1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 *
4 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
5 *
6 * Extended 3 / 2005 by Hartmut Hackmann to support various
7 * cards with the tda10046 DVB-T channel decoder
8 */
9
10 #include "saa7134.h"
11 #include "saa7134-reg.h"
12
13 #include <linux/init.h>
14 #include <linux/list.h>
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/delay.h>
18 #include <linux/kthread.h>
19 #include <linux/suspend.h>
20
21 #include <media/v4l2-common.h>
22 #include "dvb-pll.h"
23 #include <media/dvb_frontend.h>
24
25 #include "mt352.h"
26 #include "mt352_priv.h" /* FIXME */
27 #include "tda1004x.h"
28 #include "nxt200x.h"
29 #include "xc2028.h"
30 #include "xc5000.h"
31
32 #include "tda10086.h"
33 #include "tda826x.h"
34 #include "tda827x.h"
35 #include "isl6421.h"
36 #include "isl6405.h"
37 #include "lnbp21.h"
38 #include "tuner-simple.h"
39 #include "tda10048.h"
40 #include "tda18271.h"
41 #include "lgdt3305.h"
42 #include "tda8290.h"
43 #include "mb86a20s.h"
44 #include "lgs8gxx.h"
45
46 #include "zl10353.h"
47 #include "qt1010.h"
48
49 #include "zl10036.h"
50 #include "zl10039.h"
51 #include "mt312.h"
52 #include "s5h1411.h"
53
54 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
55 MODULE_DESCRIPTION("DVB/ATSC Support for saa7134 based TV cards");
56 MODULE_LICENSE("GPL");
57
58 static unsigned int antenna_pwr;
59
60 module_param(antenna_pwr, int, 0444);
61 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
62
63 static int use_frontend;
64 module_param(use_frontend, int, 0644);
65 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
66
67 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
68
69 /* ------------------------------------------------------------------
70 * mt352 based DVB-T cards
71 */
72
pinnacle_antenna_pwr(struct saa7134_dev * dev,int on)73 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
74 {
75 u32 ok;
76
77 if (!on) {
78 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
79 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
80 return 0;
81 }
82
83 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
84 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
85 udelay(10);
86
87 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
88 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
89 udelay(10);
90 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
91 udelay(10);
92 ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
93 pr_debug("%s %s\n", __func__, ok ? "on" : "off");
94
95 if (!ok)
96 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
97 return ok;
98 }
99
mt352_pinnacle_init(struct dvb_frontend * fe)100 static int mt352_pinnacle_init(struct dvb_frontend* fe)
101 {
102 static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
103 static u8 reset [] = { RESET, 0x80 };
104 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
105 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
106 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
107 static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
108 static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
109 static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
110 static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
111
112 pr_debug("%s called\n", __func__);
113
114 mt352_write(fe, clock_config, sizeof(clock_config));
115 udelay(200);
116 mt352_write(fe, reset, sizeof(reset));
117 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
118 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
119 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
120 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
121
122 mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
123 mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
124 mt352_write(fe, irq_cfg, sizeof(irq_cfg));
125
126 return 0;
127 }
128
mt352_aver777_init(struct dvb_frontend * fe)129 static int mt352_aver777_init(struct dvb_frontend* fe)
130 {
131 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
132 static u8 reset [] = { RESET, 0x80 };
133 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
134 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
135 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
136
137 mt352_write(fe, clock_config, sizeof(clock_config));
138 udelay(200);
139 mt352_write(fe, reset, sizeof(reset));
140 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
141 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
142 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
143
144 return 0;
145 }
146
mt352_avermedia_xc3028_init(struct dvb_frontend * fe)147 static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
148 {
149 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
150 static u8 reset [] = { RESET, 0x80 };
151 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
152 static u8 agc_cfg [] = { AGC_TARGET, 0xe };
153 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
154
155 mt352_write(fe, clock_config, sizeof(clock_config));
156 udelay(200);
157 mt352_write(fe, reset, sizeof(reset));
158 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
159 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
160 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
161 return 0;
162 }
163
mt352_pinnacle_tuner_set_params(struct dvb_frontend * fe)164 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe)
165 {
166 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
167 u8 off[] = { 0x00, 0xf1};
168 u8 on[] = { 0x00, 0x71};
169 struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
170
171 struct saa7134_dev *dev = fe->dvb->priv;
172 struct v4l2_frequency f;
173
174 /* set frequency (mt2050) */
175 f.tuner = 0;
176 f.type = V4L2_TUNER_DIGITAL_TV;
177 f.frequency = c->frequency / 1000 * 16 / 1000;
178 if (fe->ops.i2c_gate_ctrl)
179 fe->ops.i2c_gate_ctrl(fe, 1);
180 i2c_transfer(&dev->i2c_adap, &msg, 1);
181 saa_call_all(dev, tuner, s_frequency, &f);
182 msg.buf = on;
183 if (fe->ops.i2c_gate_ctrl)
184 fe->ops.i2c_gate_ctrl(fe, 1);
185 i2c_transfer(&dev->i2c_adap, &msg, 1);
186
187 pinnacle_antenna_pwr(dev, antenna_pwr);
188
189 /* mt352 setup */
190 return mt352_pinnacle_init(fe);
191 }
192
193 static struct mt352_config pinnacle_300i = {
194 .demod_address = 0x3c >> 1,
195 .adc_clock = 20333,
196 .if2 = 36150,
197 .no_tuner = 1,
198 .demod_init = mt352_pinnacle_init,
199 };
200
201 static struct mt352_config avermedia_777 = {
202 .demod_address = 0xf,
203 .demod_init = mt352_aver777_init,
204 };
205
206 static struct mt352_config avermedia_xc3028_mt352_dev = {
207 .demod_address = (0x1e >> 1),
208 .no_tuner = 1,
209 .demod_init = mt352_avermedia_xc3028_init,
210 };
211
212 static struct tda18271_std_map mb86a20s_tda18271_std_map = {
213 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
214 .if_lvl = 7, .rfagc_top = 0x37, },
215 };
216
217 static struct tda18271_config kworld_tda18271_config = {
218 .std_map = &mb86a20s_tda18271_std_map,
219 .gate = TDA18271_GATE_DIGITAL,
220 .config = 3, /* Use tuner callback for AGC */
221
222 };
223
224 static const struct mb86a20s_config kworld_mb86a20s_config = {
225 .demod_address = 0x10,
226 };
227
kworld_sbtvd_gate_ctrl(struct dvb_frontend * fe,int enable)228 static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable)
229 {
230 struct saa7134_dev *dev = fe->dvb->priv;
231
232 unsigned char initmsg[] = {0x45, 0x97};
233 unsigned char msg_enable[] = {0x45, 0xc1};
234 unsigned char msg_disable[] = {0x45, 0x81};
235 struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2};
236
237 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
238 pr_warn("could not access the I2C gate\n");
239 return -EIO;
240 }
241 if (enable)
242 msg.buf = msg_enable;
243 else
244 msg.buf = msg_disable;
245 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
246 pr_warn("could not access the I2C gate\n");
247 return -EIO;
248 }
249 msleep(20);
250 return 0;
251 }
252
