1 /* 2 * Samsung S5K6A3 image sensor driver 3 * 4 * Copyright (C) 2013 Samsung Electronics Co., Ltd. 5 * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/delay.h> 14 #include <linux/device.h> 15 #include <linux/errno.h> 16 #include <linux/gpio.h> 17 #include <linux/i2c.h> 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/of_gpio.h> 21 #include <linux/pm_runtime.h> 22 #include <linux/regulator/consumer.h> 23 #include <linux/slab.h> 24 #include <linux/videodev2.h> 25 #include <media/v4l2-async.h> 26 #include <media/v4l2-subdev.h> 27 28 #define S5K6A3_SENSOR_MAX_WIDTH 1412 29 #define S5K6A3_SENSOR_MAX_HEIGHT 1412 30 #define S5K6A3_SENSOR_MIN_WIDTH 32 31 #define S5K6A3_SENSOR_MIN_HEIGHT 32 32 33 #define S5K6A3_DEFAULT_WIDTH 1296 34 #define S5K6A3_DEFAULT_HEIGHT 732 35 36 #define S5K6A3_DRV_NAME "S5K6A3" 37 #define S5K6A3_CLK_NAME "extclk" 38 #define S5K6A3_DEFAULT_CLK_FREQ 24000000U 39 40 enum { 41 S5K6A3_SUPP_VDDA, 42 S5K6A3_SUPP_VDDIO, 43 S5K6A3_SUPP_AFVDD, 44 S5K6A3_NUM_SUPPLIES, 45 }; 46 47 /** 48 * struct s5k6a3 - fimc-is sensor data structure 49 * @dev: pointer to this I2C client device structure 50 * @subdev: the image sensor's v4l2 subdev 51 * @pad: subdev media source pad 52 * @supplies: image sensor's voltage regulator supplies 53 * @gpio_reset: GPIO connected to the sensor's reset pin 54 * @lock: mutex protecting the structure's members below 55 * @format: media bus format at the sensor's source pad 56 */ 57 struct s5k6a3 { 58 struct device *dev; 59 struct v4l2_subdev subdev; 60 struct media_pad pad; 61 struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES]; 62 int gpio_reset; 63 struct mutex lock; 64 struct v4l2_mbus_framefmt format; 65 struct clk *clock; 66 u32 clock_frequency; 67 int power_count; 68 }; 69 70 static const char * const s5k6a3_supply_names[] = { 71 [S5K6A3_SUPP_VDDA] = "svdda", 72 [S5K6A3_SUPP_VDDIO] = "svddio", 73 [S5K6A3_SUPP_AFVDD] = "afvdd", 74 }; 75 76 static inline struct s5k6a3 *sd_to_s5k6a3(struct v4l2_subdev *sd) 77 { 78 return container_of(sd, struct s5k6a3, subdev); 79 } 80 81 static const struct v4l2_mbus_framefmt s5k6a3_formats[] = { 82 { 83 .code = MEDIA_BUS_FMT_SGRBG10_1X10, 84 .colorspace = V4L2_COLORSPACE_SRGB, 85 .field = V4L2_FIELD_NONE, 86 } 87 }; 88 89 static const struct v4l2_mbus_framefmt *find_sensor_format( 90 struct v4l2_mbus_framefmt *mf) 91 { 92 int i; 93 94 for (i = 0; i < ARRAY_SIZE(s5k6a3_formats); i++) 95 if (mf->code == s5k6a3_formats[i].code) 96 return &s5k6a3_formats[i]; 97 98 return &s5k6a3_formats[0]; 99 } 100 101 static int s5k6a3_enum_mbus_code(struct v4l2_subdev *sd, 102 struct v4l2_subdev_pad_config *cfg, 103 struct v4l2_subdev_mbus_code_enum *code) 104 { 105 if (code->index >= ARRAY_SIZE(s5k6a3_formats)) 106 return -EINVAL; 107 108 code->code = s5k6a3_formats[code->index].code; 109 return 0; 110 } 111 112 static void s5k6a3_try_format(struct v4l2_mbus_framefmt *mf) 113 { 114 const struct v4l2_mbus_framefmt *fmt; 115 116 fmt = find_sensor_format(mf); 117 mf->code = fmt->code; 118 mf->field = V4L2_FIELD_NONE; 119 v4l_bound_align_image(&mf->width, S5K6A3_SENSOR_MIN_WIDTH, 120 S5K6A3_SENSOR_MAX_WIDTH, 0, 121 &mf->height, S5K6A3_SENSOR_MIN_HEIGHT, 122 S5K6A3_SENSOR_MAX_HEIGHT, 0, 0); 123 } 124 125 static struct v4l2_mbus_framefmt *__s5k6a3_get_format( 126 struct s5k6a3 *sensor, struct v4l2_subdev_pad_config *cfg, 127 u32 pad, enum v4l2_subdev_format_whence which) 128 { 129 if (which == V4L2_SUBDEV_FORMAT_TRY) 130 return cfg ? v4l2_subdev_get_try_format(&sensor->subdev, cfg, pad) : NULL; 131 132 return &sensor->format; 133 } 134 135 static int s5k6a3_set_fmt(struct v4l2_subdev *sd, 136 struct v4l2_subdev_pad_config *cfg, 137 struct v4l2_subdev_format *fmt) 138 { 139 struct s5k6a3 *sensor = sd_to_s5k6a3(sd); 140 struct v4l2_mbus_framefmt *mf; 141 142 s5k6a3_try_format(&fmt->format); 143 144 mf = __s5k6a3_get_format(sensor, cfg, fmt->pad, fmt->which); 145 if (mf) { 146 mutex_lock(&sensor->lock); 147 if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) 148 *mf = fmt->format; 149 mutex_unlock(&sensor->lock); 150 } 151 return 0; 152 } 153 154 static int s5k6a3_get_fmt(struct v4l2_subdev *sd, 155 struct v4l2_subdev_pad_config *cfg, 156 struct v4l2_subdev_format *fmt) 157 { 158 struct s5k6a3 *sensor = sd_to_s5k6a3(sd); 159 struct v4l2_mbus_framefmt *mf; 160 161 mf = __s5k6a3_get_format(sensor, cfg, fmt->pad, fmt->which); 162 163 mutex_lock(&sensor->lock); 164 fmt->format = *mf; 165 mutex_unlock(&sensor->lock); 166 return 0; 167 } 168 169 static struct v4l2_subdev_pad_ops s5k6a3_pad_ops = { 170 .enum_mbus_code = s5k6a3_enum_mbus_code, 171 .get_fmt = s5k6a3_get_fmt, 172 .set_fmt = s5k6a3_set_fmt, 173 }; 174 175 static int s5k6a3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) 176 { 177 struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(sd, fh->pad, 0); 178 179 *format = s5k6a3_formats[0]; 180 format->width = S5K6A3_DEFAULT_WIDTH; 181 format->height = S5K6A3_DEFAULT_HEIGHT; 182 183 return 0; 184 } 185 186 static const struct v4l2_subdev_internal_ops s5k6a3_sd_internal_ops = { 187 .open = s5k6a3_open, 188 }; 189 190 static int __s5k6a3_power_on(struct s5k6a3 *sensor) 191 { 192 int i = S5K6A3_SUPP_VDDA; 193 int ret; 194 195 ret = clk_set_rate(sensor->clock, sensor->clock_frequency); 196 if (ret < 0) 197 return ret; 198 199 ret = pm_runtime_get(sensor->dev); 200 if (ret < 0) 201 return ret; 202 203 ret = regulator_enable(sensor->supplies[i].consumer); 204 if (ret < 0) 205 goto error_rpm_put; 206 207 ret = clk_prepare_enable(sensor->clock); 208 if (ret < 0) 209 goto error_reg_dis; 210 211 for (i++; i < S5K6A3_NUM_SUPPLIES; i++) { 212 ret = regulator_enable(sensor->supplies[i].consumer); 213 if (ret < 0) 214 goto error_reg_dis; 215 } 216 217 gpio_set_value(sensor->gpio_reset, 1); 218 usleep_range(600, 800); 219 gpio_set_value(sensor->gpio_reset, 0); 220 usleep_range(600, 800); 221 gpio_set_value(sensor->gpio_reset, 1); 222 223 /* Delay needed for the sensor initialization */ 224 msleep(20); 225 return 0; 226 227 error_reg_dis: 228 for (--i; i >= 0; --i) 229 regulator_disable(sensor->supplies[i].consumer); 230 error_rpm_put: 231 pm_runtime_put(sensor->dev); 232 return ret; 233 } 234 235 static int __s5k6a3_power_off(struct s5k6a3 *sensor) 236 { 237 int i; 238 239 gpio_set_value(sensor->gpio_reset, 0); 240 241 for (i = S5K6A3_NUM_SUPPLIES - 1; i >= 0; i--) 242 regulator_disable(sensor->supplies[i].consumer); 243 244 clk_disable_unprepare(sensor->clock); 245 pm_runtime_put(sensor->dev); 246 return 0; 247 } 248 249 static int s5k6a3_s_power(struct v4l2_subdev *sd, int on) 250 { 251 struct s5k6a3 *sensor = sd_to_s5k6a3(sd); 252 int ret = 0; 253 254 mutex_lock(&sensor->lock); 255 256 if (sensor->power_count == !on) { 257 if (on) 258 ret = __s5k6a3_power_on(sensor); 259 else 260 ret = __s5k6a3_power_off(sensor); 261 262 if (ret == 0) 263 sensor->power_count += on ? 