1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig MAILBOX 3 bool "Mailbox Hardware Support" 4 help 5 Mailbox is a framework to control hardware communication between 6 on-chip processors through queued messages and interrupt driven 7 signals. Say Y if your platform supports hardware mailboxes. 8 9if MAILBOX 10 11config ARM_MHU 12 tristate "ARM MHU Mailbox" 13 depends on ARM_AMBA 14 help 15 Say Y here if you want to build the ARM MHU controller driver. 16 The controller has 3 mailbox channels, the last of which can be 17 used in Secure mode only. 18 19config ARM_MHU_V2 20 tristate "ARM MHUv2 Mailbox" 21 depends on ARM_AMBA 22 help 23 Say Y here if you want to build the ARM MHUv2 controller driver, 24 which provides unidirectional mailboxes between processing elements. 25 26config IMX_MBOX 27 tristate "i.MX Mailbox" 28 depends on ARCH_MXC || COMPILE_TEST 29 help 30 Mailbox implementation for i.MX Messaging Unit (MU). 31 32config PLATFORM_MHU 33 tristate "Platform MHU Mailbox" 34 depends on OF 35 depends on HAS_IOMEM 36 help 37 Say Y here if you want to build a platform specific variant MHU 38 controller driver. 39 The controller has a maximum of 3 mailbox channels, the last of 40 which can be used in Secure mode only. 41 42config PL320_MBOX 43 bool "ARM PL320 Mailbox" 44 depends on ARM_AMBA 45 help 46 An implementation of the ARM PL320 Interprocessor Communication 47 Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to 48 send short messages between Highbank's A9 cores and the EnergyCore 49 Management Engine, primarily for cpufreq. Say Y here if you want 50 to use the PL320 IPCM support. 51 52config ARMADA_37XX_RWTM_MBOX 53 tristate "Armada 37xx rWTM BIU Mailbox" 54 depends on ARCH_MVEBU || COMPILE_TEST 55 depends on OF 56 help 57 Mailbox implementation for communication with the the firmware 58 running on the Cortex-M3 rWTM secure processor of the Armada 37xx 59 SOC. Say Y here if you are building for such a device (for example 60 the Turris Mox router). 61 62config OMAP2PLUS_MBOX 63 tristate "OMAP2+ Mailbox framework support" 64 depends on ARCH_OMAP2PLUS || ARCH_K3 65 help 66 Mailbox implementation for OMAP family chips with hardware for 67 interprocessor communication involving DSP, IVA1.0 and IVA2 in 68 OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you 69 want to use OMAP2+ Mailbox framework support. 70 71config OMAP_MBOX_KFIFO_SIZE 72 int "Mailbox kfifo default buffer size (bytes)" 73 depends on OMAP2PLUS_MBOX 74 default 256 75 help 76 Specify the default size of mailbox's kfifo buffers (bytes). 77 This can also be changed at runtime (via the mbox_kfifo_size 78 module parameter). 79 80config ROCKCHIP_MBOX 81 bool "Rockchip Soc Integrated Mailbox Support" 82 depends on ARCH_ROCKCHIP || COMPILE_TEST 83 help 84 This driver provides support for inter-processor communication 85 between CPU cores and MCU processor on Some Rockchip SOCs. 86 Please check it that the Soc you use have Mailbox hardware. 87 Say Y here if you want to use the Rockchip Mailbox support. 88 89config PCC 90 bool "Platform Communication Channel Driver" 91 depends on ACPI 92 default n 93 help 94 ACPI 5.0+ spec defines a generic mode of communication 95 between the OS and a platform such as the BMC. This medium 96 (PCC) is typically used by CPPC (ACPI CPU Performance management), 97 RAS (ACPI reliability protocol) and MPST (ACPI Memory power 98 states). Select this driver if your platform implements the 99 PCC clients mentioned above. 100 101config ALTERA_MBOX 102 tristate "Altera Mailbox" 103 depends on HAS_IOMEM 104 help 105 An implementation of the Altera Mailbox soft core. It is used 106 to send message between processors. Say Y here if you want to use the 107 Altera mailbox support. 108 109config BCM2835_MBOX 110 tristate "BCM2835 Mailbox" 111 depends on ARCH_BCM2835 112 help 113 An implementation of the BCM2385 Mailbox. It is used to invoke 114 the services of the Videocore. Say Y here if you want to use the 115 BCM2835 Mailbox. 116 117config STI_MBOX 118 tristate "STI Mailbox framework support" 119 depends on ARCH_STI && OF 120 help 121 Mailbox implementation for STMicroelectonics family chips with 122 hardware for interprocessor communication. 123 124config TI_MESSAGE_MANAGER 125 tristate "Texas Instruments Message Manager Driver" 126 depends on ARCH_KEYSTONE || ARCH_K3 127 help 128 An implementation of Message Manager slave driver for Keystone 129 and K3 architecture SoCs from Texas Instruments. Message Manager 130 is a communication entity found on few of Texas Instrument's keystone 131 and K3 architecture SoCs. These may be used for communication between 132 multiple processors within the SoC. Select this driver if your 133 platform has support for the hardware block. 