1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AF8133J 10 tristate "Voltafield AF8133J 3-Axis Magnetometer" 11 depends on I2C 12 depends on OF 13 select REGMAP_I2C 14 select IIO_BUFFER 15 select IIO_TRIGGERED_BUFFER 16 help 17 Say yes here to build support for Voltafield AF8133J I2C-based 18 3-axis magnetometer chip. 19 20 To compile this driver as a module, choose M here: the module 21 will be called af8133j. 22 23config AK8974 24 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 25 depends on I2C 26 select REGMAP_I2C 27 select IIO_BUFFER 28 select IIO_TRIGGERED_BUFFER 29 help 30 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 31 AMI306 I2C-based 3-axis magnetometer chips. 32 33 To compile this driver as a module, choose M here: the module 34 will be called ak8974. 35 36config AK8975 37 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 38 depends on I2C 39 depends on GPIOLIB || COMPILE_TEST 40 select IIO_BUFFER 41 select IIO_TRIGGERED_BUFFER 42 help 43 Say yes here to build support for Asahi Kasei AK8975, AK8963, 44 AK09911, AK09912, AK09916 or AK09918 3-Axis Magnetometer. 45 46 To compile this driver as a module, choose M here: the module 47 will be called ak8975. 48 49config AK09911 50 tristate "Asahi Kasei AK09911 3-axis Compass" 51 depends on I2C 52 depends on GPIOLIB || COMPILE_TEST 53 select AK8975 54 help 55 Deprecated: AK09911 is now supported by AK8975 driver. 56 57config ALS31300 58 tristate "Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor" 59 depends on I2C 60 select REGMAP_I2C 61 select IIO_BUFFER 62 select IIO_TRIGGERED_BUFFER 63 help 64 Say yes here to build support for the Allegro MicroSystems 65 ALS31300 Hall Effect Sensor through its I2C interface. 66 67 To compile this driver as a module, choose M here: the 68 module will be called als31300. 69 70config BMC150_MAGN 71 tristate 72 select IIO_BUFFER 73 select IIO_TRIGGERED_BUFFER 74 75config BMC150_MAGN_I2C 76 tristate "Bosch BMC150 I2C Magnetometer Driver" 77 depends on I2C 78 select BMC150_MAGN 79 select REGMAP_I2C 80 help 81 Say yes here to build support for the BMC150 magnetometer with 82 I2C interface. 83 84 This is a combo module with both accelerometer and magnetometer. 85 This driver is only implementing magnetometer part, which has 86 its own address and register map. 87 88 This driver also supports I2C Bosch BMC156 and BMM150 chips. 89 To compile this driver as a module, choose M here: the module will be 90 called bmc150_magn_i2c. 91 92config BMC150_MAGN_SPI 93 tristate "Bosch BMC150 SPI Magnetometer Driver" 94 depends on SPI 95 select BMC150_MAGN 96 select REGMAP_SPI 97 help 98 Say yes here to build support for the BMC150 magnetometer with 99 SPI interface. 100 101 This is a combo module with both accelerometer and magnetometer. 102 This driver is only implementing magnetometer part, which has 103 its own address and register map. 104 105 This driver also supports SPI Bosch BMC156 and BMM150 chips. 106 To compile this driver as a module, choose M here: the module will be 107 called bmc150_magn_spi. 108 109config MAG3110 110 tristate "Freescale MAG3110 3-Axis Magnetometer" 111 depends on I2C 112 select IIO_BUFFER 113 select IIO_TRIGGERED_BUFFER 114 help 115 Say yes here to build support for the Freescale MAG3110 3-Axis 116 magnetometer. 117 118 To compile this driver as a module, choose M here: the module 119 will be called mag3110. 120 121config HID_SENSOR_MAGNETOMETER_3D 122 depends on HID_SENSOR_HUB 123 select IIO_BUFFER 124 select HID_SENSOR_IIO_COMMON 125 select HID_SENSOR_IIO_TRIGGER 126 tristate "HID Magnetometer 3D" 127 help 128 Say yes here to build support for the HID SENSOR 129 Magnetometer 3D. 130 131config MMC35240 132 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 133 select REGMAP_I2C 134 depends on I2C 135 help 136 Say yes here to build support for the MEMSIC MMC35240 3-axis 137 magnetic sensor. 138 139 To compile this driver as a module, choose M here: the module 140 will be called mmc35240. 141 142config IIO_ST_MAGN_3AXIS 143 tristate "STMicroelectronics magnetometers 3-Axis Driver" 144 depends on (I2C || SPI_MASTER) && SYSFS 145 select IIO_ST_SENSORS_CORE 146 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 147 help 148 Say yes here to build support for STMicroelectronics magnetometers: 149 LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL. 150 151 Also need to enable at least one of I2C and SPI interface drivers 152 below. 