xref: /linux/drivers/gpu/drm/panel/Kconfig (revision f6e8dc9edf963dbc99085e54f6ced6da9daa6100) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TD4320
71	tristate "BOE TD4320 DSI panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for BOE TD4320 1080x2340
77	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
78
79config DRM_PANEL_BOE_TH101MB31UIG002_28A
80	tristate "Boe TH101MB31UIG002-28A panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for Boe
86	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
87	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
88	  interface to the host and has a built-in LED backlight.
89
90config DRM_PANEL_BOE_TV101WUM_NL6
91	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
97	  45NA WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_BOE_TV101WUM_LL2
100	tristate "BOE TV101WUM LL2 1200x1920 panel"
101	depends on OF
102	depends on DRM_MIPI_DSI
103	depends on BACKLIGHT_CLASS_DEVICE
104	help
105	  Say Y here if you want to support for BOE TV101WUM-LL2
106	  WUXGA PANEL DSI Video Mode panel
107
108config DRM_PANEL_EBBG_FT8719
109	tristate "EBBG FT8719 panel driver"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y here if you want to enable support for the EBBG FT8719
115	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
116	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
117	  interface to the host.
118
119config DRM_PANEL_ELIDA_KD35T133
120	tristate "Elida KD35T133 panel driver"
121	depends on OF
122	depends on DRM_MIPI_DSI
123	depends on BACKLIGHT_CLASS_DEVICE
124	help
125	  Say Y here if you want to enable support for the Elida
126	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
127	  system interfaces.
128
129config DRM_PANEL_FEIXIN_K101_IM2BA02
130	tristate "Feixin K101 IM2BA02 panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
136	  4-lane 800x1280 MIPI DSI panel.
137
138config DRM_PANEL_FEIYANG_FY07024DI26A30D
139	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
140	depends on OF
141	depends on DRM_MIPI_DSI
142	depends on BACKLIGHT_CLASS_DEVICE
143	help
144	  Say Y if you want to enable support for panels based on the
145	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
146
147config DRM_PANEL_DSI_CM
148	tristate "Generic DSI command mode panels"
149	depends on OF
150	depends on DRM_MIPI_DSI
151	depends on BACKLIGHT_CLASS_DEVICE
152	help
153	  DRM panel driver for DSI command mode panels with support for
154	  embedded and external backlights.
155
156config DRM_PANEL_LVDS
157	tristate "Generic LVDS panel driver"
158	depends on OF
159	depends on BACKLIGHT_CLASS_DEVICE
160	select VIDEOMODE_HELPERS
161	help
162	  This driver supports LVDS panels that don't require device-specific
163	  handling of power supplies or control signals. It implements automatic
164	  backlight handling if the panel is attached to a backlight controller.
165
166config DRM_PANEL_HIMAX_HX8279
167	tristate "Himax HX8279-based panels"
168	depends on OF
169	depends on DRM_MIPI_DSI
170	depends on BACKLIGHT_CLASS_DEVICE
171	help
172	  Say Y if you want to enable support for panels based on the
173	  Himax HX8279 controller, such as the Startek KD070FHFID078
174	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
175	  and others.
176
177config DRM_PANEL_HIMAX_HX83102
178	tristate "Himax HX83102-based panels"
179	depends on OF
180	depends on DRM_MIPI_DSI
181	depends on BACKLIGHT_CLASS_DEVICE
182	help
183	  Say Y if you want to enable support for panels based on the
184	  Himax HX83102 controller.
185
186config DRM_PANEL_HIMAX_HX83112A
187	tristate "Himax HX83112A-based DSI panel"
188	depends on OF
189	depends on DRM_MIPI_DSI
190	depends on BACKLIGHT_CLASS_DEVICE
191	select DRM_KMS_HELPER
192	help
193	  Say Y here if you want to enable support for Himax HX83112A-based
194	  display panels, such as the one found in the Fairphone 4 smartphone.
195
196config DRM_PANEL_HIMAX_HX83112B
197	tristate "Himax HX83112B-based DSI panel"
198	depends on OF
199	depends on DRM_MIPI_DSI
200	depends on BACKLIGHT_CLASS_DEVICE
201	select DRM_KMS_HELPER
202	help
203	  Say Y here if you want to enable support for Himax HX83112B-based
204	  display panels, such as the one found in the Fairphone 3 smartphone.
205
206config DRM_PANEL_HIMAX_HX8394
207	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
208	depends on OF
209	depends on DRM_MIPI_DSI
210	depends on BACKLIGHT_CLASS_DEVICE
211	help
212	  Say Y if you want to enable support for panels based on the
213	  Himax HX8394 controller, such as the HannStar HSD060BHW4
214	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
215
216	  If M is selected the module will be called panel-himax-hx8394.
217
218config DRM_PANEL_HYDIS_HV101HD1
219	tristate "Hydis HV101HD1 panel"
220	depends on OF
221	depends on DRM_MIPI_DSI
222	depends on BACKLIGHT_CLASS_DEVICE
223	help
224	  Say Y here if you want to enable support for the Hydis HV101HD1
225	  2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT TF600T.
226	  HV101HD1 is a color active matrix TFT LCD module using amorphous
227	  silicon TFT's (Thin Film Transistors) as an active switching devices.
