xref: /linux/drivers/gpu/drm/panel/Kconfig (revision cb8fef4b07f71da01843457b66e579ad248a625e)
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	tristate
4	depends on DRM
5	select DRM_KMS_HELPER
6	help
7	  Panel registration and lookup framework.
8
9menu "Display Panels"
10	depends on DRM && DRM_PANEL
11
12config DRM_PANEL_ABT_Y030XX067A
13	tristate "ABT Y030XX067A 320x480 LCD panel"
14	depends on OF && SPI
15	select REGMAP_SPI
16	help
17	  Say Y here to enable support for the Asia Better Technology Ltd.
18	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
19	  and RG-99 handheld gaming consoles.
20
21config DRM_PANEL_ANBERNIC_TD4310
22	tristate "Anbernic TD4310 LCD panel"
23	depends on GPIOLIB && OF
24	depends on DRM_MIPI_DSI
25	depends on BACKLIGHT_CLASS_DEVICE
26	help
27	  Say Y here to enable support for Anbernic designed panels with the
28	  TD4310 panel controller such as the ones used on the Anbernic RG
29	  Vita Pro.
30
31config DRM_PANEL_ARM_VERSATILE
32	tristate "ARM Versatile panel driver"
33	depends on OF
34	depends on MFD_SYSCON
35	select VIDEOMODE_HELPERS
36	help
37	  This driver supports the ARM Versatile panels connected to ARM
38	  reference designs. The panel is detected using special registers
39	  in the Versatile family syscon registers.
40
41config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
42	tristate "ASUS Z00T TM5P5 NT35596 panel"
43	depends on GPIOLIB && OF
44	depends on DRM_MIPI_DSI
45	depends on BACKLIGHT_CLASS_DEVICE
46	help
47	  Say Y here if you want to enable support for the ASUS TMP5P5
48	  NT35596 1080x1920 video mode panel as found in some Asus
49	  Zenfone 2 Laser Z00T devices.
50
51config DRM_PANEL_AUO_A030JTN01
52	tristate "AUO A030JTN01"
53	depends on SPI
54	select REGMAP_SPI
55	help
56	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
57	  as found in the YLM RS-97 handheld gaming console.
58
59config DRM_PANEL_BOE_BF060Y8M_AJ0
60	tristate "Boe BF060Y8M-AJ0 panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
66	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
67	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and backlight is controlled through DSI commands.
69
70config DRM_PANEL_BOE_HIMAX8279D
71	tristate "Boe Himax8279d panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for Boe Himax8279d
77	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
78	  24 bit RGB per pixel. It provides a MIPI DSI interface to
79	  the host and has a built-in LED backlight.
80
81config DRM_PANEL_BOE_TD4320
82	tristate "BOE TD4320 DSI panel"
83	depends on OF
84	depends on DRM_MIPI_DSI
85	depends on BACKLIGHT_CLASS_DEVICE
86	help
87	  Say Y here if you want to enable support for BOE TD4320 1080x2340
88	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
89
90config DRM_PANEL_BOE_TH101MB31UIG002_28A
91	tristate "Boe TH101MB31UIG002-28A panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to enable support for Boe
97	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
98	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
99	  interface to the host and has a built-in LED backlight.
100
101config DRM_PANEL_BOE_TV101WUM_NL6
102	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
103	depends on OF
104	depends on DRM_MIPI_DSI
105	depends on BACKLIGHT_CLASS_DEVICE
106	help
107	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
108	  45NA WUXGA PANEL DSI Video Mode panel
109
110config DRM_PANEL_BOE_TV101WUM_LL2
111	tristate "BOE TV101WUM LL2 1200x1920 panel"
112	depends on OF
113	depends on DRM_MIPI_DSI
114	depends on BACKLIGHT_CLASS_DEVICE
115	help
116	  Say Y here if you want to support for BOE TV101WUM-LL2
117	  WUXGA PANEL DSI Video Mode panel
118
119config DRM_PANEL_CHIPONE_ICNA35XX
120	tristate "Chipone ICNA35XX panel driver"
121	depends on OF
122	depends on DRM_MIPI_DSI
123	depends on BACKLIGHT_CLASS_DEVICE
124	select DRM_DISPLAY_HELPER
125	help
126	  Say Y here if you want to enable support for the panels built
127	  around the Chipone ICNA3512 and ICNA3520 display controllers,
128	  such as some Tianma panels used in AYN Odin2 Portal and Thor.
