1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Common code for Freescale MMA955x Intelligent Sensor Platform drivers
4 * Copyright (c) 2014, Intel Corporation.
5 */
6
7 #include <linux/module.h>
8 #include <linux/i2c.h>
9 #include <linux/delay.h>
10 #include <linux/iio/iio.h>
11 #include <linux/pm_runtime.h>
12 #include "mma9551_core.h"
13
14 /* Command masks for mailbox write command */
15 #define MMA9551_CMD_READ_VERSION_INFO 0x00
16 #define MMA9551_CMD_READ_CONFIG 0x10
17 #define MMA9551_CMD_WRITE_CONFIG 0x20
18 #define MMA9551_CMD_READ_STATUS 0x30
19
20 /* Mailbox read command */
21 #define MMA9551_RESPONSE_COCO BIT(7)
22
23 /* Error-Status codes returned in mailbox read command */
24 #define MMA9551_MCI_ERROR_NONE 0x00
25 #define MMA9551_MCI_ERROR_PARAM 0x04
26 #define MMA9551_MCI_INVALID_COUNT 0x19
27 #define MMA9551_MCI_ERROR_COMMAND 0x1C
28 #define MMA9551_MCI_ERROR_INVALID_LENGTH 0x21
29 #define MMA9551_MCI_ERROR_FIFO_BUSY 0x22
30 #define MMA9551_MCI_ERROR_FIFO_ALLOCATED 0x23
31 #define MMA9551_MCI_ERROR_FIFO_OVERSIZE 0x24
32
33 /* GPIO Application */
34 #define MMA9551_GPIO_POL_MSB 0x08
35 #define MMA9551_GPIO_POL_LSB 0x09
36
37 /* Sleep/Wake application */
38 #define MMA9551_SLEEP_CFG 0x06
39 #define MMA9551_SLEEP_CFG_SNCEN BIT(0)
40 #define MMA9551_SLEEP_CFG_FLEEN BIT(1)
41 #define MMA9551_SLEEP_CFG_SCHEN BIT(2)
42
43 /* AFE application */
44 #define MMA9551_AFE_X_ACCEL_REG 0x00
45 #define MMA9551_AFE_Y_ACCEL_REG 0x02
46 #define MMA9551_AFE_Z_ACCEL_REG 0x04
47
48 /* Reset/Suspend/Clear application */
49 #define MMA9551_RSC_RESET 0x00
50 #define MMA9551_RSC_OFFSET(mask) (3 - (ffs(mask) - 1) / 8)
51 #define MMA9551_RSC_VAL(mask) (mask >> (((ffs(mask) - 1) / 8) * 8))
52
53 /*
54 * A response is composed of:
55 * - control registers: MB0-3
56 * - data registers: MB4-31
57 *
58 * A request is composed of:
59 * - mbox to write to (always 0)
60 * - control registers: MB1-4
61 * - data registers: MB5-31
62 */
63 #define MMA9551_MAILBOX_CTRL_REGS 4
64 #define MMA9551_MAX_MAILBOX_DATA_REGS 28
65 #define MMA9551_MAILBOX_REGS 32
66
67 #define MMA9551_I2C_READ_RETRIES 5
68 #define MMA9551_I2C_READ_DELAY 50 /* us */
69
70 struct mma9551_mbox_request {
71 u8 start_mbox; /* Always 0. */
72 u8 app_id;
73 /*
74 * See Section 5.3.1 of the MMA955xL Software Reference Manual.
75 *
76 * Bit 7: reserved, always 0
77 * Bits 6-4: command
78 * Bits 3-0: upper bits of register offset
79 */
80 u8 cmd_off;
81 u8 lower_off;
82 u8 nbytes;
83 u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS - 1];
84 } __packed;
85
86 struct mma9551_mbox_response {
87 u8 app_id;
88 /*
89 * See Section 5.3.3 of the MMA955xL Software Reference Manual.
90 *
91 * Bit 7: COCO
92 * Bits 6-0: Error code.