228
229	  If M is selected the module will be called panel-hydis-hv101hd1
230
231config DRM_PANEL_ILITEK_IL9322
232	tristate "Ilitek ILI9322 320x240 QVGA panels"
233	depends on OF && SPI
234	select REGMAP
235	help
236	  Say Y here if you want to enable support for Ilitek IL9322
237	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
238
239config DRM_PANEL_ILITEK_ILI9341
240	tristate "Ilitek ILI9341 240x320 QVGA panels"
241	depends on SPI
242	select DRM_KMS_HELPER
243	select DRM_GEM_DMA_HELPER
244	depends on BACKLIGHT_CLASS_DEVICE
245	select DRM_MIPI_DBI
246	help
247	  Say Y here if you want to enable support for Ilitek IL9341
248	  QVGA (240x320) RGB panels. support serial & parallel rgb
249	  interface.
250
251config DRM_PANEL_ILITEK_ILI9805
252	tristate "Ilitek ILI9805-based panels"
253	depends on OF
254	depends on DRM_MIPI_DSI
255	depends on BACKLIGHT_CLASS_DEVICE
256	help
257	  Say Y if you want to enable support for panels based on the
258	  Ilitek ILI9805 controller.
259
260config DRM_PANEL_ILITEK_ILI9806E
261	tristate "Ilitek ILI9806E-based panels"
262	depends on OF
263	depends on DRM_MIPI_DSI
264	depends on BACKLIGHT_CLASS_DEVICE
265	help
266	  Say Y if you want to enable support for panels based on the
267	  Ilitek ILI9806E controller.
268
269config DRM_PANEL_ILITEK_ILI9881C
270	tristate "Ilitek ILI9881C-based panels"
271	depends on OF
272	depends on DRM_MIPI_DSI
273	depends on BACKLIGHT_CLASS_DEVICE
274	help
275	  Say Y if you want to enable support for panels based on the
276	  Ilitek ILI9881c controller.
277
278config DRM_PANEL_ILITEK_ILI9882T
279	tristate "Ilitek ILI9882t-based panels"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y if you want to enable support for panels based on the
285	  Ilitek ILI9882t controller.
286
287config DRM_PANEL_INNOLUX_EJ030NA
288        tristate "Innolux EJ030NA 320x480 LCD panel"
289        depends on OF && SPI
290        select REGMAP_SPI
291        help
292          Say Y here to enable support for the Innolux/Chimei EJ030NA
293          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
294          and LDK handheld gaming consoles.
295
296config DRM_PANEL_INNOLUX_P079ZCA
297	tristate "Innolux P079ZCA panel"
298	depends on OF
299	depends on DRM_MIPI_DSI
300	depends on BACKLIGHT_CLASS_DEVICE
301	help
302	  Say Y here if you want to enable support for Innolux P079ZCA
303	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
304	  24 bit RGB per pixel. It provides a MIPI DSI interface to
305	  the host and has a built-in LED backlight.
306
307config DRM_PANEL_JADARD_JD9365DA_H3
308	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
309	depends on OF
310	depends on DRM_MIPI_DSI
311	depends on BACKLIGHT_CLASS_DEVICE
312	help
313	  Say Y here if you want to enable support for Jadard JD9365DA-H3
314	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
315	  800RGBx1280 dots at maximum.
316
317config DRM_PANEL_JDI_LPM102A188A
318	tristate "JDI LPM102A188A DSI panel"
319	depends on OF && GPIOLIB
320	depends on DRM_MIPI_DSI
321	depends on BACKLIGHT_CLASS_DEVICE
322	help
323	  Say Y here if you want to enable support for JDI LPM102A188A DSI
324	  command mode panel as found in Google Pixel C devices.
325	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
326	  to the host.
327
328config DRM_PANEL_JDI_LT070ME05000
329	tristate "JDI LT070ME05000 WUXGA DSI panel"
330	depends on OF
331	depends on DRM_MIPI_DSI
332	depends on BACKLIGHT_CLASS_DEVICE
333	help
334	  Say Y here if you want to enable support for JDI DSI video mode
335	  panel as found in Google Nexus 7 (2013) devices.
336	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
337	  24 bit per pixel.
338
339config DRM_PANEL_JDI_R63452
340	tristate "JDI R63452 Full HD DSI panel"
341	depends on OF
342	depends on DRM_MIPI_DSI
343	depends on BACKLIGHT_CLASS_DEVICE
344	help
345	  Say Y here if you want to enable support for the JDI R63452
346	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
347
348config DRM_PANEL_KHADAS_TS050
349	tristate "Khadas TS050 panel"
350	depends on OF
351	depends on DRM_MIPI_DSI
352	depends on BACKLIGHT_CLASS_DEVICE
353	help
354	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
355	  panel module. The panel has a 1080x1920 resolution and uses
356	  24 bit RGB per pixel. It provides a MIPI DSI interface to
357	  the host, a built-in LED backlight and touch controller.
358
359config DRM_PANEL_KINGDISPLAY_KD097D04
360	tristate "Kingdisplay kd097d04 panel"
361	depends on OF
362	depends on DRM_MIPI_DSI
363	depends on BACKLIGHT_CLASS_DEVICE
364	help
365	  Say Y here if you want to enable support for Kingdisplay kd097d04
366	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
367	  24 bit RGB per pixel. It provides a MIPI DSI interface to
368	  the host and has a built-in LED backlight.