253 /* ==================================================================
254 * tda1004x based DVB-T cards, helper functions
255 */
256
philips_tda1004x_request_firmware(struct dvb_frontend * fe,const struct firmware ** fw,char * name)257 static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
258 const struct firmware **fw, char *name)
259 {
260 struct saa7134_dev *dev = fe->dvb->priv;
261 return request_firmware(fw, name, &dev->pci->dev);
262 }
263
264 /* ------------------------------------------------------------------
265 * these tuners are tu1216, td1316(a)
266 */
267
philips_tda6651_pll_set(struct dvb_frontend * fe)268 static int philips_tda6651_pll_set(struct dvb_frontend *fe)
269 {
270 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
271 struct saa7134_dev *dev = fe->dvb->priv;
272 struct tda1004x_state *state = fe->demodulator_priv;
273 u8 addr = state->config->tuner_address;
274 u8 tuner_buf[4];
275 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
276 sizeof(tuner_buf) };
277 int tuner_frequency = 0;
278 u8 band, cp, filter;
279
280 /* determine charge pump */
281 tuner_frequency = c->frequency + 36166000;
282 if (tuner_frequency < 87000000)
283 return -EINVAL;
284 else if (tuner_frequency < 130000000)
285 cp = 3;
286 else if (tuner_frequency < 160000000)
287 cp = 5;
288 else if (tuner_frequency < 200000000)
289 cp = 6;
290 else if (tuner_frequency < 290000000)
291 cp = 3;
292 else if (tuner_frequency < 420000000)
293 cp = 5;
294 else if (tuner_frequency < 480000000)
295 cp = 6;
296 else if (tuner_frequency < 620000000)
297 cp = 3;
298 else if (tuner_frequency < 830000000)
299 cp = 5;
300 else if (tuner_frequency < 895000000)
301 cp = 7;
302 else
303 return -EINVAL;
304
305 /* determine band */
306 if (c->frequency < 49000000)
307 return -EINVAL;
308 else if (c->frequency < 161000000)
309 band = 1;
310 else if (c->frequency < 444000000)
311 band = 2;
312 else if (c->frequency < 861000000)
313 band = 4;
314 else
315 return -EINVAL;
316
317 /* setup PLL filter */
318 switch (c->bandwidth_hz) {
319 case 6000000:
320 filter = 0;
321 break;
322
323 case 7000000:
324 filter = 0;
325 break;
326
327 case 8000000:
328 filter = 1;
329 break;
330
331 default:
332 return -EINVAL;
333 }
334
335 /* calculate divisor
336 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
337 */
338 tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
339
340 /* setup tuner buffer */
341 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
342 tuner_buf[1] = tuner_frequency & 0xff;
343 tuner_buf[2] = 0xca;
344 tuner_buf[3] = (cp << 5) | (filter << 3) | band;
345
346 if (fe->ops.i2c_gate_ctrl)
347 fe->ops.i2c_gate_ctrl(fe, 1);
348 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
349 pr_warn("could not write to tuner at addr: 0x%02x\n",
350 addr << 1);
351 return -EIO;
352 }
353 msleep(1);
354 return 0;
355 }
356
philips_tu1216_init(struct dvb_frontend * fe)357 static int philips_tu1216_init(struct dvb_frontend *fe)
358 {
359 struct saa7134_dev *dev = fe->dvb->priv;
360 struct tda1004x_state *state = fe->demodulator_priv;
361 u8 addr = state->config->tuner_address;
362 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
363 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
364
365 /* setup PLL configuration */
366 if (fe->ops.i2c_gate_ctrl)
367 fe->ops.i2c_gate_ctrl(fe, 1);
368 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
369 return -EIO;
370 msleep(1);
371
372 return 0;
373 }
374
375 /* ------------------------------------------------------------------ */
376
377 static struct tda1004x_config philips_tu1216_60_config = {
378 .demod_address = 0x8,
379 .invert = 1,
380 .invert_oclk = 0,
381 .xtal_freq = TDA10046_XTAL_4M,
382 .agc_config = TDA10046_AGC_DEFAULT,
383 .if_freq = TDA10046_FREQ_3617,
384 .tuner_address = 0x60,
385 .request_firmware = philips_tda1004x_request_firmware
386 };
387
388 static struct tda1004x_config philips_tu1216_61_config = {
389
390 .demod_address = 0x8,
391 .invert = 1,
392 .invert_oclk = 0,
393 .xtal_freq = TDA10046_XTAL_4M,
394 .agc_config = TDA10046_AGC_DEFAULT,
395 .if_freq = TDA10046_FREQ_3617,
396 .tuner_address = 0x61,
397 .request_firmware = philips_tda1004x_request_firmware
398 };
399
400 /* ------------------------------------------------------------------ */
401
philips_td1316_tuner_init(struct dvb_frontend * fe)402 static int philips_td1316_tuner_init(struct dvb_frontend *fe)
403 {
404 struct saa7134_dev *dev = fe->dvb->priv;
405 struct tda1004x_state *state = fe->demodulator_priv;
406 u8 addr = state->config->tuner_address;
407 static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
408 struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
409
410 /* setup PLL configuration */
411 if (fe->ops.i2c_gate_ctrl)
412 fe->ops.i2c_gate_ctrl(fe, 1);
413 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
414 return -EIO;
415 return 0;
416 }
417
philips_td1316_tuner_set_params(struct dvb_frontend * fe)418 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe)
419 {
420 return philips_tda6651_pll_set(fe);
421 }
422
philips_td1316_tuner_sleep(struct dvb_frontend * fe)423 static int philips_td1316_tuner_sleep(struct dvb_frontend *fe)
424 {
425 struct saa7134_dev *dev = fe->dvb->priv;
426 struct tda1004x_state *state = fe->demodulator_priv;
427 u8 addr = state->config->tuner_address;
428 static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
429 struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
430
431 /* switch the tuner to analog mode */
432 if (fe->ops.i2c_gate_ctrl)
433 fe->ops.i2c_gate_ctrl(fe, 1);
434 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
435 return -EIO;
436 return 0;
437 }
438
439 /* ------------------------------------------------------------------ */
440
philips_europa_tuner_init(struct dvb_frontend * fe)441 static int philips_europa_tuner_init(struct dvb_frontend *fe)
442 {
443 struct saa7134_dev *dev = fe->dvb->priv;
444 static u8 msg[] = { 0x00, 0x40};
445 struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
446
447
448 if (philips_td1316_tuner_init(fe))
449 return -EIO;
450 msleep(1);
451 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
452 return -EIO;
453
454 return 0;
455 }
456
philips_europa_tuner_sleep(struct dvb_frontend * fe)457 static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
458 {
459 struct saa7134_dev *dev = fe->dvb->priv;
460
461 static u8 msg[] = { 0x00, 0x14 };
462 struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
463
464 if (philips_td1316_tuner_sleep(fe))
465 return -EIO;
466
467 /* switch the board to analog mode */
468 if (fe->ops.i2c_gate_ctrl)
469 fe->ops.i2c_gate_ctrl(fe, 1);
470 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
471 return -EIO;
472
473 return 0;
474 }
475
philips_europa_demod_sleep(struct dvb_frontend * fe)476 static int philips_europa_demod_sleep(struct dvb_frontend *fe)
477 {
478 struct saa7134_dev *dev = fe->dvb->priv;
479
480 if (dev->original_demod_sleep)
481 dev->original_demod_sleep(fe);
482 fe->ops.i2c_gate_ctrl(fe, 1);
483 return 0;
484 }
485
486 static struct tda1004x_config philips_europa_config = {
487
488 .demod_address = 0x8,
489 .invert = 0,
490 .invert_oclk = 0,
491 .xtal_freq = TDA10046_XTAL_4M,
492 .agc_config = TDA10046_AGC_IFO_AUTO_POS,
493 .if_freq = TDA10046_FREQ_052,
494 .tuner_address = 0x61,
495 .request_firmware = philips_tda1004x_request_firmware
496 };
497
498 static struct tda1004x_config medion_cardbus = {
499 .demod_address = 0x08,
500 .invert = 1,
501 .invert_oclk = 0,
502 .xtal_freq = TDA10046_XTAL_16M,
503 .agc_config = TDA10046_AGC_IFO_AUTO_NEG,
504 .if_freq = TDA10046_FREQ_3613,
505 .tuner_address = 0x61,
506 .request_firmware = philips_tda1004x_request_firmware
507 };
508
509 static struct tda1004x_config technotrend_budget_t3000_config = {
510 .demod_address = 0x8,
511 .invert = 1,
512 .invert_oclk = 0,
513 .xtal_freq = TDA10046_XTAL_4M,
514 .agc_config = TDA10046_AGC_DEFAULT,
515 .if_freq = TDA10046_FREQ_3617,
516 .tuner_address = 0x63,