93 */
94 u8 coco_err;
95 u8 nbytes;
96 u8 req_bytes;
97 u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS];
98 } __packed;
99
100 struct mma9551_version_info {
101 __be32 device_id;
102 u8 rom_version[2];
103 u8 fw_version[2];
104 u8 hw_version[2];
105 u8 fw_build[2];
106 };
107
mma9551_transfer(struct i2c_client * client,u8 app_id,u8 command,u16 offset,u8 * inbytes,int num_inbytes,u8 * outbytes,int num_outbytes)108 static int mma9551_transfer(struct i2c_client *client,
109 u8 app_id, u8 command, u16 offset,
110 u8 *inbytes, int num_inbytes,
111 u8 *outbytes, int num_outbytes)
112 {
113 struct mma9551_mbox_request req;
114 struct mma9551_mbox_response rsp;
115 struct i2c_msg in, out;
116 u8 req_len, err_code;
117 int ret, retries;
118
119 if (offset >= 1 << 12) {
120 dev_err(&client->dev, "register offset too large\n");
121 return -EINVAL;
122 }
123
124 req_len = 1 + MMA9551_MAILBOX_CTRL_REGS + num_inbytes;
125 req.start_mbox = 0;
126 req.app_id = app_id;
127 req.cmd_off = command | (offset >> 8);
128 req.lower_off = offset;
129
130 if (command == MMA9551_CMD_WRITE_CONFIG)
131 req.nbytes = num_inbytes;
132 else
133 req.nbytes = num_outbytes;
134 if (num_inbytes)
135 memcpy(req.buf, inbytes, num_inbytes);
136
137 out.addr = client->addr;
138 out.flags = 0;
139 out.len = req_len;
140 out.buf = (u8 *)&req;
141
142 ret = i2c_transfer(client->adapter, &out, 1);
143 if (ret < 0) {
144 dev_err(&client->dev, "i2c write failed\n");
145 return ret;
146 }
147
148 retries = MMA9551_I2C_READ_RETRIES;
149 do {
150 udelay(MMA9551_I2C_READ_DELAY);
151
152 in.addr = client->addr;
153 in.flags = I2C_M_RD;
154 in.len = sizeof(rsp);
155 in.buf = (u8 *)&rsp;
156
157 ret = i2c_transfer(client->adapter, &in, 1);
158 if (ret < 0) {
159 dev_err(&client->dev, "i2c read failed\n");
160 return ret;
161 }
162
163 if (rsp.coco_err & MMA9551_RESPONSE_COCO)
164 break;
165 } while (--retries > 0);
166
167 if (retries == 0) {
168 dev_err(&client->dev,
169 "timed out while waiting for command response\n");
170 return -ETIMEDOUT;
171 }
172
173 if (rsp.app_id != app_id) {
174 dev_err(&client->dev,
175 "app_id mismatch in response got %02x expected %02x\n",
176 rsp.app_id, app_id);
177 return -EINVAL;
178 }
179
180 err_code = rsp.coco_err & ~MMA9551_RESPONSE_COCO;
181 if (err_code != MMA9551_MCI_ERROR_NONE) {
182 dev_err(&client->dev, "read returned error %x\n", err_code);
183 return -EINVAL;
184 }
185
186 if (rsp.nbytes != rsp.req_bytes) {
187 dev_err(&client->dev,
188 "output length mismatch got %d expected %d\n",
189 rsp.nbytes, rsp.req_bytes);
190 return -EINVAL;
191 }
192
193 if (num_outbytes)
194 memcpy(outbytes, rsp.buf, num_outbytes);
195
196 return 0;
197 }
198
199 /**
200 * mma9551_read_config_byte() - read 1 configuration byte
201 * @client: I2C client
202 * @app_id: Application ID
203 * @reg: Application register
204 * @val: Pointer to store value read
205 *
206 * Read one configuration byte from the device using MMA955xL command format.
207 * Commands to the MMA955xL platform consist of a write followed
208 * by one or more reads.
209 *
210 * Locking note: This function must be called with the device lock held.
211 * Locking is not handled inside the function. Callers should ensure they
212 * serialize access to the HW.
213 *
214 * Returns: 0 on success, negative value on failure.
215 */
mma9551_read_config_byte(struct i2c_client * client,u8 app_id,u16 reg,u8 * val)216 int mma9551_read_config_byte(struct i2c_client *client, u8 app_id,
217 u16 reg, u8 *val)
218 {
219 return mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
220 reg, NULL, 0, val, 1);
221 }
222 EXPORT_SYMBOL_NS(mma9551_read_config_byte, IIO_MMA9551);
223
224 /**
225 * mma9551_write_config_byte() - write 1 configuration byte
226 * @client: I2C client
227 * @app_id: Application ID
228 * @reg: Application register
229 * @val: Value to write
230 *
231 * Write one configuration byte from the device using MMA955xL command format.
