1# SPDX-License-Identifier: GPL-2.0-only 2menu "IRQ chip support" 3 4config IRQCHIP 5 def_bool y 6 depends on OF_IRQ 7 8config ARM_GIC 9 bool 10 select IRQ_DOMAIN_HIERARCHY 11 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 12 13config ARM_GIC_PM 14 bool 15 depends on PM 16 select ARM_GIC 17 18config ARM_GIC_MAX_NR 19 int 20 depends on ARM_GIC 21 default 2 if ARCH_REALVIEW 22 default 1 23 24config ARM_GIC_V2M 25 bool 26 depends on PCI 27 select ARM_GIC 28 select PCI_MSI 29 30config GIC_NON_BANKED 31 bool 32 33config ARM_GIC_V3 34 bool 35 select IRQ_DOMAIN_HIERARCHY 36 select PARTITION_PERCPU 37 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 38 39config ARM_GIC_V3_ITS 40 bool 41 select GENERIC_MSI_IRQ_DOMAIN 42 default ARM_GIC_V3 43 44config ARM_GIC_V3_ITS_PCI 45 bool 46 depends on ARM_GIC_V3_ITS 47 depends on PCI 48 depends on PCI_MSI 49 default ARM_GIC_V3_ITS 50 51config ARM_GIC_V3_ITS_FSL_MC 52 bool 53 depends on ARM_GIC_V3_ITS 54 depends on FSL_MC_BUS 55 default ARM_GIC_V3_ITS 56 57config ARM_NVIC 58 bool 59 select IRQ_DOMAIN_HIERARCHY 60 select GENERIC_IRQ_CHIP 61 62config ARM_VIC 63 bool 64 select IRQ_DOMAIN 65 66config ARM_VIC_NR 67 int 68 default 4 if ARCH_S5PV210 69 default 2 70 depends on ARM_VIC 71 help 72 The maximum number of VICs available in the system, for 73 power management. 74 75config ARMADA_370_XP_IRQ 76 bool 77 select GENERIC_IRQ_CHIP 78 select PCI_MSI if PCI 79 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 80 81config ALPINE_MSI 82 bool 83 depends on PCI 84 select PCI_MSI 85 select GENERIC_IRQ_CHIP 86 87config AL_FIC 88 bool "Amazon's Annapurna Labs Fabric Interrupt Controller" 89 depends on OF || COMPILE_TEST 90 select GENERIC_IRQ_CHIP 91 select IRQ_DOMAIN 92 help 93 Support Amazon's Annapurna Labs Fabric Interrupt Controller. 94 95config ATMEL_AIC_IRQ 96 bool 97 select GENERIC_IRQ_CHIP 98 select IRQ_DOMAIN 99 select SPARSE_IRQ 100 101config ATMEL_AIC5_IRQ 102 bool 103 select GENERIC_IRQ_CHIP 104 select IRQ_DOMAIN 105 select SPARSE_IRQ 106 107config I8259 108 bool 109 select IRQ_DOMAIN 110 111config BCM6345_L1_IRQ 112 bool 113 select GENERIC_IRQ_CHIP 114 select IRQ_DOMAIN 115 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 116 117config BCM7038_L1_IRQ 118 tristate "Broadcom STB 7038-style L1/L2 interrupt controller driver" 119 depends on ARCH_BRCMSTB || BMIPS_GENERIC 120 default ARCH_BRCMSTB || BMIPS_GENERIC 121 select GENERIC_IRQ_CHIP 122 select IRQ_DOMAIN 123 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 124 125config BCM7120_L2_IRQ 126 tristate "Broadcom STB 7120-style L2 interrupt controller driver" 127 depends on ARCH_BRCMSTB || BMIPS_GENERIC 128 default ARCH_BRCMSTB || BMIPS_GENERIC 129 select GENERIC_IRQ_CHIP 130 select IRQ_DOMAIN 131 132config BRCMSTB_L2_IRQ 133 tristate "Broadcom STB generic L2 interrupt controller driver" 134 depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC 135 default ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC 136 select GENERIC_IRQ_CHIP 137 select IRQ_DOMAIN 138 139config DAVINCI_AINTC 140 bool 141 select GENERIC_IRQ_CHIP 142 select IRQ_DOMAIN 143 144config DAVINCI_CP_INTC 145 bool 146 select GENERIC_IRQ_CHIP 147 select IRQ_DOMAIN 148 149config DW_APB_ICTL 150 bool 151 select GENERIC_IRQ_CHIP 