1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AF8133J 10 tristate "Voltafield AF8133J 3-Axis Magnetometer" 11 depends on I2C 12 depends on OF 13 select REGMAP_I2C 14 select IIO_BUFFER 15 select IIO_TRIGGERED_BUFFER 16 help 17 Say yes here to build support for Voltafield AF8133J I2C-based 18 3-axis magnetometer chip. 19 20 To compile this driver as a module, choose M here: the module 21 will be called af8133j. 22 23config AK8974 24 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 25 depends on I2C 26 select REGMAP_I2C 27 select IIO_BUFFER 28 select IIO_TRIGGERED_BUFFER 29 help 30 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 31 AMI306 I2C-based 3-axis magnetometer chips. 32 33 To compile this driver as a module, choose M here: the module 34 will be called ak8974. 35 36config AK8975 37 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 38 depends on I2C 39 depends on GPIOLIB || COMPILE_TEST 40 select IIO_BUFFER 41 select IIO_TRIGGERED_BUFFER 42 help 43 Say yes here to build support for Asahi Kasei AK8975, AK8963, 44 AK09911, AK09912, AK09916 or AK09918 3-Axis Magnetometer. 45 46 To compile this driver as a module, choose M here: the module 47 will be called ak8975. 48 49config AK09911 50 tristate "Asahi Kasei AK09911 3-axis Compass" 51 depends on I2C 52 depends on GPIOLIB || COMPILE_TEST 53 select AK8975 54 help 55 Deprecated: AK09911 is now supported by AK8975 driver. 56 57config ALS31300 58 tristate "Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor" 59 depends on I2C 60 select REGMAP_I2C 61 select IIO_BUFFER 62 select IIO_TRIGGERED_BUFFER 63 help 64 Say yes here to build support for the Allegro MicroSystems 65 ALS31300 Hall Effect Sensor through its I2C interface. 66 67 To compile this driver as a module, choose M here: the 68 module will be called als31300. 69 70config BMC150_MAGN 71 tristate 72 select IIO_BUFFER 73 select IIO_TRIGGERED_BUFFER 74 75config BMC150_MAGN_I2C 76 tristate "Bosch BMC150 I2C Magnetometer Driver" 77 depends on I2C 78 select BMC150_MAGN 79 select REGMAP_I2C 80 help 81 Say yes here to build support for the BMC150 magnetometer with 82 I2C interface. 83 84 This is a combo module with both accelerometer and magnetometer. 85 This driver is only implementing magnetometer part, which has 86 its own address and register map. 87 88 This driver also supports I2C Bosch BMC156 and BMM150 chips. 89 To compile this driver as a module, choose M here: the module will be 90 called bmc150_magn_i2c. 91 92config BMC150_MAGN_SPI 93 tristate "Bosch BMC150 SPI Magnetometer Driver" 94 depends on SPI 95 select BMC150_MAGN 96 select REGMAP_SPI 97 help 98 Say yes here to build support for the BMC150 magnetometer with 99 SPI interface. 100 101 This is a combo module with both accelerometer and magnetometer. 102 This driver is only implementing magnetometer part, which has 103 its own address and register map. 104 105 This driver also supports SPI Bosch BMC156 and BMM150 chips. 106 To compile this driver as a module, choose M here: the module will be 107 called bmc150_magn_spi. 108 109config MAG3110 110 tristate "Freescale MAG3110 3-Axis Magnetometer" 111 depends on I2C 112 select IIO_BUFFER 113 select IIO_TRIGGERED_BUFFER 114 help 115 Say yes here to build support for the Freescale MAG3110 3-Axis 116 magnetometer. 117 118 To compile this driver as a module, choose M here: the module 119 will be called mag3110. 120 121config HID_SENSOR_MAGNETOMETER_3D 122 depends on HID_SENSOR_HUB 123 select IIO_BUFFER 124 select HID_SENSOR_IIO_COMMON 125 select HID_SENSOR_IIO_TRIGGER 126 tristate "HID Magenetometer 3D" 127 help 128 Say yes here to build support for the HID SENSOR 129 Magnetometer 3D. 130 131config MMC35240 132 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 133 select REGMAP_I2C 134 depends on I2C 135 help 136 Say yes here to build support for the MEMSIC MMC35240 3-axis 137 magnetic sensor. 138 139 To compile this driver as a module, choose M here: the module 140 will be called mmc35240. 