1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AF8133J 10 tristate "Voltafield AF8133J 3-Axis Magnetometer" 11 depends on I2C 12 depends on OF 13 select REGMAP_I2C 14 select IIO_BUFFER 15 select IIO_TRIGGERED_BUFFER 16 help 17 Say yes here to build support for Voltafield AF8133J I2C-based 18 3-axis magnetometer chip. 19 20 To compile this driver as a module, choose M here: the module 21 will be called af8133j. 22 23config AK8974 24 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 25 depends on I2C 26 select REGMAP_I2C 27 select IIO_BUFFER 28 select IIO_TRIGGERED_BUFFER 29 help 30 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 31 AMI306 I2C-based 3-axis magnetometer chips. 32 33 To compile this driver as a module, choose M here: the module 34 will be called ak8974. 35 36config AK8975 37 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 38 depends on I2C 39 depends on GPIOLIB || COMPILE_TEST 40 select IIO_BUFFER 41 select IIO_TRIGGERED_BUFFER 42 help 43 Say yes here to build support for Asahi Kasei AK8975, AK8963, 44 AK09911, AK09912, AK09916 or AK09918 3-Axis Magnetometer. 45 46 To compile this driver as a module, choose M here: the module 47 will be called ak8975. 48 49config AK09911 50 tristate "Asahi Kasei AK09911 3-axis Compass" 51 depends on I2C 52 depends on GPIOLIB || COMPILE_TEST 53 select AK8975 54 help 55 Deprecated: AK09911 is now supported by AK8975 driver. 56 57config ALS31300 58 tristate "Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor" 59 depends on I2C 60 select REGMAP_I2C 61 select IIO_BUFFER 62 select IIO_TRIGGERED_BUFFER 63 help 64 Say yes here to build support for the Allegro MicroSystems 65 ALS31300 Hall Effect Sensor through its I2C interface. 66 67 To compile this driver as a module, choose M here: the 68 module will be called als31300. 69 70config BMC150_MAGN 71 tristate 72 select IIO_BUFFER 73 select IIO_TRIGGERED_BUFFER 74 75config BMC150_MAGN_I2C 76 tristate "Bosch BMC150 I2C Magnetometer Driver" 77 depends on I2C 78 select BMC150_MAGN 79 select REGMAP_I2C 80 help 81 Say yes here to build support for the BMC150 magnetometer with 82 I2C interface. 83 84 This is a combo module with both accelerometer and magnetometer. 85 This driver is only implementing magnetometer part, which has 86 its own address and register map. 87 88 This driver also supports I2C Bosch BMC156 and BMM150 chips. 89 To compile this driver as a module, choose M here: the module will be 90 called bmc150_magn_i2c. 91 92config BMC150_MAGN_SPI 93 tristate "Bosch BMC150 SPI Magnetometer Driver" 94 depends on SPI 95 select BMC150_MAGN 96 select REGMAP_SPI 97 help 98 Say yes here to build support for the BMC150 magnetometer with 99 SPI interface. 100 101 This is a combo module with both accelerometer and magnetometer. 102 This driver is only implementing magnetometer part, which has 103 its own address and register map. 104 105 This driver also supports SPI Bosch BMC156 and BMM150 chips. 106 To compile this driver as a module, choose M here: the module will be 107 called bmc150_magn_spi. 108 109config MAG3110 110 tristate "Freescale MAG3110 3-Axis Magnetometer" 111 depends on I2C 112 select IIO_BUFFER 113 select IIO_TRIGGERED_BUFFER 114 help 115 Say yes here to build support for the Freescale MAG3110 3-Axis 116 magnetometer. 117 118 To compile this driver as a module, choose M here: the module 119 will be called mag3110. 120 121config HID_SENSOR_MAGNETOMETER_3D 122 depends on HID_SENSOR_HUB 123 select IIO_BUFFER 124 select HID_SENSOR_IIO_COMMON 125 select HID_SENSOR_IIO_TRIGGER 126 tristate "HID Magnetometer 3D" 127 help 128 Say yes here to build support for the HID SENSOR 129 Magnetometer 3D. 130 131config MMC35240 132 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 133 select REGMAP_I2C 134 depends on I2C 135 help 136 Say yes here to build support for the MEMSIC MMC35240 3-axis 137 magnetic sensor. 138 139 To compile this driver as a module, choose M here: the module 140 will be called mmc35240. 141 142config MMC5633 143 tristate "MEMSIC MMC5633 3-axis magnetic sensor" 144 select REGMAP_I2C 145 select REGMAP_I3C 146 depends on I2C || I3C 147 help 148 Say yes here to build support for the MEMSIC MMC5633 3-axis 149 magnetic sensor. 150 151 To compile this driver as a module, choose M here: the module 152 will be called mmc5633 153 154config IIO_ST_MAGN_3AXIS 155 tristate "STMicroelectronics magnetometers 3-Axis Driver" 156 depends on (I2C || SPI_MASTER) && SYSFS 157 select IIO_ST_SENSORS_CORE 158 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 159 help 160 Say yes here to build support for STMicroelectronics magnetometers: 161 LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL. 162 163 Also need to enable at least one of I2C and SPI interface drivers 164 below. 