152 select IRQ_DOMAIN_HIERARCHY 153 154config FARADAY_FTINTC010 155 bool 156 select IRQ_DOMAIN 157 select SPARSE_IRQ 158 159config HISILICON_IRQ_MBIGEN 160 bool 161 select ARM_GIC_V3 162 select ARM_GIC_V3_ITS 163 164config IMGPDC_IRQ 165 bool 166 select GENERIC_IRQ_CHIP 167 select IRQ_DOMAIN 168 169config IXP4XX_IRQ 170 bool 171 select IRQ_DOMAIN 172 select SPARSE_IRQ 173 174config MADERA_IRQ 175 tristate 176 177config IRQ_MIPS_CPU 178 bool 179 select GENERIC_IRQ_CHIP 180 select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING 181 select IRQ_DOMAIN 182 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 183 184config CLPS711X_IRQCHIP 185 bool 186 depends on ARCH_CLPS711X 187 select IRQ_DOMAIN 188 select SPARSE_IRQ 189 default y 190 191config OMPIC 192 bool 193 194config OR1K_PIC 195 bool 196 select IRQ_DOMAIN 197 198config OMAP_IRQCHIP 199 bool 200 select GENERIC_IRQ_CHIP 201 select IRQ_DOMAIN 202 203config ORION_IRQCHIP 204 bool 205 select IRQ_DOMAIN 206 207config PIC32_EVIC 208 bool 209 select GENERIC_IRQ_CHIP 210 select IRQ_DOMAIN 211 212config JCORE_AIC 213 bool "J-Core integrated AIC" if COMPILE_TEST 214 depends on OF 215 select IRQ_DOMAIN 216 help 217 Support for the J-Core integrated AIC. 218 219config RDA_INTC 220 bool 221 select IRQ_DOMAIN 222 223config RENESAS_INTC_IRQPIN 224 bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST 225 select IRQ_DOMAIN 226 help 227 Enable support for the Renesas Interrupt Controller for external 228 interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs. 229 230config RENESAS_IRQC 231 bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST 232 select GENERIC_IRQ_CHIP 233 select IRQ_DOMAIN 234 help 235 Enable support for the Renesas Interrupt Controller for external 236 devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs. 237 238config RENESAS_RZA1_IRQC 239 bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST 240 select IRQ_DOMAIN_HIERARCHY 241 help 242 Enable support for the Renesas RZ/A1 Interrupt Controller, to use up 243 to 8 external interrupts with configurable sense select. 244 245config SL28CPLD_INTC 246 bool "Kontron sl28cpld IRQ controller" 247 depends on MFD_SL28CPLD=y || COMPILE_TEST 248 select REGMAP_IRQ 249 help 250 Interrupt controller driver for the board management controller 251 found on the Kontron sl28 CPLD. 252 253config ST_IRQCHIP 254 bool 255 select REGMAP 256 select MFD_SYSCON 257 help 258 Enables SysCfg Controlled IRQs on STi based platforms. 259 260config TB10X_IRQC 261 bool 262 select IRQ_DOMAIN 263 select GENERIC_IRQ_CHIP 264 265config TS4800_IRQ 266 tristate "TS-4800 IRQ controller" 267 select IRQ_DOMAIN 268 depends on HAS_IOMEM 269 depends on SOC_IMX51 || COMPILE_TEST 270 help 271 Support for the TS-4800 FPGA IRQ controller 272 273config VERSATILE_FPGA_IRQ 274 bool 275 select IRQ_DOMAIN 276 277config VERSATILE_FPGA_IRQ_NR 278 int 279 default 4 280 depends on VERSATILE_FPGA_IRQ 281 282config XTENSA_MX 283 bool 284 select IRQ_DOMAIN 285 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 286 287config XILINX_INTC 288 bool "Xilinx Interrupt Controller IP" 289 depends on MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP 290 select IRQ_DOMAIN 291 help 292 Support for the Xilinx Interrupt Controller IP core. 293 This is used as a primary controller with MicroBlaze and can also 294 be used as a secondary chained controller on other platforms. 