xref: /linux/drivers/mailbox/Kconfig (revision 4b660dbd9ee2059850fd30e0df420ca7a38a1856)
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig MAILBOX
3	bool "Mailbox Hardware Support"
4	help
5	  Mailbox is a framework to control hardware communication between
6	  on-chip processors through queued messages and interrupt driven
7	  signals. Say Y if your platform supports hardware mailboxes.
8
9if MAILBOX
10
11config ARM_MHU
12	tristate "ARM MHU Mailbox"
13	depends on ARM_AMBA
14	help
15	  Say Y here if you want to build the ARM MHU controller driver.
16	  The controller has 3 mailbox channels, the last of which can be
17	  used in Secure mode only.
18
19config ARM_MHU_V2
20	tristate "ARM MHUv2 Mailbox"
21	depends on ARM_AMBA
22	help
23	  Say Y here if you want to build the ARM MHUv2 controller driver,
24	  which provides unidirectional mailboxes between processing elements.
25
26config IMX_MBOX
27	tristate "i.MX Mailbox"
28	depends on ARCH_MXC || COMPILE_TEST
29	help
30	  Mailbox implementation for i.MX Messaging Unit (MU).
31
32config PLATFORM_MHU
33	tristate "Platform MHU Mailbox"
34	depends on OF
35	depends on HAS_IOMEM
36	help
37	  Say Y here if you want to build a platform specific variant MHU
38	  controller driver.
39	  The controller has a maximum of 3 mailbox channels, the last of
40	  which can be used in Secure mode only.
41
42config PL320_MBOX
43	bool "ARM PL320 Mailbox"
44	depends on ARM_AMBA
45	help
46	  An implementation of the ARM PL320 Interprocessor Communication
47	  Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to
48	  send short messages between Highbank's A9 cores and the EnergyCore
49	  Management Engine, primarily for cpufreq. Say Y here if you want
50	  to use the PL320 IPCM support.
51
52config ARMADA_37XX_RWTM_MBOX
53	tristate "Armada 37xx rWTM BIU Mailbox"
54	depends on ARCH_MVEBU || COMPILE_TEST
55	depends on OF
56	help
57	  Mailbox implementation for communication with the the firmware
58	  running on the Cortex-M3 rWTM secure processor of the Armada 37xx
59	  SOC. Say Y here if you are building for such a device (for example
60	  the Turris Mox router).
61
62config OMAP2PLUS_MBOX
63	tristate "OMAP2+ Mailbox framework support"
64	depends on ARCH_OMAP2PLUS || ARCH_K3
65	help
66	  Mailbox implementation for OMAP family chips with hardware for
67	  interprocessor communication involving DSP, IVA1.0 and IVA2 in
68	  OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
69	  want to use OMAP2+ Mailbox framework support.
70
71config OMAP_MBOX_KFIFO_SIZE
72	int "Mailbox kfifo default buffer size (bytes)"
73	depends on OMAP2PLUS_MBOX
74	default 256
75	help
76	  Specify the default size of mailbox's kfifo buffers (bytes).
77	  This can also be changed at runtime (via the mbox_kfifo_size
78	  module parameter).
79
80config ROCKCHIP_MBOX
81	bool "Rockchip Soc Integrated Mailbox Support"
82	depends on ARCH_ROCKCHIP || COMPILE_TEST
83	help
84	  This driver provides support for inter-processor communication
85	  between CPU cores and MCU processor on Some Rockchip SOCs.
86	  Please check it that the Soc you use have Mailbox hardware.
87	  Say Y here if you want to use the Rockchip Mailbox support.
88
89config PCC
90	bool "Platform Communication Channel Driver"
91	depends on ACPI
92	default n
93	help
94	  ACPI 5.0+ spec defines a generic mode of communication
95	  between the OS and a platform such as the BMC. This medium
96	  (PCC) is typically used by CPPC (ACPI CPU Performance management),
97	  RAS (ACPI reliability protocol) and MPST (ACPI Memory power
98	  states). Select this driver if your platform implements the
99	  PCC clients mentioned above.
100
101config ALTERA_MBOX
102	tristate "Altera Mailbox"
103	depends on HAS_IOMEM
104	help
105	  An implementation of the Altera Mailbox soft core. It is used
106	  to send message between processors. Say Y here if you want to use the
107	  Altera mailbox support.
108
109config BCM2835_MBOX
110	tristate "BCM2835 Mailbox"
111	depends on ARCH_BCM2835
112	help
113	  An implementation of the BCM2385 Mailbox.  It is used to invoke
114	  the services of the Videocore. Say Y here if you want to use the
115	  BCM2835 Mailbox.
116
117config STI_MBOX
118	tristate "STI Mailbox framework support"
119	depends on ARCH_STI && OF
120	help
121	  Mailbox implementation for STMicroelectonics family chips with
122	  hardware for interprocessor communication.
123
124config TI_MESSAGE_MANAGER
125	tristate "Texas Instruments Message Manager Driver"
126	depends on ARCH_KEYSTONE || ARCH_K3
127	default ARCH_K3
128	help
129	  An implementation of Message Manager slave driver for Keystone
130	  and K3 architecture SoCs from Texas Instruments. Message Manager
131	  is a communication entity found on few of Texas Instrument's keystone
132	  and K3 architecture SoCs. These may be used for communication between
133	  multiple processors within the SoC. Select this driver if your
134	  platform has support for the hardware block.