141 142config IIO_ST_MAGN_3AXIS 143 tristate "STMicroelectronics magnetometers 3-Axis Driver" 144 depends on (I2C || SPI_MASTER) && SYSFS 145 select IIO_ST_SENSORS_CORE 146 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 147 help 148 Say yes here to build support for STMicroelectronics magnetometers: 149 LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL. 150 151 Also need to enable at least one of I2C and SPI interface drivers 152 below. 153 154config IIO_ST_MAGN_I2C_3AXIS 155 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" 156 depends on I2C && IIO_ST_MAGN_3AXIS 157 default I2C && IIO_ST_MAGN_3AXIS 158 select IIO_ST_SENSORS_I2C 159 help 160 Build support for STMicroelectronics magnetometers I2C interface. 161 162 To compile this driver as a module, choose M here. The module 163 will be called st_magn_i2c. 164 165config IIO_ST_MAGN_SPI_3AXIS 166 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" 167 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS 168 default SPI_MASTER && IIO_ST_MAGN_3AXIS 169 select IIO_ST_SENSORS_SPI 170 help 171 Build support for STMicroelectronics magnetometers SPI interface. 172 173 To compile this driver as a module, choose M here. The module 174 will be called st_magn_spi. 175 176config SENSORS_HMC5843 177 tristate 178 select IIO_BUFFER 179 select IIO_TRIGGERED_BUFFER 180 181config SENSORS_HMC5843_I2C 182 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 183 depends on I2C 184 select SENSORS_HMC5843 185 select REGMAP_I2C 186 help 187 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 188 HMC5883L 3-Axis Magnetometer (digital compass). 189 190 This driver can also be compiled as a set of modules. 191 If so, these modules will be created: 192 - hmc5843_core (core functions) 193 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 194 195config SENSORS_HMC5843_SPI 196 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 197 depends on SPI_MASTER 198 select SENSORS_HMC5843 199 select REGMAP_SPI 200 help 201 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 202 (digital compass). 203 204 This driver can also be compiled as a set of modules. 205 If so, these modules will be created: 206 - hmc5843_core (core functions) 207 - hmc5843_spi (support for HMC5983) 208 209config SENSORS_RM3100 210 tristate 211 select IIO_BUFFER 212 select IIO_TRIGGERED_BUFFER 213 214config SENSORS_RM3100_I2C 215 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 216 depends on I2C 217 select SENSORS_RM3100 218 select REGMAP_I2C 219 help 220 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 221 222 This driver can also be compiled as a module. 223 To compile this driver as a module, choose M here: the module 224 will be called rm3100-i2c. 225 226config SENSORS_RM3100_SPI 227 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 228 depends on SPI_MASTER 229 select SENSORS_RM3100 230 select REGMAP_SPI 231 help 232 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 233 234 This driver can also be compiled as a module. 235 To compile this driver as a module, choose M here: the module 236 will be called rm3100-spi. 237 238config TI_TMAG5273 239 tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor" 240 depends on I2C 241 select REGMAP_I2C 242 help 243 Say Y here to add support for the TI TMAG5273 Low-Power 244 Linear 3D Hall-Effect Sensor. 245 246 This driver can also be compiled as a module. 247 To compile this driver as a module, choose M here: the module 248 will be called tmag5273. 249 250config YAMAHA_YAS530 251 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 252 depends on I2C 253 select REGMAP_I2C 254 select IIO_BUFFER 255 select IIO_TRIGGERED_BUFFER 256 help 257 Say Y here to add support for the Yamaha YAS530 series of 258 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are 259 supported. 260 261 This driver can also be compiled as a module. 262 To compile this driver as a module, choose M here: the module 263 will be called yamaha-yas. 264 265endmenu 266