1 /*
2 * Wacom W8001 penabled serial touchscreen driver
3 *
4 * Copyright (c) 2008 Jaya Kumar
5 * Copyright (c) 2010 Red Hat, Inc.
6 * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com>
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License. See the file COPYING in the main directory of this archive for
10 * more details.
11 *
12 * Layout based on Elo serial touchscreen driver by Vojtech Pavlik
13 */
14
15 #include <linux/errno.h>
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/slab.h>
19 #include <linux/input/mt.h>
20 #include <linux/serio.h>
21 #include <linux/ctype.h>
22 #include <linux/delay.h>
23
24 #define DRIVER_DESC "Wacom W8001 serial touchscreen driver"
25
26 MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
27 MODULE_DESCRIPTION(DRIVER_DESC);
28 MODULE_LICENSE("GPL");
29
30 #define W8001_MAX_PHYS 42
31
32 #define W8001_MAX_LENGTH 13
33 #define W8001_LEAD_MASK 0x80
34 #define W8001_LEAD_BYTE 0x80
35 #define W8001_TAB_MASK 0x40
36 #define W8001_TAB_BYTE 0x40
37 /* set in first byte of touch data packets */
38 #define W8001_TOUCH_MASK (0x10 | W8001_LEAD_MASK)
39 #define W8001_TOUCH_BYTE (0x10 | W8001_LEAD_BYTE)
40
41 #define W8001_QUERY_PACKET 0x20
42
43 #define W8001_CMD_STOP '0'
44 #define W8001_CMD_START '1'
45 #define W8001_CMD_QUERY '*'
46 #define W8001_CMD_TOUCHQUERY '%'
47
48 /* length of data packets in bytes, depends on device. */
49 #define W8001_PKTLEN_TOUCH93 5
50 #define W8001_PKTLEN_TOUCH9A 7
51 #define W8001_PKTLEN_TPCPEN 9
52 #define W8001_PKTLEN_TPCCTL 11 /* control packet */
53 #define W8001_PKTLEN_TOUCH2FG 13
54
55 /* resolution in points/mm */
56 #define W8001_PEN_RESOLUTION 100
57 #define W8001_TOUCH_RESOLUTION 10
58
59 struct w8001_coord {
60 u8 rdy;
61 u8 tsw;
62 u8 f1;
63 u8 f2;
64 u16 x;
65 u16 y;
66 u16 pen_pressure;
67 u8 tilt_x;
68 u8 tilt_y;
69 };
70
71 /* touch query reply packet */
72 struct w8001_touch_query {
73 u16 x;
74 u16 y;
75 u8 panel_res;
76 u8 capacity_res;
77 u8 sensor_id;
78 };
79
80 /*
81 * Per-touchscreen data.
82 */
83
84 struct w8001 {
85 struct input_dev *pen_dev;
86 struct input_dev *touch_dev;
87 struct serio *serio;
88 struct completion cmd_done;
89 int id;
90 int idx;
91 unsigned char response_type;
92 unsigned char response[W8001_MAX_LENGTH];
93 unsigned char data[W8001_MAX_LENGTH];
94 char phys[W8001_MAX_PHYS];
95 int type;
96 unsigned int pktlen;
97 u16 max_touch_x;
98 u16 max_touch_y;
99 u16 max_pen_x;
100 u16 max_pen_y;
101 char pen_name[64];
102 char touch_name[64];
103 int open_count;
104 struct mutex mutex;
105 };
106
parse_pen_data(u8 * data,struct w8001_coord * coord)107 static void parse_pen_data(u8 *data, struct w8001_coord *coord)
108 {
109 memset(coord, 0, sizeof(*coord));
110
111 coord->rdy = data[0] & 0x20;
112 coord->tsw = data[0] & 0x01;
113 coord->f1 = data[0] & 0x02;
114 coord->f2 = data[0] & 0x04;
115
116 coord->x = (data[1] & 0x7F) << 9;
117 coord->x |= (data[2] & 0x7F) << 2;
118 coord->x |= (data[6] & 0x60) >> 5;
119
120 coord->y = (data[3] & 0x7F) << 9;
121 coord->y |= (data[4] & 0x7F) << 2;
122 coord->y |= (data[6] & 0x18) >> 3;
123
124 coord->pen_pressure = data[5] & 0x7F;
125 coord->pen_pressure |= (data[6] & 0x07) << 7 ;
126
127 coord->tilt_x = data[7] & 0x7F;