369
370config DRM_PANEL_LEADTEK_LTK050H3146W
371	tristate "Leadtek LTK050H3146W panel"
372	depends on OF
373	depends on DRM_MIPI_DSI
374	depends on BACKLIGHT_CLASS_DEVICE
375	help
376	  Say Y here if you want to enable support for Leadtek LTK050H3146W
377	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
378	  24 bit RGB per pixel. It provides a MIPI DSI interface to
379	  the host and has a built-in LED backlight.
380
381config DRM_PANEL_LEADTEK_LTK500HD1829
382	tristate "Leadtek LTK500HD1829 panel"
383	depends on OF
384	depends on DRM_MIPI_DSI
385	depends on BACKLIGHT_CLASS_DEVICE
386	help
387	  Say Y here if you want to enable support for Kingdisplay kd097d04
388	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
389	  24 bit RGB per pixel. It provides a MIPI DSI interface to
390	  the host and has a built-in LED backlight.
391
392config DRM_PANEL_LINCOLNTECH_LCD197
393	tristate "Lincoln Technologies lcd197 panel"
394	depends on OF
395	depends on DRM_MIPI_DSI
396	depends on BACKLIGHT_CLASS_DEVICE
397	help
398	  Say Y here if you want to enable support for lincolntech lcd197
399	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
400	  24 bit RGB per pixel. It provides a MIPI DSI interface to
401	  the host.
402
403config DRM_PANEL_LG_LB035Q02
404	tristate "LG LB035Q024573 RGB panel"
405	depends on GPIOLIB && OF && SPI
406	help
407	  Say Y here if you want to enable support for the LB035Q02 RGB panel
408	  (found on the Gumstix Overo Palo35 board). To compile this driver as
409	  a module, choose M here.
410
411config DRM_PANEL_LG_LG4573
412	tristate "LG4573 RGB/SPI panel"
413	depends on OF && SPI
414	select VIDEOMODE_HELPERS
415	help
416	  Say Y here if you want to enable support for LG4573 RGB panel.
417	  To compile this driver as a module, choose M here.
418
419config DRM_PANEL_LG_SW43408
420	tristate "LG SW43408 panel"
421	depends on OF
422	depends on DRM_MIPI_DSI
423	depends on BACKLIGHT_CLASS_DEVICE
424	select DRM_DISPLAY_DSC_HELPER
425	select DRM_DISPLAY_HELPER
426	help
427	  Say Y here if you want to enable support for LG sw43408 panel.
428	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
429	  pixel. It provides a MIPI DSI interface to the host and has a
430	  built-in LED backlight.
431
432config DRM_PANEL_MAGNACHIP_D53E6EA8966
433	tristate "Magnachip D53E6EA8966 DSI panel"
434	depends on OF && SPI
435	depends on DRM_MIPI_DSI
436	depends on BACKLIGHT_CLASS_DEVICE
437	select DRM_MIPI_DBI
438	help
439	  DRM panel driver for the Samsung AMS495QA01 panel controlled
440	  with the Magnachip D53E6EA8966 panel IC. This panel receives
441	  video data via DSI but commands via 9-bit SPI using DBI.
442
443config DRM_PANEL_MANTIX_MLAF057WE51
444	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
445	depends on OF
446	depends on DRM_MIPI_DSI
447	depends on BACKLIGHT_CLASS_DEVICE
448	help
449	  Say Y here if you want to enable support for the Mantix
450	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
451	  has a resolution of 720x1440 pixels, a built in backlight and touch
452	  controller.
453
454config DRM_PANEL_NEC_NL8048HL11
455	tristate "NEC NL8048HL11 RGB panel"
456	depends on GPIOLIB && OF && SPI
457	help
458	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
459	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
460	  as a module, choose M here.
461
462config DRM_PANEL_NEWVISION_NV3051D
463	tristate "NewVision NV3051D DSI panel"
464	depends on OF
465	depends on DRM_MIPI_DSI
466	depends on BACKLIGHT_CLASS_DEVICE
467	help
468	  This driver supports the NV3051D based panel found on the Anbernic
469	  RG353P and RG353V.
470
471config DRM_PANEL_NEWVISION_NV3052C
472	tristate "NewVision NV3052C RGB/SPI panel"
473	depends on OF && SPI
474	depends on BACKLIGHT_CLASS_DEVICE
475	select DRM_MIPI_DBI
476	help
477	  Say Y here if you want to enable support for the panels built
478	  around the NewVision NV3052C display controller.
479
480config DRM_PANEL_NOVATEK_NT35510
481	tristate "Novatek NT35510 RGB panel driver"
482	depends on OF
483	depends on DRM_MIPI_DSI
484	depends on BACKLIGHT_CLASS_DEVICE
485	help
486	  Say Y here if you want to enable support for the panels built
487	  around the Novatek NT35510 display controller, such as some
488	  Hydis panels.
489
490config DRM_PANEL_NOVATEK_NT35560
491	tristate "Novatek NT35560 DSI command mode panel"
492	depends on OF
493	depends on DRM_MIPI_DSI
494	depends on BACKLIGHT_CLASS_DEVICE
495	select VIDEOMODE_HELPERS
496	help
497	  Say Y here if you want to enable the Novatek NT35560 display
498	  controller. This panel supports DSI in both command and video
499	  mode. This supports several panels such as Sony ACX424AKM and
500	  ACX424AKP.
501
502config DRM_PANEL_NOVATEK_NT35950
503	tristate "Novatek NT35950 DSI panel"
504	depends on OF
505	depends on DRM_MIPI_DSI
506	depends on BACKLIGHT_CLASS_DEVICE
507	help
508	  Say Y here if you want to enable support for the panels built
509	  around the Novatek NT35950 display controller, such as some
510	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
511	  mobile phones.
