Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that

Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that we can
do the sync with the kernel sources.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
"I2C core:

- finally remove the I2C_COMPAT symbol after 15 years of d

Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
"I2C core:

- finally remove the I2C_COMPAT symbol after 15 years of deprecation

- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation

- use scoped foreach OF child loops

- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts

I2C host drivers:

- DesignWare and Renesas I2C driver updates.

The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.

- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards

Cleanups:

- improve the exit path in the runtime resume function for the
Qualcomm Geni platform

- get rid of the unused "target_addr" parameter in the Intel LJCA
driver

- intialize the restart_flag in the MediaTek controller in one single
place

- constify a few global data structures in the virtio driver

- simplify the bus speed handling in the Renesas driver init function
making it more readable

- improved probe function of the Renesas R-Car driver

- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()

- iMX/MXC driver cleanups

- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers

Refactoring:

- Fix a potential out of boundary array access in the Nuvoton driver.

This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.

Improvements:

- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver

- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature

- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout

New Feature:

- support fast mode plus in the Renesas I2C (riic) driver

New support:

- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.

- new i2c-keba.c driver

- new driver for The Mule i2c multiplexer

Core I2C framework:

- move runtime PM functions in order to allow them to be accessed
during device add

Devicetree:

- nVidia and Qualcomm binding improvements

- get rid of redundant "multi-master" property in the aspeed binding

- convert i2c-sprd binding to YAML

AT24 updates:

- document a new model from giantec in DT bindings"

* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...

show more ...

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in t

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.

The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.

Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.

Follows the list of the rest of the changes grouped by type of
change.

Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.

The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.

The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.

Constified a few global data structures in the virtio driver.

The Renesas driver simplifies the bus speed handling in the init
function making it more readable.

Improved an if/else statement in probe function of the Renesas
R-Car driver.

The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().

Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.

Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.

Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.

Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.

The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.

In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.

New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.

New support
-----------
Added support for:

- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.

The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.

Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.

Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.

The i2c-sprd binding has been converted to YAML.

show more ...

i2c: don't use ',' after delimiters

Delimiters are meant to be last, no need for a ',' there. Remove a
superfluous newline in the ali1535 driver while here.

Signed-off-by: Wolfram Sang <wsa+renesas

i2c: don't use ',' after delimiters

Delimiters are meant to be last, no need for a ',' there. Remove a
superfluous newline in the ali1535 driver while here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

show more ...

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:
"The I2C core has two header documentation updates as t

Merge tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:
"The I2C core has two header documentation updates as the dependecies
are in now.

The I2C host drivers add some patches which nearly fell through the
cracks:

- Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).

- Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS. The latest
change also includes file sorting.

- Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum of
8 slots to be used. This ensures that the Intel PIIX4 device can
register the SPDs correctly without failure, even if other slots
are populated but not used"

* tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: header: improve kdoc for i2c_algorithm
i2c: header: remove unneeded stuff regarding i2c_algorithm
i2c: piix4: Register SPDs
i2c: smbus: remove i801 assumptions from SPD probing
i2c: mux: gpio: Add support for the 'settle-time-us' property
i2c: mux: gpio: Re-order #include to match alphabetic order
dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property
dt-bindings: i2c: qcom-cci: Document sm8650 compatible
dt-bindings: i2c: qcom-cci: Document sm8550 compatible

show more ...

Merge tag 'i2c-host-6.11-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Co

Merge tag 'i2c-host-6.11-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).

Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS.

The latest change also includes file sorting.

Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum
of 8 slots to be used. This ensures that the Intel PIIX4 device
can register the SPDs correctly without failure, even if other
slots are populated but not used.

show more ...

i2c: piix4: Register SPDs

The piix4 I2C bus can carry SPDs, register them if present.
Only look on bus 0, as this is where the SPDs seem to be located.

Only the first 8 slots are supported. If the

i2c: piix4: Register SPDs

The piix4 I2C bus can carry SPDs, register them if present.
Only look on bus 0, as this is where the SPDs seem to be located.

Only the first 8 slots are supported. If the system has more,
then these will not be visible.

The AUX bus can not be probed as on some platforms it reports all
devices present and all reads return "0".
This would allow the ee1004 to be probed incorrectly.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

show more ...

Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"The I2C core gains documentation updates for the testunit, a cleanup

Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"The I2C core gains documentation updates for the testunit, a cleanup
regarding unneeded 'driver_data' and more sanity checks in the char
device.

For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.

New Support:

- Added support for Intel Arrow Lake-H
- Added I2C support in the Arioha SoC by linking the Mediatek I2C
controller

Cleanups:

- Added the MODULE_DESCRIPTION() macro, resolving a modpost warning
in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by removing
unnecessary semicolons after brackets.

General improvements:

- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during suspend()
before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for spurious
interrupts.

DTS Changes:

- Removed address-cell and size-cell from the Atmel at91sam, nVidia
Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with the
i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.

AT24 EEPROM driver changes:

- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)"

* tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (87 commits)
i2c: document new callbacks in i2c_algorithm
dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
dt-bindings: i2c: at91: Add sama7d65 compatible string
i2c: st: reword according to newest specification
i2c: cpm: reword according to newest specification
i2c: virtio: reword according to newest specification
i2c: nvidia-gpu: reword according to newest specification
i2c: viai2c: reword according to newest specification
i2c: viperboard: reword according to newest specification
i2c: uniphier: reword according to newest specification
i2c: uniphier-f: reword according to newest specification
i2c: tiny-usb: reword according to newest specification
i2c: thunderx-pcidrv: reword according to newest specification
i2c: tegra-bpmp: reword according to newest specification
i2c: taos-evm: reword according to newest specification
i2c: sun6i-p2wi: reword according to newest specification
i2c: stm32f4: reword according to newest specification
i2c: sprd: reword according to newest specification
i2c: sis5595: reword according to newest specification
i2c: rzv2m: reword according to newest specification
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'i2c-host-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This release includes significant updates, with the primary
change being the rena

Merge tag 'i2c-host-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This release includes significant updates, with the primary
change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.

New Support:

- Added support for Intel Arrow Lake-H.
- Added I2C support in the Arioha SoC by linking the Mediatek
I2C controller.

Cleanups:

- Added the MODULE_DESCRIPTION() macro, resolving a modpost
warning in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by
removing unnecessary semicolons after brackets.

General improvements:

- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during
suspend() before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for
spurious interrupts.

DTS Changes:

- Removed address-cell and size-cell from the Atmel at91sam,
nVidia Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with
the i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string
thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.

show more ...

i2c: piix4: reword according to newest specification

Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.

Si

i2c: piix4: reword according to newest specification

Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

show more ...