xref: /linux/drivers/input/touchscreen/zet6223.c (revision 7ec462100ef9142344ddbf86f2c3008b97acddbe)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2016, Jelle van der Waa <jelle@vdwaa.nl>
4  */
5 
6 #include <linux/delay.h>
7 #include <linux/i2c.h>
8 #include <linux/input.h>
9 #include <linux/input/mt.h>
10 #include <linux/input/touchscreen.h>
11 #include <linux/interrupt.h>
12 #include <linux/module.h>
13 #include <linux/regulator/consumer.h>
14 #include <linux/unaligned.h>
15 
16 #define ZET6223_MAX_FINGERS		16
17 #define ZET6223_MAX_PKT_SIZE		(3 + 4 * ZET6223_MAX_FINGERS)
18 
19 #define ZET6223_CMD_INFO		0xB2
20 #define ZET6223_CMD_INFO_LENGTH		17
21 #define ZET6223_VALID_PACKET		0x3c
22 
23 #define ZET6223_POWER_ON_DELAY_MSEC	30
24 
25 struct zet6223_ts {
26 	struct i2c_client *client;
27 	struct input_dev *input;
28 	struct touchscreen_properties prop;
29 	struct regulator_bulk_data supplies[2];
30 	u16 max_x;
31 	u16 max_y;
32 	u8 fingernum;
33 };
34 
zet6223_start(struct input_dev * dev)35 static int zet6223_start(struct input_dev *dev)
36 {
37 	struct zet6223_ts *ts = input_get_drvdata(dev);
38 
39 	enable_irq(ts->client->irq);
40 
41 	return 0;
42 }
43 
zet6223_stop(struct input_dev * dev)44 static void zet6223_stop(struct input_dev *dev)
45 {
46 	struct zet6223_ts *ts = input_get_drvdata(dev);
47 
48 	disable_irq(ts->client->irq);
49 }
50 
zet6223_irq(int irq,void * dev_id)51 static irqreturn_t zet6223_irq(int irq, void *dev_id)
52 {
53 	struct zet6223_ts *ts = dev_id;
54 	u16 finger_bits;
55 
56 	/*
57 	 * First 3 bytes are an identifier, two bytes of finger data.
58 	 * X, Y data per finger is 4 bytes.
59 	 */
60 	u8 bufsize = 3 + 4 * ts->fingernum;
61 	u8 buf[ZET6223_MAX_PKT_SIZE];
62 	int i;
63 	int ret;
64 	int error;
65 
66 	ret = i2c_master_recv(ts->client, buf, bufsize);
67 	if (ret != bufsize) {
68 		error = ret < 0 ? ret : -EIO;
69 		dev_err_ratelimited(&ts->client->dev,
70 				    "Error reading input data: %d\n", error);
71 		return IRQ_HANDLED;
72 	}
73 
74 	if (buf[0] != ZET6223_VALID_PACKET)
75 		return IRQ_HANDLED;
76 
77 	finger_bits = get_unaligned_be16(buf + 1);
78 	for (i = 0; i < ts->fingernum; i++) {
79 		if (!(finger_bits & BIT(15 - i)))
80 			continue;
81 
82 		input_mt_slot(ts->input, i);
83 		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
84 		input_event(ts->input, EV_ABS, ABS_MT_POSITION_X,
85 				((buf[i + 3] >> 4) << 8) + buf[i + 4]);
86 		input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y,
87 				((buf[i + 3] & 0xF) << 8) + buf[i + 5]);
88 	}
89 
90 	input_mt_sync_frame(ts->input);
91 	input_sync(ts->input);
92 
93 	return IRQ_HANDLED;
94 }
95 
zet6223_power_off(void * _ts)96 static void zet6223_power_off(void *_ts)
97 {
98 	struct zet6223_ts *ts = _ts;
99 
100 	regulator_bulk_disable(ARRAY_SIZE(ts->supplies), ts->supplies);
101 }
102 
zet6223_power_on(struct zet6223_ts * ts)103 static int zet6223_power_on(struct zet6223_ts *ts)
104 {
105 	struct device *dev = &ts->client->dev;
106 	int error;
107 
108 	ts->supplies[0].supply = "vio";
109 	ts->supplies[1].supply = "vcc";
110 
111 	error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->supplies),
112 					ts->supplies);
113 	if (error)
114 		return error;
115 
116 	error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies), ts->supplies);
117 	if (error)
118 		return error;
119 
120 	msleep(ZET6223_POWER_ON_DELAY_MSEC);
121 
122 	error = devm_add_action_or_reset(dev, zet6223_power_off, ts);
123 	if (error) {
124 		dev_err(dev, "failed to install poweroff action: %d\n", error);