232 * Commands to the MMA955xL platform consist of a write followed by one or
233 * more reads.
234 *
235 * Locking note: This function must be called with the device lock held.
236 * Locking is not handled inside the function. Callers should ensure they
237 * serialize access to the HW.
238 *
239 * Returns: 0 on success, negative value on failure.
240 */
mma9551_write_config_byte(struct i2c_client * client,u8 app_id,u16 reg,u8 val)241 int mma9551_write_config_byte(struct i2c_client *client, u8 app_id,
242 u16 reg, u8 val)
243 {
244 return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg,
245 &val, 1, NULL, 0);
246 }
247 EXPORT_SYMBOL_NS(mma9551_write_config_byte, IIO_MMA9551);
248
249 /**
250 * mma9551_read_status_byte() - read 1 status byte
251 * @client: I2C client
252 * @app_id: Application ID
253 * @reg: Application register
254 * @val: Pointer to store value read
255 *
256 * Read one status byte from the device using MMA955xL command format.
257 * Commands to the MMA955xL platform consist of a write followed by one or
258 * more reads.
259 *
260 * Locking note: This function must be called with the device lock held.
261 * Locking is not handled inside the function. Callers should ensure they
262 * serialize access to the HW.
263 *
264 * Returns: 0 on success, negative value on failure.
265 */
mma9551_read_status_byte(struct i2c_client * client,u8 app_id,u16 reg,u8 * val)266 int mma9551_read_status_byte(struct i2c_client *client, u8 app_id,
267 u16 reg, u8 *val)
268 {
269 return mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
270 reg, NULL, 0, val, 1);
271 }
272 EXPORT_SYMBOL_NS(mma9551_read_status_byte, IIO_MMA9551);
273
274 /**
275 * mma9551_read_config_word() - read 1 config word
276 * @client: I2C client
277 * @app_id: Application ID
278 * @reg: Application register
279 * @val: Pointer to store value read
280 *
281 * Read one configuration word from the device using MMA955xL command format.
282 * Commands to the MMA955xL platform consist of a write followed by one or
283 * more reads.
284 *
285 * Locking note: This function must be called with the device lock held.
286 * Locking is not handled inside the function. Callers should ensure they
287 * serialize access to the HW.
288 *
289 * Returns: 0 on success, negative value on failure.
290 */
mma9551_read_config_word(struct i2c_client * client,u8 app_id,u16 reg,u16 * val)291 int mma9551_read_config_word(struct i2c_client *client, u8 app_id,
292 u16 reg, u16 *val)
293 {
294 int ret;
295 __be16 v;
296
297 ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
298 reg, NULL, 0, (u8 *)&v, 2);
299 if (ret < 0)
300 return ret;
301
302 *val = be16_to_cpu(v);
303
304 return 0;
305 }
306 EXPORT_SYMBOL_NS(mma9551_read_config_word, IIO_MMA9551);
307
308 /**
309 * mma9551_write_config_word() - write 1 config word
310 * @client: I2C client
311 * @app_id: Application ID
312 * @reg: Application register
313 * @val: Value to write
314 *
315 * Write one configuration word from the device using MMA955xL command format.
316 * Commands to the MMA955xL platform consist of a write followed by one or
317 * more reads.
318 *
319 * Locking note: This function must be called with the device lock held.
320 * Locking is not handled inside the function. Callers should ensure they
321 * serialize access to the HW.
322 *
323 * Returns: 0 on success, negative value on failure.
324 */
mma9551_write_config_word(struct i2c_client * client,u8 app_id,u16 reg,u16 val)325 int mma9551_write_config_word(struct i2c_client *client, u8 app_id,
326 u16 reg, u16 val)
327 {
328 __be16 v = cpu_to_be16(val);
329
330 return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg,
331 (u8 *)&v, 2, NULL, 0);
332 }
333 EXPORT_SYMBOL_NS(mma9551_write_config_word, IIO_MMA9551);
334
335 /**
336 * mma9551_read_status_word() - read 1 status word
337 * @client: I2C client
338 * @app_id: Application ID
339 * @reg: Application register
340 * @val: Pointer to store value read
341 *
342 * Read one status word from the device using MMA955xL command format.
