1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TV101WUM_NL6 71 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 77 45NA WUXGA PANEL DSI Video Mode panel 78 79config DRM_PANEL_DSI_CM 80 tristate "Generic DSI command mode panels" 81 depends on OF 82 depends on DRM_MIPI_DSI 83 depends on BACKLIGHT_CLASS_DEVICE 84 help 85 DRM panel driver for DSI command mode panels with support for 86 embedded and external backlights. 87 88config DRM_PANEL_LVDS 89 tristate "Generic LVDS panel driver" 90 depends on OF 91 depends on BACKLIGHT_CLASS_DEVICE 92 select VIDEOMODE_HELPERS 93 help 94 This driver supports LVDS panels that don't require device-specific 95 handling of power supplies or control signals. It implements automatic 96 backlight handling if the panel is attached to a backlight controller. 97 98config DRM_PANEL_SIMPLE 99 tristate "support for simple panels (other than eDP ones)" 100 depends on OF 101 depends on BACKLIGHT_CLASS_DEVICE 102 depends on PM 103 select VIDEOMODE_HELPERS 104 help 105 DRM panel driver for dumb non-eDP panels that need at most a regulator 106 and a GPIO to be powered up. Optionally a backlight can be attached so 107 that it can be automatically turned off when the panel goes into a 108 low power state. 109 110config DRM_PANEL_EDP 111 tristate "support for simple Embedded DisplayPort panels" 112 depends on OF 113 depends on BACKLIGHT_CLASS_DEVICE 114 depends on PM 115 select VIDEOMODE_HELPERS 116 select DRM_DISPLAY_DP_HELPER 117 select DRM_DISPLAY_HELPER 118 select DRM_DP_AUX_BUS 119 select DRM_KMS_HELPER 120 help 121 DRM panel driver for dumb eDP panels that need at most a regulator and 122 a GPIO to be powered up. Optionally a backlight can be attached so 123 that it can be automatically turned off when the panel goes into a 124 low power state. 125 126config DRM_PANEL_EBBG_FT8719 127 tristate "EBBG FT8719 panel driver" 128 depends on OF 129 depends on DRM_MIPI_DSI 130 depends on BACKLIGHT_CLASS_DEVICE 131 help 132 Say Y here if you want to enable support for the EBBG FT8719 133 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 134 The panel has a resolution of 1080x2246. It provides a MIPI DSI 135 interface to the host. 136 137config DRM_PANEL_ELIDA_KD35T133 138 tristate "Elida KD35T133 panel driver" 139 depends on OF 140 depends on DRM_MIPI_DSI 141 depends on BACKLIGHT_CLASS_DEVICE 142 help 143 Say Y here if you want to enable support for the Elida 144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 145 system interfaces. 146 147config DRM_PANEL_FEIXIN_K101_IM2BA02 148 tristate "Feixin K101 IM2BA02 panel" 149 depends on OF 150 depends on DRM_MIPI_DSI 151 depends on BACKLIGHT_CLASS_DEVICE 152 help 153 Say Y here if you want to enable support for the Feixin K101 IM2BA02 154 4-lane 800x1280 MIPI DSI panel. 155 156config DRM_PANEL_FEIYANG_FY07024DI26A30D 157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 158 depends on OF 159 depends on DRM_MIPI_DSI 160 depends on BACKLIGHT_CLASS_DEVICE 161 help 162 Say Y if you want to enable support for panels based on the 163 Feiyang FY07024DI26A30-D MIPI-DSI interface. 164 165config DRM_PANEL_HIMAX_HX8394 166 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 167 depends on OF 168 depends on DRM_MIPI_DSI 169 depends on BACKLIGHT_CLASS_DEVICE 170 help 171 Say Y if you want to enable support for panels based on the 172 Himax HX8394 controller, such as the HannStar HSD060BHW4 173 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 174 175 If M is selected the module will be called panel-himax-hx8394. 