Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes from perf-tools.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.

Other changes are small fixes.

show more ...

Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs

Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw

core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy

rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()

atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check

buddy:
- fix free_trees memory leak
- prevent BUG_ON

bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support

panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS

dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats

dma-fence:
- add new helpers

dp:
- mst: avoid oob access with vcpi=0

hdmi:
- limit infoframes exposure to userspace

gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area

gpuvm:
- API sanitation for rust bindings

sched:
- introduce new helpers

panic:
- report invalid panic modes
- add kunit tests

i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes

xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error

i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL

amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes

amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework

radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters

msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming

nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list

nova:
- Align GEM object size to system page size

tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement

nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+

amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check

ast:
- support imported cursor buffers
- big endian fixes

etnaviv:
- add PPU flop reset support

imagination:
- add AM62P support
- introduce hw version checks

ivpu:
- implement warm boot flow

panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC

panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support

rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling

rz-du:
- RZ/V2H(P) MIPI-DSI Support

v3d:
- fix DMA segment size
- convert to new logging helpers

mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support

atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers

hisilicon:
- fix various DP bugs

renesas:
- fix kernel panic on reboot

exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context

vkms:
- add configfs support for display configuration

* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge branch 'v6.19-rc8'

Update to avoid conflicts with /urgent patches.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already have this
support for some SPI NOR devices.

Among the few spi-mem patches, they are needed for building the SPI NAND
changes (especially the ODTR introduction at the end) and therefore an
immutable tag will be needed for merging in the MTD tree (unless all the
series goes through MTD directly ofc).

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge tag 'v6.19-rc5' into drm-rust-next

We need the drm-rust fixes from -rc5 in here for nova-core to build on
top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Merge branch 'for-linus' into for-next

Pull 6.19-devel branch for applying cirrus scodec test patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc5

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Au

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc5

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with m

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with multiple PMICs where individual rails of each act
as required supplies for rails of the other (due to the latter being
e.g. always-on), and vice-versa.

Google Pixel 6 and 6 Pro (oriole and raven) are examples of such
designs.

Rather than returning -EPORBE_DEFER in regulator_register() when
set_machine_constraints() fails with -EPROBE_DEFER (due to missing
required supplies), we still allow rail registration and try to
reresolve supplies each time a new rail gets registered.

This is implemented using a bus (regulator bus), which allows the core
to reresolve supplies for regulators that still need them whenever new
regulators (i.e. devices) are added.

Using a bus also solves existing problems around late resolution of
supplies as mentioned in the commit message introducing that bus.

The series starts with a few bug fixes and the last two commits
implement the changes mentioned above, but do depend on the bug fixes.

show more ...

Merge tag 'v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 6.19-rc5

Pull in upstream shared GPIO fixes into the v7.0 branch.

Merge drm/drm-next into drm-xe-next

Bring some drm-scheduler patches to Xe.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related functions thanks to the usage of pm_ptr.

show more ...

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW con

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW configurations. This limitation prevents userspace and
upper-layer software from obtaining accurate bandwidth information,
which impacts traffic scheduling decisions.

This series addresses this by:

1. Adding mlx5 internal logic to calculate and propagate the effective
aggregated LAG speed to all attached vports. The vport speeds are
dynamically updated when LAG member link states change.

2. Extending RDMA core with a new ib_query_port_speed() verb and an
IB_EVENT_DEVICE_SPEED_CHANGE async event. These interfaces expose
the effective port speed to userspace, supporting speeds that are
not expressible as IB speed * width (where width is 2^n).

This series enables userspace applications to query the effective
port speed and receive notifications on speed changes in real-time.
In LAG configurations, each mlx5 port reports the aggregated bandwidth
of all active LAG members.

Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge tag 'v6.19-rc3' into driver-core-next

We need the driver-core fixes in here as well to build on top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Merge 6.19-rc3 into tty-next

We need the serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.19-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'drm-misc-next-2025-12-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.20:

Core Changes:

- dma-buf: Add tracepoints
- sched: Introduce new hel

Merge tag 'drm-misc-next-2025-12-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.20:

Core Changes:

- dma-buf: Add tracepoints
- sched: Introduce new helpers

Driver Changes:

- amdxdna: Enable hardware context priority, Remove (obsolete and
never public) NPU2 Support, Race condition fix
- rockchip: Add RK3368 HDMI Support
- rz-du: Add RZ/V2H(P) MIPI-DSI Support

- panels:
- st7571: Introduce SPI support
- New panels: Sitronix ST7920, Samsung LTL106HL02, LG LH546WF1-ED01, HannStar HSD156JUW2

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20251219-arcane-quaint-skunk-e383b0@houat

show more ...

SDCA Jack Fixups

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

Some fixups to the jack handling, adding some necessary hooks to connect
things with the machine driver. I have sp

SDCA Jack Fixups

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

Some fixups to the jack handling, adding some necessary hooks to connect
things with the machine driver. I have split these out from the system
suspend chain as that has been generating a fair amount of discussion
and getting these 3 merged is far more important to get basic
functionality working smoothly. I will do a spin of the system suspend
stuff soon, if either no new comments pop up, or we reach some consensus
on how to proceed.

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1

Cross-merge BPF and other fixes after downstream PR.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

gpu/drm: panel: add Samsung LTL106HL02 MIPI DSI panel driver

LTL106HL02 is a color active matrix TFT (Thin Film Transistor) liquid
crystal display (LCD) that uses amorphous silicon TFT as switching

gpu/drm: panel: add Samsung LTL106HL02 MIPI DSI panel driver

LTL106HL02 is a color active matrix TFT (Thin Film Transistor) liquid
crystal display (LCD) that uses amorphous silicon TFT as switching
devices. This model is composed of a TFT LCD panel, a driver circuit and a
backlight unit. The resolution of a 10.6" contains 1920 x 1080 pixels and
can display up to 16,8M color with wide viewing angle.

Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-8-clamor95@gmail.com

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge drm/drm-next into drm-intel-next

Backmerge to get the topic/drm-intel-plane-color-pipeline branch
contents.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>