343 * Commands to the MMA955xL platform consist of a write followed by one or
344 * more reads.
345 *
346 * Locking note: This function must be called with the device lock held.
347 * Locking is not handled inside the function. Callers should ensure they
348 * serialize access to the HW.
349 *
350 * Returns: 0 on success, negative value on failure.
351 */
mma9551_read_status_word(struct i2c_client * client,u8 app_id,u16 reg,u16 * val)352 int mma9551_read_status_word(struct i2c_client *client, u8 app_id,
353 u16 reg, u16 *val)
354 {
355 int ret;
356 __be16 v;
357
358 ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
359 reg, NULL, 0, (u8 *)&v, 2);
360 if (ret < 0)
361 return ret;
362
363 *val = be16_to_cpu(v);
364
365 return 0;
366 }
367 EXPORT_SYMBOL_NS(mma9551_read_status_word, IIO_MMA9551);
368
369 /**
370 * mma9551_read_config_words() - read multiple config words
371 * @client: I2C client
372 * @app_id: Application ID
373 * @reg: Application register
374 * @len: Length of array to read (in words)
375 * @buf: Array of words to read
376 *
377 * Read multiple configuration registers (word-sized registers).
378 *
379 * Locking note: This function must be called with the device lock held.
380 * Locking is not handled inside the function. Callers should ensure they
381 * serialize access to the HW.
382 *
383 * Returns: 0 on success, negative value on failure.
384 */
mma9551_read_config_words(struct i2c_client * client,u8 app_id,u16 reg,u8 len,u16 * buf)385 int mma9551_read_config_words(struct i2c_client *client, u8 app_id,
386 u16 reg, u8 len, u16 *buf)
387 {
388 int ret, i;
389 __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
390
391 if (len > ARRAY_SIZE(be_buf)) {
392 dev_err(&client->dev, "Invalid buffer size %d\n", len);
393 return -EINVAL;
394 }
395
396 ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
397 reg, NULL, 0, (u8 *)be_buf, len * sizeof(u16));
398 if (ret < 0)
399 return ret;
400
401 for (i = 0; i < len; i++)
402 buf[i] = be16_to_cpu(be_buf[i]);
403
404 return 0;
405 }
406 EXPORT_SYMBOL_NS(mma9551_read_config_words, IIO_MMA9551);
407
408 /**
409 * mma9551_read_status_words() - read multiple status words
410 * @client: I2C client
411 * @app_id: Application ID
412 * @reg: Application register
413 * @len: Length of array to read (in words)
414 * @buf: Array of words to read
415 *
416 * Read multiple status registers (word-sized registers).
417 *
418 * Locking note: This function must be called with the device lock held.
419 * Locking is not handled inside the function. Callers should ensure they
420 * serialize access to the HW.
421 *
422 * Returns: 0 on success, negative value on failure.
423 */
mma9551_read_status_words(struct i2c_client * client,u8 app_id,u16 reg,u8 len,u16 * buf)424 int mma9551_read_status_words(struct i2c_client *client, u8 app_id,
425 u16 reg, u8 len, u16 *buf)
426 {
427 int ret, i;
428 __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
429
430 if (len > ARRAY_SIZE(be_buf)) {
431 dev_err(&client->dev, "Invalid buffer size %d\n", len);
432 return -EINVAL;
433 }
434
435 ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
436 reg, NULL, 0, (u8 *)be_buf, len * sizeof(u16));
437 if (ret < 0)
438 return ret;
439
440 for (i = 0; i < len; i++)
441 buf[i] = be16_to_cpu(be_buf[i]);
442
443 return 0;
444 }
445 EXPORT_SYMBOL_NS(mma9551_read_status_words, IIO_MMA9551);
446
447 /**
448 * mma9551_write_config_words() - write multiple config words
449 * @client: I2C client
450 * @app_id: Application ID
451 * @reg: Application register
452 * @len: Length of array to write (in words)
453 * @buf: Array of words to write
454 *
455 * Write multiple configuration registers (word-sized registers).
456 *
457 * Locking note: This function must be called with the device lock held.
458 * Locking is not handled inside the function. Callers should ensure they
459 * serialize access to the HW.
460 *
461 * Returns: 0 on success, negative value on failure.
