xref: /linux/drivers/mailbox/Kconfig (revision e7ed343658792771cf1b868df061661b7bcc5cef)
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig MAILBOX
3	bool "Mailbox Hardware Support"
4	help
5	  Mailbox is a framework to control hardware communication between
6	  on-chip processors through queued messages and interrupt driven
7	  signals. Say Y if your platform supports hardware mailboxes.
8
9if MAILBOX
10
11config ARM_MHU
12	tristate "ARM MHU Mailbox"
13	depends on ARM_AMBA
14	help
15	  Say Y here if you want to build the ARM MHU controller driver.
16	  The controller has 3 mailbox channels, the last of which can be
17	  used in Secure mode only.
18
19config ARM_MHU_V2
20	tristate "ARM MHUv2 Mailbox"
21	depends on ARM_AMBA
22	help
23	  Say Y here if you want to build the ARM MHUv2 controller driver,
24	  which provides unidirectional mailboxes between processing elements.
25
26config ARM_MHU_V3
27	tristate "ARM MHUv3 Mailbox"
28	depends on ARM64 || COMPILE_TEST
29	depends on HAS_IOMEM || COMPILE_TEST
30	depends on OF
31	help
32	  Say Y here if you want to build the ARM MHUv3 controller driver,
33	  which provides unidirectional mailboxes between processing elements.
34
35	  ARM MHUv3 controllers can implement a varying number of extensions
36	  that provides different means of transports: supported extensions
37	  will be discovered and possibly managed at probe-time.
38
39config IMX_MBOX
40	tristate "i.MX Mailbox"
41	depends on ARCH_MXC || COMPILE_TEST
42	help
43	  Mailbox implementation for i.MX Messaging Unit (MU).
44
45config PLATFORM_MHU
46	tristate "Platform MHU Mailbox"
47	depends on OF
48	depends on HAS_IOMEM
49	help
50	  Say Y here if you want to build a platform specific variant MHU
51	  controller driver.
52	  The controller has a maximum of 3 mailbox channels, the last of
53	  which can be used in Secure mode only.
54
55config PL320_MBOX
56	bool "ARM PL320 Mailbox"
57	depends on ARM_AMBA
58	help
59	  An implementation of the ARM PL320 Interprocessor Communication
60	  Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to
61	  send short messages between Highbank's A9 cores and the EnergyCore
62	  Management Engine, primarily for cpufreq. Say Y here if you want
63	  to use the PL320 IPCM support.
64
65config ARMADA_37XX_RWTM_MBOX
66	tristate "Armada 37xx rWTM BIU Mailbox"
67	depends on ARCH_MVEBU || COMPILE_TEST
68	depends on OF
69	help
70	  Mailbox implementation for communication with the the firmware
71	  running on the Cortex-M3 rWTM secure processor of the Armada 37xx
72	  SOC. Say Y here if you are building for such a device (for example
73	  the Turris Mox router).
74
75config OMAP2PLUS_MBOX
76	tristate "OMAP2+ Mailbox framework support"
77	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
78	help
79	  Mailbox implementation for OMAP family chips with hardware for
80	  interprocessor communication involving DSP, IVA1.0 and IVA2 in
81	  OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
82	  want to use OMAP2+ Mailbox framework support.
83
84config ROCKCHIP_MBOX
85	bool "Rockchip Soc Integrated Mailbox Support"
86	depends on ARCH_ROCKCHIP || COMPILE_TEST
87	help
88	  This driver provides support for inter-processor communication
89	  between CPU cores and MCU processor on Some Rockchip SOCs.
