1 /* 2 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and 3 Philip Edelbrock <phil@netroedge.com> 4 5 This program is free software; you can redistribute it and/or modify 6 it under the terms of the GNU General Public License as published by 7 the Free Software Foundation; either version 2 of the License, or 8 (at your option) any later version. 9 10 This program is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 GNU General Public License for more details. 14 15 You should have received a copy of the GNU General Public License 16 along with this program; if not, write to the Free Software 17 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 */ 19 20 /* 21 Supports: 22 Intel PIIX4, 440MX 23 Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 24 ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 25 AMD Hudson-2 26 SMSC Victory66 27 28 Note: we assume there can only be one device, with one or more 29 SMBus interfaces. 30 */ 31 32 #include <linux/module.h> 33 #include <linux/moduleparam.h> 34 #include <linux/pci.h> 35 #include <linux/kernel.h> 36 #include <linux/delay.h> 37 #include <linux/stddef.h> 38 #include <linux/ioport.h> 39 #include <linux/i2c.h> 40 #include <linux/init.h> 41 #include <linux/dmi.h> 42 #include <linux/acpi.h> 43 #include <linux/io.h> 44 45 46 /* PIIX4 SMBus address offsets */ 47 #define SMBHSTSTS (0 + piix4_smba) 48 #define SMBHSLVSTS (1 + piix4_smba) 49 #define SMBHSTCNT (2 + piix4_smba) 50 #define SMBHSTCMD (3 + piix4_smba) 51 #define SMBHSTADD (4 + piix4_smba) 52 #define SMBHSTDAT0 (5 + piix4_smba) 53 #define SMBHSTDAT1 (6 + piix4_smba) 54 #define SMBBLKDAT (7 + piix4_smba) 55 #define SMBSLVCNT (8 + piix4_smba) 56 #define SMBSHDWCMD (9 + piix4_smba) 57 #define SMBSLVEVT (0xA + piix4_smba) 58 #define SMBSLVDAT (0xC + piix4_smba) 59 60 /* count for request_region */ 61 #define SMBIOSIZE 8 62 63 /* PCI Address Constants */ 64 #define SMBBA 0x090 65 #define SMBHSTCFG 0x0D2 66 #define SMBSLVC 0x0D3 67 #define SMBSHDW1 0x0D4 68 #define SMBSHDW2 0x0D5 69 #define SMBREV 0x0D6 70 71 /* Other settings */ 72 #define MAX_TIMEOUT 500 73 #define ENABLE_INT9 0 74 75 /* PIIX4 constants */ 76 #define PIIX4_QUICK 0x00 77 #define PIIX4_BYTE 0x04 78 #define PIIX4_BYTE_DATA 0x08 79 #define PIIX4_WORD_DATA 0x0C 80 #define PIIX4_BLOCK_DATA 0x14 81 82 /* insmod parameters */ 83 84 /* If force is set to anything different from 0, we forcibly enable the 85 PIIX4. DANGEROUS! */ 86 static int force; 87 module_param (force, int, 0); 88 MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); 89 90 /* If force_addr is set to anything different from 0, we forcibly enable 91 the PIIX4 at the given address. VERY DANGEROUS! */ 92 static int force_addr; 93 module_param (force_addr, int, 0); 94 MODULE_PARM_DESC(force_addr, 95 "Forcibly enable the PIIX4 at the given address. " 96 "EXTREMELY DANGEROUS!"); 97 98 static int srvrworks_csb5_delay; 99 static struct pci_driver piix4_driver; 100 101 static struct dmi_system_id __devinitdata piix4_dmi_blacklist[] = { 102 { 103 .ident = "Sapphire AM2RD790", 104 .matches = { 105 DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."), 106 DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"), 107 }, 108 }, 109 { 110 .ident = "DFI Lanparty UT 790FX", 111 .matches = { 112 DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."), 113 DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"), 114 }, 115 }, 116 { } 117 }; 118 119 /* The IBM entry is in a separate table because we only check it 120 on Intel-based systems */ 121 static struct dmi_system_id __devinitdata piix4_dmi_ibm[] = { 122 { 123 .ident = "IBM", 124 .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, 125 }, 126 { }, 127 }; 128 129 struct i2c_piix4_adapdata { 130 unsigned short smba; 131 }; 132 133 static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, 134 const struct pci_device_id *id) 135 { 136 unsigned char temp; 137 unsigned short piix4_smba; 138 139 if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && 140 (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) 141 srvrworks_csb5_delay = 1; 142 143 /* On some motherboards, it was reported that accessing the SMBus 144 caused severe hardware problems */ 145 if (dmi_check_system(piix4_dmi_blacklist)) { 146 dev_err(&PIIX4_dev->dev, 147 "Accessing the SMBus on this system is unsafe!