517 .request_firmware = philips_tda1004x_request_firmware
518 };
519
520 /* ------------------------------------------------------------------
521 * tda 1004x based cards with philips silicon tuner
522 */
523
tda8290_i2c_gate_ctrl(struct dvb_frontend * fe,int enable)524 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
525 {
526 struct tda1004x_state *state = fe->demodulator_priv;
527
528 u8 addr = state->config->i2c_gate;
529 static u8 tda8290_close[] = { 0x21, 0xc0};
530 static u8 tda8290_open[] = { 0x21, 0x80};
531 struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2};
532 if (enable) {
533 tda8290_msg.buf = tda8290_close;
534 } else {
535 tda8290_msg.buf = tda8290_open;
536 }
537 if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) {
538 pr_warn("could not access tda8290 I2C gate\n");
539 return -EIO;
540 }
541 msleep(20);
542 return 0;
543 }
544
philips_tda827x_tuner_init(struct dvb_frontend * fe)545 static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
546 {
547 struct saa7134_dev *dev = fe->dvb->priv;
548 struct tda1004x_state *state = fe->demodulator_priv;
549
550 switch (state->config->antenna_switch) {
551 case 0:
552 break;
553 case 1:
554 pr_debug("setting GPIO21 to 0 (TV antenna?)\n");
555 saa7134_set_gpio(dev, 21, 0);
556 break;
557 case 2:
558 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n");
559 saa7134_set_gpio(dev, 21, 1);
560 break;
561 }
562 return 0;
563 }
564
philips_tda827x_tuner_sleep(struct dvb_frontend * fe)565 static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
566 {
567 struct saa7134_dev *dev = fe->dvb->priv;
568 struct tda1004x_state *state = fe->demodulator_priv;
569
570 switch (state->config->antenna_switch) {
571 case 0:
572 break;
573 case 1:
574 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n");
575 saa7134_set_gpio(dev, 21, 1);
576 break;
577 case 2:
578 pr_debug("setting GPIO21 to 0 (TV antenna?)\n");
579 saa7134_set_gpio(dev, 21, 0);
580 break;
581 }
582 return 0;
583 }
584
configure_tda827x_fe(struct saa7134_dev * dev,struct tda1004x_config * cdec_conf,struct tda827x_config * tuner_conf)585 static int configure_tda827x_fe(struct saa7134_dev *dev,
586 struct tda1004x_config *cdec_conf,
587 struct tda827x_config *tuner_conf)
588 {
589 struct vb2_dvb_frontend *fe0;
590
591 /* Get the first frontend */
592 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
593
594 if (!fe0)
595 return -EINVAL;
596
597 fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
598 if (fe0->dvb.frontend) {
599 if (cdec_conf->i2c_gate)
600 fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
601 if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
602 cdec_conf->tuner_address,
603 &dev->i2c_adap, tuner_conf))
604 return 0;
605
606 pr_warn("no tda827x tuner found at addr: %02x\n",
607 cdec_conf->tuner_address);
608 }
609 return -EINVAL;
610 }
611
612 /* ------------------------------------------------------------------ */
613
614 static struct tda827x_config tda827x_cfg_0 = {
615 .init = philips_tda827x_tuner_init,
616 .sleep = philips_tda827x_tuner_sleep,
617 .config = 0,
618 .switch_addr = 0
619 };
620
621 static struct tda827x_config tda827x_cfg_1 = {
622 .init = philips_tda827x_tuner_init,
623 .sleep = philips_tda827x_tuner_sleep,
624 .config = 1,
625 .switch_addr = 0x4b
626 };
627
628 static struct tda827x_config tda827x_cfg_2 = {
629 .init = philips_tda827x_tuner_init,
630 .sleep = philips_tda827x_tuner_sleep,
631 .config = 2,
632 .switch_addr = 0x4b
633 };
634
635 static struct tda827x_config tda827x_cfg_2_sw42 = {
636 .init = philips_tda827x_tuner_init,
637 .sleep = philips_tda827x_tuner_sleep,
638 .config = 2,
639 .switch_addr = 0x42
640 };
641
642 /* ------------------------------------------------------------------ */
643
644 static struct tda1004x_config tda827x_lifeview_config = {
645 .demod_address = 0x08,
646 .invert = 1,
647 .invert_oclk = 0,
648 .xtal_freq = TDA10046_XTAL_16M,
649 .agc_config = TDA10046_AGC_TDA827X,
650 .gpio_config = TDA10046_GP11_I,
651 .if_freq = TDA10046_FREQ_045,
652 .tuner_address = 0x60,
653 .request_firmware = philips_tda1004x_request_firmware
654 };
655
656 static struct tda1004x_config philips_tiger_config = {
657 .demod_address = 0x08,
658 .invert = 1,
659 .invert_oclk = 0,
660 .xtal_freq = TDA10046_XTAL_16M,
661 .agc_config = TDA10046_AGC_TDA827X,
662 .gpio_config = TDA10046_GP11_I,
663 .if_freq = TDA10046_FREQ_045,
664 .i2c_gate = 0x4b,
665 .tuner_address = 0x61,
666 .antenna_switch= 1,
667 .request_firmware = philips_tda1004x_request_firmware
668 };
669
670 static struct tda1004x_config cinergy_ht_config = {
671 .demod_address = 0x08,
672 .invert = 1,
673 .invert_oclk = 0,
674 .xtal_freq = TDA10046_XTAL_16M,
675 .agc_config = TDA10046_AGC_TDA827X,
676 .gpio_config = TDA10046_GP01_I,
677 .if_freq = TDA10046_FREQ_045,
678 .i2c_gate = 0x4b,
679 .tuner_address = 0x61,
680 .request_firmware = philips_tda1004x_request_firmware
681 };
682
683 static struct tda1004x_config cinergy_ht_pci_config = {
684 .demod_address = 0x08,
685 .invert = 1,
686 .invert_oclk = 0,
687 .xtal_freq = TDA10046_XTAL_16M,
688 .agc_config = TDA10046_AGC_TDA827X,
689 .gpio_config = TDA10046_GP01_I,
690 .if_freq = TDA10046_FREQ_045,
691 .i2c_gate = 0x4b,
692 .tuner_address = 0x60,
693 .request_firmware = philips_tda1004x_request_firmware
694 };
695
696 static struct tda1004x_config philips_tiger_s_config = {
697 .demod_address = 0x08,
698 .invert = 1,
699 .invert_oclk = 0,
700 .xtal_freq = TDA10046_XTAL_16M,
701 .agc_config = TDA10046_AGC_TDA827X,
702 .gpio_config = TDA10046_GP01_I,
703 .if_freq = TDA10046_FREQ_045,
704 .i2c_gate = 0x4b,
705 .tuner_address = 0x61,
706 .antenna_switch= 1,
707 .request_firmware = philips_tda1004x_request_firmware
708 };
709
710 static struct tda1004x_config pinnacle_pctv_310i_config = {
711 .demod_address = 0x08,
712 .invert = 1,
713 .invert_oclk = 0,
714 .xtal_freq = TDA10046_XTAL_16M,
715 .agc_config = TDA10046_AGC_TDA827X,
716 .gpio_config = TDA10046_GP11_I,
717 .if_freq = TDA10046_FREQ_045,
718 .i2c_gate = 0x4b,
719 .tuner_address = 0x61,
720 .request_firmware = philips_tda1004x_request_firmware
721 };
722
723 static struct tda1004x_config hauppauge_hvr_1110_config = {
724 .demod_address = 0x08,
725 .invert = 1,
726 .invert_oclk = 0,
727 .xtal_freq = TDA10046_XTAL_16M,
728 .agc_config = TDA10046_AGC_TDA827X,
729 .gpio_config = TDA10046_GP11_I,
730 .if_freq = TDA10046_FREQ_045,
731 .i2c_gate = 0x4b,
732 .tuner_address = 0x61,
733 .request_firmware = philips_tda1004x_request_firmware
734 };
735
736 static struct tda1004x_config asus_p7131_dual_config = {
737 .demod_address = 0x08,
738 .invert = 1,
739 .invert_oclk = 0,
740 .xtal_freq = TDA10046_XTAL_16M,
741 .agc_config = TDA10046_AGC_TDA827X,
742 .gpio_config = TDA10046_GP11_I,
743 .if_freq = TDA10046_FREQ_045,
744 .i2c_gate = 0x4b,
745 .tuner_address = 0x61,
746 .antenna_switch= 2,
747 .request_firmware = philips_tda1004x_request_firmware
748 };
749
750 static struct tda1004x_config lifeview_trio_config = {
751 .demod_address = 0x09,
752 .invert = 1,
753 .invert_oclk = 0,
754 .xtal_freq = TDA10046_XTAL_16M,
755 .agc_config = TDA10046_AGC_TDA827X,
756 .gpio_config = TDA10046_GP00_I,
757 .if_freq = TDA10046_FREQ_045,
758 .tuner_address = 0x60,
759 .request_firmware = philips_tda1004x_request_firmware
760 };
761
762 static struct tda1004x_config tevion_dvbt220rf_config = {
763 .demod_address = 0x08,
764 .invert = 1,
765 .invert_oclk = 0,
766 .xtal_freq = TDA10046_XTAL_16M,
767 .agc_config = TDA10046_AGC_TDA827X,
768 .gpio_config = TDA10046_GP11_I,
769 .if_freq = TDA10046_FREQ_045,
770 .tuner_address = 0x60,
771 .request_firmware = philips_tda1004x_request_firmware
772 };
773
774 static struct tda1004x_config md8800_dvbt_config = {
775 .demod_address = 0x08,
776 .invert = 1,
777 .invert_oclk = 0,
778 .xtal_freq = TDA10046_XTAL_16M,
779 .agc_config = TDA10046_AGC_TDA827X,
780 .gpio_config = TDA10046_GP01_I,
781 .if_freq = TDA10046_FREQ_045,