512
513config DRM_PANEL_NOVATEK_NT36523
514	tristate "Novatek NT36523 panel driver"
515	depends on OF
516	depends on DRM_MIPI_DSI
517	depends on BACKLIGHT_CLASS_DEVICE
518	help
519	  Say Y here if you want to enable support for the panels built
520	  around the Novatek NT36523 display controller, such as some
521	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
522
523config DRM_PANEL_NOVATEK_NT36672A
524	tristate "Novatek NT36672A DSI panel"
525	depends on OF
526	depends on DRM_MIPI_DSI
527	depends on BACKLIGHT_CLASS_DEVICE
528	help
529	  Say Y here if you want to enable support for the panels built
530	  around the Novatek NT36672A display controller, such as some
531	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
532
533config DRM_PANEL_NOVATEK_NT36672E
534	tristate "Novatek NT36672E DSI panel"
535	depends on OF
536	depends on DRM_MIPI_DSI
537	depends on BACKLIGHT_CLASS_DEVICE
538	help
539	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
540	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
541	  RGB per pixel.
542
543config DRM_PANEL_NOVATEK_NT37801
544	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
545	depends on OF
546	depends on DRM_MIPI_DSI
547	depends on BACKLIGHT_CLASS_DEVICE
548	select DRM_DISPLAY_DSC_HELPER
549	select DRM_DISPLAY_HELPER
550	help
551	  Say Y here if you want to enable support for Novatek NT37801 (or
552	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
553	  resolution.
554
555config DRM_PANEL_NOVATEK_NT39016
556	tristate "Novatek NT39016 RGB/SPI panel"
557	depends on OF && SPI
558	depends on BACKLIGHT_CLASS_DEVICE
559	select REGMAP_SPI
560	help
561	  Say Y here if you want to enable support for the panels built
562	  around the Novatek NT39016 display controller.
563
564config DRM_PANEL_OLIMEX_LCD_OLINUXINO
565	tristate "Olimex LCD-OLinuXino panel"
566	depends on OF
567	depends on I2C
568	depends on BACKLIGHT_CLASS_DEVICE
569	select CRC32
570	help
571	  The panel is used with different sizes LCDs, from 480x272 to
572	  1280x800, and 24 bit per pixel.
573
574	  Say Y here if you want to enable support for Olimex Ltd.
575	  LCD-OLinuXino panel.
576
577config DRM_PANEL_ORISETECH_OTA5601A
578        tristate "Orise Technology ota5601a RGB/SPI panel"
579        depends on SPI
580        depends on BACKLIGHT_CLASS_DEVICE
581        select REGMAP_SPI
582        help
583          Say Y here if you want to enable support for the panels built
584          around the Orise Technology OTA9601A display controller.
585
586config DRM_PANEL_ORISETECH_OTM8009A
587	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
588	depends on OF
589	depends on DRM_MIPI_DSI
590	depends on BACKLIGHT_CLASS_DEVICE
591	help
592	  Say Y here if you want to enable support for Orise Technology
593	  otm8009a 480x800 dsi 2dl panel.
594
595config DRM_PANEL_OSD_OSD101T2587_53TS
596	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
597	depends on OF
598	depends on DRM_MIPI_DSI
599	depends on BACKLIGHT_CLASS_DEVICE
600	help
601	  Say Y here if you want to enable support for One Stop Displays
602	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
603
604config DRM_PANEL_PANASONIC_VVX10F034N00
605	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
606	depends on OF
607	depends on DRM_MIPI_DSI
608	depends on BACKLIGHT_CLASS_DEVICE
609	help
610	  Say Y here if you want to enable support for Panasonic VVX10F034N00
611	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
612	  Xperia Z2 tablets
613
614config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
615	tristate "Raspberry Pi 7-inch touchscreen panel"
616	depends on DRM_MIPI_DSI
617	help
618	  Say Y here if you want to enable support for the Raspberry
619	  Pi 7" Touchscreen.  To compile this driver as a module,
620	  choose M here.
621
622config DRM_PANEL_RAYDIUM_RM67191
623	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
624	depends on OF
625	depends on DRM_MIPI_DSI
626	depends on BACKLIGHT_CLASS_DEVICE
627	help
628	  Say Y here if you want to enable support for Raydium RM67191 FHD
629	  (1080x1920) DSI panel.
630
631config DRM_PANEL_RAYDIUM_RM67200
632	tristate "Raydium RM67200-based DSI panel"
633	depends on OF
634	depends on DRM_MIPI_DSI
635	help
636	  Say Y here if you want to enable support for Raydium RM67200-based
637	  DSI video mode panels. This panel controller can be found in the
638	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
639	  evaluation boards.
640
641config DRM_PANEL_RAYDIUM_RM68200
642	tristate "Raydium RM68200 720x1280 DSI video mode panel"
643	depends on OF
644	depends on DRM_MIPI_DSI
645	depends on BACKLIGHT_CLASS_DEVICE
646	help
647	  Say Y here if you want to enable support for Raydium RM68200
648	  720x1280 DSI video mode panel.
649
650config DRM_PANEL_RAYDIUM_RM692E5
651	tristate "Raydium RM692E5-based DSI panel"
652	depends on OF
653	depends on DRM_MIPI_DSI
654	depends on BACKLIGHT_CLASS_DEVICE
655	select DRM_DISPLAY_DSC_HELPER
656	select DRM_DISPLAY_HELPER
657	help
658	  Say Y here if you want to enable support for Raydium RM692E5-based
659	  display panels, such as the one found in the Fairphone 5 smartphone.