462 */
mma9551_write_config_words(struct i2c_client * client,u8 app_id,u16 reg,u8 len,u16 * buf)463 int mma9551_write_config_words(struct i2c_client *client, u8 app_id,
464 u16 reg, u8 len, u16 *buf)
465 {
466 int i;
467 __be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2];
468
469 if (len > ARRAY_SIZE(be_buf)) {
470 dev_err(&client->dev, "Invalid buffer size %d\n", len);
471 return -EINVAL;
472 }
473
474 for (i = 0; i < len; i++)
475 be_buf[i] = cpu_to_be16(buf[i]);
476
477 return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG,
478 reg, (u8 *)be_buf, len * sizeof(u16), NULL, 0);
479 }
480 EXPORT_SYMBOL_NS(mma9551_write_config_words, IIO_MMA9551);
481
482 /**
483 * mma9551_update_config_bits() - update bits in register
484 * @client: I2C client
485 * @app_id: Application ID
486 * @reg: Application register
487 * @mask: Mask for the bits to update
488 * @val: Value of the bits to update
489 *
490 * Update bits in the given register using a bit mask.
491 *
492 * Locking note: This function must be called with the device lock held.
493 * Locking is not handled inside the function. Callers should ensure they
494 * serialize access to the HW.
495 *
496 * Returns: 0 on success, negative value on failure.
497 */
mma9551_update_config_bits(struct i2c_client * client,u8 app_id,u16 reg,u8 mask,u8 val)498 int mma9551_update_config_bits(struct i2c_client *client, u8 app_id,
499 u16 reg, u8 mask, u8 val)
500 {
501 int ret;
502 u8 tmp, orig;
503
504 ret = mma9551_read_config_byte(client, app_id, reg, &orig);
505 if (ret < 0)
506 return ret;
507
508 tmp = orig & ~mask;
509 tmp |= val & mask;
510
511 if (tmp == orig)
512 return 0;
513
514 return mma9551_write_config_byte(client, app_id, reg, tmp);
515 }
516 EXPORT_SYMBOL_NS(mma9551_update_config_bits, IIO_MMA9551);
517
518 /**
519 * mma9551_gpio_config() - configure gpio
520 * @client: I2C client
521 * @pin: GPIO pin to configure
522 * @app_id: Application ID
523 * @bitnum: Bit number of status register being assigned to the GPIO pin.
524 * @polarity: The polarity parameter is described in section 6.2.2, page 66,
525 * of the Software Reference Manual. Basically, polarity=0 means
526 * the interrupt line has the same value as the selected bit,
527 * while polarity=1 means the line is inverted.
528 *
529 * Assign a bit from an application’s status register to a specific GPIO pin.
530 *
531 * Locking note: This function must be called with the device lock held.
532 * Locking is not handled inside the function. Callers should ensure they
533 * serialize access to the HW.
534 *
535 * Returns: 0 on success, negative value on failure.
536 */
mma9551_gpio_config(struct i2c_client * client,enum mma9551_gpio_pin pin,u8 app_id,u8 bitnum,int polarity)537 int mma9551_gpio_config(struct i2c_client *client, enum mma9551_gpio_pin pin,
538 u8 app_id, u8 bitnum, int polarity)
539 {
540 u8 reg, pol_mask, pol_val;
541 int ret;
542
543 if (pin > mma9551_gpio_max) {
544 dev_err(&client->dev, "bad GPIO pin\n");
545 return -EINVAL;
546 }
547
548 /*
549 * Pin 6 is configured by regs 0x00 and 0x01, pin 7 by 0x02 and
550 * 0x03, and so on.