\n"); 148 return -EPERM; 149 } 150 151 /* Don't access SMBus on IBM systems which get corrupted eeproms */ 152 if (dmi_check_system(piix4_dmi_ibm) && 153 PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { 154 dev_err(&PIIX4_dev->dev, "IBM system detected; this module " 155 "may corrupt your serial eeprom! Refusing to load " 156 "module!\n"); 157 return -EPERM; 158 } 159 160 /* Determine the address of the SMBus areas */ 161 if (force_addr) { 162 piix4_smba = force_addr & 0xfff0; 163 force = 0; 164 } else { 165 pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); 166 piix4_smba &= 0xfff0; 167 if(piix4_smba == 0) { 168 dev_err(&PIIX4_dev->dev, "SMBus base address " 169 "uninitialized - upgrade BIOS or use " 170 "force_addr=0xaddr\n"); 171 return -ENODEV; 172 } 173 } 174 175 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) 176 return -ENODEV; 177 178 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { 179 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", 180 piix4_smba); 181 return -EBUSY; 182 } 183 184 pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); 185 186 /* If force_addr is set, we program the new address here. Just to make 187 sure, we disable the PIIX4 first. */ 188 if (force_addr) { 189 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); 190 pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); 191 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); 192 dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " 193 "new address %04x!\n", piix4_smba); 194 } else if ((temp & 1) == 0) { 195 if (force) { 196 /* This should never need to be done, but has been 197 * noted that many Dell machines have the SMBus 198 * interface on the PIIX4 disabled!? NOTE: This assumes 199 * I/O space and other allocations WERE done by the 200 * Bios! Don't complain if your hardware does weird 201 * things after enabling this. :') Check for Bios 202 * updates before resorting to this. 203 */ 204 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, 205 temp | 1); 206 dev_printk(KERN_NOTICE, &PIIX4_dev->dev, 207 "WARNING: SMBus interface has been " 208 "FORCEFULLY ENABLED!\n"); 209 } else { 210 dev_err(&PIIX4_dev->dev, 211 "Host SMBus controller not enabled!\n"); 212 release_region(piix4_smba, SMBIOSIZE); 213 return -ENODEV; 214 } 215 } 216 217 if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2)) 218 dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n"); 219 else if ((temp & 0x0E) == 0) 220 dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n"); 221 else 222 dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " 223 "(or code out of date)!\n"); 224 225 pci_read_config_byte(PIIX4_dev, SMBREV, &temp); 226 dev_info(&PIIX4_dev->dev, 227 "SMBus Host Controller at 0x%x, revision %d\n", 228 piix4_smba, temp); 229 230 return piix4_smba; 231 } 232 233 static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, 234 const struct pci_device_id *id) 235 { 236 unsigned short piix4_smba; 237 unsigned short smba_idx = 0xcd6; 238 u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; 239 240 /* SB800 and later SMBus does not support forcing address */ 241 if (force || force_addr) { 242 dev_err(&PIIX4_dev->dev, "SMBus does not support " 243 "forcing address!\n"); 244 return -EINVAL; 245 } 246 247 /* Determine the address of the SMBus areas */ 248 if (!request_region(smba_idx, 2, "smba_idx")) { 249 dev_err(&PIIX4_dev->dev, "SMBus base address index region " 250 "0x%x already in use!\n", smba_idx); 251 return -EBUSY; 252 } 253 outb_p(smb_en, smba_idx); 254 smba_en_lo = inb_p(smba_idx + 1); 255 outb_p(smb_en + 1, smba_idx); 256 smba_en_hi = inb_p(smba_idx + 1); 257 release_region(smba_idx, 2); 258 259 if ((smba_en_lo & 1) == 0) { 260 dev_err(&PIIX4_dev->dev, 261 "Host SMBus controller not enabled!