1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AF8133J 10 tristate "Voltafield AF8133J 3-Axis Magnetometer" 11 depends on I2C 12 depends on OF 13 select REGMAP_I2C 14 select IIO_BUFFER 15 select IIO_TRIGGERED_BUFFER 16 help 17 Say yes here to build support for Voltafield AF8133J I2C-based 18 3-axis magnetometer chip. 19 20 To compile this driver as a module, choose M here: the module 21 will be called af8133j. 22 23config AK8974 24 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 25 depends on I2C 26 select REGMAP_I2C 27 select IIO_BUFFER 28 select IIO_TRIGGERED_BUFFER 29 help 30 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 31 AMI306 I2C-based 3-axis magnetometer chips. 32 33 To compile this driver as a module, choose M here: the module 34 will be called ak8974. 35 36config AK8975 37 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 38 depends on I2C 39 depends on GPIOLIB || COMPILE_TEST 40 select IIO_BUFFER 41 select IIO_TRIGGERED_BUFFER 42 help 43 Say yes here to build support for Asahi Kasei AK8975, AK8963, 44 AK09911, AK09912, AK09916 or AK09918 3-Axis Magnetometer. 45 46 To compile this driver as a module, choose M here: the module 47 will be called ak8975. 48 49config AK09911 50 tristate "Asahi Kasei AK09911 3-axis Compass" 51 depends on I2C 52 depends on GPIOLIB || COMPILE_TEST 53 select AK8975 54 help 55 Deprecated: AK09911 is now supported by AK8975 driver. 56 57config ALS31300 58 tristate "Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor" 59 depends on I2C 60 select REGMAP_I2C 61 select IIO_BUFFER 62 select IIO_TRIGGERED_BUFFER 63 help 64 Say yes here to build support for the Allegro MicroSystems 65 ALS31300 Hall Effect Sensor through its I2C interface. 66 67 To compile this driver as a module, choose M here: the 68 module will be called als31300. 69 70config BMC150_MAGN 71 tristate 72 select IIO_BUFFER 73 select IIO_TRIGGERED_BUFFER 74 75config BMC150_MAGN_I2C 76 tristate "Bosch BMC150 I2C Magnetometer Driver" 77 depends on I2C 78 select BMC150_MAGN 79 select REGMAP_I2C 80 help 81 Say yes here to build support for the BMC150 magnetometer with 82 I2C interface. 83 84 This is a combo module with both accelerometer and magnetometer. 85 This driver is only implementing magnetometer part, which has 86 its own address and register map. 87 88 This driver also supports I2C Bosch BMC156 and BMM150 chips. 89 To compile this driver as a module, choose M here: the module will be 90 called bmc150_magn_i2c. 91 92config BMC150_MAGN_SPI 93 tristate "Bosch BMC150 SPI Magnetometer Driver" 94 depends on SPI 95 select BMC150_MAGN 96 select REGMAP_SPI 97 help 98 Say yes here to build support for the BMC150 magnetometer with 99 SPI interface. 100 101 This is a combo module with both accelerometer and magnetometer. 102 This driver is only implementing magnetometer part, which has 103 its own address and register map. 104 105 This driver also supports SPI Bosch BMC156 and BMM150 chips. 106 To compile this driver as a module, choose M here: the module will be 107 called bmc150_magn_spi. 108 109config MAG3110 110 tristate "Freescale MAG3110 3-Axis Magnetometer" 111 depends on I2C 112 select IIO_BUFFER 113 select IIO_TRIGGERED_BUFFER 114 help 115 Say yes here to build support for the Freescale MAG3110 3-Axis 116 magnetometer. 117 118 To compile this driver as a module, choose M here: the module 119 will be called mag3110. 120 121config HID_SENSOR_MAGNETOMETER_3D 122 depends on HID_SENSOR_HUB 123 select IIO_BUFFER 124 select HID_SENSOR_IIO_COMMON 125 select HID_SENSOR_IIO_TRIGGER 126 tristate "HID Magnetometer 3D" 127 help 128 Say yes here to build support for the HID SENSOR 129 Magnetometer 3D. 130 131config MMC35240 132 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 133 select REGMAP_I2C 134 depends on I2C 135 help 136 Say yes here to build support for the MEMSIC MMC35240 3-axis 137 magnetic sensor. 138 139 To compile this driver as a module, choose M here: the module 140 will be called mmc35240. 141 142config MMC5633 143 tristate "MEMSIC MMC5633 3-axis magnetic sensor" 144 select REGMAP_I2C 145 select REGMAP_I3C if I3C 146 depends on I2C 147 depends on I3C || !I3C 148 help 149 Say yes here to build support for the MEMSIC MMC5633 3-axis 150 magnetic sensor. 151 152 To compile this driver as a module, choose M here: the module 153 will be called mmc5633 154 155config IIO_ST_MAGN_3AXIS 156 tristate "STMicroelectronics magnetometers 3-Axis Driver" 157 depends on (I2C || SPI_MASTER) && SYSFS 158 select IIO_ST_SENSORS_CORE 159 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 160 help 161 Say yes here to build support for STMicroelectronics magnetometers: 162 LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL. 163 164 Also need to enable at least one of I2C and SPI interface drivers 165 below. 