xref: /linux/drivers/gpu/drm/panel/Kconfig (revision f747473a838ecc25e842e3c60ea95a5175be932e) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ANBERNIC_TD4310
21	tristate "Anbernic TD4310 LCD panel"
22	depends on GPIOLIB && OF
23	depends on DRM_MIPI_DSI
24	depends on BACKLIGHT_CLASS_DEVICE
25	help
26	  Say Y here to enable support for Anbernic designed panels with the
27	  TD4310 panel controller such as the ones used on the Anbernic RG
28	  Vita Pro.
29
30config DRM_PANEL_ARM_VERSATILE
31	tristate "ARM Versatile panel driver"
32	depends on OF
33	depends on MFD_SYSCON
34	select VIDEOMODE_HELPERS
35	help
36	  This driver supports the ARM Versatile panels connected to ARM
37	  reference designs. The panel is detected using special registers
38	  in the Versatile family syscon registers.
39
40config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
41	tristate "ASUS Z00T TM5P5 NT35596 panel"
42	depends on GPIOLIB && OF
43	depends on DRM_MIPI_DSI
44	depends on BACKLIGHT_CLASS_DEVICE
45	help
46	  Say Y here if you want to enable support for the ASUS TMP5P5
47	  NT35596 1080x1920 video mode panel as found in some Asus
48	  Zenfone 2 Laser Z00T devices.
49
50config DRM_PANEL_AUO_A030JTN01
51	tristate "AUO A030JTN01"
52	depends on SPI
53	select REGMAP_SPI
54	help
55	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
56	  as found in the YLM RS-97 handheld gaming console.
57
58config DRM_PANEL_BOE_BF060Y8M_AJ0
59	tristate "Boe BF060Y8M-AJ0 panel"
60	depends on OF
61	depends on DRM_MIPI_DSI
62	depends on BACKLIGHT_CLASS_DEVICE
63	help
64	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
65	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
66	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
67	  the host and backlight is controlled through DSI commands.
68
69config DRM_PANEL_BOE_HIMAX8279D
70	tristate "Boe Himax8279d panel"
71	depends on OF
72	depends on DRM_MIPI_DSI
73	depends on BACKLIGHT_CLASS_DEVICE
74	help
75	  Say Y here if you want to enable support for Boe Himax8279d
76	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
77	  24 bit RGB per pixel. It provides a MIPI DSI interface to
78	  the host and has a built-in LED backlight.
79
80config DRM_PANEL_BOE_TD4320
81	tristate "BOE TD4320 DSI panel"
82	depends on OF
83	depends on DRM_MIPI_DSI
84	depends on BACKLIGHT_CLASS_DEVICE
85	help
86	  Say Y here if you want to enable support for BOE TD4320 1080x2340
87	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
88
89config DRM_PANEL_BOE_TH101MB31UIG002_28A
90	tristate "Boe TH101MB31UIG002-28A panel"
91	depends on OF
92	depends on DRM_MIPI_DSI
93	depends on BACKLIGHT_CLASS_DEVICE
94	help
95	  Say Y here if you want to enable support for Boe
96	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
97	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
98	  interface to the host and has a built-in LED backlight.
99
100config DRM_PANEL_BOE_TV101WUM_NL6
101	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
102	depends on OF
103	depends on DRM_MIPI_DSI
104	depends on BACKLIGHT_CLASS_DEVICE
105	help
106	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
107	  45NA WUXGA PANEL DSI Video Mode panel
108
109config DRM_PANEL_BOE_TV101WUM_LL2
110	tristate "BOE TV101WUM LL2 1200x1920 panel"
111	depends on OF
112	depends on DRM_MIPI_DSI
113	depends on BACKLIGHT_CLASS_DEVICE
114	help
115	  Say Y here if you want to support for BOE TV101WUM-LL2
116	  WUXGA PANEL DSI Video Mode panel
117
118config DRM_PANEL_CHIPONE_ICNA35XX
119	tristate "Chipone ICNA35XX panel driver"
120	depends on OF
121	depends on DRM_MIPI_DSI
122	depends on BACKLIGHT_CLASS_DEVICE
123	select DRM_DISPLAY_HELPER
124	help
125	  Say Y here if you want to enable support for the panels built
126	  around the Chipone ICNA3512 and ICNA3520 display controllers,
127	  such as some Tianma panels used in AYN Odin2 Portal and Thor.
128
129config DRM_PANEL_CHIPWEALTH_CH13726A
130	tristate "CHIPWEALTH CH13726A-based DSI panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	select DRM_DISPLAY_DP_HELPER
135	select DRM_DISPLAY_HELPER
136	help
137	  Say Y here if you want to enable support for ChipWealth
138	  CH13726A-based display panels.
139
140config DRM_PANEL_EBBG_FT8719
141	tristate "EBBG FT8719 panel driver"
142	depends on GPIOLIB
143	depends on OF
144	depends on DRM_MIPI_DSI
145	depends on BACKLIGHT_CLASS_DEVICE
146	help
147	  Say Y here if you want to enable support for the EBBG FT8719
148	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
149	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
150	  interface to the host.
151
152config DRM_PANEL_ELIDA_KD35T133
153	tristate "Elida KD35T133 panel driver"
154	depends on OF
155	depends on DRM_MIPI_DSI
156	depends on BACKLIGHT_CLASS_DEVICE
157	help
158	  Say Y here if you want to enable support for the Elida
159	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
160	  system interfaces.
161
162config DRM_PANEL_FEIXIN_K101_IM2BA02
163	tristate "Feixin K101 IM2BA02 panel"
164	depends on OF
165	depends on DRM_MIPI_DSI
166	depends on BACKLIGHT_CLASS_DEVICE
167	help
168	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
169	  4-lane 800x1280 MIPI DSI panel.
170
171config DRM_PANEL_FEIYANG_FY07024DI26A30D
172	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
173	depends on OF
174	depends on DRM_MIPI_DSI
175	depends on BACKLIGHT_CLASS_DEVICE
176	help
177	  Say Y if you want to enable support for panels based on the
178	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
179
180config DRM_PANEL_FOCALTECH_OTA7290B
181	tristate "Focaltech OTA7290B"
182	depends on DRM_MIPI_DSI
183	depends on I2C
184	depends on BACKLIGHT_CLASS_DEVICE
185	select DRM_KMS_HELPER
186	help
187	  Enable support for panels using OTA7290B as a controller (for
188	  example, Waveshare 12.3" DSI TOUCH-A panel). Say Y here if you want
189	  to enable support for this panel. To compile this driver as a module,
190	  choose M here.
191
192config DRM_PANEL_DSI_CM
193	tristate "Generic DSI command mode panels"
194	depends on OF
195	depends on DRM_MIPI_DSI
196	depends on BACKLIGHT_CLASS_DEVICE
197	help
198	  DRM panel driver for DSI command mode panels with support for
199	  embedded and external backlights.
