xref: /linux/drivers/gpu/drm/panel/Kconfig (revision ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_LVDS
22	tristate "Generic LVDS panel driver"
23	depends on OF
24	depends on BACKLIGHT_CLASS_DEVICE
25	select VIDEOMODE_HELPERS
26	help
27	  This driver supports LVDS panels that don't require device-specific
28	  handling of power supplies or control signals. It implements automatic
29	  backlight handling if the panel is attached to a backlight controller.
30
31config DRM_PANEL_SIMPLE
32	tristate "support for simple panels"
33	depends on OF
34	depends on BACKLIGHT_CLASS_DEVICE
35	select VIDEOMODE_HELPERS
36	help
37	  DRM panel driver for dumb panels that need at most a regulator and
38	  a GPIO to be powered up. Optionally a backlight can be attached so
39	  that it can be automatically turned off when the panel goes into a
40	  low power state.
41
42config DRM_PANEL_FEIYANG_FY07024DI26A30D
43	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
44	depends on OF
45	depends on DRM_MIPI_DSI
46	depends on BACKLIGHT_CLASS_DEVICE
47	help
48	  Say Y if you want to enable support for panels based on the
49	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
50
51config DRM_PANEL_ILITEK_IL9322
52	tristate "Ilitek ILI9322 320x240 QVGA panels"
53	depends on OF && SPI
54	select REGMAP
55	help
56	  Say Y here if you want to enable support for Ilitek IL9322
57	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
58
59config DRM_PANEL_ILITEK_ILI9881C
60	tristate "Ilitek ILI9881C-based panels"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y if you want to enable support for panels based on the
66	  Ilitek ILI9881c controller.
67
68config DRM_PANEL_INNOLUX_P079ZCA
69	tristate "Innolux P079ZCA panel"
70	depends on OF
71	depends on DRM_MIPI_DSI
72	depends on BACKLIGHT_CLASS_DEVICE
73	help
74	  Say Y here if you want to enable support for Innolux P079ZCA
75	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
76	  24 bit RGB per pixel. It provides a MIPI DSI interface to
77	  the host and has a built-in LED backlight.
78
79config DRM_PANEL_JDI_LT070ME05000
80	tristate "JDI LT070ME05000 WUXGA DSI panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for JDI DSI video mode
86	  panel as found in Google Nexus 7 (2013) devices.
87	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
88	  24 bit per pixel.
89
90config DRM_PANEL_KINGDISPLAY_KD097D04
91	tristate "Kingdisplay kd097d04 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to enable support for Kingdisplay kd097d04
97	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
98	  24 bit RGB per pixel. It provides a MIPI DSI interface to
99	  the host and has a built-in LED backlight.
100
101config DRM_PANEL_SAMSUNG_LD9040
102	tristate "Samsung LD9040 RGB/SPI panel"
103	depends on OF && SPI
104	select VIDEOMODE_HELPERS
105
106config DRM_PANEL_LG_LG4573
107	tristate "LG4573 RGB/SPI panel"
108	depends on OF && SPI
109	select VIDEOMODE_HELPERS
110	help
111	  Say Y here if you want to enable support for LG4573 RGB panel.
112	  To compile this driver as a module, choose M here.
113
114config DRM_PANEL_OLIMEX_LCD_OLINUXINO
115	tristate "Olimex LCD-OLinuXino panel"
116	depends on OF
117	depends on I2C
118	depends on BACKLIGHT_CLASS_DEVICE
119	help
120	  The panel is used with different sizes LCDs, from 480x272 to
121	  1280x800, and 24 bit per pixel.
122
123	  Say Y here if you want to enable support for Olimex Ltd.
124	  LCD-OLinuXino panel.
125
126config DRM_PANEL_ORISETECH_OTM8009A
127	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
128	depends on OF
129	depends on DRM_MIPI_DSI
130	depends on BACKLIGHT_CLASS_DEVICE
131	help
132	  Say Y here if you want to enable support for Orise Technology
133	  otm8009a 480x800 dsi 2dl panel.
134
135config DRM_PANEL_PANASONIC_VVX10F034N00
136	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
137	depends on OF
138	depends on DRM_MIPI_DSI
139	depends on BACKLIGHT_CLASS_DEVICE
140	help
141	  Say Y here if you want to enable support for Panasonic VVX10F034N00
142	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
143	  Xperia Z2 tablets
144
145config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
146	tristate "Raspberry Pi 7-inch touchscreen panel"
147	depends on DRM_MIPI_DSI
148	help
149	  Say Y here if you want to enable support for the Raspberry
150	  Pi 7" Touchscreen.  To compile this driver as a module,
151	  choose M here.
