1216MEX_MK3); 1741 } 1742 break; 1743 case SAA7134_BOARD_BEHOLD_X7: 1744 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1745 &behold_x7_config, 1746 &dev->i2c_adap); 1747 if (fe0->dvb.frontend) { 1748 dvb_attach(xc5000_attach, fe0->dvb.frontend, 1749 &dev->i2c_adap, &behold_x7_tunerconfig); 1750 } 1751 break; 1752 case SAA7134_BOARD_BEHOLD_H7: 1753 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1754 &behold_x7_config, 1755 &dev->i2c_adap); 1756 if (fe0->dvb.frontend) { 1757 dvb_attach(xc5000_attach, fe0->dvb.frontend, 1758 &dev->i2c_adap, &behold_x7_tunerconfig); 1759 } 1760 break; 1761 case SAA7134_BOARD_AVERMEDIA_A700_PRO: 1762 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: 1763 /* Zarlink ZL10313 */ 1764 fe0->dvb.frontend = dvb_attach(mt312_attach, 1765 &avertv_a700_mt312, &dev->i2c_adap); 1766 if (fe0->dvb.frontend) { 1767 if (dvb_attach(zl10036_attach, fe0->dvb.frontend, 1768 &avertv_a700_tuner, &dev->i2c_adap) == NULL) { 1769 pr_warn("%s: No zl10036 found!\n", 1770 __func__); 1771 } 1772 } 1773 break; 1774 case SAA7134_BOARD_VIDEOMATE_S350: 1775 fe0->dvb.frontend = dvb_attach(mt312_attach, 1776 &zl10313_compro_s350_config, &dev->i2c_adap); 1777 if (fe0->dvb.frontend) 1778 if (dvb_attach(zl10039_attach, fe0->dvb.frontend, 1779 0x60, &dev->i2c_adap) == NULL) 1780 pr_warn("%s: No zl10039 found!\n", 1781 __func__); 1782 1783 break; 1784 case SAA7134_BOARD_VIDEOMATE_T750: 1785 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1786 &videomate_t750_zl10353_config, 1787 &dev->i2c_adap); 1788 if (fe0->dvb.frontend != NULL) { 1789 if (dvb_attach(qt1010_attach, 1790 fe0->dvb.frontend, 1791 &dev->i2c_adap, 1792 &videomate_t750_qt1010_config) == NULL) 1793 pr_warn("error attaching QT1010\n"); 1794 } 1795 break; 1796 case SAA7134_BOARD_ZOLID_HYBRID_PCI: 1797 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1798 &zolid_tda10048_config, 1799 &dev->i2c_adap); 1800 if (fe0->dvb.frontend != NULL) { 1801 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1802 &dev->i2c_adap, 0x4b, 1803 &tda829x_no_probe); 1804 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1805 0x60, &dev->i2c_adap, 1806 &zolid_tda18271_config); 1807 } 1808 break; 1809 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: 1810 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1811 &dtv1000s_tda10048_config, 1812 &dev->i2c_adap); 1813 if (fe0->dvb.frontend != NULL) { 1814 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1815 &dev->i2c_adap, 0x4b, 1816 &tda829x_no_probe); 1817 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1818 0x60, &dev->i2c_adap, 1819 &dtv1000s_tda18271_config); 1820 } 1821 break; 1822 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: 1823 /* Switch to digital mode */ 1824 saa7134_tuner_callback(dev, 0, 1825 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); 1826 fe0->dvb.frontend = dvb_attach(mb86a20s_attach, 1827 &kworld_mb86a20s_config, 1828 &dev->i2c_adap); 1829 if (fe0->dvb.frontend != NULL) { 1830 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1831 &dev->i2c_adap, 0x4b, 1832 &tda829x_no_probe); 1833 fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; 1834 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1835 0x60, &dev->i2c_adap, 1836 &kworld_tda18271_config); 1837 } 1838 1839 /* mb86a20s need to use the I2C gateway */ 1840 break; 1841 case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: 1842 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, 1843 &prohdtv_pro2_lgs8g75_config, 1844 &dev->i2c_adap); 1845 if (fe0->dvb.frontend != NULL) { 1846 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1847 &dev->i2c_adap, 0x4b, 1848 &tda829x_no_probe); 1849 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1850 0x60, &dev->i2c_adap, 1851 &prohdtv_pro2_tda18271_config); 1852 } 1853 break; 1854 case SAA7134_BOARD_AVERMEDIA_A706: 1855 /* Enable all DVB-S devices now */ 1856 /* CE5039 DVB-S tuner SLEEP pin low */ 1857 saa7134_set_gpio(dev, 23, 0); 1858 /* CE6313 DVB-S demod SLEEP pin low */ 1859 saa7134_set_gpio(dev, 9, 0); 1860 /* CE6313 DVB-S demod RESET# pin high */ 1861 saa7134_set_gpio(dev, 25, 1); 1862 msleep(1); 1863 fe0->dvb.frontend = dvb_attach(mt312_attach, 1864 &zl10313_avermedia_a706_config, &dev->i2c_adap); 1865 if (fe0->dvb.frontend) { 1866 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; 1867 if (dvb_attach(zl10039_attach, fe0->dvb.frontend, 1868 0x60, &dev->i2c_adap) == NULL) 1869 pr_warn("%s: No zl10039 found!