xref: /linux/drivers/mailbox/Kconfig (revision 4b132aacb0768ac1e652cf517097ea6f237214b9)
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig MAILBOX
3	bool "Mailbox Hardware Support"
4	help
5	  Mailbox is a framework to control hardware communication between
6	  on-chip processors through queued messages and interrupt driven
7	  signals. Say Y if your platform supports hardware mailboxes.
8
9if MAILBOX
10
11config ARM_MHU
12	tristate "ARM MHU Mailbox"
13	depends on ARM_AMBA
14	help
15	  Say Y here if you want to build the ARM MHU controller driver.
16	  The controller has 3 mailbox channels, the last of which can be
17	  used in Secure mode only.
18
19config ARM_MHU_V2
20	tristate "ARM MHUv2 Mailbox"
21	depends on ARM_AMBA
22	help
23	  Say Y here if you want to build the ARM MHUv2 controller driver,
24	  which provides unidirectional mailboxes between processing elements.
25
26config ARM_MHU_V3
27	tristate "ARM MHUv3 Mailbox"
28	depends on HAS_IOMEM || COMPILE_TEST
29	depends on OF
30	help
31	  Say Y here if you want to build the ARM MHUv3 controller driver,
32	  which provides unidirectional mailboxes between processing elements.
33
34	  ARM MHUv3 controllers can implement a varying number of extensions
35	  that provides different means of transports: supported extensions
36	  will be discovered and possibly managed at probe-time.
37
38config IMX_MBOX
39	tristate "i.MX Mailbox"
40	depends on ARCH_MXC || COMPILE_TEST
41	help
42	  Mailbox implementation for i.MX Messaging Unit (MU).
43
44config PLATFORM_MHU
45	tristate "Platform MHU Mailbox"
46	depends on OF
47	depends on HAS_IOMEM
48	help
49	  Say Y here if you want to build a platform specific variant MHU
50	  controller driver.
51	  The controller has a maximum of 3 mailbox channels, the last of
52	  which can be used in Secure mode only.
53
54config PL320_MBOX
55	bool "ARM PL320 Mailbox"
56	depends on ARM_AMBA
57	help
58	  An implementation of the ARM PL320 Interprocessor Communication
59	  Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to
60	  send short messages between Highbank's A9 cores and the EnergyCore
61	  Management Engine, primarily for cpufreq. Say Y here if you want
62	  to use the PL320 IPCM support.
63
64config ARMADA_37XX_RWTM_MBOX
65	tristate "Armada 37xx rWTM BIU Mailbox"
66	depends on ARCH_MVEBU || COMPILE_TEST
67	depends on OF
68	help
69	  Mailbox implementation for communication with the the firmware
70	  running on the Cortex-M3 rWTM secure processor of the Armada 37xx
71	  SOC. Say Y here if you are building for such a device (for example
72	  the Turris Mox router).
73
74config OMAP2PLUS_MBOX
75	tristate "OMAP2+ Mailbox framework support"
76	depends on ARCH_OMAP2PLUS || ARCH_K3
77	help
78	  Mailbox implementation for OMAP family chips with hardware for
79	  interprocessor communication involving DSP, IVA1.0 and IVA2 in
80	  OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
81	  want to use OMAP2+ Mailbox framework support.
82
83config ROCKCHIP_MBOX
84	bool "Rockchip Soc Integrated Mailbox Support"
85	depends on ARCH_ROCKCHIP || COMPILE_TEST
86	help
87	  This driver provides support for inter-processor communication
88	  between CPU cores and MCU processor on Some Rockchip SOCs.