129
130config DRM_PANEL_CHIPWEALTH_CH13726A
131	tristate "CHIPWEALTH CH13726A-based DSI panel"
132	depends on OF
133	depends on DRM_MIPI_DSI
134	depends on BACKLIGHT_CLASS_DEVICE
135	select DRM_DISPLAY_DP_HELPER
136	select DRM_DISPLAY_HELPER
137	help
138	  Say Y here if you want to enable support for ChipWealth
139	  CH13726A-based display panels.
140
141config DRM_PANEL_EBBG_FT8719
142	tristate "EBBG FT8719 panel driver"
143	depends on GPIOLIB
144	depends on OF
145	depends on DRM_MIPI_DSI
146	depends on BACKLIGHT_CLASS_DEVICE
147	help
148	  Say Y here if you want to enable support for the EBBG FT8719
149	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
150	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
151	  interface to the host.
152
153config DRM_PANEL_ELIDA_KD35T133
154	tristate "Elida KD35T133 panel driver"
155	depends on OF
156	depends on DRM_MIPI_DSI
157	depends on BACKLIGHT_CLASS_DEVICE
158	help
159	  Say Y here if you want to enable support for the Elida
160	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
161	  system interfaces.
162
163config DRM_PANEL_FEIXIN_K101_IM2BA02
164	tristate "Feixin K101 IM2BA02 panel"
165	depends on OF
166	depends on DRM_MIPI_DSI
167	depends on BACKLIGHT_CLASS_DEVICE
168	help
169	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
170	  4-lane 800x1280 MIPI DSI panel.
171
172config DRM_PANEL_FEIYANG_FY07024DI26A30D
173	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
174	depends on OF
175	depends on DRM_MIPI_DSI
176	depends on BACKLIGHT_CLASS_DEVICE
177	help
178	  Say Y if you want to enable support for panels based on the
179	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
180
181config DRM_PANEL_FOCALTECH_OTA7290B
182	tristate "Focaltech OTA7290B"
183	depends on DRM_MIPI_DSI
184	depends on I2C
185	depends on BACKLIGHT_CLASS_DEVICE
186	select DRM_KMS_HELPER
187	help
188	  Enable support for panels using OTA7290B as a controller (for
189	  example, Waveshare 12.3" DSI TOUCH-A panel). Say Y here if you want
190	  to enable support for this panel. To compile this driver as a module,
191	  choose M here.
192
193config DRM_PANEL_DSI_CM
194	tristate "Generic DSI command mode panels"
195	depends on OF
196	depends on DRM_MIPI_DSI
197	depends on BACKLIGHT_CLASS_DEVICE
198	help
199	  DRM panel driver for DSI command mode panels with support for
200	  embedded and external backlights.
201
202config DRM_PANEL_LVDS
203	tristate "Generic LVDS panel driver"
204	depends on OF
205	depends on BACKLIGHT_CLASS_DEVICE
206	select VIDEOMODE_HELPERS
207	help
208	  This driver supports LVDS panels that don't require device-specific
209	  handling of power supplies or control signals. It implements automatic
210	  backlight handling if the panel is attached to a backlight controller.
211
212config DRM_PANEL_HIMAX_HX8279
213	tristate "Himax HX8279-based panels"
214	depends on OF
215	depends on DRM_MIPI_DSI
216	depends on BACKLIGHT_CLASS_DEVICE
217	help
218	  Say Y if you want to enable support for panels based on the
219	  Himax HX8279 controller, such as the Startek KD070FHFID078
220	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
221	  and others.