782 .i2c_gate = 0x4b,
783 .tuner_address = 0x60,
784 .request_firmware = philips_tda1004x_request_firmware
785 };
786
787 static struct tda1004x_config asus_p7131_4871_config = {
788 .demod_address = 0x08,
789 .invert = 1,
790 .invert_oclk = 0,
791 .xtal_freq = TDA10046_XTAL_16M,
792 .agc_config = TDA10046_AGC_TDA827X,
793 .gpio_config = TDA10046_GP01_I,
794 .if_freq = TDA10046_FREQ_045,
795 .i2c_gate = 0x4b,
796 .tuner_address = 0x61,
797 .antenna_switch= 2,
798 .request_firmware = philips_tda1004x_request_firmware
799 };
800
801 static struct tda1004x_config asus_p7131_hybrid_lna_config = {
802 .demod_address = 0x08,
803 .invert = 1,
804 .invert_oclk = 0,
805 .xtal_freq = TDA10046_XTAL_16M,
806 .agc_config = TDA10046_AGC_TDA827X,
807 .gpio_config = TDA10046_GP11_I,
808 .if_freq = TDA10046_FREQ_045,
809 .i2c_gate = 0x4b,
810 .tuner_address = 0x61,
811 .antenna_switch= 2,
812 .request_firmware = philips_tda1004x_request_firmware
813 };
814
815 static struct tda1004x_config kworld_dvb_t_210_config = {
816 .demod_address = 0x08,
817 .invert = 1,
818 .invert_oclk = 0,
819 .xtal_freq = TDA10046_XTAL_16M,
820 .agc_config = TDA10046_AGC_TDA827X,
821 .gpio_config = TDA10046_GP11_I,
822 .if_freq = TDA10046_FREQ_045,
823 .i2c_gate = 0x4b,
824 .tuner_address = 0x61,
825 .antenna_switch= 1,
826 .request_firmware = philips_tda1004x_request_firmware
827 };
828
829 static struct tda1004x_config avermedia_super_007_config = {
830 .demod_address = 0x08,
831 .invert = 1,
832 .invert_oclk = 0,
833 .xtal_freq = TDA10046_XTAL_16M,
834 .agc_config = TDA10046_AGC_TDA827X,
835 .gpio_config = TDA10046_GP01_I,
836 .if_freq = TDA10046_FREQ_045,
837 .i2c_gate = 0x4b,
838 .tuner_address = 0x60,
839 .antenna_switch= 1,
840 .request_firmware = philips_tda1004x_request_firmware
841 };
842
843 static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
844 .demod_address = 0x08,
845 .invert = 1,
846 .invert_oclk = 0,
847 .xtal_freq = TDA10046_XTAL_16M,
848 .agc_config = TDA10046_AGC_TDA827X,
849 .gpio_config = TDA10046_GP01_I,
850 .if_freq = TDA10046_FREQ_045,
851 .i2c_gate = 0x42,
852 .tuner_address = 0x61,
853 .antenna_switch = 1,
854 .request_firmware = philips_tda1004x_request_firmware
855 };
856
857 static struct tda1004x_config asus_tiger_3in1_config = {
858 .demod_address = 0x0b,
859 .invert = 1,
860 .invert_oclk = 0,
861 .xtal_freq = TDA10046_XTAL_16M,
862 .agc_config = TDA10046_AGC_TDA827X,
863 .gpio_config = TDA10046_GP11_I,
864 .if_freq = TDA10046_FREQ_045,
865 .i2c_gate = 0x4b,
866 .tuner_address = 0x61,
867 .antenna_switch = 1,
868 .request_firmware = philips_tda1004x_request_firmware
869 };
870
871 static struct tda1004x_config asus_ps3_100_config = {
872 .demod_address = 0x0b,
873 .invert = 1,
874 .invert_oclk = 0,
875 .xtal_freq = TDA10046_XTAL_16M,
876 .agc_config = TDA10046_AGC_TDA827X,
877 .gpio_config = TDA10046_GP11_I,
878 .if_freq = TDA10046_FREQ_045,
879 .i2c_gate = 0x4b,
880 .tuner_address = 0x61,
881 .antenna_switch = 1,
882 .request_firmware = philips_tda1004x_request_firmware
883 };
884
885 /* ------------------------------------------------------------------
886 * special case: this card uses saa713x GPIO22 for the mode switch
887 */
888
ads_duo_tuner_init(struct dvb_frontend * fe)889 static int ads_duo_tuner_init(struct dvb_frontend *fe)
890 {
891 struct saa7134_dev *dev = fe->dvb->priv;
892 philips_tda827x_tuner_init(fe);
893 /* route TDA8275a AGC input to the channel decoder */
894 saa7134_set_gpio(dev, 22, 1);
895 return 0;
896 }
897
ads_duo_tuner_sleep(struct dvb_frontend * fe)898 static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
899 {
900 struct saa7134_dev *dev = fe->dvb->priv;
901 /* route TDA8275a AGC input to the analog IF chip*/
902 saa7134_set_gpio(dev, 22, 0);
903 philips_tda827x_tuner_sleep(fe);
904 return 0;
905 }
906
907 static struct tda827x_config ads_duo_cfg = {
908 .init = ads_duo_tuner_init,
909 .sleep = ads_duo_tuner_sleep,
910 .config = 0
911 };
912
913 static struct tda1004x_config ads_tech_duo_config = {
914 .demod_address = 0x08,
915 .invert = 1,
916 .invert_oclk = 0,
917 .xtal_freq = TDA10046_XTAL_16M,
918 .agc_config = TDA10046_AGC_TDA827X,
919 .gpio_config = TDA10046_GP00_I,
920 .if_freq = TDA10046_FREQ_045,
921 .tuner_address = 0x61,
922 .request_firmware = philips_tda1004x_request_firmware
923 };
924
925 static struct zl10353_config behold_h6_config = {
926 .demod_address = 0x1e>>1,
927 .no_tuner = 1,
928 .parallel_ts = 1,
929 .disable_i2c_gate_ctrl = 1,
930 };
931
932 static struct xc5000_config behold_x7_tunerconfig = {
933 .i2c_address = 0xc2>>1,
934 .if_khz = 4560,
935 .radio_input = XC5000_RADIO_FM1,
936 };
937
938 static struct zl10353_config behold_x7_config = {
939 .demod_address = 0x1e>>1,
940 .if2 = 45600,
941 .no_tuner = 1,
942 .parallel_ts = 1,
943 .disable_i2c_gate_ctrl = 1,
944 };
945
946 static struct zl10353_config videomate_t750_zl10353_config = {
947 .demod_address = 0x0f,
948 .no_tuner = 1,
949 .parallel_ts = 1,
950 .disable_i2c_gate_ctrl = 1,
951 };
952
953 static struct qt1010_config videomate_t750_qt1010_config = {
954 .i2c_address = 0x62
955 };
956
957
958 /* ==================================================================
959 * tda10086 based DVB-S cards, helper functions
960 */
961
962 static struct tda10086_config flydvbs = {
963 .demod_address = 0x0e,
964 .invert = 0,
965 .diseqc_tone = 0,
966 .xtal_freq = TDA10086_XTAL_16M,
967 };
968
969 static struct tda10086_config sd1878_4m = {
970 .demod_address = 0x0e,
971 .invert = 0,
972 .diseqc_tone = 0,
973 .xtal_freq = TDA10086_XTAL_4M,
974 };
975
976 /* ------------------------------------------------------------------
977 * special case: lnb supply is connected to the gated i2c
978 */
979
md8800_set_voltage(struct dvb_frontend * fe,enum fe_sec_voltage voltage)980 static int md8800_set_voltage(struct dvb_frontend *fe,
981 enum fe_sec_voltage voltage)
982 {
983 int res = -EIO;
984 struct saa7134_dev *dev = fe->dvb->priv;
985 if (fe->ops.i2c_gate_ctrl) {
986 fe->ops.i2c_gate_ctrl(fe, 1);
987 if (dev->original_set_voltage)
988 res = dev->original_set_voltage(fe, voltage);
989 fe->ops.i2c_gate_ctrl(fe, 0);
990 }
991 return res;
992 };
993
md8800_set_high_voltage(struct dvb_frontend * fe,long arg)994 static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg)
995 {
996 int res = -EIO;
997 struct saa7134_dev *dev = fe->dvb->priv;
998 if (fe->ops.i2c_gate_ctrl) {
999 fe->ops.i2c_gate_ctrl(fe, 1);
1000 if (dev->original_set_high_voltage)
1001 res = dev->original_set_high_voltage(fe, arg);
1002 fe->ops.i2c_gate_ctrl(fe, 0);
1003 }
1004 return res;
1005 };
1006
md8800_set_voltage2(struct dvb_frontend * fe,enum fe_sec_voltage voltage)1007 static int md8800_set_voltage2(struct dvb_frontend *fe,
1008 enum fe_sec_voltage voltage)
1009 {
1010 struct saa7134_dev *dev = fe->dvb->priv;
1011 u8 wbuf[2] = { 0x1f, 00 };
1012 u8 rbuf;
1013 struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 },
1014 { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } };
1015
1016 if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2)
1017 return -EIO;
1018 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
1019 if (voltage == SEC_VOLTAGE_18)
1020 wbuf[1] = rbuf | 0x10;
1021 else
1022 wbuf[1] = rbuf & 0xef;
1023 msg[0].len = 2;
1024 if (i2c_transfer(&dev->i2c_adap, msg, 1) != 1)
1025 return -EIO;
1026
1027 return 0;
1028 }
1029
md8800_set_high_voltage2(struct dvb_frontend * fe,long arg)1030 static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg)
1031 {
1032 pr_warn("%s: sorry can't set high LNB supply voltage from here\n",
1033 __func__);
1034 return -EIO;
1035 }
1036
1037 /* ==================================================================
1038 * nxt200x based ATSC cards, helper functions
1039 */
1040
1041 static const struct nxt200x_config avertvhda180 = {
1042 .demod_address = 0x0a,
1043 };
1044
1045 static const struct nxt200x_config kworldatsc110 = {
1046 .demod_address = 0x0a,
1047 };
1048