\n"); 262 return -ENODEV; 263 } 264 265 piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; 266 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) 267 return -ENODEV; 268 269 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { 270 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", 271 piix4_smba); 272 return -EBUSY; 273 } 274 275 /* Request the SMBus I2C bus config region */ 276 if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { 277 dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " 278 "0x%x already in use!\n", piix4_smba + i2ccfg_offset); 279 release_region(piix4_smba, SMBIOSIZE); 280 return -EBUSY; 281 } 282 i2ccfg = inb_p(piix4_smba + i2ccfg_offset); 283 release_region(piix4_smba + i2ccfg_offset, 1); 284 285 if (i2ccfg & 1) 286 dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n"); 287 else 288 dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n"); 289 290 dev_info(&PIIX4_dev->dev, 291 "SMBus Host Controller at 0x%x, revision %d\n", 292 piix4_smba, i2ccfg >> 4); 293 294 return piix4_smba; 295 } 296 297 static int __devinit piix4_setup_aux(struct pci_dev *PIIX4_dev, 298 const struct pci_device_id *id, 299 unsigned short base_reg_addr) 300 { 301 /* Set up auxiliary SMBus controllers found on some 302 * AMD chipsets e.g. SP5100 (SB700 derivative) */ 303 304 unsigned short piix4_smba; 305 306 /* Read address of auxiliary SMBus controller */ 307 pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba); 308 if ((piix4_smba & 1) == 0) { 309 dev_dbg(&PIIX4_dev->dev, 310 "Auxiliary SMBus controller not enabled\n"); 311 return -ENODEV; 312 } 313 314 piix4_smba &= 0xfff0; 315 if (piix4_smba == 0) { 316 dev_dbg(&PIIX4_dev->dev, 317 "Auxiliary SMBus base address uninitialized\n"); 318 return -ENODEV; 319 } 320 321 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) 322 return -ENODEV; 323 324 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { 325 dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x " 326 "already in use!\n", piix4_smba); 327 return -EBUSY; 328 } 329 330 dev_info(&PIIX4_dev->dev, 331 "Auxiliary SMBus Host Controller at 0x%x\n", 332 piix4_smba); 333 334 return piix4_smba; 335 } 336 337 static int piix4_transaction(struct i2c_adapter *piix4_adapter) 338 { 339 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter); 340 unsigned short piix4_smba = adapdata->smba; 341 int temp; 342 int result = 0; 343 int timeout = 0; 344 345 dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " 346 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), 347 inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 348 inb_p(SMBHSTDAT1)); 349 350 /* Make sure the SMBus host is ready to start transmitting */ 351 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { 352 dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). " 353 "Resetting...\n", temp); 354 outb_p(temp, SMBHSTSTS); 355 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { 356 dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp); 357 return -EBUSY; 358 } else { 359 dev_dbg(&piix4_adapter->dev, "Successful!\n"); 360 } 361 } 362 363 /* start the transaction by setting bit 6 */ 364 outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); 365 366 /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ 367 if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */ 368 msleep(2); 369 else 370 msleep(1); 371 372 while ((++timeout < MAX_TIMEOUT) && 373 ((temp = inb_p(SMBHSTSTS)) & 0x01)) 374 msleep(1); 375 376 /* If the SMBus is still busy, we give up */ 377 if (timeout == MAX_TIMEOUT) { 378 dev_err(&piix4_adapter->dev, "SMBus Timeout!\n"); 379 result = -ETIMEDOUT; 380 } 381 382 if (temp & 0x10) { 383 result = -EIO; 384 dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n"); 385 } 386 387 if (temp & 0x08) { 388 result = -EIO; 389 dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be " 390 "locked until next hard reset. (sorry!)