660
661config DRM_PANEL_RAYDIUM_RM69380
662	tristate "Raydium RM69380-based DSI panel"
663	depends on OF && GPIOLIB
664	depends on DRM_MIPI_DSI
665	depends on BACKLIGHT_CLASS_DEVICE
666	help
667	  Say Y here if you want to enable support for Raydium RM69380-based
668	  display panels.
669
670	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
671	  in combination with an EDO OLED panel.
672
673config DRM_PANEL_RENESAS_R61307
674	tristate "Renesas R61307 DSI video mode panel"
675	depends on OF
676	depends on DRM_MIPI_DSI
677	depends on BACKLIGHT_CLASS_DEVICE
678	help
679	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
680	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
681	  resolution and uses 24 bit RGB per pixel.
682
683	  This panel controller can be found in LG Optimus Vu P895 smartphone
684	  in combination with LCD panel.
685
686config DRM_PANEL_RENESAS_R69328
687	tristate "Renesas R69328 720x1280 DSI video mode panel"
688	depends on OF
689	depends on DRM_MIPI_DSI
690	depends on BACKLIGHT_CLASS_DEVICE
691	help
692	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
693	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
694	  resolution and uses 24 bit RGB per pixel.
695
696	  This panel controller can be found in LG Optimus 4X P895 smartphone
697	  in combination with LCD panel.
698
699config DRM_PANEL_RONBO_RB070D30
700	tristate "Ronbo Electronics RB070D30 panel"
701	depends on OF
702	depends on DRM_MIPI_DSI
703	depends on BACKLIGHT_CLASS_DEVICE
704	help
705	  Say Y here if you want to enable support for Ronbo Electronics
706	  RB070D30 1024x600 DSI panel.
707
708config DRM_PANEL_SAMSUNG_AMS581VF01
709	tristate "Samsung AMS581VF01 panel"
710	depends on OF
711	depends on DRM_MIPI_DSI
712	depends on BACKLIGHT_CLASS_DEVICE
713	help
714	  Say Y or M here if you want to enable support for the
715	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
716
717config DRM_PANEL_SAMSUNG_AMS639RQ08
718	tristate "Samsung AMS639RQ08 panel"
719	depends on OF
720	depends on DRM_MIPI_DSI
721	depends on BACKLIGHT_CLASS_DEVICE
722	help
723	  Say Y or M here if you want to enable support for the
724	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
725
726config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
727	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
728	depends on GPIOLIB && OF && REGULATOR
729	depends on DRM_MIPI_DSI
730	depends on BACKLIGHT_CLASS_DEVICE
731	help
732	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
733	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
734	  GT-I9195I). To compile this driver as a module, choose M here.
735
736config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
737	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
738	depends on OF
739	select DRM_MIPI_DSI
740	select VIDEOMODE_HELPERS
741
742config DRM_PANEL_SAMSUNG_ATNA33XC20
743	tristate "Samsung ATNA33XC20 eDP panel"
744	depends on OF
745	depends on BACKLIGHT_CLASS_DEVICE
746	depends on PM
747	select DRM_DISPLAY_DP_HELPER
748	select DRM_DISPLAY_HELPER
749	select DRM_DISPLAY_DP_AUX_BUS
750	help
751	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
752	  be handled by the DRM_PANEL_SIMPLE driver because its power
753	  sequencing is non-standard.
754
755config DRM_PANEL_SAMSUNG_DB7430
756	tristate "Samsung DB7430-based DPI panels"
757	depends on OF && SPI && GPIOLIB
758	depends on BACKLIGHT_CLASS_DEVICE
759	select DRM_MIPI_DBI
760	help
761	  Say Y here if you want to enable support for the Samsung
762	  DB7430 DPI display controller used in such devices as the
763	  LMS397KF04 480x800 DPI panel.
764
765config DRM_PANEL_SAMSUNG_LD9040
766	tristate "Samsung LD9040 RGB/SPI panel"
767	depends on OF && SPI
768	depends on BACKLIGHT_CLASS_DEVICE
769	select VIDEOMODE_HELPERS
770
771config DRM_PANEL_SAMSUNG_S6E3FA7
772	tristate "Samsung S6E3FA7 panel driver"
773	depends on OF
774	depends on DRM_MIPI_DSI
775	depends on BACKLIGHT_CLASS_DEVICE
776	help
777	  Say Y here if you want to enable support for the Samsung S6E3FA7
778	  1920x2220 panel.