200
201config DRM_PANEL_LVDS
202	tristate "Generic LVDS panel driver"
203	depends on OF
204	depends on BACKLIGHT_CLASS_DEVICE
205	select VIDEOMODE_HELPERS
206	help
207	  This driver supports LVDS panels that don't require device-specific
208	  handling of power supplies or control signals. It implements automatic
209	  backlight handling if the panel is attached to a backlight controller.
210
211config DRM_PANEL_HIMAX_HX8279
212	tristate "Himax HX8279-based panels"
213	depends on OF
214	depends on DRM_MIPI_DSI
215	depends on BACKLIGHT_CLASS_DEVICE
216	help
217	  Say Y if you want to enable support for panels based on the
218	  Himax HX8279 controller, such as the Startek KD070FHFID078
219	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
220	  and others.
221
222config DRM_PANEL_HIMAX_HX83102
223	tristate "Himax HX83102-based panels"
224	depends on OF
225	depends on DRM_MIPI_DSI
226	depends on BACKLIGHT_CLASS_DEVICE
227	help
228	  Say Y if you want to enable support for panels based on the
229	  Himax HX83102 controller.
230
231config DRM_PANEL_HIMAX_HX83112A
232	tristate "Himax HX83112A-based DSI panel"
233	depends on OF
234	depends on DRM_MIPI_DSI
235	depends on BACKLIGHT_CLASS_DEVICE
236	select DRM_KMS_HELPER
237	help
238	  Say Y here if you want to enable support for Himax HX83112A-based
239	  display panels, such as the one found in the Fairphone 4 smartphone.
240
241config DRM_PANEL_HIMAX_HX83112B
242	tristate "Himax HX83112B-based DSI panel"
243	depends on OF
244	depends on DRM_MIPI_DSI
245	depends on BACKLIGHT_CLASS_DEVICE
246	select DRM_KMS_HELPER
247	help
248	  Say Y here if you want to enable support for Himax HX83112B-based
249	  display panels, such as the one found in the Fairphone 3 smartphone.
250
251config DRM_PANEL_HIMAX_HX83121A
252	tristate "Himax HX83121A-based DSI panel"
253	depends on OF
254	depends on DRM_MIPI_DSI
255	depends on BACKLIGHT_CLASS_DEVICE
256	select DRM_DISPLAY_DSC_HELPER
257	select DRM_KMS_HELPER
258	help
259	  Say Y here if you want to enable support for Himax HX83121A-based
260	  display panels, such as the one found in the HUAWEI Matebook E Go
261          series.
262
263config DRM_PANEL_HIMAX_HX8394
264	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
265	depends on OF
266	depends on DRM_MIPI_DSI
267	depends on BACKLIGHT_CLASS_DEVICE
268	help
269	  Say Y if you want to enable support for panels based on the
270	  Himax HX8394 controller, such as the HannStar HSD060BHW4
271	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
272
273	  If M is selected the module will be called panel-himax-hx8394.
274
275config DRM_PANEL_HYDIS_HV101HD1
276	tristate "Hydis HV101HD1 panel"
277	depends on OF
278	depends on DRM_MIPI_DSI
279	depends on BACKLIGHT_CLASS_DEVICE
280	help
281	  Say Y here if you want to enable support for the Hydis HV101HD1
282	  2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT TF600T.
283	  HV101HD1 is a color active matrix TFT LCD module using amorphous
284	  silicon TFT's (Thin Film Transistors) as an active switching devices.
285
286	  If M is selected the module will be called panel-hydis-hv101hd1
287
288config DRM_PANEL_ILITEK_IL9322
289	tristate "Ilitek ILI9322 320x240 QVGA panels"
290	depends on OF && SPI
291	select REGMAP
292	help
293	  Say Y here if you want to enable support for Ilitek IL9322
294	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
295
296config DRM_PANEL_ILITEK_ILI9341
297	tristate "Ilitek ILI9341 240x320 QVGA panels"
298	depends on SPI
299	select DRM_KMS_HELPER
300	select DRM_GEM_DMA_HELPER
301	depends on BACKLIGHT_CLASS_DEVICE
302	select DRM_MIPI_DBI
303	help
304	  Say Y here if you want to enable support for Ilitek IL9341
305	  QVGA (240x320) RGB panels. support serial & parallel rgb
306	  interface.
307
308config DRM_PANEL_ILITEK_ILI9805
309	tristate "Ilitek ILI9805-based panels"
310	depends on OF
311	depends on DRM_MIPI_DSI
312	depends on BACKLIGHT_CLASS_DEVICE
313	help
314	  Say Y if you want to enable support for panels based on the
315	  Ilitek ILI9805 controller.
316
317config DRM_PANEL_ILITEK_ILI9806E_CORE
318	tristate
319
320config DRM_PANEL_ILITEK_ILI9806E_DSI
321	tristate "Ilitek ILI9806E-based DSI panels"
322	depends on OF
323	depends on DRM_MIPI_DSI
324	depends on BACKLIGHT_CLASS_DEVICE
325	select DRM_PANEL_ILITEK_ILI9806E_CORE
326	help
327	  Say Y if you want to enable support for panels based on the
328	  Ilitek ILI9806E controller using DSI.
329
330config DRM_PANEL_ILITEK_ILI9806E_SPI
331	tristate "Ilitek ILI9806E-based RGB SPI panel"
332	depends on OF
333	depends on SPI
334	depends on BACKLIGHT_CLASS_DEVICE
335	select DRM_MIPI_DBI
336	select VIDEOMODE_HELPERS
337	select DRM_PANEL_ILITEK_ILI9806E_CORE
338	help
339	  Say Y if you want to enable support for panels based on the
340	  Ilitek ILI9806E controller using SPI.
341
342config DRM_PANEL_ILITEK_ILI9881C
343	tristate "Ilitek ILI9881C-based panels"
344	depends on OF
345	depends on DRM_MIPI_DSI
346	depends on BACKLIGHT_CLASS_DEVICE
347	help
348	  Say Y if you want to enable support for panels based on the
349	  Ilitek ILI9881c controller.
350
351config DRM_PANEL_ILITEK_ILI9882T
352	tristate "Ilitek ILI9882t-based panels"
353	depends on OF
354	depends on DRM_MIPI_DSI
355	depends on BACKLIGHT_CLASS_DEVICE
356	select DRM_DISPLAY_DSC_HELPER
357	help
358	  Say Y if you want to enable support for panels based on the
359	  Ilitek ILI9882t controller.
360
361config DRM_PANEL_INNOLUX_EJ030NA
362        tristate "Innolux EJ030NA 320x480 LCD panel"
363        depends on OF && SPI
364        select REGMAP_SPI
365        help
366          Say Y here to enable support for the Innolux/Chimei EJ030NA
367          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
368          and LDK handheld gaming consoles.