222
223config DRM_PANEL_HIMAX_HX83102
224	tristate "Himax HX83102-based panels"
225	depends on OF
226	depends on DRM_MIPI_DSI
227	depends on BACKLIGHT_CLASS_DEVICE
228	help
229	  Say Y if you want to enable support for panels based on the
230	  Himax HX83102 controller.
231
232config DRM_PANEL_HIMAX_HX83112A
233	tristate "Himax HX83112A-based DSI panel"
234	depends on OF
235	depends on DRM_MIPI_DSI
236	depends on BACKLIGHT_CLASS_DEVICE
237	select DRM_KMS_HELPER
238	help
239	  Say Y here if you want to enable support for Himax HX83112A-based
240	  display panels, such as the one found in the Fairphone 4 smartphone.
241
242config DRM_PANEL_HIMAX_HX83112B
243	tristate "Himax HX83112B-based DSI panel"
244	depends on OF
245	depends on DRM_MIPI_DSI
246	depends on BACKLIGHT_CLASS_DEVICE
247	select DRM_KMS_HELPER
248	help
249	  Say Y here if you want to enable support for Himax HX83112B-based
250	  display panels, such as the one found in the Fairphone 3 smartphone.
251
252config DRM_PANEL_HIMAX_HX83121A
253	tristate "Himax HX83121A-based DSI panel"
254	depends on OF
255	depends on DRM_MIPI_DSI
256	depends on BACKLIGHT_CLASS_DEVICE
257	select DRM_DISPLAY_HELPER
258	select DRM_DISPLAY_DSC_HELPER
259	select DRM_KMS_HELPER
260	help
261	  Say Y here if you want to enable support for Himax HX83121A-based
262	  display panels, such as the one found in the HUAWEI Matebook E Go
263          series.
264
265config DRM_PANEL_HIMAX_HX8394
266	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
267	depends on OF
268	depends on DRM_MIPI_DSI
269	depends on BACKLIGHT_CLASS_DEVICE
270	help
271	  Say Y if you want to enable support for panels based on the
272	  Himax HX8394 controller, such as the HannStar HSD060BHW4
273	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
274
275	  If M is selected the module will be called panel-himax-hx8394.
276
277config DRM_PANEL_HYDIS_HV101HD1
278	tristate "Hydis HV101HD1 panel"
279	depends on OF
280	depends on DRM_MIPI_DSI
281	depends on BACKLIGHT_CLASS_DEVICE
282	help
283	  Say Y here if you want to enable support for the Hydis HV101HD1
284	  2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT TF600T.
285	  HV101HD1 is a color active matrix TFT LCD module using amorphous
286	  silicon TFT's (Thin Film Transistors) as an active switching devices.
287
288	  If M is selected the module will be called panel-hydis-hv101hd1
289
290config DRM_PANEL_ILITEK_ILI7807S
291	tristate "Ilitek ILI7807S-based panels"
292	depends on OF
293	depends on DRM_MIPI_DSI
294	depends on BACKLIGHT_CLASS_DEVICE
295	help
296	  Say Y if you want to enable support for panels based on the
297	  Ilitek ILI7807S display controller, such as the DLC DLC0697
298	  1080x1920 MIPI DSI panel.
299
300	  If M is selected the module will be called panel-ilitek-ili7807s.
301
302config DRM_PANEL_ILITEK_ILI7836A
303	tristate "Ilitek ILI7836A-based panels"
304	depends on OF
305	depends on DRM_MIPI_DSI
306	depends on BACKLIGHT_CLASS_DEVICE
307	help
308	  Say Y if you want to enable support for panels based on the
309	  Ilitek ILI7836A DDIC.
310
311	  If M is selected the module will be called panel-ilitek-ili7836a.
312
313config DRM_PANEL_ILITEK_IL9322
314	tristate "Ilitek ILI9322 320x240 QVGA panels"
315	depends on OF && SPI
316	select REGMAP
317	help
318	  Say Y here if you want to enable support for Ilitek IL9322
319	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
320
321config DRM_PANEL_ILITEK_ILI9341
322	tristate "Ilitek ILI9341 240x320 QVGA panels"
323	depends on SPI
324	select DRM_KMS_HELPER
325	select DRM_GEM_DMA_HELPER
326	depends on BACKLIGHT_CLASS_DEVICE
327	select DRM_MIPI_DBI
328	help
329	  Say Y here if you want to enable support for Ilitek IL9341
330	  QVGA (240x320) RGB panels. support serial & parallel rgb
331	  interface.