295 296config IRQ_CROSSBAR 297 bool 298 help 299 Support for a CROSSBAR ip that precedes the main interrupt controller. 300 The primary irqchip invokes the crossbar's callback which inturn allocates 301 a free irq and configures the IP. Thus the peripheral interrupts are 302 routed to one of the free irqchip interrupt lines. 303 304config KEYSTONE_IRQ 305 tristate "Keystone 2 IRQ controller IP" 306 depends on ARCH_KEYSTONE 307 help 308 Support for Texas Instruments Keystone 2 IRQ controller IP which 309 is part of the Keystone 2 IPC mechanism 310 311config MIPS_GIC 312 bool 313 select GENERIC_IRQ_IPI 314 select MIPS_CM 315 316config INGENIC_IRQ 317 bool 318 depends on MACH_INGENIC 319 default y 320 321config INGENIC_TCU_IRQ 322 bool "Ingenic JZ47xx TCU interrupt controller" 323 default MACH_INGENIC 324 depends on MIPS || COMPILE_TEST 325 select MFD_SYSCON 326 select GENERIC_IRQ_CHIP 327 help 328 Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic 329 JZ47xx SoCs. 330 331 If unsure, say N. 332 333config RENESAS_H8300H_INTC 334 bool 335 select IRQ_DOMAIN 336 337config RENESAS_H8S_INTC 338 bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST 339 select IRQ_DOMAIN 340 help 341 Enable support for the Renesas H8/300 Interrupt Controller, as found 342 on Renesas H8S SoCs. 343 344config IMX_GPCV2 345 bool 346 select IRQ_DOMAIN 347 help 348 Enables the wakeup IRQs for IMX platforms with GPCv2 block 349 350config IRQ_MXS 351 def_bool y if MACH_ASM9260 || ARCH_MXS 352 select IRQ_DOMAIN 353 select STMP_DEVICE 354 355config MSCC_OCELOT_IRQ 356 bool 357 select IRQ_DOMAIN 358 select GENERIC_IRQ_CHIP 359 360config MVEBU_GICP 361 bool 362 363config MVEBU_ICU 364 bool 365 366config MVEBU_ODMI 367 bool 368 select GENERIC_MSI_IRQ_DOMAIN 369 370config MVEBU_PIC 371 bool 372 373config MVEBU_SEI 374 bool 375 376config LS_EXTIRQ 377 def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE 378 select MFD_SYSCON 379 380config LS_SCFG_MSI 381 def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE 382 depends on PCI && PCI_MSI 383 384config PARTITION_PERCPU 385 bool 386 387config STM32_EXTI 388 bool 389 select IRQ_DOMAIN 390 select GENERIC_IRQ_CHIP 391 392config QCOM_IRQ_COMBINER 393 bool "QCOM IRQ combiner support" 394 depends on ARCH_QCOM && ACPI 395 select IRQ_DOMAIN_HIERARCHY 396 help 397 Say yes here to add support for the IRQ combiner devices embedded 398 in Qualcomm Technologies chips. 399 400config IRQ_UNIPHIER_AIDET 401 bool "UniPhier AIDET support" if COMPILE_TEST 402 depends on ARCH_UNIPHIER || COMPILE_TEST 403 default ARCH_UNIPHIER 404 select IRQ_DOMAIN_HIERARCHY 405 help 406 Support for the UniPhier AIDET (ARM Interrupt Detector). 407 408config MESON_IRQ_GPIO 409 tristate "Meson GPIO Interrupt Multiplexer" 410 depends on ARCH_MESON || COMPILE_TEST 411 default ARCH_MESON 412 select IRQ_DOMAIN_HIERARCHY 413 help 414 Support Meson SoC Family GPIO Interrupt Multiplexer 415 416config GOLDFISH_PIC 417 bool "Goldfish programmable interrupt controller" 418 depends on MIPS && (GOLDFISH || COMPILE_TEST) 419 select GENERIC_IRQ_CHIP 420 select IRQ_DOMAIN 421 help 422 Say yes here to enable Goldfish interrupt controller driver used 423 for Goldfish based virtual platforms. 