\n"); 391 /* Clock stops and slave is stuck in mid-transmission */ 392 } 393 394 if (temp & 0x04) { 395 result = -ENXIO; 396 dev_dbg(&piix4_adapter->dev, "Error: no response!\n"); 397 } 398 399 if (inb_p(SMBHSTSTS) != 0x00) 400 outb_p(inb(SMBHSTSTS), SMBHSTSTS); 401 402 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { 403 dev_err(&piix4_adapter->dev, "Failed reset at end of " 404 "transaction (%02x)\n", temp); 405 } 406 dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, " 407 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), 408 inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 409 inb_p(SMBHSTDAT1)); 410 return result; 411 } 412 413 /* Return negative errno on error. */ 414 static s32 piix4_access(struct i2c_adapter * adap, u16 addr, 415 unsigned short flags, char read_write, 416 u8 command, int size, union i2c_smbus_data * data) 417 { 418 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); 419 unsigned short piix4_smba = adapdata->smba; 420 int i, len; 421 int status; 422 423 switch (size) { 424 case I2C_SMBUS_QUICK: 425 outb_p((addr << 1) | read_write, 426 SMBHSTADD); 427 size = PIIX4_QUICK; 428 break; 429 case I2C_SMBUS_BYTE: 430 outb_p((addr << 1) | read_write, 431 SMBHSTADD); 432 if (read_write == I2C_SMBUS_WRITE) 433 outb_p(command, SMBHSTCMD); 434 size = PIIX4_BYTE; 435 break; 436 case I2C_SMBUS_BYTE_DATA: 437 outb_p((addr << 1) | read_write, 438 SMBHSTADD); 439 outb_p(command, SMBHSTCMD); 440 if (read_write == I2C_SMBUS_WRITE) 441 outb_p(data->byte, SMBHSTDAT0); 442 size = PIIX4_BYTE_DATA; 443 break; 444 case I2C_SMBUS_WORD_DATA: 445 outb_p((addr << 1) | read_write, 446 SMBHSTADD); 447 outb_p(command, SMBHSTCMD); 448 if (read_write == I2C_SMBUS_WRITE) { 449 outb_p(data->word & 0xff, SMBHSTDAT0); 450 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); 451 } 452 size = PIIX4_WORD_DATA; 453 break; 454 case I2C_SMBUS_BLOCK_DATA: 455 outb_p((addr << 1) | read_write, 456 SMBHSTADD); 457 outb_p(command, SMBHSTCMD); 458 if (read_write == I2C_SMBUS_WRITE) { 459 len = data->block[0]; 460 if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) 461 return -EINVAL; 462 outb_p(len, SMBHSTDAT0); 463 i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ 464 for (i = 1; i <= len; i++) 465 outb_p(data->block[i], SMBBLKDAT); 466 } 467 size = PIIX4_BLOCK_DATA; 468 break; 469 default: 470 dev_warn(&adap->dev, "Unsupported transaction %d\n", size); 471 return -EOPNOTSUPP; 472 } 473 474 outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); 475 476 status = piix4_transaction(adap); 477 if (status) 478 return status; 479 480 if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) 481 return 0; 482 483 484 switch (size) { 485 case PIIX4_BYTE: 486 case PIIX4_BYTE_DATA: 487 data->byte = inb_p(SMBHSTDAT0); 488 break; 489 case PIIX4_WORD_DATA: 490 data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); 491 break; 492 case PIIX4_BLOCK_DATA: 493 data->block[0] = inb_p(SMBHSTDAT0); 494 if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) 495 return -EPROTO; 496 i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ 497 for (i = 1; i <= data->block[0]; i++) 498 data->block[i] = inb_p(SMBBLKDAT); 499 break; 500 } 501 return 0; 502 } 503 504 static u32 piix4_func(struct i2c_adapter *adapter) 505 { 506 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 507 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 508 I2C_FUNC_SMBUS_BLOCK_DATA; 509 } 510 511 static const struct i2c_algorithm smbus_algorithm = { 512 .smbus_xfer = piix4_access, 513 .functionality = piix4_func, 514 }; 515 516 static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = { 517 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, 518 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, 519 { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) }, 520 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) }, 521 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, 522 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, 523 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, 524 