1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AF8133J 10 tristate "Voltafield AF8133J 3-Axis Magnetometer" 11 depends on I2C 12 depends on OF 13 select REGMAP_I2C 14 help 15 Say yes here to build support for Voltafield AF8133J I2C-based 16 3-axis magnetometer chip. 17 18 To compile this driver as a module, choose M here: the module 19 will be called af8133j. 20 21config AK8974 22 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 23 depends on I2C 24 select REGMAP_I2C 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 help 28 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 29 AMI306 I2C-based 3-axis magnetometer chips. 30 31 To compile this driver as a module, choose M here: the module 32 will be called ak8974. 33 34config AK8975 35 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 36 depends on I2C 37 depends on GPIOLIB || COMPILE_TEST 38 select IIO_BUFFER 39 select IIO_TRIGGERED_BUFFER 40 help 41 Say yes here to build support for Asahi Kasei AK8975, AK8963, 42 AK09911, AK09912, AK09916 or AK09918 3-Axis Magnetometer. 43 44 To compile this driver as a module, choose M here: the module 45 will be called ak8975. 46 47config AK09911 48 tristate "Asahi Kasei AK09911 3-axis Compass" 49 depends on I2C 50 depends on GPIOLIB || COMPILE_TEST 51 select AK8975 52 help 53 Deprecated: AK09911 is now supported by AK8975 driver. 54 55config BMC150_MAGN 56 tristate 57 select IIO_BUFFER 58 select IIO_TRIGGERED_BUFFER 59 60config BMC150_MAGN_I2C 61 tristate "Bosch BMC150 I2C Magnetometer Driver" 62 depends on I2C 63 select BMC150_MAGN 64 select REGMAP_I2C 65 help 66 Say yes here to build support for the BMC150 magnetometer with 67 I2C interface. 68 69 This is a combo module with both accelerometer and magnetometer. 70 This driver is only implementing magnetometer part, which has 71 its own address and register map. 72 73 This driver also supports I2C Bosch BMC156 and BMM150 chips. 74 To compile this driver as a module, choose M here: the module will be 75 called bmc150_magn_i2c. 76 77config BMC150_MAGN_SPI 78 tristate "Bosch BMC150 SPI Magnetometer Driver" 79 depends on SPI 80 select BMC150_MAGN 81 select REGMAP_SPI 82 help 83 Say yes here to build support for the BMC150 magnetometer with 84 SPI interface. 85 86 This is a combo module with both accelerometer and magnetometer. 87 This driver is only implementing magnetometer part, which has 88 its own address and register map. 89 90 This driver also supports SPI Bosch BMC156 and BMM150 chips. 91 To compile this driver as a module, choose M here: the module will be 92 called bmc150_magn_spi. 93 94config MAG3110 95 tristate "Freescale MAG3110 3-Axis Magnetometer" 96 depends on I2C 97 select IIO_BUFFER 98 select IIO_TRIGGERED_BUFFER 99 help 100 Say yes here to build support for the Freescale MAG3110 3-Axis 101 magnetometer. 102 103 To compile this driver as a module, choose M here: the module 104 will be called mag3110. 105 106config HID_SENSOR_MAGNETOMETER_3D 107 depends on HID_SENSOR_HUB 108 select IIO_BUFFER 109 select HID_SENSOR_IIO_COMMON 110 select HID_SENSOR_IIO_TRIGGER 111 tristate "HID Magenetometer 3D" 112 help 113 Say yes here to build support for the HID SENSOR 114 Magnetometer 3D. 115 116config MMC35240 117 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 118 select REGMAP_I2C 119 depends on I2C 120 help 121 Say yes here to build support for the MEMSIC MMC35240 3-axis 122 magnetic sensor. 123 124 To compile this driver as a module, choose M here: the module 125 will be called mmc35240. 126 127config IIO_ST_MAGN_3AXIS 128 tristate "STMicroelectronics magnetometers 3-Axis Driver" 129 depends on (I2C || SPI_MASTER) && SYSFS 130 select IIO_ST_SENSORS_CORE 131 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 132 help 133 Say yes here to build support for STMicroelectronics magnetometers: 134 LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL. 135 136 Also need to enable at least one of I2C and SPI interface drivers 137 below. 138 139config IIO_ST_MAGN_I2C_3AXIS 140 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" 141 depends on I2C && IIO_ST_MAGN_3AXIS 142 default I2C && IIO_ST_MAGN_3AXIS 143 select IIO_ST_SENSORS_I2C 144 help 145 Build support for STMicroelectronics magnetometers I2C interface. 146 147 To compile this driver as a module, choose M here. The module 148 will be called st_magn_i2c. 149 150config IIO_ST_MAGN_SPI_3AXIS 151 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" 152 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS 153 default SPI_MASTER && IIO_ST_MAGN_3AXIS 154 select IIO_ST_SENSORS_SPI 155 help 156 Build support for STMicroelectronics magnetometers SPI interface. 157 158 To compile this driver as a module, choose M here. The module 159 will be called st_magn_spi. 160 161config SENSORS_HMC5843 162 tristate 163 select IIO_BUFFER 164 select IIO_TRIGGERED_BUFFER 165 166config SENSORS_HMC5843_I2C 167 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 168 depends on I2C 169 select SENSORS_HMC5843 170 select REGMAP_I2C 171 help 172 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 173 HMC5883L 3-Axis Magnetometer (digital compass). 174 175 This driver can also be compiled as a set of modules. 176 If so, these modules will be created: 177 - hmc5843_core (core functions) 178 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 179 180config SENSORS_HMC5843_SPI 181 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 182 depends on SPI_MASTER 183 select SENSORS_HMC5843 184 select REGMAP_SPI 185 help 186 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 187 (digital compass). 188 189 This driver can also be compiled as a set of modules. 190 If so, these modules will be created: 191 - hmc5843_core (core functions) 192 - hmc5843_spi (support for HMC5983) 193 194config SENSORS_RM3100 195 tristate 196 select IIO_BUFFER 197 select IIO_TRIGGERED_BUFFER 198 199config SENSORS_RM3100_I2C 200 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 201 depends on I2C 202 select SENSORS_RM3100 203 select REGMAP_I2C 204 help 205 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 206 207 This driver can also be compiled as a module. 208 To compile this driver as a module, choose M here: the module 209 will be called rm3100-i2c. 210 211config SENSORS_RM3100_SPI 212 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 213 depends on SPI_MASTER 214 select SENSORS_RM3100 215 select REGMAP_SPI 216 help 217 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 218 219 This driver can also be compiled as a module. 220 To compile this driver as a module, choose M here: the module 221 will be called rm3100-spi. 222 223config TI_TMAG5273 224 tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor" 225 depends on I2C 226 select REGMAP_I2C 227 help 228 Say Y here to add support for the TI TMAG5273 Low-Power 229 Linear 3D Hall-Effect Sensor. 230 231 This driver can also be compiled as a module. 232 To compile this driver as a module, choose M here: the module 233 will be called tmag5273. 234 235config YAMAHA_YAS530 236 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 237 depends on I2C 238 select REGMAP_I2C 239 select IIO_BUFFER 240 select IIO_TRIGGERED_BUFFER 241 help 242 Say Y here to add support for the Yamaha YAS530 series of 243 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are 244 supported. 245 246 This driver can also be compiled as a module. 247 To compile this driver as a module, choose M here: the module 248 will be called yamaha-yas. 249 250endmenu 251