369
370config DRM_PANEL_INNOLUX_P079ZCA
371	tristate "Innolux P079ZCA panel"
372	depends on OF
373	depends on DRM_MIPI_DSI
374	depends on BACKLIGHT_CLASS_DEVICE
375	help
376	  Say Y here if you want to enable support for Innolux P079ZCA
377	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
378	  24 bit RGB per pixel. It provides a MIPI DSI interface to
379	  the host and has a built-in LED backlight.
380
381config DRM_PANEL_JADARD_JD9365DA_H3
382	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
383	depends on OF
384	depends on DRM_MIPI_DSI
385	depends on BACKLIGHT_CLASS_DEVICE
386	select DRM_KMS_HELPER
387	help
388	  Say Y here if you want to enable support for Jadard JD9365DA-H3
389	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
390	  800RGBx1280 dots at maximum.
391
392config DRM_PANEL_JDI_LPM102A188A
393	tristate "JDI LPM102A188A DSI panel"
394	depends on GPIOLIB
395	depends on OF
396	depends on DRM_MIPI_DSI
397	depends on BACKLIGHT_CLASS_DEVICE
398	help
399	  Say Y here if you want to enable support for JDI LPM102A188A DSI
400	  command mode panel as found in Google Pixel C devices.
401	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
402	  to the host.
403
404config DRM_PANEL_JDI_LT070ME05000
405	tristate "JDI LT070ME05000 WUXGA DSI panel"
406	depends on OF
407	depends on DRM_MIPI_DSI
408	depends on BACKLIGHT_CLASS_DEVICE
409	help
410	  Say Y here if you want to enable support for JDI DSI video mode
411	  panel as found in Google Nexus 7 (2013) devices.
412	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
413	  24 bit per pixel.
414
415config DRM_PANEL_JDI_R63452
416	tristate "JDI R63452 Full HD DSI panel"
417	depends on OF
418	depends on DRM_MIPI_DSI
419	depends on BACKLIGHT_CLASS_DEVICE
420	help
421	  Say Y here if you want to enable support for the JDI R63452
422	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
423
424config DRM_PANEL_KHADAS_TS050
425	tristate "Khadas TS050 panel"
426	depends on OF
427	depends on DRM_MIPI_DSI
428	depends on BACKLIGHT_CLASS_DEVICE
429	help
430	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
431	  panel module. The panel has a 1080x1920 resolution and uses
432	  24 bit RGB per pixel. It provides a MIPI DSI interface to
433	  the host, a built-in LED backlight and touch controller.
434
435config DRM_PANEL_KINGDISPLAY_KD097D04
436	tristate "Kingdisplay kd097d04 panel"
437	depends on OF
438	depends on DRM_MIPI_DSI
439	depends on BACKLIGHT_CLASS_DEVICE
440	help
441	  Say Y here if you want to enable support for Kingdisplay kd097d04
442	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
443	  24 bit RGB per pixel. It provides a MIPI DSI interface to
444	  the host and has a built-in LED backlight.
445
446config DRM_PANEL_LEADTEK_LTK050H3146W
447	tristate "Leadtek LTK050H3146W panel"
448	depends on OF
449	depends on DRM_MIPI_DSI
450	depends on BACKLIGHT_CLASS_DEVICE
451	help
452	  Say Y here if you want to enable support for Leadtek LTK050H3146W
453	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
454	  24 bit RGB per pixel. It provides a MIPI DSI interface to
455	  the host and has a built-in LED backlight.
456
457config DRM_PANEL_LEADTEK_LTK500HD1829
458	tristate "Leadtek LTK500HD1829 panel"
459	depends on OF
460	depends on DRM_MIPI_DSI
461	depends on BACKLIGHT_CLASS_DEVICE
462	help
463	  Say Y here if you want to enable support for Kingdisplay kd097d04
464	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
465	  24 bit RGB per pixel. It provides a MIPI DSI interface to
466	  the host and has a built-in LED backlight.
467
468config DRM_PANEL_LINCOLNTECH_LCD197
469	tristate "Lincoln Technologies lcd197 panel"
470	depends on OF
471	depends on DRM_MIPI_DSI
472	depends on BACKLIGHT_CLASS_DEVICE
473	help
474	  Say Y here if you want to enable support for lincolntech lcd197
475	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
476	  24 bit RGB per pixel. It provides a MIPI DSI interface to
477	  the host.
478
479config DRM_PANEL_LG_LB035Q02
480	tristate "LG LB035Q024573 RGB panel"
481	depends on GPIOLIB && OF && SPI
482	help
483	  Say Y here if you want to enable support for the LB035Q02 RGB panel
484	  (found on the Gumstix Overo Palo35 board). To compile this driver as
485	  a module, choose M here.
486
487config DRM_PANEL_LG_LD070WX3
488	tristate "LG LD070WX3 MIPI DSI panel"
489	depends on OF
490	depends on DRM_MIPI_DSI
491	depends on BACKLIGHT_CLASS_DEVICE
492	select VIDEOMODE_HELPERS
493	help
494	  Say Y here if you want to enable support for the LD070WX3 MIPI DSI
495	  panel found in the NVIDIA Tegra Note 7 tablet.
496
497	  To compile this driver as a module, choose M here: the module will
498	  be called panel-lg-ld070wx3.
499
500config DRM_PANEL_LG_LG4573
501	tristate "LG4573 RGB/SPI panel"
502	depends on OF && SPI
503	select VIDEOMODE_HELPERS
504	help
505	  Say Y here if you want to enable support for LG4573 RGB panel.
506	  To compile this driver as a module, choose M here.
507
508config DRM_PANEL_LG_SW43408
509	tristate "LG SW43408 panel"
510	depends on GPIOLIB
511	depends on OF
512	depends on DRM_MIPI_DSI
513	depends on BACKLIGHT_CLASS_DEVICE
514	select DRM_DISPLAY_DSC_HELPER
515	select DRM_DISPLAY_HELPER
516	help
517	  Say Y here if you want to enable support for LG sw43408 panel.
518	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
519	  pixel. It provides a MIPI DSI interface to the host and has a
520	  built-in LED backlight.
521
522config DRM_PANEL_LXD_M9189A
523	tristate "LXD M9189A MIPI-DSI LCD panel"
524	depends on OF
525	depends on DRM_MIPI_DSI
526	depends on BACKLIGHT_CLASS_DEVICE
527	help
528	  Say Y if you want to enable support for the LXD M9189A 4-Lane
529	  1024x600 MIPI DSI panel.