1 : -1; 264 } 265 266 mutex_unlock(&sensor->lock); 267 return ret; 268 } 269 270 static struct v4l2_subdev_core_ops s5k6a3_core_ops = { 271 .s_power = s5k6a3_s_power, 272 }; 273 274 static struct v4l2_subdev_ops s5k6a3_subdev_ops = { 275 .core = &s5k6a3_core_ops, 276 .pad = &s5k6a3_pad_ops, 277 }; 278 279 static int s5k6a3_probe(struct i2c_client *client, 280 const struct i2c_device_id *id) 281 { 282 struct device *dev = &client->dev; 283 struct s5k6a3 *sensor; 284 struct v4l2_subdev *sd; 285 int gpio, i, ret; 286 287 sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); 288 if (!sensor) 289 return -ENOMEM; 290 291 mutex_init(&sensor->lock); 292 sensor->gpio_reset = -EINVAL; 293 sensor->clock = ERR_PTR(-EINVAL); 294 sensor->dev = dev; 295 296 sensor->clock = devm_clk_get(sensor->dev, S5K6A3_CLK_NAME); 297 if (IS_ERR(sensor->clock)) 298 return PTR_ERR(sensor->clock); 299 300 gpio = of_get_gpio_flags(dev->of_node, 0, NULL); 301 if (!gpio_is_valid(gpio)) 302 return gpio; 303 304 ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW, 305 S5K6A3_DRV_NAME); 306 if (ret < 0) 307 return ret; 308 309 sensor->gpio_reset = gpio; 310 311 if (of_property_read_u32(dev->of_node, "clock-frequency", 312 &sensor->clock_frequency)) { 313 sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ; 314 dev_info(dev, "using default %u Hz clock frequency\n", 315 sensor->clock_frequency); 316 } 317 318 for (i = 0; i < S5K6A3_NUM_SUPPLIES; i++) 319 sensor->supplies[i].supply = s5k6a3_supply_names[i]; 320 321 ret = devm_regulator_bulk_get(&client->dev, S5K6A3_NUM_SUPPLIES, 322 sensor->supplies); 323 if (ret < 0) 324 return ret; 325 326 sd = &sensor->subdev; 327 v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops); 328 sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 329 sd->internal_ops = &s5k6a3_sd_internal_ops; 330 331 sensor->format.code = s5k6a3_formats[0].code; 332 sensor->format.width = S5K6A3_DEFAULT_WIDTH; 333 sensor->format.height = S5K6A3_DEFAULT_HEIGHT; 334 335 sensor->pad.flags = MEDIA_PAD_FL_SOURCE; 336 ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0); 337 if (ret < 0) 338 return ret; 339 340 pm_runtime_no_callbacks(dev); 341 pm_runtime_enable(dev); 342 343 ret = v4l2_async_register_subdev(sd); 344 345 if (ret < 0) { 346 pm_runtime_disable(&client->dev); 347 media_entity_cleanup(&sd->entity); 348 } 349 350 return ret; 351 } 352 353 static int s5k6a3_remove(struct i2c_client *client) 354 { 355 struct v4l2_subdev *sd = i2c_get_clientdata(client); 356 357 pm_runtime_disable(&client->dev); 358 v4l2_async_unregister_subdev(sd); 359 media_entity_cleanup(&sd->entity); 360 return 0; 361 } 362 363 static const struct i2c_device_id s5k6a3_ids[] = { 364 { } 365 }; 366 367 #ifdef CONFIG_OF 368 static const struct of_device_id s5k6a3_of_match[] = { 369 { .compatible = "samsung,s5k6a3" }, 370 { /* sentinel */ } 371 }; 372 MODULE_DEVICE_TABLE(of, s5k6a3_of_match); 373 #endif 374 375 static struct i2c_driver s5k6a3_driver = { 376 .driver = { 377 .of_match_table = of_match_ptr(s5k6a3_of_match), 378 .name = S5K6A3_DRV_NAME, 379 .owner = THIS_MODULE, 380 }, 381 .probe = s5k6a3_probe, 382 .remove = s5k6a3_remove, 383 .id_table = s5k6a3_ids, 384 }; 385 386 module_i2c_driver(s5k6a3_driver); 387 388 MODULE_DESCRIPTION("S5K6A3 image sensor subdev driver"); 389 MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); 390 MODULE_LICENSE("GPL v2"); 391