176 177config DRM_PANEL_ILITEK_IL9322 178 tristate "Ilitek ILI9322 320x240 QVGA panels" 179 depends on OF && SPI 180 select REGMAP 181 help 182 Say Y here if you want to enable support for Ilitek IL9322 183 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 184 185config DRM_PANEL_ILITEK_ILI9341 186 tristate "Ilitek ILI9341 240x320 QVGA panels" 187 depends on OF && SPI 188 select DRM_KMS_HELPER 189 select DRM_GEM_DMA_HELPER 190 depends on BACKLIGHT_CLASS_DEVICE 191 select DRM_MIPI_DBI 192 help 193 Say Y here if you want to enable support for Ilitek IL9341 194 QVGA (240x320) RGB panels. support serial & parallel rgb 195 interface. 196 197config DRM_PANEL_ILITEK_ILI9881C 198 tristate "Ilitek ILI9881C-based panels" 199 depends on OF 200 depends on DRM_MIPI_DSI 201 depends on BACKLIGHT_CLASS_DEVICE 202 help 203 Say Y if you want to enable support for panels based on the 204 Ilitek ILI9881c controller. 205 206config DRM_PANEL_INNOLUX_EJ030NA 207 tristate "Innolux EJ030NA 320x480 LCD panel" 208 depends on OF && SPI 209 select REGMAP_SPI 210 help 211 Say Y here to enable support for the Innolux/Chimei EJ030NA 212 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 213 and LDK handheld gaming consoles. 214 215config DRM_PANEL_INNOLUX_P079ZCA 216 tristate "Innolux P079ZCA panel" 217 depends on OF 218 depends on DRM_MIPI_DSI 219 depends on BACKLIGHT_CLASS_DEVICE 220 help 221 Say Y here if you want to enable support for Innolux P079ZCA 222 TFT-LCD modules. The panel has a 1024x768 resolution and uses 223 24 bit RGB per pixel. It provides a MIPI DSI interface to 224 the host and has a built-in LED backlight. 225 226config DRM_PANEL_JADARD_JD9365DA_H3 227 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Jadard JD9365DA-H3 233 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 234 800RGBx1280 dots at maximum. 235 236config DRM_PANEL_JDI_LT070ME05000 237 tristate "JDI LT070ME05000 WUXGA DSI panel" 238 depends on OF 239 depends on DRM_MIPI_DSI 240 depends on BACKLIGHT_CLASS_DEVICE 241 help 242 Say Y here if you want to enable support for JDI DSI video mode 243 panel as found in Google Nexus 7 (2013) devices. 244 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 245 24 bit per pixel. 246 247config DRM_PANEL_JDI_R63452 248 tristate "JDI R63452 Full HD DSI panel" 249 depends on OF 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for the JDI R63452 254 DSI command mode panel as found in Xiaomi Mi 5 Devices. 255 256config DRM_PANEL_KHADAS_TS050 257 tristate "Khadas TS050 panel" 258 depends on OF 259 depends on DRM_MIPI_DSI 260 depends on BACKLIGHT_CLASS_DEVICE 261 help 262 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 263 panel module. The panel has a 1080x1920 resolution and uses 264 24 bit RGB per pixel. It provides a MIPI DSI interface to 265 the host, a built-in LED backlight and touch controller. 266 267config DRM_PANEL_KINGDISPLAY_KD097D04 268 tristate "Kingdisplay kd097d04 panel" 269 depends on OF 270 depends on DRM_MIPI_DSI 271 depends on BACKLIGHT_CLASS_DEVICE 272 help 273 Say Y here if you want to enable support for Kingdisplay kd097d04 274 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 275 24 bit RGB per pixel. It provides a MIPI DSI interface to 276 the host and has a built-in LED backlight. 277 278config DRM_PANEL_LEADTEK_LTK050H3146W 279 tristate "Leadtek LTK050H3146W panel" 280 depends on OF 281 depends on DRM_MIPI_DSI 282 depends on BACKLIGHT_CLASS_DEVICE 283 help 284 Say Y here if you want to enable support for Leadtek LTK050H3146W 285 TFT-LCD modules. The panel has a 720x1280 resolution and uses 286 24 bit RGB per pixel. It provides a MIPI DSI interface to 287 the host and has a built-in LED backlight. 