530
531config DRM_PANEL_MAGNACHIP_D53E6EA8966
532	tristate "Magnachip D53E6EA8966 DSI panel"
533	depends on OF && SPI
534	depends on DRM_MIPI_DSI
535	depends on BACKLIGHT_CLASS_DEVICE
536	select DRM_MIPI_DBI
537	help
538	  DRM panel driver for the Samsung AMS495QA01 panel controlled
539	  with the Magnachip D53E6EA8966 panel IC. This panel receives
540	  video data via DSI but commands via 9-bit SPI using DBI.
541
542config DRM_PANEL_MANTIX_MLAF057WE51
543	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
544	depends on OF
545	depends on DRM_MIPI_DSI
546	depends on BACKLIGHT_CLASS_DEVICE
547	help
548	  Say Y here if you want to enable support for the Mantix
549	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
550	  has a resolution of 720x1440 pixels, a built in backlight and touch
551	  controller.
552
553config DRM_PANEL_MOTOROLA_MOT
554	tristate "Atrix 4G and Droid X2 540x960 DSI video mode panel"
555	depends on OF
556	depends on DRM_MIPI_DSI
557	depends on BACKLIGHT_CLASS_DEVICE
558	select VIDEOMODE_HELPERS
559	help
560	  Say Y here if you want to enable support for the LCD panel module
561	  for Motorola Atrix 4G or Droid X2. Exact panel vendor and model are
562	  unknown. The panel has a 540x960 resolution and uses 24 bit RGB per
563	  pixel.
564
565config DRM_PANEL_NEC_NL8048HL11
566	tristate "NEC NL8048HL11 RGB panel"
567	depends on GPIOLIB && OF && SPI
568	help
569	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
570	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
571	  as a module, choose M here.
572
573config DRM_PANEL_NEWVISION_NV3051D
574	tristate "NewVision NV3051D DSI panel"
575	depends on OF
576	depends on DRM_MIPI_DSI
577	depends on BACKLIGHT_CLASS_DEVICE
578	help
579	  This driver supports the NV3051D based panel found on the Anbernic
580	  RG353P and RG353V.
581
582config DRM_PANEL_NEWVISION_NV3052C
583	tristate "NewVision NV3052C RGB/SPI panel"
584	depends on OF && SPI
585	depends on BACKLIGHT_CLASS_DEVICE
586	select DRM_MIPI_DBI
587	help
588	  Say Y here if you want to enable support for the panels built
589	  around the NewVision NV3052C display controller.
590
591config DRM_PANEL_NOVATEK_NT35510
592	tristate "Novatek NT35510 RGB panel driver"
593	depends on OF
594	depends on DRM_MIPI_DSI
595	depends on BACKLIGHT_CLASS_DEVICE
596	help
597	  Say Y here if you want to enable support for the panels built
598	  around the Novatek NT35510 display controller, such as some
599	  Hydis panels.
600
601config DRM_PANEL_NOVATEK_NT35532
602	tristate "Novatek NT35532-based DSI video mode panel"
603	depends on OF
604	depends on DRM_MIPI_DSI
605	depends on BACKLIGHT_CLASS_DEVICE
606	select DRM_KMS_HELPER
607	help
608	  Say Y or M here if you want to enable support for Novatek
609	  NT35532-based 1080p video mode DSI panels.
610
611config DRM_PANEL_NOVATEK_NT35560
612	tristate "Novatek NT35560 DSI command mode panel"
613	depends on OF
614	depends on DRM_MIPI_DSI
615	depends on BACKLIGHT_CLASS_DEVICE
616	select VIDEOMODE_HELPERS
617	help
618	  Say Y here if you want to enable the Novatek NT35560 display
619	  controller. This panel supports DSI in both command and video
620	  mode. This supports several panels such as Sony ACX424AKM and
621	  ACX424AKP.
622
623config DRM_PANEL_NOVATEK_NT35950
624	tristate "Novatek NT35950 DSI panel"
625	depends on OF
626	depends on DRM_MIPI_DSI
627	depends on BACKLIGHT_CLASS_DEVICE
628	help
629	  Say Y here if you want to enable support for the panels built
630	  around the Novatek NT35950 display controller, such as some
631	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
632	  mobile phones.
633
634config DRM_PANEL_NOVATEK_NT36523
635	tristate "Novatek NT36523 panel driver"
636	depends on OF
637	depends on DRM_MIPI_DSI
638	depends on BACKLIGHT_CLASS_DEVICE
639	help
640	  Say Y here if you want to enable support for the panels built
641	  around the Novatek NT36523 display controller, such as some
642	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
643
644config DRM_PANEL_NOVATEK_NT36672A
645	tristate "Novatek NT36672A DSI panel"
646	depends on GPIOLIB
647	depends on OF
648	depends on DRM_MIPI_DSI
649	depends on BACKLIGHT_CLASS_DEVICE
650	help
651	  Say Y here if you want to enable support for the panels built
652	  around the Novatek NT36672A display controller, such as some
653	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
654
655config DRM_PANEL_NOVATEK_NT36672E
656	tristate "Novatek NT36672E DSI panel"
657	depends on GPIOLIB
658	depends on OF
659	depends on DRM_MIPI_DSI
660	depends on BACKLIGHT_CLASS_DEVICE
661	help
662	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
663	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
664	  RGB per pixel.
665
666config DRM_PANEL_NOVATEK_NT37700F
667	tristate "Novatek NT37700F DSI panel"
668	depends on OF
669	depends on DRM_MIPI_DSI
670	depends on BACKLIGHT_CLASS_DEVICE
671	help
672	  Say Y here if you want to enable support for Novatek NT37700F DSI
673	  panel module. The panel has a resolution of 1080x2160.
674
675config DRM_PANEL_NOVATEK_NT37801
676	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
677	depends on OF
678	depends on DRM_MIPI_DSI
679	depends on BACKLIGHT_CLASS_DEVICE
680	select DRM_DISPLAY_DSC_HELPER
681	select DRM_DISPLAY_HELPER
682	help
683	  Say Y here if you want to enable support for Novatek NT37801 (or
684	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
685	  resolution.
686
687config DRM_PANEL_NOVATEK_NT39016
688	tristate "Novatek NT39016 RGB/SPI panel"
689	depends on OF && SPI
690	depends on BACKLIGHT_CLASS_DEVICE
691	select REGMAP_SPI
692	help
693	  Say Y here if you want to enable support for the panels built
694	  around the Novatek NT39016 display controller.
695
696config DRM_PANEL_OLIMEX_LCD_OLINUXINO
697	tristate "Olimex LCD-OLinuXino panel"
698	depends on OF
699	depends on I2C
700	depends on BACKLIGHT_CLASS_DEVICE
701	select CRC32
702	help
703	  The panel is used with different sizes LCDs, from 480x272 to
704	  1280x800, and 24 bit per pixel.