1049 /* ------------------------------------------------------------------ */
1050
1051 static struct mt312_config avertv_a700_mt312 = {
1052 .demod_address = 0x0e,
1053 .voltage_inverted = 1,
1054 };
1055
1056 static struct zl10036_config avertv_a700_tuner = {
1057 .tuner_address = 0x60,
1058 };
1059
1060 static struct mt312_config zl10313_compro_s350_config = {
1061 .demod_address = 0x0e,
1062 };
1063
1064 static struct mt312_config zl10313_avermedia_a706_config = {
1065 .demod_address = 0x0e,
1066 };
1067
1068 static struct lgdt3305_config hcw_lgdt3305_config = {
1069 .i2c_addr = 0x0e,
1070 .mpeg_mode = LGDT3305_MPEG_SERIAL,
1071 .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
1072 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
1073 .deny_i2c_rptr = 1,
1074 .spectral_inversion = 1,
1075 .qam_if_khz = 4000,
1076 .vsb_if_khz = 3250,
1077 };
1078
1079 static struct tda10048_config hcw_tda10048_config = {
1080 .demod_address = 0x10 >> 1,
1081 .output_mode = TDA10048_SERIAL_OUTPUT,
1082 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1083 .inversion = TDA10048_INVERSION_ON,
1084 .dtv6_if_freq_khz = TDA10048_IF_3300,
1085 .dtv7_if_freq_khz = TDA10048_IF_3500,
1086 .dtv8_if_freq_khz = TDA10048_IF_4000,
1087 .clk_freq_khz = TDA10048_CLK_16000,
1088 .disable_gate_access = 1,
1089 };
1090
1091 static struct tda18271_std_map hauppauge_tda18271_std_map = {
1092 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
1093 .if_lvl = 1, .rfagc_top = 0x58, },
1094 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
1095 .if_lvl = 1, .rfagc_top = 0x58, },
1096 };
1097
1098 static struct tda18271_config hcw_tda18271_config = {
1099 .std_map = &hauppauge_tda18271_std_map,
1100 .gate = TDA18271_GATE_ANALOG,
1101 .config = 3,
1102 .output_opt = TDA18271_OUTPUT_LT_OFF,
1103 };
1104
1105 static struct tda829x_config tda829x_no_probe = {
1106 .probe_tuner = TDA829X_DONT_PROBE,
1107 };
1108
1109 static struct tda10048_config zolid_tda10048_config = {
1110 .demod_address = 0x10 >> 1,
1111 .output_mode = TDA10048_PARALLEL_OUTPUT,
1112 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1113 .inversion = TDA10048_INVERSION_ON,
1114 .dtv6_if_freq_khz = TDA10048_IF_3300,
1115 .dtv7_if_freq_khz = TDA10048_IF_3500,
1116 .dtv8_if_freq_khz = TDA10048_IF_4000,
1117 .clk_freq_khz = TDA10048_CLK_16000,
1118 .disable_gate_access = 1,
1119 };
1120
1121 static struct tda18271_config zolid_tda18271_config = {
1122 .gate = TDA18271_GATE_ANALOG,
1123 };
1124
1125 static struct tda10048_config dtv1000s_tda10048_config = {
1126 .demod_address = 0x10 >> 1,
1127 .output_mode = TDA10048_PARALLEL_OUTPUT,
1128 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1129 .inversion = TDA10048_INVERSION_ON,
1130 .dtv6_if_freq_khz = TDA10048_IF_3300,
1131 .dtv7_if_freq_khz = TDA10048_IF_3800,
1132 .dtv8_if_freq_khz = TDA10048_IF_4300,
1133 .clk_freq_khz = TDA10048_CLK_16000,
1134 .disable_gate_access = 1,
1135 };
1136
1137 static struct tda18271_std_map dtv1000s_tda18271_std_map = {
1138 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
1139 .if_lvl = 1, .rfagc_top = 0x37, },
1140 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
1141 .if_lvl = 1, .rfagc_top = 0x37, },
1142 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
1143 .if_lvl = 1, .rfagc_top = 0x37, },
1144 };
1145
1146 static struct tda18271_config dtv1000s_tda18271_config = {
1147 .std_map = &dtv1000s_tda18271_std_map,
1148 .gate = TDA18271_GATE_ANALOG,
1149 };
1150
1151 static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = {
1152 .prod = LGS8GXX_PROD_LGS8G75,
1153 .demod_address = 0x1d,
1154 .serial_ts = 0,
1155 .ts_clk_pol = 1,
1156 .ts_clk_gated = 0,
1157 .if_clk_freq = 30400, /* 30.4 MHz */
1158 .if_freq = 4000, /* 4.00 MHz */
1159 .if_neg_center = 0,
1160 .ext_adc = 0,
1161 .adc_signed = 1,
1162 .adc_vpp = 3, /* 2.0 Vpp */
1163 .if_neg_edge = 1,
1164 };
1165
1166 static struct tda18271_config prohdtv_pro2_tda18271_config = {
1167 .gate = TDA18271_GATE_ANALOG,
1168 .output_opt = TDA18271_OUTPUT_LT_OFF,
1169 };
1170
1171 static struct tda18271_std_map kworld_tda18271_std_map = {
1172 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3,
1173 .if_lvl = 6, .rfagc_top = 0x37 },
1174 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
1175 .if_lvl = 6, .rfagc_top = 0x37 },
1176 };
1177
1178 static struct tda18271_config kworld_pc150u_tda18271_config = {
1179 .std_map = &kworld_tda18271_std_map,
1180 .gate = TDA18271_GATE_ANALOG,
1181 .output_opt = TDA18271_OUTPUT_LT_OFF,
1182 .config = 3, /* Use tuner callback for AGC */
1183 .rf_cal_on_startup = 1
1184 };
1185
1186 static struct s5h1411_config kworld_s5h1411_config = {
1187 .output_mode = S5H1411_PARALLEL_OUTPUT,
1188 .gpio = S5H1411_GPIO_OFF,
1189 .qam_if = S5H1411_IF_4000,
1190 .vsb_if = S5H1411_IF_3250,
1191 .inversion = S5H1411_INVERSION_ON,
1192 .status_mode = S5H1411_DEMODLOCKING,
1193 .mpeg_timing =
1194 S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
1195 };
1196
1197 static struct tda18271_config hdtv200h_tda18271_config = {
1198 .gate = TDA18271_GATE_ANALOG,
1199 .config = 3 /* Use tuner callback for AGC */
1200 };
1201
1202 static struct s5h1411_config hdtv200h_s5h1411_config = {
1203 .output_mode = S5H1411_PARALLEL_OUTPUT,
1204 .gpio = S5H1411_GPIO_OFF,
1205 .qam_if = S5H1411_IF_4000,
1206 .vsb_if = S5H1411_IF_3250,
1207 .inversion = S5H1411_INVERSION_ON,
1208 .status_mode = S5H1411_DEMODLOCKING,
1209 .mpeg_timing =
1210 S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
1211 };
1212
1213
1214 /* ==================================================================
1215 * Core code
1216 */
1217
dvb_init(struct saa7134_dev * dev)1218 static int dvb_init(struct saa7134_dev *dev)
1219 {
1220 int ret;
1221 int attach_xc3028 = 0;
1222 struct vb2_dvb_frontend *fe0;
1223 struct vb2_queue *q;
1224
1225 /* FIXME: add support for multi-frontend */
1226 mutex_init(&dev->frontends.lock);
1227 INIT_LIST_HEAD(&dev->frontends.felist);
1228
1229 pr_info("%s() allocating 1 frontend\n", __func__);
1230 fe0 = vb2_dvb_alloc_frontend(&dev->frontends, 1);
1231 if (!fe0) {
1232 pr_err("%s() failed to alloc\n", __func__);
1233 return -ENOMEM;
1234 }
1235
1236 /* init struct vb2_dvb */
1237 dev->ts.nr_bufs = 32;
1238 dev->ts.nr_packets = 32*4;
1239 fe0->dvb.name = dev->name;
1240 q = &fe0->dvb.dvbq;
1241 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1242 q->io_modes = VB2_MMAP | VB2_READ;
1243 q->drv_priv = &dev->ts_q;
1244 q->ops = &saa7134_ts_qops;
1245 q->mem_ops = &vb2_dma_sg_memops;
1246 q->buf_struct_size = sizeof(struct saa7134_buf);
1247 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
1248 q->lock = &dev->lock;
1249 q->dev = &dev->pci->dev;
1250 ret = vb2_queue_init(q);
1251 if (ret) {
1252 vb2_dvb_dealloc_frontends(&dev->frontends);
1253 return ret;
1254 }
1255
1256 switch (dev->board) {
1257 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
1258 pr_debug("pinnacle 300i dvb setup\n");
1259 fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
1260 &dev->i2c_adap);
1261 if (fe0->dvb.frontend) {
1262 fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
1263 }
1264 break;
1265 case SAA7134_BOARD_AVERMEDIA_777:
1266 case SAA7134_BOARD_AVERMEDIA_A16AR:
1267 pr_debug("avertv 777 dvb setup\n");
1268 fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
1269 &dev->i2c_adap);
1270 if (fe0->dvb.frontend) {
1271 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1272 &dev->i2c_adap, 0x61,
1273 TUNER_PHILIPS_TD1316);
1274 }
1275 break;
1276 case SAA7134_BOARD_AVERMEDIA_A16D:
1277 pr_debug("AverMedia A16D dvb setup\n");
1278 fe0->dvb.frontend = dvb_attach(mt352_attach,
1279 &avermedia_xc3028_mt352_dev,
1280 &dev->i2c_adap);
1281 attach_xc3028 = 1;
1282 break;
1283 case SAA7134_BOARD_MD7134:
1284 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1285 &medion_cardbus,
1286 &dev->i2c_adap);
1287 if (fe0->dvb.frontend) {
1288 /*
1289 * The TV tuner on this board is actually NOT
1290 * behind the demod i2c gate.