288 289config DRM_PANEL_LEADTEK_LTK500HD1829 290 tristate "Leadtek LTK500HD1829 panel" 291 depends on OF 292 depends on DRM_MIPI_DSI 293 depends on BACKLIGHT_CLASS_DEVICE 294 help 295 Say Y here if you want to enable support for Kingdisplay kd097d04 296 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 297 24 bit RGB per pixel. It provides a MIPI DSI interface to 298 the host and has a built-in LED backlight. 299 300config DRM_PANEL_SAMSUNG_LD9040 301 tristate "Samsung LD9040 RGB/SPI panel" 302 depends on OF && SPI 303 select VIDEOMODE_HELPERS 304 305config DRM_PANEL_LG_LB035Q02 306 tristate "LG LB035Q024573 RGB panel" 307 depends on GPIOLIB && OF && SPI 308 help 309 Say Y here if you want to enable support for the LB035Q02 RGB panel 310 (found on the Gumstix Overo Palo35 board). To compile this driver as 311 a module, choose M here. 312 313config DRM_PANEL_LG_LG4573 314 tristate "LG4573 RGB/SPI panel" 315 depends on OF && SPI 316 select VIDEOMODE_HELPERS 317 help 318 Say Y here if you want to enable support for LG4573 RGB panel. 319 To compile this driver as a module, choose M here. 320 321config DRM_PANEL_MAGNACHIP_D53E6EA8966 322 tristate "Magnachip D53E6EA8966 DSI panel" 323 depends on OF && SPI 324 depends on DRM_MIPI_DSI 325 depends on BACKLIGHT_CLASS_DEVICE 326 select DRM_MIPI_DBI 327 help 328 DRM panel driver for the Samsung AMS495QA01 panel controlled 329 with the Magnachip D53E6EA8966 panel IC. This panel receives 330 video data via DSI but commands via 9-bit SPI using DBI. 331 332config DRM_PANEL_NEC_NL8048HL11 333 tristate "NEC NL8048HL11 RGB panel" 334 depends on GPIOLIB && OF && SPI 335 help 336 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 337 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 338 as a module, choose M here. 339 340config DRM_PANEL_NEWVISION_NV3051D 341 tristate "NewVision NV3051D DSI panel" 342 depends on OF 343 depends on DRM_MIPI_DSI 344 depends on BACKLIGHT_CLASS_DEVICE 345 help 346 This driver supports the NV3051D based panel found on the Anbernic 347 RG353P and RG353V. 348 349config DRM_PANEL_NEWVISION_NV3052C 350 tristate "NewVision NV3052C RGB/SPI panel" 351 depends on OF && SPI 352 depends on BACKLIGHT_CLASS_DEVICE 353 select DRM_MIPI_DBI 354 help 355 Say Y here if you want to enable support for the panels built 356 around the NewVision NV3052C display controller. 357 358config DRM_PANEL_NOVATEK_NT35510 359 tristate "Novatek NT35510 RGB panel driver" 360 depends on OF 361 depends on DRM_MIPI_DSI 362 depends on BACKLIGHT_CLASS_DEVICE 363 help 364 Say Y here if you want to enable support for the panels built 365 around the Novatek NT35510 display controller, such as some 366 Hydis panels. 367 368config DRM_PANEL_NOVATEK_NT35560 369 tristate "Novatek NT35560 DSI command mode panel" 370 depends on OF 371 depends on DRM_MIPI_DSI 372 depends on BACKLIGHT_CLASS_DEVICE 373 select VIDEOMODE_HELPERS 374 help 375 Say Y here if you want to enable the Novatek NT35560 display 376 controller. This panel supports DSI in both command and video 377 mode. This supports several panels such as Sony ACX424AKM and 378 ACX424AKP. 379 380config DRM_PANEL_NOVATEK_NT35950 381 tristate "Novatek NT35950 DSI panel" 382 depends on OF 383 depends on DRM_MIPI_DSI 384 depends on BACKLIGHT_CLASS_DEVICE 385 help 386 Say Y here if you want to enable support for the panels built 387 around the Novatek NT35950 display controller, such as some 388 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 389 mobile phones. 