705
706	  Say Y here if you want to enable support for Olimex Ltd.
707	  LCD-OLinuXino panel.
708
709config DRM_PANEL_ORISETECH_OTA5601A
710        tristate "Orise Technology ota5601a RGB/SPI panel"
711        depends on SPI
712        depends on BACKLIGHT_CLASS_DEVICE
713        select REGMAP_SPI
714        help
715          Say Y here if you want to enable support for the panels built
716          around the Orise Technology OTA9601A display controller.
717
718config DRM_PANEL_ORISETECH_OTM8009A
719	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
720	depends on OF
721	depends on DRM_MIPI_DSI
722	depends on BACKLIGHT_CLASS_DEVICE
723	help
724	  Say Y here if you want to enable support for Orise Technology
725	  otm8009a 480x800 dsi 2dl panel.
726
727config DRM_PANEL_OSD_OSD101T2587_53TS
728	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
729	depends on OF
730	depends on DRM_MIPI_DSI
731	depends on BACKLIGHT_CLASS_DEVICE
732	help
733	  Say Y here if you want to enable support for One Stop Displays
734	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
735
736config DRM_PANEL_PANASONIC_VVX10F034N00
737	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
738	depends on OF
739	depends on DRM_MIPI_DSI
740	depends on BACKLIGHT_CLASS_DEVICE
741	help
742	  Say Y here if you want to enable support for Panasonic VVX10F034N00
743	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
744	  Xperia Z2 tablets
745
746config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
747	tristate "Raspberry Pi 7-inch touchscreen panel"
748	depends on DRM_MIPI_DSI
749	help
750	  Say Y here if you want to enable support for the Raspberry
751	  Pi 7" Touchscreen.  To compile this driver as a module,
752	  choose M here.
753
754config DRM_PANEL_RAYDIUM_RM67191
755	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
756	depends on OF
757	depends on DRM_MIPI_DSI
758	depends on BACKLIGHT_CLASS_DEVICE
759	help
760	  Say Y here if you want to enable support for Raydium RM67191 FHD
761	  (1080x1920) DSI panel.
762
763config DRM_PANEL_RAYDIUM_RM67200
764	tristate "Raydium RM67200-based DSI panel"
765	depends on OF
766	depends on DRM_MIPI_DSI
767	help
768	  Say Y here if you want to enable support for Raydium RM67200-based
769	  DSI video mode panels. This panel controller can be found in the
770	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
771	  evaluation boards.
772
773config DRM_PANEL_RAYDIUM_RM68200
774	tristate "Raydium RM68200 720x1280 DSI video mode panel"
775	depends on OF
776	depends on DRM_MIPI_DSI
777	depends on BACKLIGHT_CLASS_DEVICE
778	help
779	  Say Y here if you want to enable support for Raydium RM68200
780	  720x1280 DSI video mode panel.
781
782config DRM_PANEL_RAYDIUM_RM692E5
783	tristate "Raydium RM692E5-based DSI panel"
784	depends on OF
785	depends on DRM_MIPI_DSI
786	depends on BACKLIGHT_CLASS_DEVICE
787	select DRM_DISPLAY_DSC_HELPER
788	select DRM_DISPLAY_HELPER
789	help
790	  Say Y here if you want to enable support for Raydium RM692E5-based
791	  display panels, such as the one found in the Fairphone 5 smartphone.
792
793config DRM_PANEL_RAYDIUM_RM69380
794	tristate "Raydium RM69380-based DSI panel"
795	depends on GPIOLIB
796	depends on OF
797	depends on DRM_MIPI_DSI
798	depends on BACKLIGHT_CLASS_DEVICE
799	help
800	  Say Y here if you want to enable support for Raydium RM69380-based
801	  display panels.
802
803	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
804	  in combination with an EDO OLED panel.
805
806config DRM_PANEL_RENESAS_R61307
807	tristate "Renesas R61307 DSI video mode panel"
808	depends on OF
809	depends on DRM_MIPI_DSI
810	depends on BACKLIGHT_CLASS_DEVICE
811	select VIDEOMODE_HELPERS
812	help
813	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
814	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
815	  resolution and uses 24 bit RGB per pixel.
816
817	  This panel controller can be found in LG Optimus Vu P895 smartphone
818	  in combination with LCD panel.
819
820config DRM_PANEL_RENESAS_R69328
821	tristate "Renesas R69328 720x1280 DSI video mode panel"
822	depends on OF
823	depends on DRM_MIPI_DSI
824	depends on BACKLIGHT_CLASS_DEVICE
825	select VIDEOMODE_HELPERS
826	help
827	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
828	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
829	  resolution and uses 24 bit RGB per pixel.
830
831	  This panel controller can be found in LG Optimus 4X P895 smartphone
832	  in combination with LCD panel.
833
834config DRM_PANEL_RONBO_RB070D30
835	tristate "Ronbo Electronics RB070D30 panel"
836	depends on OF
837	depends on DRM_MIPI_DSI
838	depends on BACKLIGHT_CLASS_DEVICE
839	help
840	  Say Y here if you want to enable support for Ronbo Electronics
841	  RB070D30 1024x600 DSI panel.
842
843config DRM_PANEL_SAMSUNG_AMS581VF01
844	tristate "Samsung AMS581VF01 panel"
845	depends on OF
846	depends on DRM_MIPI_DSI
847	depends on BACKLIGHT_CLASS_DEVICE
848	help
849	  Say Y or M here if you want to enable support for the
850	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
851
852config DRM_PANEL_SAMSUNG_AMS639RQ08
853	tristate "Samsung AMS639RQ08 panel"
854	depends on OF
855	depends on DRM_MIPI_DSI
856	depends on BACKLIGHT_CLASS_DEVICE
857	help
858	  Say Y or M here if you want to enable support for the
859	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
860
861config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
862	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
863	depends on GPIOLIB && OF && REGULATOR
864	depends on DRM_MIPI_DSI
865	depends on BACKLIGHT_CLASS_DEVICE
866	help
867	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
868	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
869	  GT-I9195I). To compile this driver as a module, choose M here.
870
871config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
872	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
873	depends on OF
874	select DRM_MIPI_DSI
875	select VIDEOMODE_HELPERS
876
877config DRM_PANEL_SAMSUNG_ATNA33XC20
878	tristate "Samsung ATNA33XC20 eDP panel"
879	depends on OF
880	depends on BACKLIGHT_CLASS_DEVICE
881	depends on PM
882	select DRM_DISPLAY_DP_HELPER
883	select DRM_DISPLAY_HELPER
884	select DRM_DISPLAY_DP_AUX_BUS
885	help
886	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
887	  be handled by the DRM_PANEL_SIMPLE driver because its power
888	  sequencing is non-standard.