125 		return error;
126 	}
127 
128 	return 0;
129 }
130 
zet6223_query_device(struct zet6223_ts * ts)131 static int zet6223_query_device(struct zet6223_ts *ts)
132 {
133 	u8 buf[ZET6223_CMD_INFO_LENGTH];
134 	u8 cmd = ZET6223_CMD_INFO;
135 	int ret;
136 	int error;
137 
138 	ret = i2c_master_send(ts->client, &cmd, sizeof(cmd));
139 	if (ret != sizeof(cmd)) {
140 		error = ret < 0 ? ret : -EIO;
141 		dev_err(&ts->client->dev,
142 			"touchpanel info cmd failed: %d\n", error);
143 		return error;
144 	}
145 
146 	ret = i2c_master_recv(ts->client, buf, sizeof(buf));
147 	if (ret != sizeof(buf)) {
148 		error = ret < 0 ? ret : -EIO;
149 		dev_err(&ts->client->dev,
150 			"failed to retrieve touchpanel info: %d\n", error);
151 		return error;
152 	}
153 
154 	ts->fingernum = buf[15] & 0x7F;
155 	if (ts->fingernum > ZET6223_MAX_FINGERS) {
156 		dev_warn(&ts->client->dev,
157 			 "touchpanel reports %d fingers, limiting to %d\n",
158 			 ts->fingernum, ZET6223_MAX_FINGERS);
159 		ts->fingernum = ZET6223_MAX_FINGERS;
160 	}
161 
162 	ts->max_x = get_unaligned_le16(&buf[8]);
163 	ts->max_y = get_unaligned_le16(&buf[10]);
164 
165 	return 0;
166 }
167 
zet6223_probe(struct i2c_client * client)168 static int zet6223_probe(struct i2c_client *client)
169 {
170 	struct device *dev = &client->dev;
171 	struct zet6223_ts *ts;
172 	struct input_dev *input;
173 	int error;
174 
175 	if (!client->irq) {
176 		dev_err(dev, "no irq specified\n");
177 		return -EINVAL;
178 	}
179 
180 	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
181 	if (!ts)
182 		return -ENOMEM;
183 
184 	ts->client = client;
185 
186 	error = zet6223_power_on(ts);
187 	if (error)
188 		return error;
189 
190 	error = zet6223_query_device(ts);
191 	if (error)
192 		return error;
193 
194 	ts->input = input = devm_input_allocate_device(dev);
195 	if (!input)
196 		return -ENOMEM;
197 
198 	input_set_drvdata(input, ts);
199 
200 	input->name = client->name;
201 	input->id.bustype = BUS_I2C;
202 	input->open = zet6223_start;
203 	input->close = zet6223_stop;
204 
205 	input_set_abs_params(input, ABS_MT_POSITION_X, 0, ts->max_x, 0, 0);
206 	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ts->max_y, 0, 0);
207 
208 	touchscreen_parse_properties(input, true, &ts->prop);
209 
210 	error = input_mt_init_slots(input, ts->fingernum,
211 				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
212 	if (error)
213 		return error;
214 
215 	error = devm_request_threaded_irq(dev, client->irq, NULL, zet6223_irq,
216 					  IRQF_ONESHOT, client->name, ts);
217 	if (error) {
218 		dev_err(dev, "failed to request irq %d: %d\n",
219 			client->irq, error);
220 		return error;
221 	}
222 
223 	zet6223_stop(input);
224 
225 	error = input_register_device(input);
226 	if (error)
227 		return error;
228 
229 	return 0;
230 }
231 
232 static const struct of_device_id zet6223_of_match[] = {
233 	{ .compatible = "zeitec,zet6223" },
234 	{ }
235 };
236 MODULE_DEVICE_TABLE(of, zet6223_of_match);
237 
238 static const struct i2c_device_id zet6223_id[] = {
239 	{ "zet6223" },
240 	{ }
241 };
242 MODULE_DEVICE_TABLE(i2c, zet6223_id);
243 
244 static struct i2c_driver zet6223_driver = {
245 	.driver = {
246 		.name = "zet6223",
247 		.of_match_table = zet6223_of_match,
248 	},
249 	.probe = zet6223_probe,
250 	.id_table = zet6223_id
251 };
252 module_i2c_driver(zet6223_driver);
253 
254 MODULE_AUTHOR("Jelle van der Waa <jelle@vdwaa.nl>");
255 MODULE_DESCRIPTION("ZEITEC zet622x I2C touchscreen driver");
256 MODULE_LICENSE("GPL");
257