89	  Please check it that the Soc you use have Mailbox hardware.
90	  Say Y here if you want to use the Rockchip Mailbox support.
91
92config PCC
93	bool "Platform Communication Channel Driver"
94	depends on ACPI
95	default n
96	help
97	  ACPI 5.0+ spec defines a generic mode of communication
98	  between the OS and a platform such as the BMC. This medium
99	  (PCC) is typically used by CPPC (ACPI CPU Performance management),
100	  RAS (ACPI reliability protocol) and MPST (ACPI Memory power
101	  states). Select this driver if your platform implements the
102	  PCC clients mentioned above.
103
104config ALTERA_MBOX
105	tristate "Altera Mailbox"
106	depends on HAS_IOMEM
107	help
108	  An implementation of the Altera Mailbox soft core. It is used
109	  to send message between processors. Say Y here if you want to use the
110	  Altera mailbox support.
111
112config BCM2835_MBOX
113	tristate "BCM2835 Mailbox"
114	depends on ARCH_BCM2835
115	help
116	  An implementation of the BCM2385 Mailbox.  It is used to invoke
117	  the services of the Videocore. Say Y here if you want to use the
118	  BCM2835 Mailbox.
119
120config STI_MBOX
121	tristate "STI Mailbox framework support"
122	depends on ARCH_STI && OF
123	help
124	  Mailbox implementation for STMicroelectonics family chips with
125	  hardware for interprocessor communication.
126
127config TI_MESSAGE_MANAGER
128	tristate "Texas Instruments Message Manager Driver"
129	depends on ARCH_KEYSTONE || ARCH_K3
130	default ARCH_K3
131	help
132	  An implementation of Message Manager slave driver for Keystone
133	  and K3 architecture SoCs from Texas Instruments. Message Manager
134	  is a communication entity found on few of Texas Instrument's keystone
135	  and K3 architecture SoCs. These may be used for communication between
136	  multiple processors within the SoC. Select this driver if your
137	  platform has support for the hardware block.
138
139config HI3660_MBOX
140	tristate "Hi3660 Mailbox" if EXPERT
141	depends on (ARCH_HISI || COMPILE_TEST)
142	depends on OF
143	default ARCH_HISI
144	help
145	  An implementation of the hi3660 mailbox. It is used to send message
146	  between application processors and other processors/MCU/DSP. Select
147	  Y here if you want to use Hi3660 mailbox controller.
148
149config HI6220_MBOX
150	tristate "Hi6220 Mailbox" if EXPERT
151	depends on (ARCH_HISI || COMPILE_TEST)
152	depends on OF
153	default ARCH_HISI
154	help
155	  An implementation of the hi6220 mailbox. It is used to send message
156	  between application processors and MCU. Say Y here if you want to
157	  build Hi6220 mailbox controller driver.
158
159config MAILBOX_TEST
160	tristate "Mailbox Test Client"
161	depends on OF
162	depends on HAS_IOMEM
163	help
164	  Test client to help with testing new Controller driver
165	  implementations.
166
167config POLARFIRE_SOC_MAILBOX
168	tristate "PolarFire SoC (MPFS) Mailbox"
169	depends on HAS_IOMEM
170	depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST
171	help
172	  This driver adds support for the PolarFire SoC (MPFS) mailbox controller.
173
174	  To compile this driver as a module, choose M here. the
175	  module will be called mailbox-mpfs.
176
177	  If unsure, say N.
178
179config QCOM_APCS_IPC
180	tristate "Qualcomm APCS IPC driver"
181	depends on ARCH_QCOM || COMPILE_TEST
182	help
183	  Say y here to enable support for the APCS IPC mailbox driver,
184	  providing an interface for invoking the inter-process communication
185	  signals from the application processor to other masters.
186
187config TEGRA_HSP_MBOX
188	bool "Tegra HSP (Hardware Synchronization Primitives) Driver"
189	depends on ARCH_TEGRA
190	help
191	  The Tegra HSP driver is used for the interprocessor communication
192	  between different remote processors and host processors on Tegra186
193	  and later SoCs. Say Y here if you want to have this support.
194	  If unsure say N.
195
196config XGENE_SLIMPRO_MBOX
197	tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
198	depends on ARCH_XGENE
199	help
200	  An implementation of the APM X-Gene Interprocessor Communication
201	  Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller.
202	  It is used to send short messages between ARM64-bit cores and
203	  the SLIMpro Management Engine, primarily for PM. Say Y here if you
204	  want to use the APM X-Gene SLIMpro IPCM support.