390 391config DRM_PANEL_NOVATEK_NT36523 392 tristate "Novatek NT36523 panel driver" 393 depends on OF 394 depends on DRM_MIPI_DSI 395 depends on BACKLIGHT_CLASS_DEVICE 396 help 397 Say Y here if you want to enable support for the panels built 398 around the Novatek NT36523 display controller, such as some 399 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 400 401config DRM_PANEL_NOVATEK_NT36672A 402 tristate "Novatek NT36672A DSI panel" 403 depends on OF 404 depends on DRM_MIPI_DSI 405 depends on BACKLIGHT_CLASS_DEVICE 406 help 407 Say Y here if you want to enable support for the panels built 408 around the Novatek NT36672A display controller, such as some 409 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 410 411config DRM_PANEL_NOVATEK_NT39016 412 tristate "Novatek NT39016 RGB/SPI panel" 413 depends on OF && SPI 414 depends on BACKLIGHT_CLASS_DEVICE 415 select REGMAP_SPI 416 help 417 Say Y here if you want to enable support for the panels built 418 around the Novatek NT39016 display controller. 419 420config DRM_PANEL_MANTIX_MLAF057WE51 421 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 422 depends on OF 423 depends on DRM_MIPI_DSI 424 depends on BACKLIGHT_CLASS_DEVICE 425 help 426 Say Y here if you want to enable support for the Mantix 427 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 428 has a resolution of 720x1440 pixels, a built in backlight and touch 429 controller. 430 431config DRM_PANEL_OLIMEX_LCD_OLINUXINO 432 tristate "Olimex LCD-OLinuXino panel" 433 depends on OF 434 depends on I2C 435 depends on BACKLIGHT_CLASS_DEVICE 436 select CRC32 437 help 438 The panel is used with different sizes LCDs, from 480x272 to 439 1280x800, and 24 bit per pixel. 440 441 Say Y here if you want to enable support for Olimex Ltd. 442 LCD-OLinuXino panel. 443 444config DRM_PANEL_ORISETECH_OTA5601A 445 tristate "Orise Technology ota5601a RGB/SPI panel" 446 depends on SPI 447 depends on BACKLIGHT_CLASS_DEVICE 448 select REGMAP_SPI 449 help 450 Say Y here if you want to enable support for the panels built 451 around the Orise Technology OTA9601A display controller. 452 453config DRM_PANEL_ORISETECH_OTM8009A 454 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 455 depends on OF 456 depends on DRM_MIPI_DSI 457 depends on BACKLIGHT_CLASS_DEVICE 458 help 459 Say Y here if you want to enable support for Orise Technology 460 otm8009a 480x800 dsi 2dl panel. 461 462config DRM_PANEL_OSD_OSD101T2587_53TS 463 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 464 depends on OF 465 depends on DRM_MIPI_DSI 466 depends on BACKLIGHT_CLASS_DEVICE 467 help 468 Say Y here if you want to enable support for One Stop Displays 469 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 470 471config DRM_PANEL_PANASONIC_VVX10F034N00 472 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 473 depends on OF 474 depends on DRM_MIPI_DSI 475 depends on BACKLIGHT_CLASS_DEVICE 476 help 477 Say Y here if you want to enable support for Panasonic VVX10F034N00 478 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 479 Xperia Z2 tablets 480 481config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 482 tristate "Raspberry Pi 7-inch touchscreen panel" 483 depends on DRM_MIPI_DSI 484 help 485 Say Y here if you want to enable support for the Raspberry 486 Pi 7" Touchscreen. To compile this driver as a module, 487 choose M here. 488 489config DRM_PANEL_RAYDIUM_RM67191 490 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 491 depends on OF 492 depends on DRM_MIPI_DSI 493 depends on BACKLIGHT_CLASS_DEVICE 494 help 495 Say Y here if you want to enable support for Raydium RM67191 FHD 496 (1080x1920) DSI panel. 