551 */
552 reg = pin * 2;
553
554 ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO,
555 reg, app_id);
556 if (ret < 0) {
557 dev_err(&client->dev, "error setting GPIO app_id\n");
558 return ret;
559 }
560
561 ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO,
562 reg + 1, bitnum);
563 if (ret < 0) {
564 dev_err(&client->dev, "error setting GPIO bit number\n");
565 return ret;
566 }
567
568 switch (pin) {
569 case mma9551_gpio6:
570 reg = MMA9551_GPIO_POL_LSB;
571 pol_mask = 1 << 6;
572 break;
573 case mma9551_gpio7:
574 reg = MMA9551_GPIO_POL_LSB;
575 pol_mask = 1 << 7;
576 break;
577 case mma9551_gpio8:
578 reg = MMA9551_GPIO_POL_MSB;
579 pol_mask = 1 << 0;
580 break;
581 case mma9551_gpio9:
582 reg = MMA9551_GPIO_POL_MSB;
583 pol_mask = 1 << 1;
584 break;
585 }
586 pol_val = polarity ? pol_mask : 0;
587
588 ret = mma9551_update_config_bits(client, MMA9551_APPID_GPIO, reg,
589 pol_mask, pol_val);
590 if (ret < 0)
591 dev_err(&client->dev, "error setting GPIO polarity\n");
592
593 return ret;
594 }
595 EXPORT_SYMBOL_NS(mma9551_gpio_config, IIO_MMA9551);
596
597 /**
598 * mma9551_read_version() - read device version information
599 * @client: I2C client
600 *
601 * Read version information and print device id and firmware version.
602 *
603 * Locking note: This function must be called with the device lock held.
604 * Locking is not handled inside the function. Callers should ensure they
605 * serialize access to the HW.
606 *
607 * Returns: 0 on success, negative value on failure.
608 */
mma9551_read_version(struct i2c_client * client)609 int mma9551_read_version(struct i2c_client *client)
610 {
611 struct mma9551_version_info info;
612 int ret;
613
614 ret = mma9551_transfer(client, MMA9551_APPID_VERSION, 0x00, 0x00,
615 NULL, 0, (u8 *)&info, sizeof(info));
616 if (ret < 0)
617 return ret;
618
619 dev_info(&client->dev, "device ID 0x%x, firmware version %02x.%02x\n",
620 be32_to_cpu(info.device_id), info.fw_version[0],
621 info.fw_version[1]);
622
623 return 0;
624 }
625 EXPORT_SYMBOL_NS(mma9551_read_version, IIO_MMA9551);
626
627 /**
628 * mma9551_set_device_state() - sets HW power mode
629 * @client: I2C client
630 * @enable: Use true to power on device, false to cause the device
631 * to enter sleep.
632 *
633 * Set power on/off for device using the Sleep/Wake Application.
634 * When enable is true, power on chip and enable doze mode.
635 * When enable is false, enter sleep mode (device remains in the
636 * lowest-power mode).
637 *
638 * Locking note: This function must be called with the device lock held.
639 * Locking is not handled inside the function. Callers should ensure they
640 * serialize access to the HW.
641 *
642 * Returns: 0 on success, negative value on failure.
643 */
mma9551_set_device_state(struct i2c_client * client,bool enable)644 int mma9551_set_device_state(struct i2c_client *client, bool enable)
645 {
646 return mma9551_update_config_bits(client, MMA9551_APPID_SLEEP_WAKE,
647 MMA9551_SLEEP_CFG,
648 MMA9551_SLEEP_CFG_SNCEN |
649 MMA9551_SLEEP_CFG_FLEEN |
650 MMA9551_SLEEP_CFG_SCHEN,
651 enable ? MMA9551_SLEEP_CFG_SCHEN |
652 MMA9551_SLEEP_CFG_FLEEN :
653 MMA9551_SLEEP_CFG_SNCEN);
654 }
655 EXPORT_SYMBOL_NS(mma9551_set_device_state, IIO_MMA9551);
656
657 /**
658 * mma9551_set_power_state() - sets runtime PM state
659 * @client: I2C client
660 * @on: Use true to power on device, false to power off
661 *
662 * Resume or suspend the device using Runtime PM.
663 * The device will suspend after the autosuspend delay.
664 *
665 * Returns: 0 on success, negative value on failure.
666 */
mma9551_set_power_state(struct i2c_client * client,bool on)667 int mma9551_set_power_state(struct i2c_client *client, bool on)
668 {
669 #ifdef CONFIG_PM
670 int ret;
671
672 if (on)
673 ret = pm_runtime_resume_and_get(&client->dev);
674 else {
675 pm_runtime_mark_last_busy(&client->dev);
676 ret = pm_runtime_put_autosuspend(&client->dev);
677 }
678
679 if (ret < 0) {
680 dev_err(&client->dev,
681 "failed to change power state to %d\n", on);
682
683 return ret;
684 }
685 #endif
686
687 return 0;
688 }
689 EXPORT_SYMBOL_NS(mma9551_set_power_state, IIO_MMA9551);
690
691 /**
692 * mma9551_sleep() - sleep
693 * @freq: Application frequency
694 *
695 * Firmware applications run at a certain frequency on the
696 * device. Sleep for one application cycle to make sure the
697 * application had time to run once and initialize set values.