889
890config DRM_PANEL_SAMSUNG_DB7430
891	tristate "Samsung DB7430-based DPI panels"
892	depends on OF && SPI && GPIOLIB
893	depends on BACKLIGHT_CLASS_DEVICE
894	select DRM_MIPI_DBI
895	help
896	  Say Y here if you want to enable support for the Samsung
897	  DB7430 DPI display controller used in such devices as the
898	  LMS397KF04 480x800 DPI panel.
899
900config DRM_PANEL_SAMSUNG_LD9040
901	tristate "Samsung LD9040 RGB/SPI panel"
902	depends on OF && SPI
903	depends on BACKLIGHT_CLASS_DEVICE
904	select VIDEOMODE_HELPERS
905
906config DRM_PANEL_SAMSUNG_LTL106HL02
907	tristate "Samsung LTL106HL02 panel"
908	depends on OF
909	depends on DRM_MIPI_DSI
910	depends on BACKLIGHT_CLASS_DEVICE
911	select VIDEOMODE_HELPERS
912	help
913	  Say Y here if you want to enable support for the Samsung LTL106HL02
914	  panel driver which is used in Microsoft Surface 2.
915
916	  To compile this driver as a module, choose M here: the module
917	  will be called panel-samsung-ltl106hl02.
918
919config DRM_PANEL_SAMSUNG_S6E3FA7
920	tristate "Samsung S6E3FA7 panel driver"
921	depends on OF
922	depends on DRM_MIPI_DSI
923	depends on BACKLIGHT_CLASS_DEVICE
924	help
925	  Say Y here if you want to enable support for the Samsung S6E3FA7
926	  1920x2220 panel.
927
928config DRM_PANEL_SAMSUNG_S6D16D0
929	tristate "Samsung S6D16D0 DSI video mode panel"
930	depends on OF
931	depends on DRM_MIPI_DSI
932	select VIDEOMODE_HELPERS
933
934config DRM_PANEL_SAMSUNG_S6D27A1
935	tristate "Samsung S6D27A1 DPI panel driver"
936	depends on OF && SPI && GPIOLIB
937	select DRM_MIPI_DBI
938	help
939	  Say Y here if you want to enable support for the Samsung
940	  S6D27A1 DPI 480x800 panel.
941
942	  This panel can be found in Samsung Galaxy Ace 2
943	  GT-I8160 mobile phone.
944
945config DRM_PANEL_SAMSUNG_S6D7AA0
946	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
947	depends on OF
948	depends on BACKLIGHT_CLASS_DEVICE
949	select DRM_MIPI_DSI
950	select VIDEOMODE_HELPERS
951
952config DRM_PANEL_SAMSUNG_S6E3FC2X01
953	tristate "Samsung S6E3FC2X01 DSI panel controller"
954	depends on GPIOLIB
955	depends on OF
956	depends on DRM_MIPI_DSI
957	depends on BACKLIGHT_CLASS_DEVICE
958	help
959	  Say Y or M here if you want to enable support for the
960	  Samsung S6E3FC2 DDIC and connected MIPI DSI panel.
961	  Currently supported panels:
962
963	    Samsung AMS641RW (found in the OnePlus 6T smartphone)
964
965config DRM_PANEL_SAMSUNG_S6E3HA2
966	tristate "Samsung S6E3HA2 DSI video mode panel"
967	depends on OF
968	depends on DRM_MIPI_DSI
969	depends on BACKLIGHT_CLASS_DEVICE
970	select VIDEOMODE_HELPERS
971
972config DRM_PANEL_SAMSUNG_S6E3HA8
973	tristate "Samsung S6E3HA8 DSI video mode panel"
974	depends on GPIOLIB
975	depends on OF
976	depends on DRM_MIPI_DSI
977	depends on BACKLIGHT_CLASS_DEVICE
978	select DRM_DISPLAY_DSC_HELPER
979	help
980	  Say Y or M here if you want to enable support for the
981	  Samsung S6E3HA8 DDIC and connected MIPI DSI panel.
982	  Currently supported panels:
983
984	    Samsung AMB577PX01 (found in the Samsung S9 smartphone)
985
986
987config DRM_PANEL_SAMSUNG_S6E63J0X03
988	tristate "Samsung S6E63J0X03 DSI command mode panel"
989	depends on OF
990	depends on DRM_MIPI_DSI
991	depends on BACKLIGHT_CLASS_DEVICE
992	select VIDEOMODE_HELPERS
993
994config DRM_PANEL_SAMSUNG_S6E63M0
995	tristate "Samsung S6E63M0 RGB panel"
996	depends on OF
997	depends on BACKLIGHT_CLASS_DEVICE
998	help
999	  Say Y here if you want to enable support for Samsung S6E63M0
1000	  AMOLED LCD panel. This panel can be accessed using SPI or
1001	  DSI.
1002
1003config DRM_PANEL_SAMSUNG_S6E63M0_SPI
1004	tristate "Samsung S6E63M0 RGB SPI interface"
1005	depends on SPI
1006	depends on DRM_PANEL_SAMSUNG_S6E63M0
1007	default DRM_PANEL_SAMSUNG_S6E63M0
1008	select DRM_MIPI_DBI
1009	help
1010	  Say Y here if you want to be able to access the Samsung
1011	  S6E63M0 panel using SPI.
1012
1013config DRM_PANEL_SAMSUNG_S6E63M0_DSI
1014	tristate "Samsung S6E63M0 RGB DSI interface"
1015	depends on DRM_MIPI_DSI
1016	depends on DRM_PANEL_SAMSUNG_S6E63M0
1017	help
1018	  Say Y here if you want to be able to access the Samsung
1019	  S6E63M0 panel using DSI.
1020
1021config DRM_PANEL_SAMSUNG_S6E8AA0
1022	tristate "Samsung S6E8AA0 DSI video mode panel"
1023	depends on OF
1024	select DRM_MIPI_DSI
1025	select VIDEOMODE_HELPERS
1026
1027config DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01
1028	tristate "Samsung AMS561RA01 panel with S6E8AA5X01 controller"
1029	depends on GPIOLIB && OF && REGULATOR
1030	depends on DRM_MIPI_DSI
1031	depends on BACKLIGHT_CLASS_DEVICE
1032	help
1033	  Say Y here if you want to enable support for Samsung AMS561RA01
1034	  panel, which uses Samsung's S6E8AA5X01 controller. The panel has a
1035	  ~5.6 inch AMOLED display, and the controller is driven by the MIPI
1036	  DSI protocol with 4 lanes.
1037
1038config DRM_PANEL_SAMSUNG_S6E8FC0
1039	tristate "Samsung S6E8FC0 DSI controller"
1040	depends on OF
1041	depends on BACKLIGHT_CLASS_DEVICE
1042	select DRM_MIPI_DSI
1043	help
1044	  Say Y or M here if you want to enable support for the Samsung
1045	  S6E8FC0 DSI controller and connected panel.
1046	  Currently supported panels:
1047
1048	    M1906F9 (M1906F9SH or M1906F9SI), 6.09 inch 720x1560, found
1049	    in the Xiaomi Mi A3 smartphone (xiaomi-laurel).