135
136config HI3660_MBOX
137	tristate "Hi3660 Mailbox" if EXPERT
138	depends on (ARCH_HISI || COMPILE_TEST)
139	depends on OF
140	default ARCH_HISI
141	help
142	  An implementation of the hi3660 mailbox. It is used to send message
143	  between application processors and other processors/MCU/DSP. Select
144	  Y here if you want to use Hi3660 mailbox controller.
145
146config HI6220_MBOX
147	tristate "Hi6220 Mailbox" if EXPERT
148	depends on (ARCH_HISI || COMPILE_TEST)
149	depends on OF
150	default ARCH_HISI
151	help
152	  An implementation of the hi6220 mailbox. It is used to send message
153	  between application processors and MCU. Say Y here if you want to
154	  build Hi6220 mailbox controller driver.
155
156config MAILBOX_TEST
157	tristate "Mailbox Test Client"
158	depends on OF
159	depends on HAS_IOMEM
160	help
161	  Test client to help with testing new Controller driver
162	  implementations.
163
164config POLARFIRE_SOC_MAILBOX
165	tristate "PolarFire SoC (MPFS) Mailbox"
166	depends on HAS_IOMEM
167	depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST
168	help
169	  This driver adds support for the PolarFire SoC (MPFS) mailbox controller.
170
171	  To compile this driver as a module, choose M here. the
172	  module will be called mailbox-mpfs.
173
174	  If unsure, say N.
175
176config QCOM_APCS_IPC
177	tristate "Qualcomm APCS IPC driver"
178	depends on ARCH_QCOM || COMPILE_TEST
179	help
180	  Say y here to enable support for the APCS IPC mailbox driver,
181	  providing an interface for invoking the inter-process communication
182	  signals from the application processor to other masters.
183
184config TEGRA_HSP_MBOX
185	bool "Tegra HSP (Hardware Synchronization Primitives) Driver"
186	depends on ARCH_TEGRA
187	help
188	  The Tegra HSP driver is used for the interprocessor communication
189	  between different remote processors and host processors on Tegra186
190	  and later SoCs. Say Y here if you want to have this support.
191	  If unsure say N.
192
193config XGENE_SLIMPRO_MBOX
194	tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
195	depends on ARCH_XGENE
196	help
197	  An implementation of the APM X-Gene Interprocessor Communication
198	  Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller.
199	  It is used to send short messages between ARM64-bit cores and
200	  the SLIMpro Management Engine, primarily for PM. Say Y here if you
201	  want to use the APM X-Gene SLIMpro IPCM support.
202
203config BCM_PDC_MBOX
204	tristate "Broadcom FlexSparx DMA Mailbox"
205	depends on ARCH_BCM_IPROC || COMPILE_TEST
206	help
207	  Mailbox implementation for the Broadcom FlexSparx DMA ring manager,
208	  which provides access to various offload engines on Broadcom
209	  SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2.
210
211config BCM_FLEXRM_MBOX
212	tristate "Broadcom FlexRM Mailbox"
213	depends on ARM64
214	depends on ARCH_BCM_IPROC || COMPILE_TEST
215	select GENERIC_MSI_IRQ
216	default m if ARCH_BCM_IPROC
217	help
218	  Mailbox implementation of the Broadcom FlexRM ring manager,
219	  which provides access to various offload engines on Broadcom
220	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
221
222config STM32_IPCC
223	tristate "STM32 IPCC Mailbox"
224	depends on MACH_STM32MP157 || COMPILE_TEST
225	help
226	  Mailbox implementation for STMicroelectonics STM32 family chips
227	  with hardware for Inter-Processor Communication Controller (IPCC)
228	  between processors. Say Y here if you want to have this support.
229
230config MTK_ADSP_MBOX
231	tristate "MediaTek ADSP Mailbox Controller"
232	depends on ARCH_MEDIATEK || COMPILE_TEST
233	help
234          Say yes here to add support for "MediaTek ADSP Mailbox Controller.
235          This mailbox driver is used to send notification or short message
236          between processors with ADSP. It will place the message to share
237	  buffer and will access the ipc control.
238
239config MTK_CMDQ_MBOX
240	tristate "MediaTek CMDQ Mailbox Support"
241	depends on ARCH_MEDIATEK || COMPILE_TEST
242	select MTK_INFRACFG
243	help
244	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
245	  mailbox driver. The CMDQ is used to help read/write registers with
246	  critical time limitation, such as updating display configuration
247	  during the vblank.
248
249config ZYNQMP_IPI_MBOX
250	tristate "Xilinx ZynqMP IPI Mailbox"
251	depends on ARCH_ZYNQMP && OF
252	help
253	  Say yes here to add support for Xilinx IPI mailbox driver.
254	  This mailbox driver is used to send notification or short message
255	  between processors with Xilinx ZynqMP IPI. It will place the
256	  message to the IPI buffer and will access the IPI control
257	  registers to kick the other processor or enquire status.
258
259config SUN6I_MSGBOX
260	tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box"
261	depends on ARCH_SUNXI || COMPILE_TEST
262	default ARCH_SUNXI
263	help
264	  Mailbox implementation for the hardware message box present in
265	  various Allwinner SoCs. This mailbox is used for communication
266	  between the application CPUs and the power management coprocessor.
267
268config SPRD_MBOX
269	tristate "Spreadtrum Mailbox"
270	depends on ARCH_SPRD || COMPILE_TEST
271	help
272	  Mailbox driver implementation for the Spreadtrum platform. It is used
273	  to send message between application processors and MCU. Say Y here if
274	  you want to build the Spreatrum mailbox controller driver.
275
276config QCOM_IPCC
277	tristate "Qualcomm Technologies, Inc. IPCC driver"
278	depends on ARCH_QCOM || COMPILE_TEST
279	help
280	  Qualcomm Technologies, Inc. Inter-Processor Communication Controller
281	  (IPCC) driver for MSM devices. The driver provides mailbox support for
282	  sending interrupts to the clients. On the other hand, the driver also
283	  acts as an interrupt controller for receiving interrupts from clients.
284	  Say Y here if you want to build this driver.
285
286endif
287