1291 * However, the demod EEPROM is indeed there and it
1292 * conflicts with the SAA7134 chip config EEPROM
1293 * if the i2c gate is open (since they have same
1294 * bus addresses) resulting in card PCI SVID / SSID
1295 * being garbage after a reboot from time to time.
1296 *
1297 * Let's just leave the gate permanently closed -
1298 * saa7134_i2c_eeprom_md7134_gate() will close it for
1299 * us at probe time if it was open for some reason.
1300 */
1301 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
1302 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1303 &dev->i2c_adap, medion_cardbus.tuner_address,
1304 TUNER_PHILIPS_FMD1216ME_MK3);
1305 }
1306 break;
1307 case SAA7134_BOARD_PHILIPS_TOUGH:
1308 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1309 &philips_tu1216_60_config,
1310 &dev->i2c_adap);
1311 if (fe0->dvb.frontend) {
1312 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1313 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1314 }
1315 break;
1316 case SAA7134_BOARD_FLYDVBTDUO:
1317 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
1318 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1319 &tda827x_cfg_0) < 0)
1320 goto detach_frontend;
1321 break;
1322 case SAA7134_BOARD_PHILIPS_EUROPA:
1323 case SAA7134_BOARD_VIDEOMATE_DVBT_300:
1324 case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
1325 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1326 &philips_europa_config,
1327 &dev->i2c_adap);
1328 if (fe0->dvb.frontend) {
1329 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1330 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1331 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1332 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1333 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1334 }
1335 break;
1336 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
1337 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1338 &technotrend_budget_t3000_config,
1339 &dev->i2c_adap);
1340 if (fe0->dvb.frontend) {
1341 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1342 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1343 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1344 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1345 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1346 }
1347 break;
1348 case SAA7134_BOARD_VIDEOMATE_DVBT_200:
1349 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1350 &philips_tu1216_61_config,
1351 &dev->i2c_adap);
1352 if (fe0->dvb.frontend) {
1353 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1354 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1355 }
1356 break;
1357 case SAA7134_BOARD_KWORLD_DVBT_210:
1358 if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
1359 &tda827x_cfg_2) < 0)
1360 goto detach_frontend;
1361 break;
1362 case SAA7134_BOARD_HAUPPAUGE_HVR1120:
1363 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1364 &hcw_tda10048_config,
1365 &dev->i2c_adap);
1366 if (fe0->dvb.frontend != NULL) {
1367 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1368 &dev->i2c_adap, 0x4b,
1369 &tda829x_no_probe);
1370 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1371 0x60, &dev->i2c_adap,
1372 &hcw_tda18271_config);
1373 }
1374 break;
1375 case SAA7134_BOARD_PHILIPS_TIGER:
1376 if (configure_tda827x_fe(dev, &philips_tiger_config,
1377 &tda827x_cfg_0) < 0)
1378 goto detach_frontend;
1379 break;
1380 case SAA7134_BOARD_PINNACLE_PCTV_310i:
1381 if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
1382 &tda827x_cfg_1) < 0)
1383 goto detach_frontend;
1384 break;
1385 case SAA7134_BOARD_HAUPPAUGE_HVR1110:
1386 if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
1387 &tda827x_cfg_1) < 0)
1388 goto detach_frontend;
1389 break;
1390 case SAA7134_BOARD_HAUPPAUGE_HVR1150:
1391 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
1392 &hcw_lgdt3305_config,
1393 &dev->i2c_adap);
1394 if (fe0->dvb.frontend) {
1395 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1396 &dev->i2c_adap, 0x4b,
1397 &tda829x_no_probe);
1398 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1399 0x60, &dev->i2c_adap,
1400 &hcw_tda18271_config);
1401 }
1402 break;
1403 case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
1404 if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
1405 &tda827x_cfg_0) < 0)
1406 goto detach_frontend;
1407 break;
1408 case SAA7134_BOARD_FLYDVBT_LR301:
1409 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1410 &tda827x_cfg_0) < 0)
1411 goto detach_frontend;
1412 break;
1413 case SAA7134_BOARD_FLYDVB_TRIO:
1414 if (!use_frontend) { /* terrestrial */
1415 if (configure_tda827x_fe(dev, &lifeview_trio_config,
1416 &tda827x_cfg_0) < 0)
1417 goto detach_frontend;
1418 } else { /* satellite */
1419 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
1420 if (fe0->dvb.frontend) {
1421 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
1422 &dev->i2c_adap, 0) == NULL) {
1423 pr_warn("%s: Lifeview Trio, No tda826x found!\n",
1424 __func__);
1425 goto detach_frontend;
1426 }
1427 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1428 &dev->i2c_adap,
1429 0x08, 0, 0, false) == NULL) {
1430 pr_warn("%s: Lifeview Trio, No ISL6421 found!\n",
1431 __func__);
1432 goto detach_frontend;
1433 }
1434 }
1435 }
1436 break;
1437 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
1438 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
1439 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1440 &ads_tech_duo_config,
1441 &dev->i2c_adap);
1442 if (fe0->dvb.frontend) {
1443 if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
1444 ads_tech_duo_config.tuner_address, &dev->i2c_adap,
1445 &ads_duo_cfg) == NULL) {
1446 pr_warn("no tda827x tuner found at addr: %02x\n",
1447 ads_tech_duo_config.tuner_address);
1448 goto detach_frontend;
1449 }
1450 } else
1451 pr_warn("failed to attach tda10046\n");
1452 break;
1453 case SAA7134_BOARD_TEVION_DVBT_220RF:
1454 if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
1455 &tda827x_cfg_0) < 0)
1456 goto detach_frontend;
1457 break;
1458 case SAA7134_BOARD_MEDION_MD8800_QUADRO:
1459 if (!use_frontend) { /* terrestrial */
1460 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1461 &tda827x_cfg_0) < 0)
1462 goto detach_frontend;
1463 } else { /* satellite */
1464 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1465 &flydvbs, &dev->i2c_adap);
1466 if (fe0->dvb.frontend) {
1467 struct dvb_frontend *fe = fe0->dvb.frontend;
1468 u8 dev_id = dev->eedata[2];
1469 u8 data = 0xc4;
1470 struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
1471
1472 if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
1473 0x60, &dev->i2c_adap, 0) == NULL) {
1474 pr_warn("%s: Medion Quadro, no tda826x found !\n",
1475 __func__);
1476 goto detach_frontend;
1477 }
1478 if (dev_id != 0x08) {
1479 /* we need to open the i2c gate (we know it exists) */
1480 fe->ops.i2c_gate_ctrl(fe, 1);
1481 if (dvb_attach(isl6405_attach, fe,
1482 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1483 pr_warn("%s: Medion Quadro, no ISL6405 found !\n",
1484 __func__);
1485 goto detach_frontend;
1486 }
1487 if (dev_id == 0x07) {
1488 /* fire up the 2nd section of the LNB supply since
1489 we can't do this from the other section */
1490 msg.buf = &data;
1491 i2c_transfer(&dev->i2c_adap, &msg, 1);
1492 }
1493 fe->ops.i2c_gate_ctrl(fe, 0);
1494 dev->original_set_voltage = fe->ops.set_voltage;
1495 fe->ops.set_voltage = md8800_set_voltage;
1496 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1497 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1498 } else {
1499 fe->ops.set_voltage = md8800_set_voltage2;
1500 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
1501 }
1502 }
1503 }
1504 break;
1505 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
1506 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
1507 &dev->i2c_adap);
1508 if (fe0->dvb.frontend)
1509 dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
1510 NULL, DVB_PLL_TDHU2);
1511 break;
1512 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
1513 case SAA7134_BOARD_KWORLD_ATSC110:
1514 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
1515 &dev->i2c_adap);
1516 if (fe0->dvb.frontend)
