1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * DRM driver for Ilitek ILI9225 panels 4 * 5 * Copyright 2017 David Lechner <david@lechnology.com> 6 * 7 * Some code copied from mipi-dbi.c 8 * Copyright 2016 Noralf Trønnes 9 */ 10 11 #include <linux/delay.h> 12 #include <linux/dma-buf.h> 13 #include <linux/gpio/consumer.h> 14 #include <linux/module.h> 15 #include <linux/property.h> 16 #include <linux/spi/spi.h> 17 #include <video/mipi_display.h> 18 19 #include <drm/drm_atomic_helper.h> 20 #include <drm/drm_damage_helper.h> 21 #include <drm/drm_drv.h> 22 #include <drm/drm_fb_dma_helper.h> 23 #include <drm/drm_fbdev_generic.h> 24 #include <drm/drm_fourcc.h> 25 #include <drm/drm_framebuffer.h> 26 #include <drm/drm_gem_atomic_helper.h> 27 #include <drm/drm_gem_dma_helper.h> 28 #include <drm/drm_gem_framebuffer_helper.h> 29 #include <drm/drm_managed.h> 30 #include <drm/drm_mipi_dbi.h> 31 #include <drm/drm_rect.h> 32 33 #define ILI9225_DRIVER_READ_CODE 0x00 34 #define ILI9225_DRIVER_OUTPUT_CONTROL 0x01 35 #define ILI9225_LCD_AC_DRIVING_CONTROL 0x02 36 #define ILI9225_ENTRY_MODE 0x03 37 #define ILI9225_DISPLAY_CONTROL_1 0x07 38 #define ILI9225_BLANK_PERIOD_CONTROL_1 0x08 39 #define ILI9225_FRAME_CYCLE_CONTROL 0x0b 40 #define ILI9225_INTERFACE_CONTROL 0x0c 41 #define ILI9225_OSCILLATION_CONTROL 0x0f 42 #define ILI9225_POWER_CONTROL_1 0x10 43 #define ILI9225_POWER_CONTROL_2 0x11 44 #define ILI9225_POWER_CONTROL_3 0x12 45 #define ILI9225_POWER_CONTROL_4 0x13 46 #define ILI9225_POWER_CONTROL_5 0x14 47 #define ILI9225_VCI_RECYCLING 0x15 48 #define ILI9225_RAM_ADDRESS_SET_1 0x20 49 #define ILI9225_RAM_ADDRESS_SET_2 0x21 50 #define ILI9225_WRITE_DATA_TO_GRAM 0x22 51 #define ILI9225_SOFTWARE_RESET 0x28 52 #define ILI9225_GATE_SCAN_CONTROL 0x30 53 #define ILI9225_VERTICAL_SCROLL_1 0x31 54 #define ILI9225_VERTICAL_SCROLL_2 0x32 55 #define ILI9225_VERTICAL_SCROLL_3 0x33 56 #define ILI9225_PARTIAL_DRIVING_POS_1 0x34 57 #define ILI9225_PARTIAL_DRIVING_POS_2 0x35 58 #define ILI9225_HORIZ_WINDOW_ADDR_1 0x36 59 #define ILI9225_HORIZ_WINDOW_ADDR_2 0x37 60 #define ILI9225_VERT_WINDOW_ADDR_1 0x38 61 #define ILI9225_VERT_WINDOW_ADDR_2 0x39 62 #define ILI9225_GAMMA_CONTROL_1 0x50 63 #define ILI9225_GAMMA_CONTROL_2 0x51 64 #define ILI9225_GAMMA_CONTROL_3 0x52 65 #define ILI9225_GAMMA_CONTROL_4 0x53 66 #define ILI9225_GAMMA_CONTROL_5 0x54 67 #define ILI9225_GAMMA_CONTROL_6 0x55 68 #define ILI9225_GAMMA_CONTROL_7 0x56 69 #define ILI9225_GAMMA_CONTROL_8 0x57 70 #define ILI9225_GAMMA_CONTROL_9 0x58 71 #define ILI9225_GAMMA_CONTROL_10 0x59 72 73 static inline int ili9225_command(struct mipi_dbi *dbi, u8 cmd, u16 data) 74 { 75 u8 par[2] = { data >> 8, data & 0xff }; 76 77 return mipi_dbi_command_buf(dbi, cmd, par, 2); 78 } 79 80 static void ili9225_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb, 81 struct drm_rect *rect) 82 { 83 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev); 84 unsigned int height = rect->y2 - rect->y1; 85 unsigned int width = rect->x2 - rect->x1; 86 struct mipi_dbi *dbi = &dbidev->dbi; 87 bool swap = dbi->swap_bytes; 88 u16 x_start, y_start; 89 u16 x1, x2, y1, y2; 90 int ret = 0; 91 bool full; 92 void *tr; 93 94 full = width == fb->width && height == fb->height; 95 96 DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect)); 97 98 if (!dbi->dc || !full || swap || 99 fb->format->format == DRM_FORMAT_XRGB8888) { 100 tr = dbidev->tx_buf; 101 ret = mipi_dbi_buf_copy(tr, src, fb, rect, swap); 102 if (ret) 103 goto err_msg; 104 } else { 105 tr = src->vaddr; /* TODO: Use mapping abstraction properly */ 106 } 107 108 switch (dbidev->rotation) { 109 default: 110 x1 = rect->x1; 111 x2 = rect->x2 - 1; 112 y1 = rect->y1; 113 y2 = rect->y2 - 1; 114 x_start = x1; 115 y_start = y1; 116 break; 117 case 90: 118 x1 = rect->y1; 119 x2 = rect->y2 - 1; 120 y1 = fb->width - rect->x2; 121 y2 = fb->width - rect->x1 - 1; 122 x_start = x1; 123 y_start = y2; 124 break; 125 case 180: 126 x1 = fb->width - rect->x2; 127 x2 = fb->width - rect->x1 - 1; 128 y1 = fb->height - rect->y2; 129 y2 = fb->height - rect->y1 - 1; 130 x_start = x2; 131 y_start = y2; 132 break; 133 case 270: 134 x1 = fb->height - rect->y2; 135 x2 = fb->height - rect->y1 - 1; 136 y1 = rect->x1; 137 y2 = rect->x2 - 1; 138 x_start = x2; 139 y_start = y1; 140 break; 141 } 142 143 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_1, x2); 144 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_2, x1); 145 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_1, y2); 146 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_2, y1); 147 148 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, x_start); 149 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, y_start); 150 151 ret = mipi_dbi_command_buf(dbi, ILI9225_WRITE_DATA_TO_GRAM, tr, 152 width * height * 2); 153 err_msg: 154 if (ret) 155 dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret); 156 } 157 158 static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe, 159 struct drm_plane_state *old_state) 160 { 161 struct drm_plane_state *state = pipe->plane.state; 162 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state); 163 struct drm_framebuffer *fb = state->fb; 164 struct drm_rect rect; 165 int idx; 166 167 if (!pipe->crtc.state->active) 168 return; 169 170 if (!drm_dev_enter(fb->dev, &idx)) 171 return; 172 173 if (drm_atomic_helper_damage_merged(old_state, state, &rect)) 174 ili9225_fb_dirty(&shadow_plane_state->data[0], fb, &rect); 175 176 drm_dev_exit(idx); 177 } 178 179 static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe, 180 struct drm_crtc_state *crtc_state, 181 struct drm_plane_state *plane_state) 182 { 183 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); 184 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); 185 struct drm_framebuffer *fb = plane_state->fb; 186 struct device *dev = pipe->crtc.dev->dev; 187 struct mipi_dbi *dbi = &dbidev->dbi; 188 struct drm_rect rect = { 189 .x1 = 0, 190 .x2 = fb->width, 191 .y1 = 0, 192 .y2 = fb->height, 193 }; 194 int ret, idx; 195 u8 am_id; 196 197 if (!drm_dev_enter(pipe->crtc.dev, &idx)) 198 return; 199 200 DRM_DEBUG_KMS("\n"); 201 202 mipi_dbi_hw_reset(dbi); 203 204 /* 205 * There don't seem to be two example init sequences that match, so 206 * using the one from the popular Arduino library for this display. 207 * https://github.com/Nkawu/TFT_22_ILI9225/blob/master/src/TFT_22_ILI9225.cpp 208 */ 209 210 ret = ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0000); 211 if (ret) { 212 DRM_DEV_ERROR(dev, "Error sending command %d\n", ret); 213 goto out_exit; 214 } 215 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0000); 216 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x0000); 217 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x0000); 218 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x0000); 219 220 msleep(40); 221 222 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0018); 223 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x6121); 224 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x006f); 225 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x495f); 226 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0800); 