424 425config QCOM_PDC 426 tristate "QCOM PDC" 427 depends on ARCH_QCOM 428 select IRQ_DOMAIN_HIERARCHY 429 help 430 Power Domain Controller driver to manage and configure wakeup 431 IRQs for Qualcomm Technologies Inc (QTI) mobile chips. 432 433config QCOM_MPM 434 tristate "QCOM MPM" 435 depends on ARCH_QCOM 436 select IRQ_DOMAIN_HIERARCHY 437 help 438 MSM Power Manager driver to manage and configure wakeup 439 IRQs for Qualcomm Technologies Inc (QTI) mobile chips. 440 441config CSKY_MPINTC 442 bool 443 depends on CSKY 444 help 445 Say yes here to enable C-SKY SMP interrupt controller driver used 446 for C-SKY SMP system. 447 In fact it's not mmio map in hardware and it uses ld/st to visit the 448 controller's register inside CPU. 449 450config CSKY_APB_INTC 451 bool "C-SKY APB Interrupt Controller" 452 depends on CSKY 453 help 454 Say yes here to enable C-SKY APB interrupt controller driver used 455 by C-SKY single core SOC system. It uses mmio map apb-bus to visit 456 the controller's register. 457 458config IMX_IRQSTEER 459 bool "i.MX IRQSTEER support" 460 depends on ARCH_MXC || COMPILE_TEST 461 default ARCH_MXC 462 select IRQ_DOMAIN 463 help 464 Support for the i.MX IRQSTEER interrupt multiplexer/remapper. 465 466config IMX_INTMUX 467 bool "i.MX INTMUX support" if COMPILE_TEST 468 default y if ARCH_MXC 469 select IRQ_DOMAIN 470 help 471 Support for the i.MX INTMUX interrupt multiplexer. 472 473config LS1X_IRQ 474 bool "Loongson-1 Interrupt Controller" 475 depends on MACH_LOONGSON32 476 default y 477 select IRQ_DOMAIN 478 select GENERIC_IRQ_CHIP 479 help 480 Support for the Loongson-1 platform Interrupt Controller. 481 482config TI_SCI_INTR_IRQCHIP 483 bool 484 depends on TI_SCI_PROTOCOL 485 select IRQ_DOMAIN_HIERARCHY 486 help 487 This enables the irqchip driver support for K3 Interrupt router 488 over TI System Control Interface available on some new TI's SoCs. 489 If you wish to use interrupt router irq resources managed by the 490 TI System Controller, say Y here. Otherwise, say N. 491 492config TI_SCI_INTA_IRQCHIP 493 bool 494 depends on TI_SCI_PROTOCOL 495 select IRQ_DOMAIN_HIERARCHY 496 select TI_SCI_INTA_MSI_DOMAIN 497 help 498 This enables the irqchip driver support for K3 Interrupt aggregator 499 over TI System Control Interface available on some new TI's SoCs. 500 If you wish to use interrupt aggregator irq resources managed by the 501 TI System Controller, say Y here. Otherwise, say N. 502 503config TI_PRUSS_INTC 504 tristate 505 depends on TI_PRUSS 506 default TI_PRUSS 507 select IRQ_DOMAIN 508 help 509 This enables support for the PRU-ICSS Local Interrupt Controller 510 present within a PRU-ICSS subsystem present on various TI SoCs. 511 The PRUSS INTC enables various interrupts to be routed to multiple 512 different processors within the SoC. 513 514config RISCV_INTC 515 bool "RISC-V Local Interrupt Controller" 516 depends on RISCV 517 default y 518 help 519 This enables support for the per-HART local interrupt controller 520 found in standard RISC-V systems. The per-HART local interrupt 521 controller handles timer interrupts, software interrupts, and 522 hardware interrupts. Without a per-HART local interrupt controller, 523 a RISC-V system will be unable to handle any interrupts. 