90	  Please check it that the Soc you use have Mailbox hardware.
91	  Say Y here if you want to use the Rockchip Mailbox support.
92
93config PCC
94	bool "Platform Communication Channel Driver"
95	depends on ACPI
96	default n
97	help
98	  ACPI 5.0+ spec defines a generic mode of communication
99	  between the OS and a platform such as the BMC. This medium
100	  (PCC) is typically used by CPPC (ACPI CPU Performance management),
101	  RAS (ACPI reliability protocol) and MPST (ACPI Memory power
102	  states). Select this driver if your platform implements the
103	  PCC clients mentioned above.
104
105config ALTERA_MBOX
106	tristate "Altera Mailbox"
107	depends on HAS_IOMEM
108	help
109	  An implementation of the Altera Mailbox soft core. It is used
110	  to send message between processors. Say Y here if you want to use the
111	  Altera mailbox support.
112
113config BCM2835_MBOX
114	tristate "BCM2835 Mailbox"
115	depends on ARCH_BCM2835
116	help
117	  An implementation of the BCM2385 Mailbox.  It is used to invoke
118	  the services of the Videocore. Say Y here if you want to use the
119	  BCM2835 Mailbox.
120
121config STI_MBOX
122	tristate "STI Mailbox framework support"
123	depends on ARCH_STI && OF
124	help
125	  Mailbox implementation for STMicroelectonics family chips with
126	  hardware for interprocessor communication.
127
128config TI_MESSAGE_MANAGER
129	tristate "Texas Instruments Message Manager Driver"
130	depends on ARCH_KEYSTONE || ARCH_K3
131	default ARCH_K3
132	help
133	  An implementation of Message Manager slave driver for Keystone
134	  and K3 architecture SoCs from Texas Instruments. Message Manager
135	  is a communication entity found on few of Texas Instrument's keystone
136	  and K3 architecture SoCs. These may be used for communication between
137	  multiple processors within the SoC. Select this driver if your
138	  platform has support for the hardware block.
139
140config HI3660_MBOX
141	tristate "Hi3660 Mailbox" if EXPERT
142	depends on (ARCH_HISI || COMPILE_TEST)
143	depends on OF
144	default ARCH_HISI
145	help
146	  An implementation of the hi3660 mailbox. It is used to send message
147	  between application processors and other processors/MCU/DSP. Select
148	  Y here if you want to use Hi3660 mailbox controller.
149
150config HI6220_MBOX
151	tristate "Hi6220 Mailbox" if EXPERT
152	depends on (ARCH_HISI || COMPILE_TEST)
153	depends on OF
154	default ARCH_HISI
155	help
156	  An implementation of the hi6220 mailbox. It is used to send message
157	  between application processors and MCU. Say Y here if you want to
158	  build Hi6220 mailbox controller driver.
159
160config MAILBOX_TEST
161	tristate "Mailbox Test Client"
162	depends on OF
163	depends on HAS_IOMEM
164	help
165	  Test client to help with testing new Controller driver
166	  implementations.
167
168config POLARFIRE_SOC_MAILBOX
169	tristate "PolarFire SoC (MPFS) Mailbox"
170	depends on HAS_IOMEM
171	depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST
172	help
173	  This driver adds support for the PolarFire SoC (MPFS) mailbox controller.
174
175	  To compile this driver as a module, choose M here. the
176	  module will be called mailbox-mpfs.
177
178	  If unsure, say N.
179
180config QCOM_APCS_IPC
181	tristate "Qualcomm APCS IPC driver"
182	depends on ARCH_QCOM || COMPILE_TEST
183	help
184	  Say y here to enable support for the APCS IPC mailbox driver,
185	  providing an interface for invoking the inter-process communication
186	  signals from the application processor to other masters.
187
188config TEGRA_HSP_MBOX
189	bool "Tegra HSP (Hardware Synchronization Primitives) Driver"
190	depends on ARCH_TEGRA
191	help
192	  The Tegra HSP driver is used for the interprocessor communication
193	  between different remote processors and host processors on Tegra186
194	  and later SoCs. Say Y here if you want to have this support.
195	  If unsure say N.
196
197config XGENE_SLIMPRO_MBOX
198	tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
199	depends on ARCH_XGENE
200	help
201	  An implementation of the APM X-Gene Interprocessor Communication
202	  Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller.
203	  It is used to send short messages between ARM64-bit cores and
204	  the SLIMpro Management Engine, primarily for PM. Say Y here if you
205	  want to use the APM X-Gene SLIMpro IPCM support.