205
206config BCM_PDC_MBOX
207	tristate "Broadcom FlexSparx DMA Mailbox"
208	depends on ARCH_BCM_IPROC || COMPILE_TEST
209	help
210	  Mailbox implementation for the Broadcom FlexSparx DMA ring manager,
211	  which provides access to various offload engines on Broadcom
212	  SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2.
213
214config BCM_FLEXRM_MBOX
215	tristate "Broadcom FlexRM Mailbox"
216	depends on ARM64
217	depends on ARCH_BCM_IPROC || COMPILE_TEST
218	select GENERIC_MSI_IRQ
219	default m if ARCH_BCM_IPROC
220	help
221	  Mailbox implementation of the Broadcom FlexRM ring manager,
222	  which provides access to various offload engines on Broadcom
223	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
224
225config STM32_IPCC
226	tristate "STM32 IPCC Mailbox"
227	depends on MACH_STM32MP157 || COMPILE_TEST
228	help
229	  Mailbox implementation for STMicroelectonics STM32 family chips
230	  with hardware for Inter-Processor Communication Controller (IPCC)
231	  between processors. Say Y here if you want to have this support.
232
233config MTK_ADSP_MBOX
234	tristate "MediaTek ADSP Mailbox Controller"
235	depends on ARCH_MEDIATEK || COMPILE_TEST
236	help
237          Say yes here to add support for "MediaTek ADSP Mailbox Controller.
238          This mailbox driver is used to send notification or short message
239          between processors with ADSP. It will place the message to share
240	  buffer and will access the ipc control.
241
242config MTK_CMDQ_MBOX
243	tristate "MediaTek CMDQ Mailbox Support"
244	depends on ARCH_MEDIATEK || COMPILE_TEST
245	select MTK_INFRACFG
246	help
247	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
248	  mailbox driver. The CMDQ is used to help read/write registers with
249	  critical time limitation, such as updating display configuration
250	  during the vblank.
251
252config ZYNQMP_IPI_MBOX
253	tristate "Xilinx ZynqMP IPI Mailbox"
254	depends on ARCH_ZYNQMP && OF
255	help
256	  Say yes here to add support for Xilinx IPI mailbox driver.
257	  This mailbox driver is used to send notification or short message
258	  between processors with Xilinx ZynqMP IPI. It will place the
259	  message to the IPI buffer and will access the IPI control
260	  registers to kick the other processor or enquire status.
261
262config SUN6I_MSGBOX
263	tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box"
264	depends on ARCH_SUNXI || COMPILE_TEST
265	default ARCH_SUNXI
266	help
267	  Mailbox implementation for the hardware message box present in
268	  various Allwinner SoCs. This mailbox is used for communication
269	  between the application CPUs and the power management coprocessor.
270
271config SPRD_MBOX
272	tristate "Spreadtrum Mailbox"
273	depends on ARCH_SPRD || COMPILE_TEST
274	help
275	  Mailbox driver implementation for the Spreadtrum platform. It is used
276	  to send message between application processors and MCU. Say Y here if
277	  you want to build the Spreatrum mailbox controller driver.
278
279config QCOM_CPUCP_MBOX
280	tristate "Qualcomm Technologies, Inc. CPUCP mailbox driver"
281	depends on (ARCH_QCOM || COMPILE_TEST) && 64BIT
282	help
283	  Qualcomm Technologies, Inc. CPUSS Control Processor (CPUCP) mailbox
284	  controller driver enables communication between AP and CPUCP. Say
285	  Y here if you want to build this driver.
286
287config QCOM_IPCC
288	tristate "Qualcomm Technologies, Inc. IPCC driver"
289	depends on ARCH_QCOM || COMPILE_TEST
290	help
291	  Qualcomm Technologies, Inc. Inter-Processor Communication Controller
292	  (IPCC) driver for MSM devices. The driver provides mailbox support for
293	  sending interrupts to the clients. On the other hand, the driver also
294	  acts as an interrupt controller for receiving interrupts from clients.
295	  Say Y here if you want to build this driver.
296
297endif
298