134 135config HI3660_MBOX 136 tristate "Hi3660 Mailbox" if EXPERT 137 depends on (ARCH_HISI || COMPILE_TEST) 138 depends on OF 139 default ARCH_HISI 140 help 141 An implementation of the hi3660 mailbox. It is used to send message 142 between application processors and other processors/MCU/DSP. Select 143 Y here if you want to use Hi3660 mailbox controller. 144 145config HI6220_MBOX 146 tristate "Hi6220 Mailbox" if EXPERT 147 depends on (ARCH_HISI || COMPILE_TEST) 148 depends on OF 149 default ARCH_HISI 150 help 151 An implementation of the hi6220 mailbox. It is used to send message 152 between application processors and MCU. Say Y here if you want to 153 build Hi6220 mailbox controller driver. 154 155config MAILBOX_TEST 156 tristate "Mailbox Test Client" 157 depends on OF 158 depends on HAS_IOMEM 159 help 160 Test client to help with testing new Controller driver 161 implementations. 162 163config QCOM_APCS_IPC 164 tristate "Qualcomm APCS IPC driver" 165 depends on ARCH_QCOM || COMPILE_TEST 166 help 167 Say y here to enable support for the APCS IPC mailbox driver, 168 providing an interface for invoking the inter-process communication 169 signals from the application processor to other masters. 170 171config TEGRA_HSP_MBOX 172 bool "Tegra HSP (Hardware Synchronization Primitives) Driver" 173 depends on ARCH_TEGRA 174 help 175 The Tegra HSP driver is used for the interprocessor communication 176 between different remote processors and host processors on Tegra186 177 and later SoCs. Say Y here if you want to have this support. 178 If unsure say N. 179 180config XGENE_SLIMPRO_MBOX 181 tristate "APM SoC X-Gene SLIMpro Mailbox Controller" 182 depends on ARCH_XGENE 183 help 184 An implementation of the APM X-Gene Interprocessor Communication 185 Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller. 186 It is used to send short messages between ARM64-bit cores and 187 the SLIMpro Management Engine, primarily for PM. Say Y here if you 188 want to use the APM X-Gene SLIMpro IPCM support. 189 190config BCM_PDC_MBOX 191 tristate "Broadcom FlexSparx DMA Mailbox" 192 depends on ARCH_BCM_IPROC || COMPILE_TEST 193 help 194 Mailbox implementation for the Broadcom FlexSparx DMA ring manager, 195 which provides access to various offload engines on Broadcom 196 SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2. 197 198config BCM_FLEXRM_MBOX 199 tristate "Broadcom FlexRM Mailbox" 200 depends on ARM64 201 depends on ARCH_BCM_IPROC || COMPILE_TEST 202 select GENERIC_MSI_IRQ_DOMAIN 203 default m if ARCH_BCM_IPROC 204 help 205 Mailbox implementation of the Broadcom FlexRM ring manager, 206 which provides access to various offload engines on Broadcom 207 SoCs. Say Y here if you want to use the Broadcom FlexRM. 208 209config STM32_IPCC 210 tristate "STM32 IPCC Mailbox" 211 depends on MACH_STM32MP157 || COMPILE_TEST 212 help 213 Mailbox implementation for STMicroelectonics STM32 family chips 214 with hardware for Inter-Processor Communication Controller (IPCC) 215 between processors. Say Y here if you want to have this support. 216 217config MTK_CMDQ_MBOX 218 tristate "MediaTek CMDQ Mailbox Support" 219 depends on ARCH_MEDIATEK || COMPILE_TEST 220 select MTK_INFRACFG 221 help 222 Say yes here to add support for the MediaTek Command Queue (CMDQ) 223 mailbox driver. The CMDQ is used to help read/write registers with 224 critical time limitation, such as updating display configuration 225 during the vblank. 226 227config ZYNQMP_IPI_MBOX 228 bool "Xilinx ZynqMP IPI Mailbox" 229 depends on ARCH_ZYNQMP && OF 230 help 231 Say yes here to add support for Xilinx IPI mailbox driver. 232 This mailbox driver is used to send notification or short message 233 between processors with Xilinx ZynqMP IPI. It will place the 234 message to the IPI buffer and will access the IPI control 235 registers to kick the other processor or enquire status. 236 237config SUN6I_MSGBOX 238 tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box" 239 depends on ARCH_SUNXI || COMPILE_TEST 240 default ARCH_SUNXI 241 help 242 Mailbox implementation for the hardware message box present in 243 various Allwinner SoCs. This mailbox is used for communication 244 between the application CPUs and the power management coprocessor. 245 246config SPRD_MBOX 247 tristate "Spreadtrum Mailbox" 248 depends on ARCH_SPRD || COMPILE_TEST 249 help 250 Mailbox driver implementation for the Spreadtrum platform. It is used 251 to send message between application processors and MCU. Say Y here if 252 you want to build the Spreatrum mailbox controller driver. 253 254config QCOM_IPCC 255 bool "Qualcomm Technologies, Inc. IPCC driver" 256 depends on ARCH_QCOM || COMPILE_TEST 257 help 258 Qualcomm Technologies, Inc. Inter-Processor Communication Controller 259 (IPCC) driver for MSM devices. The driver provides mailbox support for 260 sending interrupts to the clients. On the other hand, the driver also 261 acts as an interrupt controller for receiving interrupts from clients. 262 Say Y here if you want to build this driver. 263 264endif 265