128 coord->tilt_y = data[8] & 0x7F;
129 }
130
parse_single_touch(u8 * data,struct w8001_coord * coord)131 static void parse_single_touch(u8 *data, struct w8001_coord *coord)
132 {
133 coord->x = (data[1] << 7) | data[2];
134 coord->y = (data[3] << 7) | data[4];
135 coord->tsw = data[0] & 0x01;
136 }
137
scale_touch_coordinates(struct w8001 * w8001,unsigned int * x,unsigned int * y)138 static void scale_touch_coordinates(struct w8001 *w8001,
139 unsigned int *x, unsigned int *y)
140 {
141 if (w8001->max_pen_x && w8001->max_touch_x)
142 *x = *x * w8001->max_pen_x / w8001->max_touch_x;
143
144 if (w8001->max_pen_y && w8001->max_touch_y)
145 *y = *y * w8001->max_pen_y / w8001->max_touch_y;
146 }
147
parse_multi_touch(struct w8001 * w8001)148 static void parse_multi_touch(struct w8001 *w8001)
149 {
150 struct input_dev *dev = w8001->touch_dev;
151 unsigned char *data = w8001->data;
152 unsigned int x, y;
153 int i;
154 int count = 0;
155
156 for (i = 0; i < 2; i++) {
157 bool touch = data[0] & (1 << i);
158
159 input_mt_slot(dev, i);
160 input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
161 if (touch) {
162 x = (data[6 * i + 1] << 7) | data[6 * i + 2];
163 y = (data[6 * i + 3] << 7) | data[6 * i + 4];
164 /* data[5,6] and [11,12] is finger capacity */
165
166 /* scale to pen maximum */
167 scale_touch_coordinates(w8001, &x, &y);
168
169 input_report_abs(dev, ABS_MT_POSITION_X, x);
170 input_report_abs(dev, ABS_MT_POSITION_Y, y);
171 count++;
172 }
173 }
174
175 /* emulate single touch events when stylus is out of proximity.
176 * This is to make single touch backward support consistent
177 * across all Wacom single touch devices.
178 */
179 if (w8001->type != BTN_TOOL_PEN &&
180 w8001->type != BTN_TOOL_RUBBER) {
181 w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED;
182 input_mt_report_pointer_emulation(dev, true);
183 }
184
185 input_sync(dev);
186 }
187
parse_touchquery(u8 * data,struct w8001_touch_query * query)188 static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
189 {
190 memset(query, 0, sizeof(*query));
191
192 query->panel_res = data[1];
193 query->sensor_id = data[2] & 0x7;
194 query->capacity_res = data[7];
195
196 query->x = data[3] << 9;
197 query->x |= data[4] << 2;
198 query->x |= (data[2] >> 5) & 0x3;
199
200 query->y = data[5] << 9;
201 query->y |= data[6] << 2;
202 query->y |= (data[2] >> 3) & 0x3;
203
204 /* Early days' single-finger touch models need the following defaults */
205 if (!query->x && !query->y) {
206 query->x = 1024;
207 query->y = 1024;
208 if (query->panel_res)
209 query->x = query->y = (1 << query->panel_res);
210 query->panel_res = W8001_TOUCH_RESOLUTION;
211 }
212 }
213
report_pen_events(struct w8001 * w8001,struct w8001_coord * coord)214 static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
215 {
216 struct input_dev *dev = w8001->pen_dev;
217
218 /*
219 * We have 1 bit for proximity (rdy) and 3 bits for tip, side,
220 * side2/eraser. If rdy && f2 are set, this can be either pen + side2,
221 * or eraser. Assume:
222 * - if dev is already in proximity and f2 is toggled → pen + side2
223 * - if dev comes into proximity with f2 set → eraser
224 * If f2 disappears after assuming eraser, fake proximity out for
225 * eraser and in for pen.