206
207config BCM_PDC_MBOX
208	tristate "Broadcom FlexSparx DMA Mailbox"
209	depends on ARCH_BCM_IPROC || COMPILE_TEST
210	help
211	  Mailbox implementation for the Broadcom FlexSparx DMA ring manager,
212	  which provides access to various offload engines on Broadcom
213	  SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2.
214
215config BCM_FLEXRM_MBOX
216	tristate "Broadcom FlexRM Mailbox"
217	depends on ARM64
218	depends on ARCH_BCM_IPROC || COMPILE_TEST
219	select GENERIC_MSI_IRQ
220	default m if ARCH_BCM_IPROC
221	help
222	  Mailbox implementation of the Broadcom FlexRM ring manager,
223	  which provides access to various offload engines on Broadcom
224	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
225
226config STM32_IPCC
227	tristate "STM32 IPCC Mailbox"
228	depends on MACH_STM32MP157 || COMPILE_TEST
229	help
230	  Mailbox implementation for STMicroelectonics STM32 family chips
231	  with hardware for Inter-Processor Communication Controller (IPCC)
232	  between processors. Say Y here if you want to have this support.
233
234config MTK_ADSP_MBOX
235	tristate "MediaTek ADSP Mailbox Controller"
236	depends on ARCH_MEDIATEK || COMPILE_TEST
237	help
238          Say yes here to add support for "MediaTek ADSP Mailbox Controller.
239          This mailbox driver is used to send notification or short message
240          between processors with ADSP. It will place the message to share
241	  buffer and will access the ipc control.
242
243config MTK_CMDQ_MBOX
244	tristate "MediaTek CMDQ Mailbox Support"
245	depends on ARCH_MEDIATEK || COMPILE_TEST
246	select MTK_INFRACFG
247	help
248	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
249	  mailbox driver. The CMDQ is used to help read/write registers with
250	  critical time limitation, such as updating display configuration
251	  during the vblank.
252
253config ZYNQMP_IPI_MBOX
254	tristate "Xilinx ZynqMP IPI Mailbox"
255	depends on ARCH_ZYNQMP && OF
256	help
257	  Say yes here to add support for Xilinx IPI mailbox driver.
258	  This mailbox driver is used to send notification or short message
259	  between processors with Xilinx ZynqMP IPI. It will place the
260	  message to the IPI buffer and will access the IPI control
261	  registers to kick the other processor or enquire status.
262
263config SUN6I_MSGBOX
264	tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box"
265	depends on ARCH_SUNXI || COMPILE_TEST
266	default ARCH_SUNXI
267	help
268	  Mailbox implementation for the hardware message box present in
269	  various Allwinner SoCs. This mailbox is used for communication
270	  between the application CPUs and the power management coprocessor.
271
272config SPRD_MBOX
273	tristate "Spreadtrum Mailbox"
274	depends on ARCH_SPRD || COMPILE_TEST
275	help
276	  Mailbox driver implementation for the Spreadtrum platform. It is used
277	  to send message between application processors and MCU. Say Y here if
278	  you want to build the Spreatrum mailbox controller driver.
279
280config QCOM_CPUCP_MBOX
281	tristate "Qualcomm Technologies, Inc. CPUCP mailbox driver"
282	depends on (ARCH_QCOM || COMPILE_TEST) && 64BIT
283	help
284	  Qualcomm Technologies, Inc. CPUSS Control Processor (CPUCP) mailbox
285	  controller driver enables communication between AP and CPUCP. Say
286	  Y here if you want to build this driver.
287
288config QCOM_IPCC
289	tristate "Qualcomm Technologies, Inc. IPCC driver"
290	depends on ARCH_QCOM || COMPILE_TEST
291	help
292	  Qualcomm Technologies, Inc. Inter-Processor Communication Controller
293	  (IPCC) driver for MSM devices. The driver provides mailbox support for
294	  sending interrupts to the clients. On the other hand, the driver also
295	  acts as an interrupt controller for receiving interrupts from clients.
296	  Say Y here if you want to build this driver.
297
298endif
299