524 525 If you don't know what to do here, say Y. 526 527config SIFIVE_PLIC 528 bool "SiFive Platform-Level Interrupt Controller" 529 depends on RISCV 530 select IRQ_DOMAIN_HIERARCHY 531 help 532 This enables support for the PLIC chip found in SiFive (and 533 potentially other) RISC-V systems. The PLIC controls devices 534 interrupts and connects them to each core's local interrupt 535 controller. Aside from timer and software interrupts, all other 536 interrupt sources are subordinate to the PLIC. 537 538 If you don't know what to do here, say Y. 539 540config EXYNOS_IRQ_COMBINER 541 bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST 542 depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST 543 help 544 Say yes here to add support for the IRQ combiner devices embedded 545 in Samsung Exynos chips. 546 547config LOONGSON_LIOINTC 548 bool "Loongson Local I/O Interrupt Controller" 549 depends on MACH_LOONGSON64 550 default y 551 select IRQ_DOMAIN 552 select GENERIC_IRQ_CHIP 553 help 554 Support for the Loongson Local I/O Interrupt Controller. 555 556config LOONGSON_HTPIC 557 bool "Loongson3 HyperTransport PIC Controller" 558 depends on MACH_LOONGSON64 559 default y 560 select IRQ_DOMAIN 561 select GENERIC_IRQ_CHIP 562 help 563 Support for the Loongson-3 HyperTransport PIC Controller. 564 565config LOONGSON_HTVEC 566 bool "Loongson3 HyperTransport Interrupt Vector Controller" 567 depends on MACH_LOONGSON64 568 default MACH_LOONGSON64 569 select IRQ_DOMAIN_HIERARCHY 570 help 571 Support for the Loongson3 HyperTransport Interrupt Vector Controller. 572 573config LOONGSON_PCH_PIC 574 bool "Loongson PCH PIC Controller" 575 depends on MACH_LOONGSON64 || COMPILE_TEST 576 default MACH_LOONGSON64 577 select IRQ_DOMAIN_HIERARCHY 578 select IRQ_FASTEOI_HIERARCHY_HANDLERS 579 help 580 Support for the Loongson PCH PIC Controller. 581 582config LOONGSON_PCH_MSI 583 bool "Loongson PCH MSI Controller" 584 depends on MACH_LOONGSON64 || COMPILE_TEST 585 depends on PCI 586 default MACH_LOONGSON64 587 select IRQ_DOMAIN_HIERARCHY 588 select PCI_MSI 589 help 590 Support for the Loongson PCH MSI Controller. 591 592config MST_IRQ 593 bool "MStar Interrupt Controller" 594 depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST 595 default ARCH_MEDIATEK 596 select IRQ_DOMAIN 597 select IRQ_DOMAIN_HIERARCHY 598 help 599 Support MStar Interrupt Controller. 600 601config WPCM450_AIC 602 bool "Nuvoton WPCM450 Advanced Interrupt Controller" 603 depends on ARCH_WPCM450 604 help 605 Support for the interrupt controller in the Nuvoton WPCM450 BMC SoC. 606 607config IRQ_IDT3243X 608 bool 609 select GENERIC_IRQ_CHIP 610 select IRQ_DOMAIN 611 612config APPLE_AIC 613 bool "Apple Interrupt Controller (AIC)" 614 depends on ARM64 615 depends on ARCH_APPLE || COMPILE_TEST 616 help 617 Support for the Apple Interrupt Controller found on Apple Silicon SoCs, 618 such as the M1. 619 620config MCHP_EIC 621 bool "Microchip External Interrupt Controller" 622 depends on ARCH_AT91 || COMPILE_TEST 623 select IRQ_DOMAIN 624 select IRQ_DOMAIN_HIERARCHY 625 help 626 Support for Microchip External Interrupt Controller. 627 628endmenu 629