1517 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1518 &dev->i2c_adap, 0x61,
1519 TUNER_PHILIPS_TUV1236D);
1520 break;
1521 case SAA7134_BOARD_KWORLD_PC150U:
1522 saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */
1523 saa7134_tuner_callback(dev, 0,
1524 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1525 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1526 &kworld_s5h1411_config,
1527 &dev->i2c_adap);
1528 if (fe0->dvb.frontend != NULL) {
1529 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1530 &dev->i2c_adap, 0x4b,
1531 &tda829x_no_probe);
1532 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1533 0x60, &dev->i2c_adap,
1534 &kworld_pc150u_tda18271_config);
1535 }
1536 break;
1537 case SAA7134_BOARD_FLYDVBS_LR300:
1538 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1539 &dev->i2c_adap);
1540 if (fe0->dvb.frontend) {
1541 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1542 &dev->i2c_adap, 0) == NULL) {
1543 pr_warn("%s: No tda826x found!\n", __func__);
1544 goto detach_frontend;
1545 }
1546 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1547 &dev->i2c_adap,
1548 0x08, 0, 0, false) == NULL) {
1549 pr_warn("%s: No ISL6421 found!\n", __func__);
1550 goto detach_frontend;
1551 }
1552 }
1553 break;
1554 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
1555 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1556 &medion_cardbus,
1557 &dev->i2c_adap);
1558 if (fe0->dvb.frontend) {
1559 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1560 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1561
1562 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1563 &dev->i2c_adap, medion_cardbus.tuner_address,
1564 TUNER_PHILIPS_FMD1216ME_MK3);
1565 }
1566 break;
1567 case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
1568 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1569 &philips_europa_config,
1570 &dev->i2c_adap);
1571 if (fe0->dvb.frontend) {
1572 fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
1573 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1574 }
1575 break;
1576 case SAA7134_BOARD_CINERGY_HT_PCMCIA:
1577 if (configure_tda827x_fe(dev, &cinergy_ht_config,
1578 &tda827x_cfg_0) < 0)
1579 goto detach_frontend;
1580 break;
1581 case SAA7134_BOARD_CINERGY_HT_PCI:
1582 if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
1583 &tda827x_cfg_0) < 0)
1584 goto detach_frontend;
1585 break;
1586 case SAA7134_BOARD_PHILIPS_TIGER_S:
1587 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1588 &tda827x_cfg_2) < 0)
1589 goto detach_frontend;
1590 break;
1591 case SAA7134_BOARD_ASUS_P7131_4871:
1592 if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
1593 &tda827x_cfg_2) < 0)
1594 goto detach_frontend;
1595 break;
1596 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
1597 if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
1598 &tda827x_cfg_2) < 0)
1599 goto detach_frontend;
1600 break;
1601 case SAA7134_BOARD_AVERMEDIA_SUPER_007:
1602 if (configure_tda827x_fe(dev, &avermedia_super_007_config,
1603 &tda827x_cfg_0) < 0)
1604 goto detach_frontend;
1605 break;
1606 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
1607 if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
1608 &tda827x_cfg_2_sw42) < 0)
1609 goto detach_frontend;
1610 break;
1611 case SAA7134_BOARD_PHILIPS_SNAKE:
1612 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1613 &dev->i2c_adap);
1614 if (fe0->dvb.frontend) {
1615 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1616 &dev->i2c_adap, 0) == NULL) {
1617 pr_warn("%s: No tda826x found!\n", __func__);
1618 goto detach_frontend;
1619 }
1620 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1621 &dev->i2c_adap, 0, 0) == NULL) {
1622 pr_warn("%s: No lnbp21 found!\n", __func__);
1623 goto detach_frontend;
1624 }
1625 }
1626 break;
1627 case SAA7134_BOARD_CREATIX_CTX953:
1628 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1629 &tda827x_cfg_0) < 0)
1630 goto detach_frontend;
1631 break;
1632 case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
1633 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1634 &tda827x_cfg_2) < 0)
1635 goto detach_frontend;
1636 break;
1637 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
1638 pr_debug("AverMedia E506R dvb setup\n");
1639 saa7134_set_gpio(dev, 25, 0);
1640 msleep(10);
1641 saa7134_set_gpio(dev, 25, 1);
1642 fe0->dvb.frontend = dvb_attach(mt352_attach,
1643 &avermedia_xc3028_mt352_dev,
1644 &dev->i2c_adap);
1645 attach_xc3028 = 1;
1646 break;
1647 case SAA7134_BOARD_MD7134_BRIDGE_2:
1648 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1649 &sd1878_4m, &dev->i2c_adap);
1650 if (fe0->dvb.frontend) {
1651 struct dvb_frontend *fe;
1652 if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
1653 &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
1654 pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n",
1655 __func__);
1656 goto detach_frontend;
1657 }
1658 /* we need to open the i2c gate (we know it exists) */
1659 fe = fe0->dvb.frontend;
1660 fe->ops.i2c_gate_ctrl(fe, 1);
1661 if (dvb_attach(isl6405_attach, fe,
1662 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1663 pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n",
1664 __func__);
1665 goto detach_frontend;
1666 }
1667 fe->ops.i2c_gate_ctrl(fe, 0);
1668 dev->original_set_voltage = fe->ops.set_voltage;
1669 fe->ops.set_voltage = md8800_set_voltage;
1670 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1671 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1672 }
1673 break;
1674 case SAA7134_BOARD_AVERMEDIA_M103:
1675 saa7134_set_gpio(dev, 25, 0);
1676 msleep(10);
1677 saa7134_set_gpio(dev, 25, 1);
1678 fe0->dvb.frontend = dvb_attach(mt352_attach,
1679 &avermedia_xc3028_mt352_dev,
1680 &dev->i2c_adap);
1681 attach_xc3028 = 1;
1682 break;
1683 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
1684 if (!use_frontend) { /* terrestrial */
1685 if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
1686 &tda827x_cfg_2) < 0)
1687 goto detach_frontend;
1688 } else { /* satellite */
1689 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1690 &flydvbs, &dev->i2c_adap);
1691 if (fe0->dvb.frontend) {
1692 if (dvb_attach(tda826x_attach,
1693 fe0->dvb.frontend, 0x60,
1694 &dev->i2c_adap, 0) == NULL) {
1695 pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n",
1696 __func__);
1697 goto detach_frontend;
1698 }
1699 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1700 &dev->i2c_adap, 0, 0) == NULL) {
1701 pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n",
1702 __func__);
1703 goto detach_frontend;
1704 }
1705 }
1706 }
1707 break;
1708 case SAA7134_BOARD_ASUSTeK_PS3_100:
1709 if (!use_frontend) { /* terrestrial */
1710 if (configure_tda827x_fe(dev, &asus_ps3_100_config,
1711 &tda827x_cfg_2) < 0)
1712 goto detach_frontend;
1713 } else { /* satellite */
1714 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1715 &flydvbs, &dev->i2c_adap);
1716 if (fe0->dvb.frontend) {
1717 if (dvb_attach(tda826x_attach,
1718 fe0->dvb.frontend, 0x60,
1719 &dev->i2c_adap, 0) == NULL) {
1720 pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n",
1721 __func__);
1722 goto detach_frontend;
1723 }
1724 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1725 &dev->i2c_adap, 0, 0) == NULL) {
1726 pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n",
1727 __func__);
1728 goto detach_frontend;
1729 }
1730 }
1731 }
1732 break;
1733 case SAA7134_BOARD_ASUSTeK_TIGER:
1734 if (configure_tda827x_fe(dev, &philips_tiger_config,
1735 &tda827x_cfg_0) < 0)
1736 goto detach_frontend;
1737 break;
1738 case SAA7134_BOARD_BEHOLD_H6:
1739 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1740 &behold_h6_config,
1741 &dev->i2c_adap);
1742 if (fe0->dvb.frontend) {
1743 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1744 &dev->i2c_adap, 0x61,
1745 TUNER_PHILIPS_FMD1216MEX_MK3);
1746 }
1747 break;
1748 case SAA7134_BOARD_BEHOLD_X7:
1749 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1750 &behold_x7_config,
1751 &dev->i2c_adap);
1752 if (fe0->dvb.frontend) {
1753 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1754 &dev->i2c_adap, &behold_x7_tunerconfig);
1755 }
1756 break;