1050
1051config DRM_PANEL_SAMSUNG_SOFEF00
1052	tristate "Samsung SOFEF00 DSI panel controller"
1053	depends on GPIOLIB
1054	depends on OF
1055	depends on DRM_MIPI_DSI
1056	depends on BACKLIGHT_CLASS_DEVICE
1057	help
1058	  Say Y or M here if you want to enable support for the Samsung AMOLED
1059	  panel SOFEF00 DDIC and connected panel.
1060	  Currently supported panels:
1061
1062	    Samsung AMS628NW01 (found in OnePlus 6, 1080x2280@60Hz)
1063
1064config DRM_PANEL_SEIKO_43WVF1G
1065	tristate "Seiko 43WVF1G panel"
1066	depends on OF
1067	depends on BACKLIGHT_CLASS_DEVICE
1068	select VIDEOMODE_HELPERS
1069	help
1070	  Say Y here if you want to enable support for the Seiko
1071	  43WVF1G controller for 800x480 LCD panels
1072
1073config DRM_PANEL_SHARP_LQ079L1SX01
1074	tristate "Sharp LQ079L1SX01 panel"
1075	depends on OF
1076	depends on DRM_MIPI_DSI
1077	depends on BACKLIGHT_CLASS_DEVICE
1078	select VIDEOMODE_HELPERS
1079	help
1080	  Say Y here if you want to enable support for Sharp LQ079L1SX01
1081	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1082	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1083	  the host.
1084
1085	  To compile this driver as a module, choose M here: the module
1086	  will be called panel-sharp-lq079l1sx01.
1087
1088config DRM_PANEL_SHARP_LQ101R1SX01
1089	tristate "Sharp LQ101R1SX01 panel"
1090	depends on OF
1091	depends on DRM_MIPI_DSI
1092	depends on BACKLIGHT_CLASS_DEVICE
1093	help
1094	  Say Y here if you want to enable support for Sharp LQ101R1SX01
1095	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1096	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1097	  the host and has a built-in LED backlight.
1098
1099	  To compile this driver as a module, choose M here: the module
1100	  will be called panel-sharp-lq101r1sx01.
1101
1102config DRM_PANEL_SHARP_LS037V7DW01
1103	tristate "Sharp LS037V7DW01 VGA LCD panel"
1104	depends on GPIOLIB && OF && REGULATOR
1105	help
1106	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
1107	  (480x640) LCD panel (found on the TI SDP3430 board).
1108
1109config DRM_PANEL_SHARP_LS043T1LE01
1110	tristate "Sharp LS043T1LE01 qHD video mode panel"
1111	depends on OF
1112	depends on DRM_MIPI_DSI
1113	depends on BACKLIGHT_CLASS_DEVICE
1114	help
1115	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
1116	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
1117
1118config DRM_PANEL_SHARP_LS060T1SX01
1119	tristate "Sharp LS060T1SX01 FullHD video mode panel"
1120	depends on OF
1121	depends on DRM_MIPI_DSI
1122	depends on BACKLIGHT_CLASS_DEVICE
1123	help
1124	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
1125	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
1126	  Bundle.
1127
1128config DRM_PANEL_SITRONIX_ST7701
1129	tristate "Sitronix ST7701 panel driver"
1130	depends on OF
1131	depends on SPI || DRM_MIPI_DSI
1132	select DRM_MIPI_DBI if SPI
1133	depends on BACKLIGHT_CLASS_DEVICE
1134	help
1135	  Say Y here if you want to enable support for the Sitronix
1136	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
1137	  system interfaces.
1138
1139config DRM_PANEL_SITRONIX_ST7703
1140	tristate "Sitronix ST7703 based MIPI touchscreen panels"
1141	depends on OF
1142	depends on DRM_MIPI_DSI
1143	depends on BACKLIGHT_CLASS_DEVICE
1144	help
1145	  Say Y here if you want to enable support for Sitronix ST7703 based
1146	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
1147	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
1148	  in backlight and touch controller.
1149	  Touch input support is provided by the goodix driver and needs to be
1150	  selected separately.
1151
1152config DRM_PANEL_SITRONIX_ST7789V
1153	tristate "Sitronix ST7789V panel"
1154	depends on OF && SPI
1155	depends on BACKLIGHT_CLASS_DEVICE
1156	help
1157	  Say Y here if you want to enable support for the Sitronix
1158	  ST7789V controller for 240x320 LCD panels
1159
1160config DRM_PANEL_SONY_ACX565AKM
1161	tristate "Sony ACX565AKM panel"
1162	depends on GPIOLIB && OF && SPI
1163	depends on BACKLIGHT_CLASS_DEVICE
1164	help
1165	  Say Y here if you want to enable support for the Sony ACX565AKM
1166	  800x600 3.5" panel (found on the Nokia N900).
1167
1168config DRM_PANEL_SONY_TD4353_JDI
1169	tristate "Sony TD4353 JDI panel"
1170	depends on GPIOLIB && OF
1171	depends on DRM_MIPI_DSI
1172	depends on BACKLIGHT_CLASS_DEVICE
1173	help
1174	  Say Y here if you want to enable support for the Sony Tama
1175	  TD4353 JDI command mode panel as found on some Sony Xperia
1176	  XZ2 and XZ2 Compact smartphones.
1177
1178config DRM_PANEL_SONY_TULIP_TRULY_NT35521
1179	tristate "Sony Tulip Truly NT35521 panel"
1180	depends on GPIOLIB && OF
1181	depends on DRM_MIPI_DSI
1182	depends on BACKLIGHT_CLASS_DEVICE
1183	help
1184	  Say Y here if you want to enable support for the Sony Tulip
1185	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
1186	  Aqua phone.
1187
1188config DRM_PANEL_STARTEK_KD070FHFID015
1189	tristate "STARTEK KD070FHFID015 panel"
1190	depends on OF
1191	depends on DRM_MIPI_DSI
1192	depends on BACKLIGHT_CLASS_DEVICE
1193	help
1194	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
1195	  based on RENESAS-R69429 controller. The panel is a 7-inch TFT LCD display
1196	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
1197	  the host, a built-in LED backlight and touch controller.