227 228 msleep(10); 229 230 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x103b); 231 232 msleep(50); 233 234 switch (dbidev->rotation) { 235 default: 236 am_id = 0x30; 237 break; 238 case 90: 239 am_id = 0x18; 240 break; 241 case 180: 242 am_id = 0x00; 243 break; 244 case 270: 245 am_id = 0x28; 246 break; 247 } 248 ili9225_command(dbi, ILI9225_DRIVER_OUTPUT_CONTROL, 0x011c); 249 ili9225_command(dbi, ILI9225_LCD_AC_DRIVING_CONTROL, 0x0100); 250 ili9225_command(dbi, ILI9225_ENTRY_MODE, 0x1000 | am_id); 251 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000); 252 ili9225_command(dbi, ILI9225_BLANK_PERIOD_CONTROL_1, 0x0808); 253 ili9225_command(dbi, ILI9225_FRAME_CYCLE_CONTROL, 0x1100); 254 ili9225_command(dbi, ILI9225_INTERFACE_CONTROL, 0x0000); 255 ili9225_command(dbi, ILI9225_OSCILLATION_CONTROL, 0x0d01); 256 ili9225_command(dbi, ILI9225_VCI_RECYCLING, 0x0020); 257 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, 0x0000); 258 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, 0x0000); 259 260 ili9225_command(dbi, ILI9225_GATE_SCAN_CONTROL, 0x0000); 261 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_1, 0x00db); 262 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_2, 0x0000); 263 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_3, 0x0000); 264 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_1, 0x00db); 265 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_2, 0x0000); 266 267 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_1, 0x0000); 268 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_2, 0x0808); 269 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_3, 0x080a); 270 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_4, 0x000a); 271 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_5, 0x0a08); 272 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_6, 0x0808); 273 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_7, 0x0000); 274 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_8, 0x0a00); 275 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_9, 0x0710); 276 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_10, 0x0710); 277 278 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0012); 279 280 msleep(50); 281 282 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x1017); 283 284 ili9225_fb_dirty(&shadow_plane_state->data[0], fb, &rect); 285 286 out_exit: 287 drm_dev_exit(idx); 288 } 289 290 static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe) 291 { 292 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); 293 struct mipi_dbi *dbi = &dbidev->dbi; 294 295 DRM_DEBUG_KMS("\n"); 296 297 /* 298 * This callback is not protected by drm_dev_enter/exit since we want to 299 * turn off the display on regular driver unload. It's highly unlikely 300 * that the underlying SPI controller is gone should this be called after 301 * unplug. 302 */ 303 304 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000); 305 msleep(50); 306 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0007); 307 msleep(50); 308 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0a02); 309 } 310 311 static int ili9225_dbi_command(struct mipi_dbi *dbi, u8 *cmd, u8 *par, 312 size_t num) 313 { 314 struct spi_device *spi = dbi->spi; 315 unsigned int bpw = 8; 316 u32 speed_hz; 317 int ret; 318 319 gpiod_set_value_cansleep(dbi->dc, 0); 320 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1); 321 ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, cmd, 1); 322 if (ret || !num) 323 return ret; 324 325 if (*cmd == ILI9225_WRITE_DATA_TO_GRAM && !dbi->swap_bytes) 