497 498config DRM_PANEL_RAYDIUM_RM68200 499 tristate "Raydium RM68200 720x1280 DSI video mode panel" 500 depends on OF 501 depends on DRM_MIPI_DSI 502 depends on BACKLIGHT_CLASS_DEVICE 503 help 504 Say Y here if you want to enable support for Raydium RM68200 505 720x1280 DSI video mode panel. 506 507config DRM_PANEL_RONBO_RB070D30 508 tristate "Ronbo Electronics RB070D30 panel" 509 depends on OF 510 depends on DRM_MIPI_DSI 511 depends on BACKLIGHT_CLASS_DEVICE 512 help 513 Say Y here if you want to enable support for Ronbo Electronics 514 RB070D30 1024x600 DSI panel. 515 516config DRM_PANEL_SAMSUNG_ATNA33XC20 517 tristate "Samsung ATNA33XC20 eDP panel" 518 depends on OF 519 depends on BACKLIGHT_CLASS_DEVICE 520 depends on PM 521 select DRM_DISPLAY_DP_HELPER 522 select DRM_DISPLAY_HELPER 523 select DRM_DP_AUX_BUS 524 help 525 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 526 be handled by the DRM_PANEL_SIMPLE driver because its power 527 sequencing is non-standard. 528 529config DRM_PANEL_SAMSUNG_DB7430 530 tristate "Samsung DB7430-based DPI panels" 531 depends on OF && SPI && GPIOLIB 532 depends on BACKLIGHT_CLASS_DEVICE 533 select DRM_MIPI_DBI 534 help 535 Say Y here if you want to enable support for the Samsung 536 DB7430 DPI display controller used in such devices as the 537 LMS397KF04 480x800 DPI panel. 538 539config DRM_PANEL_SAMSUNG_S6D16D0 540 tristate "Samsung S6D16D0 DSI video mode panel" 541 depends on OF 542 depends on DRM_MIPI_DSI 543 select VIDEOMODE_HELPERS 544 545config DRM_PANEL_SAMSUNG_S6D27A1 546 tristate "Samsung S6D27A1 DPI panel driver" 547 depends on OF && SPI && GPIOLIB 548 select DRM_MIPI_DBI 549 help 550 Say Y here if you want to enable support for the Samsung 551 S6D27A1 DPI 480x800 panel. 552 553 This panel can be found in Samsung Galaxy Ace 2 554 GT-I8160 mobile phone. 555 556config DRM_PANEL_SAMSUNG_S6D7AA0 557 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 558 depends on OF 559 depends on BACKLIGHT_CLASS_DEVICE 560 select DRM_MIPI_DSI 561 select VIDEOMODE_HELPERS 562 563config DRM_PANEL_SAMSUNG_S6E3HA2 564 tristate "Samsung S6E3HA2 DSI video mode panel" 565 depends on OF 566 depends on DRM_MIPI_DSI 567 depends on BACKLIGHT_CLASS_DEVICE 568 select VIDEOMODE_HELPERS 569 570config DRM_PANEL_SAMSUNG_S6E63J0X03 571 tristate "Samsung S6E63J0X03 DSI command mode panel" 572 depends on OF 573 depends on DRM_MIPI_DSI 574 depends on BACKLIGHT_CLASS_DEVICE 575 select VIDEOMODE_HELPERS 576 577config DRM_PANEL_SAMSUNG_S6E63M0 578 tristate "Samsung S6E63M0 RGB panel" 579 depends on OF 580 depends on BACKLIGHT_CLASS_DEVICE 581 help 582 Say Y here if you want to enable support for Samsung S6E63M0 583 AMOLED LCD panel. This panel can be accessed using SPI or 584 DSI. 585 586config DRM_PANEL_SAMSUNG_S6E63M0_SPI 587 tristate "Samsung S6E63M0 RGB SPI interface" 588 depends on SPI 589 depends on DRM_PANEL_SAMSUNG_S6E63M0 590 default DRM_PANEL_SAMSUNG_S6E63M0 591 select DRM_MIPI_DBI 592 help 593 Say Y here if you want to be able to access the Samsung 594 S6E63M0 panel using SPI. 595 596config DRM_PANEL_SAMSUNG_S6E63M0_DSI 597 tristate "Samsung S6E63M0 RGB DSI interface" 598 depends on DRM_MIPI_DSI 599 depends on DRM_PANEL_SAMSUNG_S6E63M0 600 help 601 Say Y here if you want to be able to access the Samsung 602 S6E63M0 panel using DSI. 603 604config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 605 