166 167config IIO_ST_MAGN_I2C_3AXIS 168 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" 169 depends on I2C && IIO_ST_MAGN_3AXIS 170 default I2C && IIO_ST_MAGN_3AXIS 171 select IIO_ST_SENSORS_I2C 172 help 173 Build support for STMicroelectronics magnetometers I2C interface. 174 175 To compile this driver as a module, choose M here. The module 176 will be called st_magn_i2c. 177 178config IIO_ST_MAGN_SPI_3AXIS 179 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" 180 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS 181 default SPI_MASTER && IIO_ST_MAGN_3AXIS 182 select IIO_ST_SENSORS_SPI 183 help 184 Build support for STMicroelectronics magnetometers SPI interface. 185 186 To compile this driver as a module, choose M here. The module 187 will be called st_magn_spi. 188 189config INFINEON_TLV493D 190 tristate "Infineon TLV493D Low-Power 3D Magnetic Sensor" 191 depends on I2C 192 select IIO_BUFFER 193 select IIO_TRIGGERED_BUFFER 194 help 195 Say Y here to add support for the Infineon TLV493D-A1B6 Low- 196 Power 3D Magnetic Sensor. 197 198 This driver can also be compiled as a module. 199 To compile this driver as a module, choose M here: the module 200 will be called tlv493d. 201 202config SENSORS_HMC5843 203 tristate 204 select IIO_BUFFER 205 select IIO_TRIGGERED_BUFFER 206 207config SENSORS_HMC5843_I2C 208 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 209 depends on I2C 210 select SENSORS_HMC5843 211 select REGMAP_I2C 212 help 213 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 214 HMC5883L 3-Axis Magnetometer (digital compass). 215 216 This driver can also be compiled as a set of modules. 217 If so, these modules will be created: 218 - hmc5843_core (core functions) 219 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 220 221config SENSORS_HMC5843_SPI 222 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 223 depends on SPI_MASTER 224 select SENSORS_HMC5843 225 select REGMAP_SPI 226 help 227 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 228 (digital compass). 229 230 This driver can also be compiled as a set of modules. 231 If so, these modules will be created: 232 - hmc5843_core (core functions) 233 - hmc5843_spi (support for HMC5983) 234 235config SENSORS_RM3100 236 tristate 237 select IIO_BUFFER 238 select IIO_TRIGGERED_BUFFER 239 240config SENSORS_RM3100_I2C 241 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 242 depends on I2C 243 select SENSORS_RM3100 244 select REGMAP_I2C 245 help 246 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 247 248 This driver can also be compiled as a module. 249 To compile this driver as a module, choose M here: the module 250 will be called rm3100-i2c. 251 252config SENSORS_RM3100_SPI 253 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 254 depends on SPI_MASTER 255 select SENSORS_RM3100 256 select REGMAP_SPI 257 help 258 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 259 260 This driver can also be compiled as a module. 261 To compile this driver as a module, choose M here: the module 262 will be called rm3100-spi. 263 264config SI7210 265 tristate "SI7210 Hall effect sensor" 266 depends on I2C 267 select REGMAP_I2C 268 help 269 Say Y here to add support for the SI7210 Hall effect sensor. 270 271 This driver can also be compiled as a module. 272 To compile this driver as a module, choose M here: the module 273 will be called si7210. 274 275config TI_TMAG5273 276 tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor" 277 depends on I2C 278 select REGMAP_I2C 279 help 280 Say Y here to add support for the TI TMAG5273 Low-Power 281 Linear 3D Hall-Effect Sensor. 282 283 This driver can also be compiled as a module. 284 To compile this driver as a module, choose M here: the module 285 will be called tmag5273. 286 287config YAMAHA_YAS530 288 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 289 depends on I2C 290 select REGMAP_I2C 291 select IIO_BUFFER 292 select IIO_TRIGGERED_BUFFER 293 help 294 Say Y here to add support for the Yamaha YAS530 series of 295 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are 296 supported. 297 298 This driver can also be compiled as a module. 299 To compile this driver as a module, choose M here: the module 300 will be called yamaha-yas. 301 302endmenu 303