1757 case SAA7134_BOARD_BEHOLD_H7:
1758 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1759 &behold_x7_config,
1760 &dev->i2c_adap);
1761 if (fe0->dvb.frontend) {
1762 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1763 &dev->i2c_adap, &behold_x7_tunerconfig);
1764 }
1765 break;
1766 case SAA7134_BOARD_AVERMEDIA_A700_PRO:
1767 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
1768 /* Zarlink ZL10313 */
1769 fe0->dvb.frontend = dvb_attach(mt312_attach,
1770 &avertv_a700_mt312, &dev->i2c_adap);
1771 if (fe0->dvb.frontend) {
1772 if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
1773 &avertv_a700_tuner, &dev->i2c_adap) == NULL) {
1774 pr_warn("%s: No zl10036 found!\n",
1775 __func__);
1776 }
1777 }
1778 break;
1779 case SAA7134_BOARD_VIDEOMATE_S350:
1780 fe0->dvb.frontend = dvb_attach(mt312_attach,
1781 &zl10313_compro_s350_config, &dev->i2c_adap);
1782 if (fe0->dvb.frontend)
1783 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1784 0x60, &dev->i2c_adap) == NULL)
1785 pr_warn("%s: No zl10039 found!\n",
1786 __func__);
1787
1788 break;
1789 case SAA7134_BOARD_VIDEOMATE_T750:
1790 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1791 &videomate_t750_zl10353_config,
1792 &dev->i2c_adap);
1793 if (fe0->dvb.frontend != NULL) {
1794 if (dvb_attach(qt1010_attach,
1795 fe0->dvb.frontend,
1796 &dev->i2c_adap,
1797 &videomate_t750_qt1010_config) == NULL)
1798 pr_warn("error attaching QT1010\n");
1799 }
1800 break;
1801 case SAA7134_BOARD_ZOLID_HYBRID_PCI:
1802 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1803 &zolid_tda10048_config,
1804 &dev->i2c_adap);
1805 if (fe0->dvb.frontend != NULL) {
1806 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1807 &dev->i2c_adap, 0x4b,
1808 &tda829x_no_probe);
1809 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1810 0x60, &dev->i2c_adap,
1811 &zolid_tda18271_config);
1812 }
1813 break;
1814 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
1815 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1816 &dtv1000s_tda10048_config,
1817 &dev->i2c_adap);
1818 if (fe0->dvb.frontend != NULL) {
1819 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1820 &dev->i2c_adap, 0x4b,
1821 &tda829x_no_probe);
1822 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1823 0x60, &dev->i2c_adap,
1824 &dtv1000s_tda18271_config);
1825 }
1826 break;
1827 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
1828 /* Switch to digital mode */
1829 saa7134_tuner_callback(dev, 0,
1830 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1831 fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
1832 &kworld_mb86a20s_config,
1833 &dev->i2c_adap);
1834 if (fe0->dvb.frontend != NULL) {
1835 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1836 &dev->i2c_adap, 0x4b,
1837 &tda829x_no_probe);
1838 fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl;
1839 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1840 0x60, &dev->i2c_adap,
1841 &kworld_tda18271_config);
1842 }
1843
1844 /* mb86a20s need to use the I2C gateway */
1845 break;
1846 case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
1847 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1848 &prohdtv_pro2_lgs8g75_config,
1849 &dev->i2c_adap);
1850 if (fe0->dvb.frontend != NULL) {
1851 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1852 &dev->i2c_adap, 0x4b,
1853 &tda829x_no_probe);
1854 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1855 0x60, &dev->i2c_adap,
1856 &prohdtv_pro2_tda18271_config);
1857 }
1858 break;
1859 case SAA7134_BOARD_AVERMEDIA_A706:
1860 /* Enable all DVB-S devices now */
1861 /* CE5039 DVB-S tuner SLEEP pin low */
1862 saa7134_set_gpio(dev, 23, 0);
1863 /* CE6313 DVB-S demod SLEEP pin low */
1864 saa7134_set_gpio(dev, 9, 0);
1865 /* CE6313 DVB-S demod RESET# pin high */
1866 saa7134_set_gpio(dev, 25, 1);
1867 msleep(1);
1868 fe0->dvb.frontend = dvb_attach(mt312_attach,
1869 &zl10313_avermedia_a706_config, &dev->i2c_adap);
1870 if (fe0->dvb.frontend) {
1871 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
1872 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1873 0x60, &dev->i2c_adap) == NULL)
1874 pr_warn("%s: No zl10039 found!\n",
1875 __func__);
1876 }
1877 break;
1878 case SAA7134_BOARD_LEADTEK_WINFAST_HDTV200_H:
1879 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1880 &hdtv200h_s5h1411_config,
1881 &dev->i2c_adap);
1882 if (fe0->dvb.frontend) {
1883 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1884 &dev->i2c_adap, 0x4b,
1885 &tda829x_no_probe);
1886 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1887 0x60, &dev->i2c_adap,
1888 &hdtv200h_tda18271_config);
1889 }
1890 break;
1891 default:
1892 pr_warn("Huh? unknown DVB card?\n");
1893 break;
1894 }
1895
1896 if (attach_xc3028) {
1897 struct dvb_frontend *fe;
1898 struct xc2028_config cfg = {
1899 .i2c_adap = &dev->i2c_adap,
1900 .i2c_addr = 0x61,
1901 };
1902
1903 if (!fe0->dvb.frontend)
1904 goto detach_frontend;
1905
1906 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
1907 if (!fe) {
1908 pr_err("%s/2: xc3028 attach failed\n",
1909 dev->name);
1910 goto detach_frontend;
1911 }
1912 }
1913
1914 if (NULL == fe0->dvb.frontend) {
1915 pr_err("%s/dvb: frontend initialization failed\n", dev->name);
1916 goto detach_frontend;
1917 }
1918 /* define general-purpose callback pointer */
1919 fe0->dvb.frontend->callback = saa7134_tuner_callback;
1920
1921 /* register everything else */
1922 #ifndef CONFIG_MEDIA_CONTROLLER_DVB
1923 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
1924 &dev->pci->dev, NULL,
1925 adapter_nr, 0);
1926 #else
1927 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
1928 &dev->pci->dev, dev->media_dev,
1929 adapter_nr, 0);
1930 #endif
1931
1932 /* this sequence is necessary to make the tda1004x load its firmware
1933 * and to enter analog mode of hybrid boards
1934 */
1935 if (!ret) {
1936 if (fe0->dvb.frontend->ops.init)
1937 fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
1938 if (fe0->dvb.frontend->ops.sleep)
1939 fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
1940 if (fe0->dvb.frontend->ops.tuner_ops.sleep)
1941 fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
1942 }
1943 return ret;
1944
1945 detach_frontend:
1946 vb2_dvb_dealloc_frontends(&dev->frontends);
1947 vb2_queue_release(&fe0->dvb.dvbq);
1948 return -EINVAL;
1949 }
1950
dvb_fini(struct saa7134_dev * dev)1951 static int dvb_fini(struct saa7134_dev *dev)
1952 {
1953 struct vb2_dvb_frontend *fe0;
1954
1955 /* Get the first frontend */
1956 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
1957 if (!fe0)
1958 return -EINVAL;
1959
1960 /* FIXME: I suspect that this code is bogus, since the entry for
1961 Pinnacle 300I DVB-T PAL already defines the proper init to allow
1962 the detection of mt2032 (TDA9887_PORT2_INACTIVE)
1963 */
1964 if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
1965 struct v4l2_priv_tun_config tda9887_cfg;
1966 static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
1967
1968 tda9887_cfg.tuner = TUNER_TDA9887;
1969 tda9887_cfg.priv = &on;
1970
1971 /* otherwise we don't detect the tuner on next insmod */
1972 saa_call_all(dev, tuner, s_config, &tda9887_cfg);
1973 } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
1974 if ((dev->eedata[2] == 0x07) && use_frontend) {
1975 /* turn off the 2nd lnb supply */
1976 u8 data = 0x80;
1977 struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
1978 struct dvb_frontend *fe;
1979 fe = fe0->dvb.frontend;
1980 if (fe->ops.i2c_gate_ctrl) {
1981 fe->ops.i2c_gate_ctrl(fe, 1);
1982 i2c_transfer(&dev->i2c_adap, &msg, 1);
1983 fe->ops.i2c_gate_ctrl(fe, 0);
1984 }
1985 }
1986 }
1987 vb2_dvb_unregister_bus(&dev->frontends);
1988 vb2_queue_release(&fe0->dvb.dvbq);
1989 return 0;
1990 }
1991
1992 static struct saa7134_mpeg_ops dvb_ops = {
1993 .type = SAA7134_MPEG_DVB,
1994 .init = dvb_init,
1995 .fini = dvb_fini,
1996 };
1997
dvb_register(void)1998 static int __init dvb_register(void)
1999 {
2000 return saa7134_ts_register(&dvb_ops);
2001 }
2002
dvb_unregister(void)2003 static void __exit dvb_unregister(void)
2004 {
2005 saa7134_ts_unregister(&dvb_ops);
2006 }
2007
2008 module_init(dvb_register);
2009 module_exit(dvb_unregister);
2010