226 */
227
228 switch (w8001->type) {
229 case BTN_TOOL_RUBBER:
230 if (!coord->f2) {
231 input_report_abs(dev, ABS_PRESSURE, 0);
232 input_report_key(dev, BTN_TOUCH, 0);
233 input_report_key(dev, BTN_STYLUS, 0);
234 input_report_key(dev, BTN_STYLUS2, 0);
235 input_report_key(dev, BTN_TOOL_RUBBER, 0);
236 input_sync(dev);
237 w8001->type = BTN_TOOL_PEN;
238 }
239 break;
240
241 case BTN_TOOL_FINGER:
242 case KEY_RESERVED:
243 w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
244 break;
245
246 default:
247 input_report_key(dev, BTN_STYLUS2, coord->f2);
248 break;
249 }
250
251 input_report_abs(dev, ABS_X, coord->x);
252 input_report_abs(dev, ABS_Y, coord->y);
253 input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure);
254 input_report_key(dev, BTN_TOUCH, coord->tsw);
255 input_report_key(dev, BTN_STYLUS, coord->f1);
256 input_report_key(dev, w8001->type, coord->rdy);
257 input_sync(dev);
258
259 if (!coord->rdy)
260 w8001->type = KEY_RESERVED;
261 }
262
report_single_touch(struct w8001 * w8001,struct w8001_coord * coord)263 static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
264 {
265 struct input_dev *dev = w8001->touch_dev;
266 unsigned int x = coord->x;
267 unsigned int y = coord->y;
268
269 /* scale to pen maximum */
270 scale_touch_coordinates(w8001, &x, &y);
271
272 input_report_abs(dev, ABS_X, x);
273 input_report_abs(dev, ABS_Y, y);
274 input_report_key(dev, BTN_TOUCH, coord->tsw);
275
276 input_sync(dev);
277
278 w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED;
279 }
280
w8001_interrupt(struct serio * serio,unsigned char data,unsigned int flags)281 static irqreturn_t w8001_interrupt(struct serio *serio,
282 unsigned char data, unsigned int flags)
283 {
284 struct w8001 *w8001 = serio_get_drvdata(serio);
285 struct w8001_coord coord;
286 unsigned char tmp;
287
288 w8001->data[w8001->idx] = data;
289 switch (w8001->idx++) {
290 case 0:
291 if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) {
292 pr_debug("w8001: unsynchronized data: 0x%02x\n", data);
293 w8001->idx = 0;
294 }
295 break;
296
297 case W8001_PKTLEN_TOUCH93 - 1:
298 case W8001_PKTLEN_TOUCH9A - 1:
299 tmp = w8001->data[0] & W8001_TOUCH_BYTE;
300 if (tmp != W8001_TOUCH_BYTE)
301 break;
302
303 if (w8001->pktlen == w8001->idx) {
304 w8001->idx = 0;
305 if (w8001->type != BTN_TOOL_PEN &&
306 w8001->type != BTN_TOOL_RUBBER) {
307 parse_single_touch(w8001->data, &coord);
308 report_single_touch(w8001, &coord);
309 }
310 }
311 break;
312
313 /* Pen coordinates packet */
314 case W8001_PKTLEN_TPCPEN - 1:
315 tmp = w8001->data[0] & W8001_TAB_MASK;
316 if (unlikely(tmp == W8001_TAB_BYTE))
317 break;
318
319 tmp = w8001->data[0] & W8001_TOUCH_BYTE;
320 if (tmp == W8001_TOUCH_BYTE)
321 break;
322
323 w8001->idx = 0;
324 parse_pen_data(w8001->data, &coord);
325 report_pen_events(w8001, &coord);
326 break;
327
328 /* control packet */
329 case W8001_PKTLEN_TPCCTL - 1:
330 tmp = w8001->data[0] & W8001_TOUCH_MASK;
331 if (tmp == W8001_TOUCH_BYTE)
332 break;
333
334 w8001->idx = 0;
335 memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH);
336 w8001->response_type = W8001_QUERY_PACKET;
337 complete(&w8001->cmd_done);
338 break;
339
340 /* 2 finger touch packet */
341 case W8001_PKTLEN_TOUCH2FG - 1:
342 w8001->idx = 0;
343 parse_multi_touch(w8001);
344 break;
345
346 default:
347 /*
348 * ThinkPad X60 Tablet PC (pen only device) sometimes
349 * sends invalid data packets that are larger than
350 * W8001_PKTLEN_TPCPEN. Let's start over again.