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 606 depends on OF 607 select DRM_MIPI_DSI 608 select VIDEOMODE_HELPERS 609 610config DRM_PANEL_SAMSUNG_S6E8AA0 611 tristate "Samsung S6E8AA0 DSI video mode panel" 612 depends on OF 613 select DRM_MIPI_DSI 614 select VIDEOMODE_HELPERS 615 616config DRM_PANEL_SAMSUNG_SOFEF00 617 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 618 depends on OF 619 depends on DRM_MIPI_DSI 620 depends on BACKLIGHT_CLASS_DEVICE 621 select VIDEOMODE_HELPERS 622 help 623 Say Y or M here if you want to enable support for the Samsung AMOLED 624 command mode panels found in the OnePlus 6/6T smartphones. 625 626 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 627 628config DRM_PANEL_SEIKO_43WVF1G 629 tristate "Seiko 43WVF1G panel" 630 depends on OF 631 depends on BACKLIGHT_CLASS_DEVICE 632 select VIDEOMODE_HELPERS 633 help 634 Say Y here if you want to enable support for the Seiko 635 43WVF1G controller for 800x480 LCD panels 636 637config DRM_PANEL_SHARP_LQ101R1SX01 638 tristate "Sharp LQ101R1SX01 panel" 639 depends on OF 640 depends on DRM_MIPI_DSI 641 depends on BACKLIGHT_CLASS_DEVICE 642 help 643 Say Y here if you want to enable support for Sharp LQ101R1SX01 644 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 645 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 646 the host and has a built-in LED backlight. 647 648 To compile this driver as a module, choose M here: the module 649 will be called panel-sharp-lq101r1sx01. 650 651config DRM_PANEL_SHARP_LS037V7DW01 652 tristate "Sharp LS037V7DW01 VGA LCD panel" 653 depends on GPIOLIB && OF && REGULATOR 654 help 655 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 656 (480x640) LCD panel (found on the TI SDP3430 board). 657 658config DRM_PANEL_SHARP_LS043T1LE01 659 tristate "Sharp LS043T1LE01 qHD video mode panel" 660 depends on OF 661 depends on DRM_MIPI_DSI 662 depends on BACKLIGHT_CLASS_DEVICE 663 help 664 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 665 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 666 667config DRM_PANEL_SHARP_LS060T1SX01 668 tristate "Sharp LS060T1SX01 FullHD video mode panel" 669 depends on OF 670 depends on DRM_MIPI_DSI 671 depends on BACKLIGHT_CLASS_DEVICE 672 help 673 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 674 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 675 Bundle. 676 677config DRM_PANEL_SITRONIX_ST7701 678 tristate "Sitronix ST7701 panel driver" 679 depends on OF 680 depends on DRM_MIPI_DSI 681 depends on BACKLIGHT_CLASS_DEVICE 682 help 683 Say Y here if you want to enable support for the Sitronix 684 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 685 system interfaces. 686 687config DRM_PANEL_SITRONIX_ST7703 688 tristate "Sitronix ST7703 based MIPI touchscreen panels" 689 depends on OF 690 depends on DRM_MIPI_DSI 691 depends on BACKLIGHT_CLASS_DEVICE 692 help 693 Say Y here if you want to enable support for Sitronix ST7703 based 694 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 695 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 696 in backlight and touch controller. 697 Touch input support is provided by the goodix driver and needs to be 698 selected separately. 699 700config DRM_PANEL_SITRONIX_ST7789V 701 tristate "Sitronix ST7789V panel" 702 depends on OF && SPI 703 depends on BACKLIGHT_CLASS_DEVICE 704 help 705 Say Y here if you want to enable support for the Sitronix 706 ST7789V controller for 240x320 LCD panels 707 708config DRM_PANEL_SONY_ACX565AKM 709 tristate "Sony ACX565AKM panel" 710 depends on GPIOLIB && OF && SPI 711 depends on BACKLIGHT_CLASS_DEVICE 712 help 713 Say Y here if you want to enable support for the Sony ACX565AKM 714 800x600 3.5" panel (found on the Nokia N900). 