779
780config DRM_PANEL_SAMSUNG_S6D16D0
781	tristate "Samsung S6D16D0 DSI video mode panel"
782	depends on OF
783	depends on DRM_MIPI_DSI
784	select VIDEOMODE_HELPERS
785
786config DRM_PANEL_SAMSUNG_S6D27A1
787	tristate "Samsung S6D27A1 DPI panel driver"
788	depends on OF && SPI && GPIOLIB
789	select DRM_MIPI_DBI
790	help
791	  Say Y here if you want to enable support for the Samsung
792	  S6D27A1 DPI 480x800 panel.
793
794	  This panel can be found in Samsung Galaxy Ace 2
795	  GT-I8160 mobile phone.
796
797config DRM_PANEL_SAMSUNG_S6D7AA0
798	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
799	depends on OF
800	depends on BACKLIGHT_CLASS_DEVICE
801	select DRM_MIPI_DSI
802	select VIDEOMODE_HELPERS
803
804config DRM_PANEL_SAMSUNG_S6E3FC2X01
805	tristate "Samsung S6E3FC2X01 DSI panel controller"
806	depends on OF
807	depends on DRM_MIPI_DSI
808	depends on BACKLIGHT_CLASS_DEVICE
809	select VIDEOMODE_HELPERS
810	help
811	  Say Y or M here if you want to enable support for the
812	  Samsung S6E3FC2 DDIC and connected MIPI DSI panel.
813	  Currently supported panels:
814
815	    Samsung AMS641RW (found in the OnePlus 6T smartphone)
816
817config DRM_PANEL_SAMSUNG_S6E3HA2
818	tristate "Samsung S6E3HA2 DSI video mode panel"
819	depends on OF
820	depends on DRM_MIPI_DSI
821	depends on BACKLIGHT_CLASS_DEVICE
822	select VIDEOMODE_HELPERS
823
824config DRM_PANEL_SAMSUNG_S6E3HA8
825	tristate "Samsung S6E3HA8 DSI video mode panel"
826	depends on OF
827	depends on DRM_MIPI_DSI
828	depends on BACKLIGHT_CLASS_DEVICE
829	select DRM_DISPLAY_DSC_HELPER
830	select VIDEOMODE_HELPERS
831
832config DRM_PANEL_SAMSUNG_S6E63J0X03
833	tristate "Samsung S6E63J0X03 DSI command mode panel"
834	depends on OF
835	depends on DRM_MIPI_DSI
836	depends on BACKLIGHT_CLASS_DEVICE
837	select VIDEOMODE_HELPERS
838
839config DRM_PANEL_SAMSUNG_S6E63M0
840	tristate "Samsung S6E63M0 RGB panel"
841	depends on OF
842	depends on BACKLIGHT_CLASS_DEVICE
843	help
844	  Say Y here if you want to enable support for Samsung S6E63M0
845	  AMOLED LCD panel. This panel can be accessed using SPI or
846	  DSI.
847
848config DRM_PANEL_SAMSUNG_S6E63M0_SPI
849	tristate "Samsung S6E63M0 RGB SPI interface"
850	depends on SPI
851	depends on DRM_PANEL_SAMSUNG_S6E63M0
852	default DRM_PANEL_SAMSUNG_S6E63M0
853	select DRM_MIPI_DBI
854	help
855	  Say Y here if you want to be able to access the Samsung
856	  S6E63M0 panel using SPI.
857
858config DRM_PANEL_SAMSUNG_S6E63M0_DSI
859	tristate "Samsung S6E63M0 RGB DSI interface"
860	depends on DRM_MIPI_DSI
861	depends on DRM_PANEL_SAMSUNG_S6E63M0
862	help
863	  Say Y here if you want to be able to access the Samsung
864	  S6E63M0 panel using DSI.
865
866config DRM_PANEL_SAMSUNG_S6E8AA0
867	tristate "Samsung S6E8AA0 DSI video mode panel"
868	depends on OF
869	select DRM_MIPI_DSI
870	select VIDEOMODE_HELPERS
871
872config DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01
873	tristate "Samsung AMS561RA01 panel with S6E8AA5X01 controller"
874	depends on GPIOLIB && OF && REGULATOR
875	depends on DRM_MIPI_DSI
876	depends on BACKLIGHT_CLASS_DEVICE
877	help
878	  Say Y here if you want to enable support for Samsung AMS561RA01
879	  panel, which uses Samsung's S6E8AA5X01 controller. The panel has a
880	  ~5.6 inch AMOLED display, and the controller is driven by the MIPI
881	  DSI protocol with 4 lanes.
882
883config DRM_PANEL_SAMSUNG_SOFEF00
884	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
885	depends on OF
886	depends on DRM_MIPI_DSI
887	depends on BACKLIGHT_CLASS_DEVICE
888	select VIDEOMODE_HELPERS
889	help
890	  Say Y or M here if you want to enable support for the Samsung AMOLED
891	  command mode panels found in the OnePlus 6/6T smartphones.
892
893	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
894
895config DRM_PANEL_SEIKO_43WVF1G
896	tristate "Seiko 43WVF1G panel"
897	depends on OF
898	depends on BACKLIGHT_CLASS_DEVICE
899	select VIDEOMODE_HELPERS
900	help
901	  Say Y here if you want to enable support for the Seiko
902	  43WVF1G controller for 800x480 LCD panels
903
904config DRM_PANEL_SHARP_LQ079L1SX01
905	tristate "Sharp LQ079L1SX01 panel"
906	depends on OF
907	depends on DRM_MIPI_DSI
908	depends on BACKLIGHT_CLASS_DEVICE
909	select VIDEOMODE_HELPERS
910	help
911	  Say Y here if you want to enable support for Sharp LQ079L1SX01
912	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
913	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
914	  the host.
915
916	  To compile this driver as a module, choose M here: the module
917	  will be called panel-sharp-lq079l1sx01.
918
919config DRM_PANEL_SHARP_LQ101R1SX01
920	tristate "Sharp LQ101R1SX01 panel"
921	depends on OF
922	depends on DRM_MIPI_DSI
923	depends on BACKLIGHT_CLASS_DEVICE
924	help
925	  Say Y here if you want to enable support for Sharp LQ101R1SX01
926	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
927	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
928	  the host and has a built-in LED backlight.