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, 525 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 526 PCI_DEVICE_ID_SERVERWORKS_OSB4) }, 527 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 528 PCI_DEVICE_ID_SERVERWORKS_CSB5) }, 529 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 530 PCI_DEVICE_ID_SERVERWORKS_CSB6) }, 531 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 532 PCI_DEVICE_ID_SERVERWORKS_HT1000SB) }, 533 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 534 PCI_DEVICE_ID_SERVERWORKS_HT1100LD) }, 535 { 0, } 536 }; 537 538 MODULE_DEVICE_TABLE (pci, piix4_ids); 539 540 static struct i2c_adapter *piix4_main_adapter; 541 static struct i2c_adapter *piix4_aux_adapter; 542 543 static int __devinit piix4_add_adapter(struct pci_dev *dev, 544 unsigned short smba, 545 struct i2c_adapter **padap) 546 { 547 struct i2c_adapter *adap; 548 struct i2c_piix4_adapdata *adapdata; 549 int retval; 550 551 adap = kzalloc(sizeof(*adap), GFP_KERNEL); 552 if (adap == NULL) { 553 release_region(smba, SMBIOSIZE); 554 return -ENOMEM; 555 } 556 557 adap->owner = THIS_MODULE; 558 adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 559 adap->algo = &smbus_algorithm; 560 561 adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); 562 if (adapdata == NULL) { 563 kfree(adap); 564 release_region(smba, SMBIOSIZE); 565 return -ENOMEM; 566 } 567 568 adapdata->smba = smba; 569 570 /* set up the sysfs linkage to our parent device */ 571 adap->dev.parent = &dev->dev; 572 573 snprintf(adap->name, sizeof(adap->name), 574 "SMBus PIIX4 adapter at %04x", smba); 575 576 i2c_set_adapdata(adap, adapdata); 577 578 retval = i2c_add_adapter(adap); 579 if (retval) { 580 dev_err(&dev->dev, "Couldn't register adapter!\n"); 581 kfree(adapdata); 582 kfree(adap); 583 release_region(smba, SMBIOSIZE); 584 return retval; 585 } 586 587 *padap = adap; 588 return 0; 589 } 590 591 static int __devinit piix4_probe(struct pci_dev *dev, 592 const struct pci_device_id *id) 593 { 594 int retval; 595 596 if ((dev->vendor == PCI_VENDOR_ID_ATI && 597 dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && 598 dev->revision >= 0x40) || 599 dev->vendor == PCI_VENDOR_ID_AMD) 600 /* base address location etc changed in SB800 */ 601 retval = piix4_setup_sb800(dev, id); 602 else 603 retval = piix4_setup(dev, id); 604 605 /* If no main SMBus found, give up */ 606 if (retval < 0) 607 return retval; 608 609 /* Try to register main SMBus adapter, give up if we can't */ 610 retval = piix4_add_adapter(dev, retval, &piix4_main_adapter); 611 if (retval < 0) 612 return retval; 613 614 /* Check for auxiliary SMBus on some AMD chipsets */ 615 if (dev->vendor == PCI_VENDOR_ID_ATI && 616 dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && 617 dev->revision < 0x40) { 618 retval = piix4_setup_aux(dev, id, 0x58); 619 if (retval > 0) { 620 /* Try to add the aux adapter if it exists, 621 * piix4_add_adapter will clean up if this fails */ 622 piix4_add_adapter(dev, retval, &piix4_aux_adapter); 623 } 624 } 625 626 return 0; 627 } 628 629 static void __devexit piix4_adap_remove(struct i2c_adapter *adap) 630 { 631 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); 632 633 if (adapdata->smba) { 634 i2c_del_adapter(adap); 635 release_region(adapdata->smba, SMBIOSIZE); 636 kfree(adapdata); 637 kfree(adap); 638 } 639 } 640 641 static void __devexit piix4_remove(struct pci_dev *dev) 642 { 643 if (piix4_main_adapter) { 644 piix4_adap_remove(piix4_main_adapter); 645 piix4_main_adapter = NULL; 646 } 647 648 if (piix4_aux_adapter) { 649 piix4_adap_remove(piix4_aux_adapter); 650 piix4_aux_adapter = NULL; 651 } 652 } 653 654 static struct pci_driver piix4_driver = { 655 .name = "piix4_smbus", 656 .id_table = piix4_ids, 657 .probe = piix4_probe, 658 .remove = __devexit_p(piix4_remove), 659 }; 660 661 module_pci_driver(piix4_driver); 662 663 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " 664 "Philip Edelbrock <phil@netroedge.com>"); 665 MODULE_DESCRIPTION("PIIX4 SMBus driver"); 666 MODULE_LICENSE("GPL"); 667