xref: /linux/drivers/iio/proximity/Kconfig (revision 0d5ec7919f3747193f051036b2301734a4b5e1d6)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Proximity sensors
4#
5
6menu "Lightning sensors"
7
8config AS3935
9	tristate "AS3935 Franklin lightning sensor"
10	select IIO_BUFFER
11	select IIO_TRIGGERED_BUFFER
12	depends on SPI
13	help
14	  Say Y here to build SPI interface support for the Austrian
15	  Microsystems AS3935 lightning detection sensor.
16
17	  To compile this driver as a module, choose M here: the
18	  module will be called as3935
19
20endmenu
21
22menu "Proximity and distance sensors"
23
24config CROS_EC_MKBP_PROXIMITY
25	tristate "ChromeOS EC MKBP Proximity sensor"
26	depends on CROS_EC
27	help
28	  Say Y here to enable the proximity sensor implemented via the ChromeOS EC MKBP
29	  switches protocol. You must enable one bus option (CROS_EC_I2C or CROS_EC_SPI)
30	  to use this.
31
32	  To compile this driver as a module, choose M here: the
33	  module will be called cros_ec_mkbp_proximity.
34
35config D3323AA
36	tristate "Nicera (Nippon Ceramic Co.) D3-323-AA PIR sensor"
37	depends on GPIOLIB
38	help
39	  Say Y here to build a driver for the Nicera D3-323-AA PIR sensor.
40
41	  To compile this driver as a module, choose M here: the module will be
42	  called d3323aa.
43
44config HX9023S
45	tristate "TYHX HX9023S SAR sensor"
46	select IIO_BUFFER
47	select IIO_TRIGGERED_BUFFER
48	select REGMAP_I2C
49	depends on I2C
50	help
51	  Say Y here to build a driver for TYHX HX9023S capacitive SAR sensor.
52	  This driver supports the TYHX HX9023S capacitive
53	  SAR sensors. This sensors is used for proximity detection applications.
54
55	  To compile this driver as a module, choose M here: the
56	  module will be called hx9023s.
57
58config IRSD200
59	tristate "Murata IRS-D200 PIR sensor"
60	select IIO_BUFFER
61	select IIO_TRIGGERED_BUFFER
62	select REGMAP_I2C
63	depends on I2C
64	help
65	  Say Y here to build a driver for the Murata IRS-D200 PIR sensor.
66
67	  To compile this driver as a module, choose M here: the module will be
68	  called irsd200.
69
70config ISL29501
71	tristate "Intersil ISL29501 Time Of Flight sensor"
72	depends on I2C
73	select IIO_BUFFER
74	select IIO_TRIGGERED_BUFFER
75	select IIO_KFIFO_BUF
76	help
77	  Say Y here if you want to build a driver for the Intersil ISL29501
78	  Time of Flight sensor.
79
80	  To compile this driver as a module, choose M here: the module will be
81	  called isl29501.
82
83config LIDAR_LITE_V2
84	tristate "PulsedLight LIDAR sensor"
85	select IIO_BUFFER
86	select IIO_TRIGGERED_BUFFER
87	depends on I2C
88	help
89	  Say Y to build a driver for PulsedLight LIDAR range finding
90	  sensor.
91
92	  To compile this driver as a module, choose M here: the
93	  module will be called pulsedlight-lite-v2
94
95config MB1232
96	tristate "MaxSonar I2CXL family ultrasonic sensors"
97	depends on I2C
98	select IIO_BUFFER
99	select IIO_TRIGGERED_BUFFER
100	help
101	  Say Y to build a driver for the ultrasonic sensors I2CXL of
102	  MaxBotix which have an i2c interface. It can be used to measure
103	  the distance of objects. Supported types are mb1202, mb1212,
104	  mb1222, mb1232, mb1242, mb7040, mb7137
105
106	  To compile this driver as a module, choose M here: the
107	  module will be called mb1232.
108
109config PING
110	tristate "Parallax GPIO bitbanged ranger sensors"
111	depends on GPIOLIB
112	help
113	  Say Y here to build a driver for GPIO bitbanged ranger sensors
114	  with just one GPIO for the trigger and echo. This driver can be
115	  used to measure the distance of objects.
116
117	  Actually supported are:
118	  - Parallax PING))) (ultrasonic)
119	  - Parallax LaserPING (time-of-flight)
120
121	  To compile this driver as a module, choose M here: the
122	  module will be called ping.