326 bpw = 16; 327 328 gpiod_set_value_cansleep(dbi->dc, 1); 329 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num); 330 331 return mipi_dbi_spi_transfer(spi, speed_hz, bpw, par, num); 332 } 333 334 static const struct drm_simple_display_pipe_funcs ili9225_pipe_funcs = { 335 .mode_valid = mipi_dbi_pipe_mode_valid, 336 .enable = ili9225_pipe_enable, 337 .disable = ili9225_pipe_disable, 338 .update = ili9225_pipe_update, 339 .begin_fb_access = mipi_dbi_pipe_begin_fb_access, 340 .end_fb_access = mipi_dbi_pipe_end_fb_access, 341 .reset_plane = mipi_dbi_pipe_reset_plane, 342 .duplicate_plane_state = mipi_dbi_pipe_duplicate_plane_state, 343 .destroy_plane_state = mipi_dbi_pipe_destroy_plane_state, 344 }; 345 346 static const struct drm_display_mode ili9225_mode = { 347 DRM_SIMPLE_MODE(176, 220, 35, 44), 348 }; 349 350 DEFINE_DRM_GEM_DMA_FOPS(ili9225_fops); 351 352 static const struct drm_driver ili9225_driver = { 353 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, 354 .fops = &ili9225_fops, 355 DRM_GEM_DMA_DRIVER_OPS_VMAP, 356 .name = "ili9225", 357 .desc = "Ilitek ILI9225", 358 .date = "20171106", 359 .major = 1, 360 .minor = 0, 361 }; 362 363 static const struct of_device_id ili9225_of_match[] = { 364 { .compatible = "vot,v220hf01a-t" }, 365 {}, 366 }; 367 MODULE_DEVICE_TABLE(of, ili9225_of_match); 368 369 static const struct spi_device_id ili9225_id[] = { 370 { "v220hf01a-t", 0 }, 371 { }, 372 }; 373 MODULE_DEVICE_TABLE(spi, ili9225_id); 374 375 static int ili9225_probe(struct spi_device *spi) 376 { 377 struct device *dev = &spi->dev; 378 struct mipi_dbi_dev *dbidev; 379 struct drm_device *drm; 380 struct mipi_dbi *dbi; 381 struct gpio_desc *rs; 382 u32 rotation = 0; 383 int ret; 384 385 dbidev = devm_drm_dev_alloc(dev, &ili9225_driver, 386 struct mipi_dbi_dev, drm); 387 if (IS_ERR(dbidev)) 388 return PTR_ERR(dbidev); 389 390 dbi = &dbidev->dbi; 391 drm = &dbidev->drm; 392 393 dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); 394 if (IS_ERR(dbi->reset)) 395 return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); 396 397 rs = devm_gpiod_get(dev, "rs", GPIOD_OUT_LOW); 398 if (IS_ERR(rs)) 399 return dev_err_probe(dev, PTR_ERR(rs), "Failed to get GPIO 'rs'\n"); 400 401 device_property_read_u32(dev, "rotation", &rotation); 402 403 ret = mipi_dbi_spi_init(spi, dbi, rs); 404 if (ret) 405 return ret; 406 407 /* override the command function set in mipi_dbi_spi_init() */ 408 dbi->command = ili9225_dbi_command; 409 410 ret = mipi_dbi_dev_init(dbidev, &ili9225_pipe_funcs, &ili9225_mode, rotation); 411 if (ret) 412 return ret; 413 414 drm_mode_config_reset(drm); 415 416 ret = drm_dev_register(drm, 0); 417 if (ret) 418 return ret; 419 420 spi_set_drvdata(spi, drm); 421 422 drm_fbdev_generic_setup(drm, 0); 423 424 return 0; 425 } 426 427 static void ili9225_remove(struct spi_device *spi) 428 { 429 struct drm_device *drm = spi_get_drvdata(spi); 430 431 drm_dev_unplug(drm); 432 drm_atomic_helper_shutdown(drm); 433 } 434 435 static void ili9225_shutdown(struct spi_device *spi) 436 { 437 drm_atomic_helper_shutdown(spi_get_drvdata(spi)); 438 } 439 440 static struct spi_driver ili9225_spi_driver = { 441 .driver = { 442 .name = "ili9225", 443 .owner = THIS_MODULE, 444 .of_match_table = ili9225_of_match, 445 }, 446 .id_table = ili9225_id, 447 .probe = ili9225_probe, 448 .remove = ili9225_remove, 449 .shutdown = ili9225_shutdown, 450 }; 451 module_spi_driver(ili9225_spi_driver); 452 453 MODULE_DESCRIPTION("Ilitek ILI9225 DRM driver"); 454 MODULE_AUTHOR("David Lechner <david@lechnology.com>"); 455 MODULE_LICENSE("GPL"); 456