929
930	  To compile this driver as a module, choose M here: the module
931	  will be called panel-sharp-lq101r1sx01.
932
933config DRM_PANEL_SHARP_LS037V7DW01
934	tristate "Sharp LS037V7DW01 VGA LCD panel"
935	depends on GPIOLIB && OF && REGULATOR
936	help
937	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
938	  (480x640) LCD panel (found on the TI SDP3430 board).
939
940config DRM_PANEL_SHARP_LS043T1LE01
941	tristate "Sharp LS043T1LE01 qHD video mode panel"
942	depends on OF
943	depends on DRM_MIPI_DSI
944	depends on BACKLIGHT_CLASS_DEVICE
945	help
946	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
947	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
948
949config DRM_PANEL_SHARP_LS060T1SX01
950	tristate "Sharp LS060T1SX01 FullHD video mode panel"
951	depends on OF
952	depends on DRM_MIPI_DSI
953	depends on BACKLIGHT_CLASS_DEVICE
954	help
955	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
956	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
957	  Bundle.
958
959config DRM_PANEL_SITRONIX_ST7701
960	tristate "Sitronix ST7701 panel driver"
961	depends on OF
962	depends on SPI || DRM_MIPI_DSI
963	select DRM_MIPI_DBI if SPI
964	depends on BACKLIGHT_CLASS_DEVICE
965	help
966	  Say Y here if you want to enable support for the Sitronix
967	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
968	  system interfaces.
969
970config DRM_PANEL_SITRONIX_ST7703
971	tristate "Sitronix ST7703 based MIPI touchscreen panels"
972	depends on OF
973	depends on DRM_MIPI_DSI
974	depends on BACKLIGHT_CLASS_DEVICE
975	help
976	  Say Y here if you want to enable support for Sitronix ST7703 based
977	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
978	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
979	  in backlight and touch controller.
980	  Touch input support is provided by the goodix driver and needs to be
981	  selected separately.
982
983config DRM_PANEL_SITRONIX_ST7789V
984	tristate "Sitronix ST7789V panel"
985	depends on OF && SPI
986	depends on BACKLIGHT_CLASS_DEVICE
987	help
988	  Say Y here if you want to enable support for the Sitronix
989	  ST7789V controller for 240x320 LCD panels
990
991config DRM_PANEL_SONY_ACX565AKM
992	tristate "Sony ACX565AKM panel"
993	depends on GPIOLIB && OF && SPI
994	depends on BACKLIGHT_CLASS_DEVICE
995	help
996	  Say Y here if you want to enable support for the Sony ACX565AKM
997	  800x600 3.5" panel (found on the Nokia N900).
998
999config DRM_PANEL_SONY_TD4353_JDI
1000	tristate "Sony TD4353 JDI panel"
1001	depends on GPIOLIB && OF
1002	depends on DRM_MIPI_DSI
1003	depends on BACKLIGHT_CLASS_DEVICE
1004	help
1005	  Say Y here if you want to enable support for the Sony Tama
1006	  TD4353 JDI command mode panel as found on some Sony Xperia
1007	  XZ2 and XZ2 Compact smartphones.
1008
1009config DRM_PANEL_SONY_TULIP_TRULY_NT35521
1010	tristate "Sony Tulip Truly NT35521 panel"
1011	depends on GPIOLIB && OF
1012	depends on DRM_MIPI_DSI
1013	depends on BACKLIGHT_CLASS_DEVICE
1014	help
1015	  Say Y here if you want to enable support for the Sony Tulip
1016	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
1017	  Aqua phone.
1018
1019config DRM_PANEL_STARTEK_KD070FHFID015
1020	tristate "STARTEK KD070FHFID015 panel"
1021	depends on OF
1022	depends on DRM_MIPI_DSI
1023	depends on BACKLIGHT_CLASS_DEVICE
1024	help
1025	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
1026	  based on RENESAS-R69429 controller. The panel is a 7-inch TFT LCD display
1027	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
1028	  the host, a built-in LED backlight and touch controller.
1029
1030config DRM_PANEL_EDP
1031	tristate "support for simple Embedded DisplayPort panels"
1032	depends on OF
1033	depends on BACKLIGHT_CLASS_DEVICE
1034	depends on PM
1035	select VIDEOMODE_HELPERS
1036	select DRM_DISPLAY_DP_HELPER
1037	select DRM_DISPLAY_HELPER
1038	select DRM_DISPLAY_DP_AUX_BUS
1039	select DRM_KMS_HELPER
1040	help
1041	  DRM panel driver for dumb eDP panels that need at most a regulator and
1042	  a GPIO to be powered up. Optionally a backlight can be attached so
1043	  that it can be automatically turned off when the panel goes into a
1044	  low power state.
1045
1046config DRM_PANEL_SIMPLE
1047	tristate "support for simple panels (other than eDP ones)"
1048	depends on OF
1049	depends on BACKLIGHT_CLASS_DEVICE
1050	depends on PM
1051	select VIDEOMODE_HELPERS
1052	help
1053	  DRM panel driver for dumb non-eDP panels that need at most a regulator
1054	  and a GPIO to be powered up. Optionally a backlight can be attached so
1055	  that it can be automatically turned off when the panel goes into a
1056	  low power state.