332
333config DRM_PANEL_ILITEK_ILI9488
334	tristate "Ilitek ILI9488-based panels"
335	depends on OF
336	depends on DRM_MIPI_DSI
337	depends on BACKLIGHT_CLASS_DEVICE
338	help
339	  Say Y if you want to enable support for panels based on the
340	  Ilitek ILI9488 controller.
341
342config DRM_PANEL_ILITEK_ILI9805
343	tristate "Ilitek ILI9805-based panels"
344	depends on OF
345	depends on DRM_MIPI_DSI
346	depends on BACKLIGHT_CLASS_DEVICE
347	help
348	  Say Y if you want to enable support for panels based on the
349	  Ilitek ILI9805 controller.
350
351config DRM_PANEL_ILITEK_ILI9806E_CORE
352	tristate
353
354config DRM_PANEL_ILITEK_ILI9806E_DSI
355	tristate "Ilitek ILI9806E-based DSI panels"
356	depends on OF
357	depends on DRM_MIPI_DSI
358	depends on BACKLIGHT_CLASS_DEVICE
359	select DRM_PANEL_ILITEK_ILI9806E_CORE
360	help
361	  Say Y if you want to enable support for panels based on the
362	  Ilitek ILI9806E controller using DSI.
363
364config DRM_PANEL_ILITEK_ILI9806E_SPI
365	tristate "Ilitek ILI9806E-based RGB SPI panel"
366	depends on OF
367	depends on SPI
368	depends on BACKLIGHT_CLASS_DEVICE
369	select DRM_MIPI_DBI
370	select VIDEOMODE_HELPERS
371	select DRM_PANEL_ILITEK_ILI9806E_CORE
372	help
373	  Say Y if you want to enable support for panels based on the
374	  Ilitek ILI9806E controller using SPI.
375
376config DRM_PANEL_ILITEK_ILI9881C
377	tristate "Ilitek ILI9881C-based panels"
378	depends on OF
379	depends on DRM_MIPI_DSI
380	depends on BACKLIGHT_CLASS_DEVICE
381	help
382	  Say Y if you want to enable support for panels based on the
383	  Ilitek ILI9881c controller.
384
385config DRM_PANEL_ILITEK_ILI9882T
386	tristate "Ilitek ILI9882t-based panels"
387	depends on OF
388	depends on DRM_MIPI_DSI
389	depends on BACKLIGHT_CLASS_DEVICE
390	select DRM_DISPLAY_HELPER
391	select DRM_DISPLAY_DSC_HELPER
392	help
393	  Say Y if you want to enable support for panels based on the
394	  Ilitek ILI9882t controller.
395
396config DRM_PANEL_INNOLUX_EJ030NA
397        tristate "Innolux EJ030NA 320x480 LCD panel"
398        depends on OF && SPI
399        select REGMAP_SPI
400        help
401          Say Y here to enable support for the Innolux/Chimei EJ030NA
402          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
403          and LDK handheld gaming consoles.
404
405config DRM_PANEL_INNOLUX_P079ZCA
406	tristate "Innolux P079ZCA panel"
407	depends on OF
408	depends on DRM_MIPI_DSI
409	depends on BACKLIGHT_CLASS_DEVICE
410	help
411	  Say Y here if you want to enable support for Innolux P079ZCA
412	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
413	  24 bit RGB per pixel. It provides a MIPI DSI interface to
414	  the host and has a built-in LED backlight.
415
416config DRM_PANEL_JADARD_JD9365DA_H3
417	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
418	depends on OF
419	depends on DRM_MIPI_DSI
420	depends on BACKLIGHT_CLASS_DEVICE
421	select DRM_KMS_HELPER
422	help
423	  Say Y here if you want to enable support for Jadard JD9365DA-H3
424	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
425	  800RGBx1280 dots at maximum.