\n", 1870 __func__); 1871 } 1872 break; 1873 case SAA7134_BOARD_LEADTEK_WINFAST_HDTV200_H: 1874 fe0->dvb.frontend = dvb_attach(s5h1411_attach, 1875 &hdtv200h_s5h1411_config, 1876 &dev->i2c_adap); 1877 if (fe0->dvb.frontend) { 1878 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1879 &dev->i2c_adap, 0x4b, 1880 &tda829x_no_probe); 1881 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1882 0x60, &dev->i2c_adap, 1883 &hdtv200h_tda18271_config); 1884 } 1885 break; 1886 default: 1887 pr_warn("Huh? unknown DVB card?\n"); 1888 break; 1889 } 1890 1891 if (attach_xc3028) { 1892 struct dvb_frontend *fe; 1893 struct xc2028_config cfg = { 1894 .i2c_adap = &dev->i2c_adap, 1895 .i2c_addr = 0x61, 1896 }; 1897 1898 if (!fe0->dvb.frontend) 1899 goto detach_frontend; 1900 1901 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); 1902 if (!fe) { 1903 pr_err("%s/2: xc3028 attach failed\n", 1904 dev->name); 1905 goto detach_frontend; 1906 } 1907 } 1908 1909 if (NULL == fe0->dvb.frontend) { 1910 pr_err("%s/dvb: frontend initialization failed\n", dev->name); 1911 goto detach_frontend; 1912 } 1913 /* define general-purpose callback pointer */ 1914 fe0->dvb.frontend->callback = saa7134_tuner_callback; 1915 1916 /* register everything else */ 1917 #ifndef CONFIG_MEDIA_CONTROLLER_DVB 1918 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, 1919 &dev->pci->dev, NULL, 1920 adapter_nr, 0); 1921 #else 1922 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, 1923 &dev->pci->dev, dev->media_dev, 1924 adapter_nr, 0); 1925 #endif 1926 1927 /* this sequence is necessary to make the tda1004x load its firmware 1928 * and to enter analog mode of hybrid boards 1929 */ 1930 if (!ret) { 1931 if (fe0->dvb.frontend->ops.init) 1932 fe0->dvb.frontend->ops.init(fe0->dvb.frontend); 1933 if (fe0->dvb.frontend->ops.sleep) 1934 fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend); 1935 if (fe0->dvb.frontend->ops.tuner_ops.sleep) 1936 fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend); 1937 } 1938 return ret; 1939 1940 detach_frontend: 1941 vb2_dvb_dealloc_frontends(&dev->frontends); 1942 vb2_queue_release(&fe0->dvb.dvbq); 1943 return -EINVAL; 1944 } 1945 1946 static int dvb_fini(struct saa7134_dev *dev) 1947 { 1948 struct vb2_dvb_frontend *fe0; 1949 1950 /* Get the first frontend */ 1951 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1); 1952 if (!fe0) 1953 return -EINVAL; 1954 1955 /* FIXME: I suspect that this code is bogus, since the entry for 1956 Pinnacle 300I DVB-T PAL already defines the proper init to allow 1957 the detection of mt2032 (TDA9887_PORT2_INACTIVE) 1958 */ 1959 if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) { 1960 struct v4l2_priv_tun_config tda9887_cfg; 1961 static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; 1962 1963 tda9887_cfg.tuner = TUNER_TDA9887; 1964 tda9887_cfg.priv = &on; 1965 1966 /* otherwise we don't detect the tuner on next insmod */ 1967 saa_call_all(dev, tuner, s_config, &tda9887_cfg); 1968 } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { 1969 if ((dev->eedata[2] == 0x07) && use_frontend) { 1970 /* turn off the 2nd lnb supply */ 1971 u8 data = 0x80; 1972 struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; 1973 struct dvb_frontend *fe; 1974 fe = fe0->dvb.frontend; 1975 if (fe->ops.i2c_gate_ctrl) { 1976 fe->ops.i2c_gate_ctrl(fe, 1); 1977 i2c_transfer(&dev->i2c_adap, &msg, 1); 1978 fe->ops.i2c_gate_ctrl(fe, 0); 1979 } 1980 } 1981 } 1982 vb2_dvb_unregister_bus(&dev->frontends); 1983 vb2_queue_release(&fe0->dvb.dvbq); 1984 return 0; 1985 } 1986 1987 static struct saa7134_mpeg_ops dvb_ops = { 1988 .type = SAA7134_MPEG_DVB, 1989 .init = dvb_init, 1990 .fini = dvb_fini, 1991 }; 1992 1993 static int __init dvb_register(void) 1994 { 1995 return saa7134_ts_register(&dvb_ops); 1996 } 1997 1998 static void __exit dvb_unregister(void) 1999 { 2000 saa7134_ts_unregister(&dvb_ops); 2001 } 2002 2003 module_init(dvb_register); 2004 module_exit(dvb_unregister); 2005