165 166config IIO_ST_MAGN_I2C_3AXIS 167 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" 168 depends on I2C && IIO_ST_MAGN_3AXIS 169 default I2C && IIO_ST_MAGN_3AXIS 170 select IIO_ST_SENSORS_I2C 171 help 172 Build support for STMicroelectronics magnetometers I2C interface. 173 174 To compile this driver as a module, choose M here. The module 175 will be called st_magn_i2c. 176 177config IIO_ST_MAGN_SPI_3AXIS 178 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" 179 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS 180 default SPI_MASTER && IIO_ST_MAGN_3AXIS 181 select IIO_ST_SENSORS_SPI 182 help 183 Build support for STMicroelectronics magnetometers SPI interface. 184 185 To compile this driver as a module, choose M here. The module 186 will be called st_magn_spi. 187 188config INFINEON_TLV493D 189 tristate "Infineon TLV493D Low-Power 3D Magnetic Sensor" 190 depends on I2C 191 select IIO_BUFFER 192 select IIO_TRIGGERED_BUFFER 193 help 194 Say Y here to add support for the Infineon TLV493D-A1B6 Low- 195 Power 3D Magnetic Sensor. 196 197 This driver can also be compiled as a module. 198 To compile this driver as a module, choose M here: the module 199 will be called tlv493d. 200 201config SENSORS_HMC5843 202 tristate 203 select IIO_BUFFER 204 select IIO_TRIGGERED_BUFFER 205 206config SENSORS_HMC5843_I2C 207 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 208 depends on I2C 209 select SENSORS_HMC5843 210 select REGMAP_I2C 211 help 212 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 213 HMC5883L 3-Axis Magnetometer (digital compass). 214 215 This driver can also be compiled as a set of modules. 216 If so, these modules will be created: 217 - hmc5843_core (core functions) 218 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 219 220config SENSORS_HMC5843_SPI 221 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 222 depends on SPI_MASTER 223 select SENSORS_HMC5843 224 select REGMAP_SPI 225 help 226 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 227 (digital compass). 228 229 This driver can also be compiled as a set of modules. 230 If so, these modules will be created: 231 - hmc5843_core (core functions) 232 - hmc5843_spi (support for HMC5983) 233 234config SENSORS_RM3100 235 tristate 236 select IIO_BUFFER 237 select IIO_TRIGGERED_BUFFER 238 239config SENSORS_RM3100_I2C 240 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 241 depends on I2C 242 select SENSORS_RM3100 243 select REGMAP_I2C 244 help 245 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 246 247 This driver can also be compiled as a module. 248 To compile this driver as a module, choose M here: the module 249 will be called rm3100-i2c. 250 251config SENSORS_RM3100_SPI 252 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 253 depends on SPI_MASTER 254 select SENSORS_RM3100 255 select REGMAP_SPI 256 help 257 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 258 259 This driver can also be compiled as a module. 260 To compile this driver as a module, choose M here: the module 261 will be called rm3100-spi. 262 263config SI7210 264 tristate "SI7210 Hall effect sensor" 265 depends on I2C 266 select REGMAP_I2C 267 help 268 Say Y here to add support for the SI7210 Hall effect sensor. 269 270 This driver can also be compiled as a module. 271 To compile this driver as a module, choose M here: the module 272 will be called si7210. 273 274config TI_TMAG5273 275 tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor" 276 depends on I2C 277 select REGMAP_I2C 278 help 279 Say Y here to add support for the TI TMAG5273 Low-Power 280 Linear 3D Hall-Effect Sensor. 281 282 This driver can also be compiled as a module. 283 To compile this driver as a module, choose M here: the module 284 will be called tmag5273. 285 286config YAMAHA_YAS530 287 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 288 depends on I2C 289 select REGMAP_I2C 290 select IIO_BUFFER 291 select IIO_TRIGGERED_BUFFER 292 help 293 Say Y here to add support for the Yamaha YAS530 series of 294 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are 295 supported. 296 297 This driver can also be compiled as a module. 298 To compile this driver as a module, choose M here: the module 299 will be called yamaha-yas. 300 301endmenu 302