698 */
mma9551_sleep(int freq)699 void mma9551_sleep(int freq)
700 {
701 int sleep_val = 1000 / freq;
702
703 if (sleep_val < 20)
704 usleep_range(sleep_val * 1000, 20000);
705 else
706 msleep_interruptible(sleep_val);
707 }
708 EXPORT_SYMBOL_NS(mma9551_sleep, IIO_MMA9551);
709
710 /**
711 * mma9551_read_accel_chan() - read accelerometer channel
712 * @client: I2C client
713 * @chan: IIO channel
714 * @val: Pointer to the accelerometer value read
715 * @val2: Unused
716 *
717 * Read accelerometer value for the specified channel.
718 *
719 * Locking note: This function must be called with the device lock held.
720 * Locking is not handled inside the function. Callers should ensure they
721 * serialize access to the HW.
722 *
723 * Returns: IIO_VAL_INT on success, negative value on failure.
724 */
mma9551_read_accel_chan(struct i2c_client * client,const struct iio_chan_spec * chan,int * val,int * val2)725 int mma9551_read_accel_chan(struct i2c_client *client,
726 const struct iio_chan_spec *chan,
727 int *val, int *val2)
728 {
729 u16 reg_addr;
730 s16 raw_accel;
731 int ret;
732
733 switch (chan->channel2) {
734 case IIO_MOD_X:
735 reg_addr = MMA9551_AFE_X_ACCEL_REG;
736 break;
737 case IIO_MOD_Y:
738 reg_addr = MMA9551_AFE_Y_ACCEL_REG;
739 break;
740 case IIO_MOD_Z:
741 reg_addr = MMA9551_AFE_Z_ACCEL_REG;
742 break;
743 default:
744 return -EINVAL;
745 }
746
747 ret = mma9551_set_power_state(client, true);
748 if (ret < 0)
749 return ret;
750
751 ret = mma9551_read_status_word(client, MMA9551_APPID_AFE,
752 reg_addr, &raw_accel);
753 if (ret < 0)
754 goto out_poweroff;
755
756 *val = raw_accel;
757
758 ret = IIO_VAL_INT;
759
760 out_poweroff:
761 mma9551_set_power_state(client, false);
762 return ret;
763 }
764 EXPORT_SYMBOL_NS(mma9551_read_accel_chan, IIO_MMA9551);
765
766 /**
767 * mma9551_read_accel_scale() - read accelerometer scale
768 * @val: Pointer to the accelerometer scale (int value)
769 * @val2: Pointer to the accelerometer scale (micro value)
770 *
771 * Read accelerometer scale.
772 *
773 * Returns: IIO_VAL_INT_PLUS_MICRO.
774 */
mma9551_read_accel_scale(int * val,int * val2)775 int mma9551_read_accel_scale(int *val, int *val2)
776 {
777 *val = 0;
778 *val2 = 2440;
779
780 return IIO_VAL_INT_PLUS_MICRO;
781 }
782 EXPORT_SYMBOL_NS(mma9551_read_accel_scale, IIO_MMA9551);
783
784 /**
785 * mma9551_app_reset() - reset application
786 * @client: I2C client
787 * @app_mask: Application to reset
788 *
789 * Reset the given application (using the Reset/Suspend/Clear
790 * Control Application)
791 *
792 * Returns: 0 on success, negative value on failure.
793 */
mma9551_app_reset(struct i2c_client * client,u32 app_mask)794 int mma9551_app_reset(struct i2c_client *client, u32 app_mask)
795 {
796 return mma9551_write_config_byte(client, MMA9551_APPID_RSC,
797 MMA9551_RSC_RESET +
798 MMA9551_RSC_OFFSET(app_mask),
799 MMA9551_RSC_VAL(app_mask));
800 }
801 EXPORT_SYMBOL_NS(mma9551_app_reset, IIO_MMA9551);
802
803 MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>");
804 MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
805 MODULE_LICENSE("GPL v2");
806 MODULE_DESCRIPTION("MMA955xL sensors core");
807