351 */
352 if (!w8001->touch_dev && w8001->idx > W8001_PKTLEN_TPCPEN - 1)
353 w8001->idx = 0;
354 }
355
356 return IRQ_HANDLED;
357 }
358
w8001_command(struct w8001 * w8001,unsigned char command,bool wait_response)359 static int w8001_command(struct w8001 *w8001, unsigned char command,
360 bool wait_response)
361 {
362 int rc;
363
364 w8001->response_type = 0;
365 init_completion(&w8001->cmd_done);
366
367 rc = serio_write(w8001->serio, command);
368 if (rc == 0 && wait_response) {
369
370 wait_for_completion_timeout(&w8001->cmd_done, HZ);
371 if (w8001->response_type != W8001_QUERY_PACKET)
372 rc = -EIO;
373 }
374
375 return rc;
376 }
377
w8001_open(struct input_dev * dev)378 static int w8001_open(struct input_dev *dev)
379 {
380 struct w8001 *w8001 = input_get_drvdata(dev);
381 int err;
382
383 scoped_guard(mutex_intr, &w8001->mutex) {
384 if (w8001->open_count == 0) {
385 err = w8001_command(w8001, W8001_CMD_START, false);
386 if (err)
387 return err;
388 }
389
390 w8001->open_count++;
391 return 0;
392 }
393
394 return -EINTR;
395 }
396
w8001_close(struct input_dev * dev)397 static void w8001_close(struct input_dev *dev)
398 {
399 struct w8001 *w8001 = input_get_drvdata(dev);
400
401 guard(mutex)(&w8001->mutex);
402
403 if (--w8001->open_count == 0)
404 w8001_command(w8001, W8001_CMD_STOP, false);
405 }
406
w8001_detect(struct w8001 * w8001)407 static int w8001_detect(struct w8001 *w8001)
408 {
409 int error;
410
411 error = w8001_command(w8001, W8001_CMD_STOP, false);
412 if (error)
413 return error;
414
415 msleep(250); /* wait 250ms before querying the device */
416
417 return 0;
418 }
419
w8001_setup_pen(struct w8001 * w8001,char * basename,size_t basename_sz)420 static int w8001_setup_pen(struct w8001 *w8001, char *basename,
421 size_t basename_sz)
422 {
423 struct input_dev *dev = w8001->pen_dev;
424 struct w8001_coord coord;
425 int error;
426
427 /* penabled? */
428 error = w8001_command(w8001, W8001_CMD_QUERY, true);
429 if (error)
430 return error;
431
432 __set_bit(EV_KEY, dev->evbit);
433 __set_bit(EV_ABS, dev->evbit);
434 __set_bit(BTN_TOUCH, dev->keybit);
435 __set_bit(BTN_TOOL_PEN, dev->keybit);
436 __set_bit(BTN_TOOL_RUBBER, dev->keybit);
437 __set_bit(BTN_STYLUS, dev->keybit);
438 __set_bit(BTN_STYLUS2, dev->keybit);
439 __set_bit(INPUT_PROP_DIRECT, dev->propbit);
440
441 parse_pen_data(w8001->response, &coord);
442 w8001->max_pen_x = coord.x;
443 w8001->max_pen_y = coord.y;
444
445 input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
446 input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
447 input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
448 input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
449 input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
450 if (coord.tilt_x && coord.tilt_y) {
451 input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
452 input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
453 }
454
455 w8001->id = 0x90;
456 strlcat(basename, " Penabled", basename_sz);
457
458 return 0;
459 }
460
w8001_setup_touch(struct w8001 * w8001,char * basename,size_t basename_sz)461 static int w8001_setup_touch(struct w8001 *w8001, char *basename,
462 size_t basename_sz)
463 {
464 struct input_dev *dev = w8001->touch_dev;
465 struct w8001_touch_query touch;
466 int error;
467
468
469 /* Touch enabled? */
470 error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
471 if (error)
472 return error;
473 /*
474 * Some non-touch devices may reply to the touch query. But their
475 * second byte is empty, which indicates touch is not supported.
