1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * IIO driver for the 3-axis accelerometer Domintech ARD10.
4 *
5 * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
6 * Copyright (c) 2012 Domintech Technology Co., Ltd
7 */
8
9 #include <linux/module.h>
10 #include <linux/i2c.h>
11 #include <linux/iio/iio.h>
12 #include <linux/iio/sysfs.h>
13 #include <linux/byteorder/generic.h>
14
15 #define DMARD10_REG_ACTR 0x00
16 #define DMARD10_REG_AFEM 0x0c
17 #define DMARD10_REG_STADR 0x12
18 #define DMARD10_REG_STAINT 0x1c
19 #define DMARD10_REG_MISC2 0x1f
20 #define DMARD10_REG_PD 0x21
21
22 #define DMARD10_MODE_OFF 0x00
23 #define DMARD10_MODE_STANDBY 0x02
24 #define DMARD10_MODE_ACTIVE 0x06
25 #define DMARD10_MODE_READ_OTP 0x12
26 #define DMARD10_MODE_RESET_DATA_PATH 0x82
27
28 /* AFEN set 1, ATM[2:0]=b'000 (normal), EN_Z/Y/X/T=1 */
29 #define DMARD10_VALUE_AFEM_AFEN_NORMAL 0x8f
30 /* ODR[3:0]=b'0111 (100Hz), CCK[3:0]=b'0100 (204.8kHZ) */
31 #define DMARD10_VALUE_CKSEL_ODR_100_204 0x74
32 /* INTC[6:5]=b'00 */
33 #define DMARD10_VALUE_INTC 0x00
34 /* TAP1/TAP2 Average 2 */
35 #define DMARD10_VALUE_TAPNS_AVE_2 0x11
36
37 #define DMARD10_VALUE_STADR 0x55
38 #define DMARD10_VALUE_STAINT 0xaa
39 #define DMARD10_VALUE_MISC2_OSCA_EN 0x08
40 #define DMARD10_VALUE_PD_RST 0x52
41
42 /* Offsets into the buffer read in dmard10_read_raw() */
43 #define DMARD10_X_OFFSET 1
44 #define DMARD10_Y_OFFSET 2
45 #define DMARD10_Z_OFFSET 3
46
47 /*
48 * a value of + or -128 corresponds to + or - 1G
49 * scale = 9.81 / 128 = 0.076640625
50 */
51
52 static const int dmard10_nscale = 76640625;
53
54 #define DMARD10_CHANNEL(reg, axis) { \
55 .type = IIO_ACCEL, \
56 .address = reg, \
57 .modified = 1, \
58 .channel2 = IIO_MOD_##axis, \
59 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
60 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
61 }
62
63 static const struct iio_chan_spec dmard10_channels[] = {
64 DMARD10_CHANNEL(DMARD10_X_OFFSET, X),
65 DMARD10_CHANNEL(DMARD10_Y_OFFSET, Y),
66 DMARD10_CHANNEL(DMARD10_Z_OFFSET, Z),
67 };
68
69 struct dmard10_data {
70 struct i2c_client *client;
71 };
72
73 /* Init sequence taken from the android driver */
dmard10_reset(struct i2c_client * client)74 static int dmard10_reset(struct i2c_client *client)
75 {
76 unsigned char buffer[7];
77 int ret;
78
79 /* 1. Powerdown reset */
80 ret = i2c_smbus_write_byte_data(client, DMARD10_REG_PD,
81 DMARD10_VALUE_PD_RST);
82 if (ret < 0)
83 return ret;
84
85 /*
86 * 2. ACTR => Standby mode => Download OTP to parameter reg =>
87 * Standby mode => Reset data path => Standby mode
88 */
89 buffer[0] = DMARD10_REG_ACTR;
90 buffer[1] = DMARD10_MODE_STANDBY;
91 buffer[2] = DMARD10_MODE_READ_OTP;
92 buffer[3] = DMARD10_MODE_STANDBY;
93 buffer[4] = DMARD10_MODE_RESET_DATA_PATH;
94 buffer[5] = DMARD10_MODE_STANDBY;
95 ret = i2c_master_send(client, buffer, 6);
96 if (ret < 0)
97 return ret;
98
99 /* 3. OSCA_EN = 1, TSTO = b'000 (INT1 = normal, TEST0 = normal) */
100 ret = i2c_smbus_write_byte_data(client, DMARD10_REG_MISC2,
101 DMARD10_VALUE_MISC2_OSCA_EN);
102 if (ret < 0)
103 return ret;
104
105 /* 4. AFEN = 1 (AFE will powerdown after ADC) */
106 buffer[0] = DMARD10_REG_AFEM;
107 buffer[1] = DMARD10_VALUE_AFEM_AFEN_NORMAL;
108 buffer[2] = DMARD10_VALUE_CKSEL_ODR_100_204;
109 buffer[3] = DMARD10_VALUE_INTC;
110 buffer[4] = DMARD10_VALUE_TAPNS_AVE_2;
111 buffer[5] = 0x00; /* DLYC, no delay timing */
112 buffer[6] = 0x07; /* INTD=1 push-pull, INTA=1 active high, AUTOT=1 */
113 ret = i2c_master_send(client, buffer, 7);
114 if (ret < 0)
115 return ret;
116
117 /* 5. Activation mode */
118 ret = i2c_smbus_write_byte_data(client, DMARD10_REG_ACTR,
119 DMARD10_MODE_ACTIVE);
120 if (ret < 0)
121 return ret;
122
123 return 0;
124 }
125
126 /* Shutdown sequence taken from the android driver */
dmard10_shutdown(struct i2c_client * client)127 static int dmard10_shutdown(struct i2c_client *client)
128 {
129 unsigned char buffer[3];
130
131 buffer[0] = DMARD10_REG_ACTR;
132 buffer[1] = DMARD10_MODE_STANDBY;
133 buffer[2] = DMARD10_MODE_OFF;
134
135 return i2c_master_send(client, buffer, 3);
136 }
137
dmard10_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)138 static int dmard10_read_raw(struct iio_dev *indio_dev,
139 struct iio_chan_spec const *chan,
140 int *val, int *val2, long mask)
141 {
142 struct dmard10_data *data = iio_priv(indio_dev);
143 __le16 buf[4];
144 int ret;
145
146 switch (mask) {
147 case IIO_CHAN_INFO_RAW:
148 /*
149 * Read 8 bytes starting at the REG_STADR register, trying to
150 * read the individual X, Y, Z registers will always read 0.