153 154config IIO_ST_MAGN_I2C_3AXIS 155 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" 156 depends on I2C && IIO_ST_MAGN_3AXIS 157 default I2C && IIO_ST_MAGN_3AXIS 158 select IIO_ST_SENSORS_I2C 159 help 160 Build support for STMicroelectronics magnetometers I2C interface. 161 162 To compile this driver as a module, choose M here. The module 163 will be called st_magn_i2c. 164 165config IIO_ST_MAGN_SPI_3AXIS 166 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" 167 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS 168 default SPI_MASTER && IIO_ST_MAGN_3AXIS 169 select IIO_ST_SENSORS_SPI 170 help 171 Build support for STMicroelectronics magnetometers SPI interface. 172 173 To compile this driver as a module, choose M here. The module 174 will be called st_magn_spi. 175 176config INFINEON_TLV493D 177 tristate "Infineon TLV493D Low-Power 3D Magnetic Sensor" 178 depends on I2C 179 select IIO_BUFFER 180 select IIO_TRIGGERED_BUFFER 181 help 182 Say Y here to add support for the Infineon TLV493D-A1B6 Low- 183 Power 3D Magnetic Sensor. 184 185 This driver can also be compiled as a module. 186 To compile this driver as a module, choose M here: the module 187 will be called tlv493d. 188 189config SENSORS_HMC5843 190 tristate 191 select IIO_BUFFER 192 select IIO_TRIGGERED_BUFFER 193 194config SENSORS_HMC5843_I2C 195 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 196 depends on I2C 197 select SENSORS_HMC5843 198 select REGMAP_I2C 199 help 200 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 201 HMC5883L 3-Axis Magnetometer (digital compass). 202 203 This driver can also be compiled as a set of modules. 204 If so, these modules will be created: 205 - hmc5843_core (core functions) 206 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 207 208config SENSORS_HMC5843_SPI 209 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 210 depends on SPI_MASTER 211 select SENSORS_HMC5843 212 select REGMAP_SPI 213 help 214 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 215 (digital compass). 216 217 This driver can also be compiled as a set of modules. 218 If so, these modules will be created: 219 - hmc5843_core (core functions) 220 - hmc5843_spi (support for HMC5983) 221 222config SENSORS_RM3100 223 tristate 224 select IIO_BUFFER 225 select IIO_TRIGGERED_BUFFER 226 227config SENSORS_RM3100_I2C 228 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 229 depends on I2C 230 select SENSORS_RM3100 231 select REGMAP_I2C 232 help 233 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 234 235 This driver can also be compiled as a module. 236 To compile this driver as a module, choose M here: the module 237 will be called rm3100-i2c. 238 239config SENSORS_RM3100_SPI 240 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 241 depends on SPI_MASTER 242 select SENSORS_RM3100 243 select REGMAP_SPI 244 help 245 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 246 247 This driver can also be compiled as a module. 248 To compile this driver as a module, choose M here: the module 249 will be called rm3100-spi. 250 251config SI7210 252 tristate "SI7210 Hall effect sensor" 253 depends on I2C 254 select REGMAP_I2C 255 help 256 Say Y here to add support for the SI7210 Hall effect sensor. 257 258 This driver can also be compiled as a module. 259 To compile this driver as a module, choose M here: the module 260 will be called si7210. 261 262config TI_TMAG5273 263 tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor" 264 depends on I2C 265 select REGMAP_I2C 266 help 267 Say Y here to add support for the TI TMAG5273 Low-Power 268 Linear 3D Hall-Effect Sensor. 269 270 This driver can also be compiled as a module. 271 To compile this driver as a module, choose M here: the module 272 will be called tmag5273. 273 274config YAMAHA_YAS530 275 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 276 depends on I2C 277 select REGMAP_I2C 278 select IIO_BUFFER 279 select IIO_TRIGGERED_BUFFER 280 help 281 Say Y here to add support for the Yamaha YAS530 series of 282 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are 283 supported. 284 285 This driver can also be compiled as a module. 286 To compile this driver as a module, choose M here: the module 287 will be called yamaha-yas. 288 289endmenu 290