123
124config RFD77402
125	tristate "RFD77402 ToF sensor"
126	depends on I2C
127	help
128	  Say Y to build a driver for the RFD77402 Time-of-Flight (distance)
129	  sensor module with I2C interface.
130
131	  To compile this driver as a module, choose M here: the
132	  module will be called rfd77402.
133
134config SRF04
135	tristate "GPIO bitbanged ultrasonic ranger sensor (SRF04, MB1000)"
136	depends on GPIOLIB
137	help
138	  Say Y here to build a driver for GPIO bitbanged ultrasonic
139	  ranger sensor. This driver can be used to measure the distance
140	  of objects. It is using two GPIOs.
141	  Actually Supported types are:
142	  - Devantech SRF04
143	  - Maxbotix mb1000
144	  - Maxbotix mb1010
145	  - Maxbotix mb1020
146	  - Maxbotix mb1030
147	  - Maxbotix mb1040
148
149	  To compile this driver as a module, choose M here: the
150	  module will be called srf04.
151
152config SX_COMMON
153	tristate
154	help
155	  Common Semtech proximity sensor code.
156
157config SX9310
158	tristate "SX9310/SX9311 Semtech proximity sensor"
159	select IIO_BUFFER
160	select IIO_TRIGGERED_BUFFER
161	select REGMAP_I2C
162	select SX_COMMON
163	depends on I2C
164	help
165	  Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
166	  proximity/button sensor.
167
168	  To compile this driver as a module, choose M here: the
169	  module will be called sx9310.
170
171config SX9324
172	tristate "SX9324 Semtech proximity sensor"
173	select IIO_BUFFER
174	select IIO_TRIGGERED_BUFFER
175	select REGMAP_I2C
176	select SX_COMMON
177	depends on I2C
178	help
179	  Say Y here to build a driver for Semtech's SX9324
180	  proximity/button sensor.
181
182	  To compile this driver as a module, choose M here: the
183	  module will be called sx9324.
184
185config SX9360
186	tristate "SX9360 Semtech proximity sensor"
187	select IIO_BUFFER
188	select IIO_TRIGGERED_BUFFER
189	select REGMAP_I2C
190	select SX_COMMON
191	depends on I2C
192	help
193	  Say Y here to build a driver for Semtech's SX9360
194	  proximity/button sensor, a simplified SX9324.
195
196	  To compile this driver as a module, choose M here: the
197	  module will be called sx9360.
198
199config SX9500
200	tristate "SX9500 Semtech proximity sensor"
201	select IIO_BUFFER
202	select IIO_TRIGGERED_BUFFER
203	select REGMAP_I2C
204	depends on I2C
205	help
206	  Say Y here to build a driver for Semtech's SX9500 capacitive
207	  proximity/button sensor.
208
209	  To compile this driver as a module, choose M here: the
210	  module will be called sx9500.
211
212config SRF08
213	tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
214	select IIO_BUFFER
215	select IIO_TRIGGERED_BUFFER
216	depends on I2C
217	help
218	  Say Y here to build a driver for Devantech SRF02/SRF08/SRF10
219	  ultrasonic ranger sensors with i2c interface.
220	  This driver can be used to measure the distance of objects.
221
222	  To compile this driver as a module, choose M here: the
223	  module will be called srf08.
224
225config VCNL3020
226	tristate "VCNL3020 proximity sensor"
227	select REGMAP_I2C
228	depends on I2C
229	help
230	  Say Y here if you want to build a driver for the Vishay VCNL3020
231	  proximity sensor.
232
233	  To compile this driver as a module, choose M here: the
234	  module will be called vcnl3020.
235
236config VL53L0X_I2C
237	tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
238	depends on I2C
239	help
240	  Say Y here to build a driver for STMicroelectronics VL53L0X
241	  ToF ranger sensors with i2c interface.
242	  This driver can be used to measure the distance of objects.
243
244	  To compile this driver as a module, choose M here: the
245	  module will be called vl53l0x-i2c.
246
247config AW96103
248	tristate "AW96103/AW96105 Awinic proximity sensor"
249	select REGMAP_I2C
250	depends on I2C
251	help
252	  Say Y here to build a driver for Awinic's AW96103/AW96105 capacitive
253	  proximity sensor.
254
255	  To compile this driver as a module, choose M here: the
256	  module will be called aw96103.
257
258endmenu
259