476 */
477 if (!w8001->response[1])
478 return -ENXIO;
479
480 __set_bit(EV_KEY, dev->evbit);
481 __set_bit(EV_ABS, dev->evbit);
482 __set_bit(BTN_TOUCH, dev->keybit);
483 __set_bit(INPUT_PROP_DIRECT, dev->propbit);
484
485 parse_touchquery(w8001->response, &touch);
486 w8001->max_touch_x = touch.x;
487 w8001->max_touch_y = touch.y;
488
489 if (w8001->max_pen_x && w8001->max_pen_y) {
490 /* if pen is supported scale to pen maximum */
491 touch.x = w8001->max_pen_x;
492 touch.y = w8001->max_pen_y;
493 touch.panel_res = W8001_PEN_RESOLUTION;
494 }
495
496 input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
497 input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
498 input_abs_set_res(dev, ABS_X, touch.panel_res);
499 input_abs_set_res(dev, ABS_Y, touch.panel_res);
500
501 switch (touch.sensor_id) {
502 case 0:
503 case 2:
504 w8001->pktlen = W8001_PKTLEN_TOUCH93;
505 w8001->id = 0x93;
506 strlcat(basename, " 1FG", basename_sz);
507 break;
508
509 case 1:
510 case 3:
511 case 4:
512 w8001->pktlen = W8001_PKTLEN_TOUCH9A;
513 strlcat(basename, " 1FG", basename_sz);
514 w8001->id = 0x9a;
515 break;
516
517 case 5:
518 w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
519
520 __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
521 error = input_mt_init_slots(dev, 2, 0);
522 if (error) {
523 dev_err(&w8001->serio->dev,
524 "failed to initialize MT slots: %d\n", error);
525 return error;
526 }
527
528 input_set_abs_params(dev, ABS_MT_POSITION_X,
529 0, touch.x, 0, 0);
530 input_set_abs_params(dev, ABS_MT_POSITION_Y,
531 0, touch.y, 0, 0);
532 input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
533 0, MT_TOOL_MAX, 0, 0);
534 input_abs_set_res(dev, ABS_MT_POSITION_X, touch.panel_res);
535 input_abs_set_res(dev, ABS_MT_POSITION_Y, touch.panel_res);
536
537 strlcat(basename, " 2FG", basename_sz);
538 if (w8001->max_pen_x && w8001->max_pen_y)
539 w8001->id = 0xE3;
540 else
541 w8001->id = 0xE2;
542 break;
543 }
544
545 strlcat(basename, " Touchscreen", basename_sz);
546
547 return 0;
548 }
549
w8001_set_devdata(struct input_dev * dev,struct w8001 * w8001,struct serio * serio)550 static void w8001_set_devdata(struct input_dev *dev, struct w8001 *w8001,
551 struct serio *serio)
552 {
553 dev->phys = w8001->phys;
554 dev->id.bustype = BUS_RS232;
555 dev->id.product = w8001->id;
556 dev->id.vendor = 0x056a;
557 dev->id.version = 0x0100;
558 dev->open = w8001_open;
559 dev->close = w8001_close;
560
561 dev->dev.parent = &serio->dev;
562
563 input_set_drvdata(dev, w8001);
564 }
565
566 /*
567 * w8001_disconnect() is the opposite of w8001_connect()
568 */
569
w8001_disconnect(struct serio * serio)570 static void w8001_disconnect(struct serio *serio)
571 {
572 struct w8001 *w8001 = serio_get_drvdata(serio);
573
574 serio_close(serio);
575
576 if (w8001->pen_dev)
577 input_unregister_device(w8001->pen_dev);
578 if (w8001->touch_dev)
579 input_unregister_device(w8001->touch_dev);
580 kfree(w8001);
581
582 serio_set_drvdata(serio, NULL);
583 }
584
585 /*
586 * w8001_connect() is the routine that is called when someone adds a
587 * new serio device that supports the w8001 protocol and registers it as
588 * an input device.