1198
1199config DRM_PANEL_EDP
1200	tristate "support for simple Embedded DisplayPort panels"
1201	depends on OF
1202	depends on BACKLIGHT_CLASS_DEVICE
1203	depends on PM
1204	select VIDEOMODE_HELPERS
1205	select DRM_DISPLAY_DP_HELPER
1206	select DRM_DISPLAY_HELPER
1207	select DRM_DISPLAY_DP_AUX_BUS
1208	select DRM_KMS_HELPER
1209	help
1210	  DRM panel driver for dumb eDP panels that need at most a regulator and
1211	  a GPIO to be powered up. Optionally a backlight can be attached so
1212	  that it can be automatically turned off when the panel goes into a
1213	  low power state.
1214
1215config DRM_PANEL_SIMPLE
1216	tristate "support for simple panels (other than eDP ones)"
1217	depends on OF
1218	depends on BACKLIGHT_CLASS_DEVICE
1219	depends on PM
1220	select VIDEOMODE_HELPERS
1221	help
1222	  DRM panel driver for dumb non-eDP panels that need at most a regulator
1223	  and a GPIO to be powered up. Optionally a backlight can be attached so
1224	  that it can be automatically turned off when the panel goes into a
1225	  low power state.
1226
1227config DRM_PANEL_SUMMIT
1228	tristate "Apple Summit display panel"
1229	depends on OF
1230	depends on DRM_MIPI_DSI
1231	depends on BACKLIGHT_CLASS_DEVICE
1232	help
1233	  Say Y if you want to enable support for the "Summit" display panel
1234	  used as a touchbar on certain Apple laptops.
1235
1236config DRM_PANEL_SYNAPTICS_R63353
1237	tristate "Synaptics R63353-based panels"
1238	depends on OF
1239	depends on DRM_MIPI_DSI
1240	depends on BACKLIGHT_CLASS_DEVICE
1241	help
1242	  Say Y if you want to enable support for panels based on the
1243	  Synaptics R63353 controller.
1244
1245config DRM_PANEL_SYNAPTICS_TDDI
1246	tristate "Synaptics TDDI display panels"
1247	depends on OF
1248	depends on DRM_MIPI_DSI
1249	depends on BACKLIGHT_CLASS_DEVICE
1250	help
1251	  Say Y if you want to enable support for the Synaptics TDDI display
1252	  panels. There are multiple MIPI DSI panels manufactured under the TDDI
1253	  namesake, with varying resolutions and data lanes. They also have a
1254	  built-in LED backlight and a touch controller.
1255
1256config DRM_PANEL_TDO_TL070WSH30
1257	tristate "TDO TL070WSH30 DSI panel"
1258	depends on OF
1259	depends on DRM_MIPI_DSI
1260	depends on BACKLIGHT_CLASS_DEVICE
1261	help
1262	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1263	  panel module. The panel has a 1024×600 resolution and uses
1264	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1265	  the host, a built-in LED backlight and touch controller.
1266
1267config DRM_PANEL_TPO_TD028TTEC1
1268	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1269	depends on OF && SPI
1270	depends on BACKLIGHT_CLASS_DEVICE
1271	help
1272	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1273	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1274
1275config DRM_PANEL_TPO_TD043MTEA1
1276	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1277	depends on GPIOLIB && OF && REGULATOR && SPI
1278	help
1279	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1280	  4.3" panel (found on the OMAP3 Pandora board).
1281
1282config DRM_PANEL_TPO_TPG110
1283	tristate "TPO TPG 800x400 panel"
1284	depends on OF && SPI && GPIOLIB
1285	depends on BACKLIGHT_CLASS_DEVICE
1286	help
1287	  Say Y here if you want to enable support for TPO TPG110
1288	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1289	  800x400 LCD panels.
1290
1291config DRM_PANEL_TRULY_NT35597_WQXGA
1292	tristate "Truly WQXGA"
1293	depends on OF
1294	depends on DRM_MIPI_DSI
1295	help
1296	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1297	  Video Mode panel
1298
1299config DRM_PANEL_VISIONOX_G2647FB105
1300	tristate "Visionox G2647FB105"
1301	depends on OF
1302	depends on DRM_MIPI_DSI
1303	depends on BACKLIGHT_CLASS_DEVICE
1304	help
1305	  Say Y here if you want to enable support for the Visionox
1306	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1307
1308config DRM_PANEL_VISIONOX_R66451
1309	tristate "Visionox R66451"
1310	depends on OF
1311	depends on DRM_MIPI_DSI
1312	depends on BACKLIGHT_CLASS_DEVICE
1313	select DRM_DISPLAY_DSC_HELPER
1314	select DRM_DISPLAY_HELPER
1315	help
1316	  Say Y here if you want to enable support for Visionox
1317	  R66451 1080x2340 AMOLED DSI panel.
1318
1319config DRM_PANEL_VISIONOX_RM69299
1320	tristate "Visionox RM69299"
1321	depends on GPIOLIB
1322	depends on OF
1323	depends on DRM_MIPI_DSI
1324	depends on BACKLIGHT_CLASS_DEVICE
1325	help
1326	  Say Y here if you want to enable support for Visionox
1327	  RM69299  DSI Video Mode panel.
1328
1329config DRM_PANEL_VISIONOX_RM692E5
1330	tristate "Visionox RM692E5"
1331	depends on OF
1332	depends on DRM_MIPI_DSI
1333	depends on BACKLIGHT_CLASS_DEVICE
1334	select DRM_DISPLAY_DSC_HELPER
1335	select DRM_DISPLAY_HELPER
1336	help
1337	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1338	  display panels, such as the one found in the Nothing Phone (1)
1339	  smartphone.
1340
1341config DRM_PANEL_VISIONOX_VTDR6130
1342	tristate "Visionox VTDR6130"
1343	depends on OF
1344	depends on DRM_MIPI_DSI
1345	depends on BACKLIGHT_CLASS_DEVICE
1346	help
1347	  Say Y here if you want to enable support for Visionox
1348	  VTDR6130 1080x2400 AMOLED DSI panel.
1349
1350config DRM_PANEL_WIDECHIPS_WS2401
1351	tristate "Widechips WS2401 DPI panel driver"
1352	depends on SPI && GPIOLIB
1353	depends on BACKLIGHT_CLASS_DEVICE
1354	select DRM_MIPI_DBI
1355	help
1356	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1357	  480x800 display controller used in panels such as Samsung LMS380KF01.
1358	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1359
1360config DRM_PANEL_XINPENG_XPP055C272
1361	tristate "Xinpeng XPP055C272 panel driver"
1362	depends on OF
1363	depends on DRM_MIPI_DSI
1364	depends on BACKLIGHT_CLASS_DEVICE
1365	help
1366	  Say Y here if you want to enable support for the Xinpeng
1367	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1368	  system interfaces.
1369endmenu
1370