715 716config DRM_PANEL_SONY_TD4353_JDI 717 tristate "Sony TD4353 JDI panel" 718 depends on GPIOLIB && OF 719 depends on DRM_MIPI_DSI 720 depends on BACKLIGHT_CLASS_DEVICE 721 help 722 Say Y here if you want to enable support for the Sony Tama 723 TD4353 JDI command mode panel as found on some Sony Xperia 724 XZ2 and XZ2 Compact smartphones. 725 726config DRM_PANEL_SONY_TULIP_TRULY_NT35521 727 tristate "Sony Tulip Truly NT35521 panel" 728 depends on GPIOLIB && OF 729 depends on DRM_MIPI_DSI 730 depends on BACKLIGHT_CLASS_DEVICE 731 help 732 Say Y here if you want to enable support for the Sony Tulip 733 NT35521 1280x720 video mode panel as found on Sony Xperia M4 734 Aqua phone. 735 736config DRM_PANEL_TDO_TL070WSH30 737 tristate "TDO TL070WSH30 DSI panel" 738 depends on OF 739 depends on DRM_MIPI_DSI 740 depends on BACKLIGHT_CLASS_DEVICE 741 help 742 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 743 panel module. The panel has a 1024×600 resolution and uses 744 24 bit RGB per pixel. It provides a MIPI DSI interface to 745 the host, a built-in LED backlight and touch controller. 746 747config DRM_PANEL_TPO_TD028TTEC1 748 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 749 depends on OF && SPI 750 depends on BACKLIGHT_CLASS_DEVICE 751 help 752 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 753 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 754 755config DRM_PANEL_TPO_TD043MTEA1 756 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 757 depends on GPIOLIB && OF && REGULATOR && SPI 758 help 759 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 760 4.3" panel (found on the OMAP3 Pandora board). 761 762config DRM_PANEL_TPO_TPG110 763 tristate "TPO TPG 800x400 panel" 764 depends on OF && SPI && GPIOLIB 765 depends on BACKLIGHT_CLASS_DEVICE 766 help 767 Say Y here if you want to enable support for TPO TPG110 768 400CH LTPS TFT LCD Single Chip Digital Driver for up to 769 800x400 LCD panels. 770 771config DRM_PANEL_TRULY_NT35597_WQXGA 772 tristate "Truly WQXGA" 773 depends on OF 774 depends on DRM_MIPI_DSI 775 help 776 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 777 Video Mode panel 778 779config DRM_PANEL_VISIONOX_RM69299 780 tristate "Visionox RM69299" 781 depends on OF 782 depends on DRM_MIPI_DSI 783 help 784 Say Y here if you want to enable support for Visionox 785 RM69299 DSI Video Mode panel. 786 787config DRM_PANEL_VISIONOX_VTDR6130 788 tristate "Visionox VTDR6130" 789 depends on OF 790 depends on DRM_MIPI_DSI 791 depends on BACKLIGHT_CLASS_DEVICE 792 help 793 Say Y here if you want to enable support for Visionox 794 VTDR6130 1080x2400 AMOLED DSI panel. 795 796config DRM_PANEL_WIDECHIPS_WS2401 797 tristate "Widechips WS2401 DPI panel driver" 798 depends on SPI && GPIOLIB 799 depends on BACKLIGHT_CLASS_DEVICE 800 select DRM_MIPI_DBI 801 help 802 Say Y here if you want to enable support for the Widechips WS2401 DPI 803 480x800 display controller used in panels such as Samsung LMS380KF01. 804 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 805 806config DRM_PANEL_XINPENG_XPP055C272 807 tristate "Xinpeng XPP055C272 panel driver" 808 depends on OF 809 depends on DRM_MIPI_DSI 810 depends on BACKLIGHT_CLASS_DEVICE 811 help 812 Say Y here if you want to enable support for the Xinpeng 813 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 814 system interfaces. 815endmenu 816