151 */
152 ret = i2c_smbus_read_i2c_block_data(data->client,
153 DMARD10_REG_STADR,
154 sizeof(buf), (u8 *)buf);
155 if (ret < 0)
156 return ret;
157 ret = le16_to_cpu(buf[chan->address]);
158 *val = sign_extend32(ret, 12);
159 return IIO_VAL_INT;
160 case IIO_CHAN_INFO_SCALE:
161 *val = 0;
162 *val2 = dmard10_nscale;
163 return IIO_VAL_INT_PLUS_NANO;
164 default:
165 return -EINVAL;
166 }
167 }
168
169 static const struct iio_info dmard10_info = {
170 .read_raw = dmard10_read_raw,
171 };
172
dmard10_shutdown_cleanup(void * client)173 static void dmard10_shutdown_cleanup(void *client)
174 {
175 dmard10_shutdown(client);
176 }
177
dmard10_probe(struct i2c_client * client)178 static int dmard10_probe(struct i2c_client *client)
179 {
180 int ret;
181 struct iio_dev *indio_dev;
182 struct dmard10_data *data;
183
184 /* These 2 registers have special POR reset values used for id */
185 ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STADR);
186 if (ret != DMARD10_VALUE_STADR)
187 return (ret < 0) ? ret : -ENODEV;
188
189 ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STAINT);
190 if (ret != DMARD10_VALUE_STAINT)
191 return (ret < 0) ? ret : -ENODEV;
192
193 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
194 if (!indio_dev) {
195 dev_err(&client->dev, "iio allocation failed!\n");
196 return -ENOMEM;
197 }
198
199 data = iio_priv(indio_dev);
200 data->client = client;
201
202 indio_dev->info = &dmard10_info;
203 indio_dev->name = "dmard10";
204 indio_dev->modes = INDIO_DIRECT_MODE;
205 indio_dev->channels = dmard10_channels;
206 indio_dev->num_channels = ARRAY_SIZE(dmard10_channels);
207
208 ret = dmard10_reset(client);
209 if (ret < 0)
210 return ret;
211
212 ret = devm_add_action_or_reset(&client->dev, dmard10_shutdown_cleanup,
213 client);
214 if (ret)
215 return ret;
216
217 return devm_iio_device_register(&client->dev, indio_dev);
218 }
219
dmard10_suspend(struct device * dev)220 static int dmard10_suspend(struct device *dev)
221 {
222 return dmard10_shutdown(to_i2c_client(dev));
223 }
224
dmard10_resume(struct device * dev)225 static int dmard10_resume(struct device *dev)
226 {
227 return dmard10_reset(to_i2c_client(dev));
228 }
229
230 static DEFINE_SIMPLE_DEV_PM_OPS(dmard10_pm_ops, dmard10_suspend,
231 dmard10_resume);
232
233 static const struct i2c_device_id dmard10_i2c_id[] = {
234 { "dmard10" },
235 {}
236 };
237 MODULE_DEVICE_TABLE(i2c, dmard10_i2c_id);
238
239 static struct i2c_driver dmard10_driver = {
240 .driver = {
241 .name = "dmard10",
242 .pm = pm_sleep_ptr(&dmard10_pm_ops),
243 },
244 .probe = dmard10_probe,
245 .id_table = dmard10_i2c_id,
246 };
247
248 module_i2c_driver(dmard10_driver);
249
250 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
251 MODULE_DESCRIPTION("Domintech ARD10 3-Axis Accelerometer driver");
252 MODULE_LICENSE("GPL v2");
253