589 */
590
w8001_connect(struct serio * serio,struct serio_driver * drv)591 static int w8001_connect(struct serio *serio, struct serio_driver *drv)
592 {
593 struct w8001 *w8001;
594 struct input_dev *input_dev_pen;
595 struct input_dev *input_dev_touch;
596 char basename[64] = "Wacom Serial";
597 int err, err_pen, err_touch;
598
599 w8001 = kzalloc(sizeof(*w8001), GFP_KERNEL);
600 input_dev_pen = input_allocate_device();
601 input_dev_touch = input_allocate_device();
602 if (!w8001 || !input_dev_pen || !input_dev_touch) {
603 err = -ENOMEM;
604 goto fail1;
605 }
606
607 w8001->serio = serio;
608 w8001->pen_dev = input_dev_pen;
609 w8001->touch_dev = input_dev_touch;
610 mutex_init(&w8001->mutex);
611 init_completion(&w8001->cmd_done);
612 snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
613
614 serio_set_drvdata(serio, w8001);
615 err = serio_open(serio, drv);
616 if (err)
617 goto fail2;
618
619 err = w8001_detect(w8001);
620 if (err)
621 goto fail3;
622
623 /* For backwards-compatibility we compose the basename based on
624 * capabilities and then just append the tool type
625 */
626 err_pen = w8001_setup_pen(w8001, basename, sizeof(basename));
627 err_touch = w8001_setup_touch(w8001, basename, sizeof(basename));
628 if (err_pen && err_touch) {
629 err = -ENXIO;
630 goto fail3;
631 }
632
633 if (!err_pen) {
634 snprintf(w8001->pen_name, sizeof(w8001->pen_name),
635 "%s Pen", basename);
636 input_dev_pen->name = w8001->pen_name;
637
638 w8001_set_devdata(input_dev_pen, w8001, serio);
639
640 err = input_register_device(w8001->pen_dev);
641 if (err)
642 goto fail3;
643 } else {
644 input_free_device(input_dev_pen);
645 input_dev_pen = NULL;
646 w8001->pen_dev = NULL;
647 }
648
649 if (!err_touch) {
650 snprintf(w8001->touch_name, sizeof(w8001->touch_name),
651 "%s Finger", basename);
652 input_dev_touch->name = w8001->touch_name;
653
654 w8001_set_devdata(input_dev_touch, w8001, serio);
655
656 err = input_register_device(w8001->touch_dev);
657 if (err)
658 goto fail4;
659 } else {
660 input_free_device(input_dev_touch);
661 input_dev_touch = NULL;
662 w8001->touch_dev = NULL;
663 }
664
665 return 0;
666
667 fail4:
668 if (w8001->pen_dev)
669 input_unregister_device(w8001->pen_dev);
670 fail3:
671 serio_close(serio);
672 fail2:
673 serio_set_drvdata(serio, NULL);
674 fail1:
675 input_free_device(input_dev_pen);
676 input_free_device(input_dev_touch);
677 kfree(w8001);
678 return err;
679 }
680
681 static const struct serio_device_id w8001_serio_ids[] = {
682 {
683 .type = SERIO_RS232,
684 .proto = SERIO_W8001,
685 .id = SERIO_ANY,
686 .extra = SERIO_ANY,
687 },
688 { 0 }
689 };
690
691 MODULE_DEVICE_TABLE(serio, w8001_serio_ids);
692
693 static struct serio_driver w8001_drv = {
694 .driver = {
695 .name = "w8001",
696 },
697 .description = DRIVER_DESC,
698 .id_table = w8001_serio_ids,
699 .interrupt = w8001_interrupt,
700 .connect = w8001_connect,
701 .disconnect = w8001_disconnect,
702 };
703
704 module_serio_driver(w8001_drv);
705