152
153config DRM_PANEL_RAYDIUM_RM68200
154	tristate "Raydium RM68200 720x1280 DSI video mode panel"
155	depends on OF
156	depends on DRM_MIPI_DSI
157	depends on BACKLIGHT_CLASS_DEVICE
158	help
159	  Say Y here if you want to enable support for Raydium RM68200
160	  720x1280 DSI video mode panel.
161
162config DRM_PANEL_ROCKTECH_JH057N00900
163	tristate "Rocktech JH057N00900 MIPI touchscreen panel"
164	depends on OF
165	depends on DRM_MIPI_DSI
166	depends on BACKLIGHT_CLASS_DEVICE
167	help
168	  Say Y here if you want to enable support for Rocktech JH057N00900
169	  MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
170	  resolution of 720x1440 pixels, a built in backlight and touch
171	  controller.
172	  Touch input support is provided by the goodix driver and needs to be
173	  selected separately.
174
175config DRM_PANEL_RONBO_RB070D30
176	tristate "Ronbo Electronics RB070D30 panel"
177	depends on OF
178	depends on DRM_MIPI_DSI
179	depends on BACKLIGHT_CLASS_DEVICE
180	help
181	  Say Y here if you want to enable support for Ronbo Electronics
182	  RB070D30 1024x600 DSI panel.
183
184config DRM_PANEL_SAMSUNG_S6D16D0
185	tristate "Samsung S6D16D0 DSI video mode panel"
186	depends on OF
187	depends on DRM_MIPI_DSI
188	select VIDEOMODE_HELPERS
189
190config DRM_PANEL_SAMSUNG_S6E3HA2
191	tristate "Samsung S6E3HA2 DSI video mode panel"
192	depends on OF
193	depends on DRM_MIPI_DSI
194	depends on BACKLIGHT_CLASS_DEVICE
195	select VIDEOMODE_HELPERS
196
197config DRM_PANEL_SAMSUNG_S6E63J0X03
198	tristate "Samsung S6E63J0X03 DSI command mode panel"
199	depends on OF
200	depends on DRM_MIPI_DSI
201	depends on BACKLIGHT_CLASS_DEVICE
202	select VIDEOMODE_HELPERS
203
204config DRM_PANEL_SAMSUNG_S6E8AA0
205	tristate "Samsung S6E8AA0 DSI video mode panel"
206	depends on OF
207	select DRM_MIPI_DSI
208	select VIDEOMODE_HELPERS
209
210config DRM_PANEL_SEIKO_43WVF1G
211	tristate "Seiko 43WVF1G panel"
212	depends on OF
213	depends on BACKLIGHT_CLASS_DEVICE
214	select VIDEOMODE_HELPERS
215	help
216	  Say Y here if you want to enable support for the Seiko
217	  43WVF1G controller for 800x480 LCD panels
218
219config DRM_PANEL_SHARP_LQ101R1SX01
220	tristate "Sharp LQ101R1SX01 panel"
221	depends on OF
222	depends on DRM_MIPI_DSI
223	depends on BACKLIGHT_CLASS_DEVICE
224	help
225	  Say Y here if you want to enable support for Sharp LQ101R1SX01
226	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
227	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
228	  the host and has a built-in LED backlight.
229
230	  To compile this driver as a module, choose M here: the module
231	  will be called panel-sharp-lq101r1sx01.
232
233config DRM_PANEL_SHARP_LS043T1LE01
234	tristate "Sharp LS043T1LE01 qHD video mode panel"
235	depends on OF
236	depends on DRM_MIPI_DSI
237	depends on BACKLIGHT_CLASS_DEVICE
238	help
239	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
240	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
241
242config DRM_PANEL_SITRONIX_ST7701
243	tristate "Sitronix ST7701 panel driver"
244	depends on OF
245	depends on DRM_MIPI_DSI
246	depends on BACKLIGHT_CLASS_DEVICE
247	help
248	  Say Y here if you want to enable support for the Sitronix
249	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
250	  system interfaces.
251
252config DRM_PANEL_SITRONIX_ST7789V
253	tristate "Sitronix ST7789V panel"
254	depends on OF && SPI
255	depends on BACKLIGHT_CLASS_DEVICE
256	help
257	  Say Y here if you want to enable support for the Sitronix
258	  ST7789V controller for 240x320 LCD panels
259
260config DRM_PANEL_TPO_TPG110
261	tristate "TPO TPG 800x400 panel"
262	depends on OF && SPI && GPIOLIB
263	depends on BACKLIGHT_CLASS_DEVICE
264	help
265	  Say Y here if you want to enable support for TPO TPG110
266	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
267	  800x400 LCD panels.
268
269config DRM_PANEL_TRULY_NT35597_WQXGA
270	tristate "Truly WQXGA"
271	depends on OF
272	depends on DRM_MIPI_DSI
273	help
274	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
275	  Video Mode panel
276endmenu
277