1057
1058config DRM_PANEL_SUMMIT
1059	tristate "Apple Summit display panel"
1060	depends on OF
1061	depends on DRM_MIPI_DSI
1062	depends on BACKLIGHT_CLASS_DEVICE
1063	help
1064	  Say Y if you want to enable support for the "Summit" display panel
1065	  used as a touchbar on certain Apple laptops.
1066
1067config DRM_PANEL_SYNAPTICS_R63353
1068	tristate "Synaptics R63353-based panels"
1069	depends on OF
1070	depends on DRM_MIPI_DSI
1071	depends on BACKLIGHT_CLASS_DEVICE
1072	help
1073	  Say Y if you want to enable support for panels based on the
1074	  Synaptics R63353 controller.
1075
1076config DRM_PANEL_SYNAPTICS_TDDI
1077	tristate "Synaptics TDDI display panels"
1078	depends on OF
1079	depends on DRM_MIPI_DSI
1080	depends on BACKLIGHT_CLASS_DEVICE
1081	help
1082	  Say Y if you want to enable support for the Synaptics TDDI display
1083	  panels. There are multiple MIPI DSI panels manufactured under the TDDI
1084	  namesake, with varying resolutions and data lanes. They also have a
1085	  built-in LED backlight and a touch controller.
1086
1087config DRM_PANEL_TDO_TL070WSH30
1088	tristate "TDO TL070WSH30 DSI panel"
1089	depends on OF
1090	depends on DRM_MIPI_DSI
1091	depends on BACKLIGHT_CLASS_DEVICE
1092	help
1093	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1094	  panel module. The panel has a 1024×600 resolution and uses
1095	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1096	  the host, a built-in LED backlight and touch controller.
1097
1098config DRM_PANEL_TPO_TD028TTEC1
1099	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1100	depends on OF && SPI
1101	depends on BACKLIGHT_CLASS_DEVICE
1102	help
1103	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1104	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1105
1106config DRM_PANEL_TPO_TD043MTEA1
1107	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1108	depends on GPIOLIB && OF && REGULATOR && SPI
1109	help
1110	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1111	  4.3" panel (found on the OMAP3 Pandora board).
1112
1113config DRM_PANEL_TPO_TPG110
1114	tristate "TPO TPG 800x400 panel"
1115	depends on OF && SPI && GPIOLIB
1116	depends on BACKLIGHT_CLASS_DEVICE
1117	help
1118	  Say Y here if you want to enable support for TPO TPG110
1119	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1120	  800x400 LCD panels.
1121
1122config DRM_PANEL_TRULY_NT35597_WQXGA
1123	tristate "Truly WQXGA"
1124	depends on OF
1125	depends on DRM_MIPI_DSI
1126	help
1127	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1128	  Video Mode panel
1129
1130config DRM_PANEL_VISIONOX_G2647FB105
1131	tristate "Visionox G2647FB105"
1132	depends on OF
1133	depends on DRM_MIPI_DSI
1134	depends on BACKLIGHT_CLASS_DEVICE
1135	help
1136	  Say Y here if you want to enable support for the Visionox
1137	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1138
1139config DRM_PANEL_VISIONOX_R66451
1140	tristate "Visionox R66451"
1141	depends on OF
1142	depends on DRM_MIPI_DSI
1143	depends on BACKLIGHT_CLASS_DEVICE
1144	select DRM_DISPLAY_DSC_HELPER
1145	select DRM_DISPLAY_HELPER
1146	help
1147	  Say Y here if you want to enable support for Visionox
1148	  R66451 1080x2340 AMOLED DSI panel.
1149
1150config DRM_PANEL_VISIONOX_RM69299
1151	tristate "Visionox RM69299"
1152	depends on OF
1153	depends on DRM_MIPI_DSI
1154	help
1155	  Say Y here if you want to enable support for Visionox
1156	  RM69299  DSI Video Mode panel.
1157
1158config DRM_PANEL_VISIONOX_RM692E5
1159	tristate "Visionox RM692E5"
1160	depends on OF
1161	depends on DRM_MIPI_DSI
1162	depends on BACKLIGHT_CLASS_DEVICE
1163	select DRM_DISPLAY_DSC_HELPER
1164	select DRM_DISPLAY_HELPER
1165	help
1166	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1167	  display panels, such as the one found in the Nothing Phone (1)
1168	  smartphone.
1169
1170config DRM_PANEL_VISIONOX_VTDR6130
1171	tristate "Visionox VTDR6130"
1172	depends on OF
1173	depends on DRM_MIPI_DSI
1174	depends on BACKLIGHT_CLASS_DEVICE
1175	help
1176	  Say Y here if you want to enable support for Visionox
1177	  VTDR6130 1080x2400 AMOLED DSI panel.
1178
1179config DRM_PANEL_WIDECHIPS_WS2401
1180	tristate "Widechips WS2401 DPI panel driver"
1181	depends on SPI && GPIOLIB
1182	depends on BACKLIGHT_CLASS_DEVICE
1183	select DRM_MIPI_DBI
1184	help
1185	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1186	  480x800 display controller used in panels such as Samsung LMS380KF01.
1187	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1188
1189config DRM_PANEL_XINPENG_XPP055C272
1190	tristate "Xinpeng XPP055C272 panel driver"
1191	depends on OF
1192	depends on DRM_MIPI_DSI
1193	depends on BACKLIGHT_CLASS_DEVICE
1194	help
1195	  Say Y here if you want to enable support for the Xinpeng
1196	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1197	  system interfaces.
1198endmenu
1199