426
427config DRM_PANEL_JDI_LPM102A188A
428	tristate "JDI LPM102A188A DSI panel"
429	depends on GPIOLIB
430	depends on OF
431	depends on DRM_MIPI_DSI
432	depends on BACKLIGHT_CLASS_DEVICE
433	help
434	  Say Y here if you want to enable support for JDI LPM102A188A DSI
435	  command mode panel as found in Google Pixel C devices.
436	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
437	  to the host.
438
439config DRM_PANEL_JDI_LT070ME05000
440	tristate "JDI LT070ME05000 WUXGA DSI panel"
441	depends on OF
442	depends on DRM_MIPI_DSI
443	depends on BACKLIGHT_CLASS_DEVICE
444	help
445	  Say Y here if you want to enable support for JDI DSI video mode
446	  panel as found in Google Nexus 7 (2013) devices.
447	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
448	  24 bit per pixel.
449
450config DRM_PANEL_JDI_R63452
451	tristate "JDI R63452 Full HD DSI panel"
452	depends on OF
453	depends on DRM_MIPI_DSI
454	depends on BACKLIGHT_CLASS_DEVICE
455	help
456	  Say Y here if you want to enable support for the JDI R63452
457	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
458
459config DRM_PANEL_KHADAS_TS050
460	tristate "Khadas TS050 panel"
461	depends on OF
462	depends on DRM_MIPI_DSI
463	depends on BACKLIGHT_CLASS_DEVICE
464	help
465	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
466	  panel module. The panel has a 1080x1920 resolution and uses
467	  24 bit RGB per pixel. It provides a MIPI DSI interface to
468	  the host, a built-in LED backlight and touch controller.
469
470config DRM_PANEL_KINGDISPLAY_KD097D04
471	tristate "Kingdisplay kd097d04 panel"
472	depends on OF
473	depends on DRM_MIPI_DSI
474	depends on BACKLIGHT_CLASS_DEVICE
475	help
476	  Say Y here if you want to enable support for Kingdisplay kd097d04
477	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
478	  24 bit RGB per pixel. It provides a MIPI DSI interface to
479	  the host and has a built-in LED backlight.
480
481config DRM_PANEL_LEADTEK_LTK050H3146W
482	tristate "Leadtek LTK050H3146W panel"
483	depends on OF
484	depends on DRM_MIPI_DSI
485	depends on BACKLIGHT_CLASS_DEVICE
486	help
487	  Say Y here if you want to enable support for Leadtek LTK050H3146W
488	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
489	  24 bit RGB per pixel. It provides a MIPI DSI interface to
490	  the host and has a built-in LED backlight.
491
492config DRM_PANEL_LEADTEK_LTK500HD1829
493	tristate "Leadtek LTK500HD1829 panel"
494	depends on OF
495	depends on DRM_MIPI_DSI
496	depends on BACKLIGHT_CLASS_DEVICE
497	help
498	  Say Y here if you want to enable support for Kingdisplay kd097d04
499	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
500	  24 bit RGB per pixel. It provides a MIPI DSI interface to
501	  the host and has a built-in LED backlight.
502
503config DRM_PANEL_LINCOLNTECH_LCD197
504	tristate "Lincoln Technologies lcd197 panel"
505	depends on OF
506	depends on DRM_MIPI_DSI
507	depends on BACKLIGHT_CLASS_DEVICE
508	help
509	  Say Y here if you want to enable support for lincolntech lcd197
510	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
511	  24 bit RGB per pixel. It provides a MIPI DSI interface to
512	  the host.
513
514config DRM_PANEL_LG_LB035Q02
515	tristate "LG LB035Q024573 RGB panel"
516	depends on GPIOLIB && OF && SPI
517	help
518	  Say Y here if you want to enable support for the LB035Q02 RGB panel
519	  (found on the Gumstix Overo Palo35 board). To compile this driver as
520	  a module, choose M here.
521
522config DRM_PANEL_LG_LD070WX3
523	tristate "LG LD070WX3 MIPI DSI panel"
524	depends on OF
525	depends on DRM_MIPI_DSI
526	depends on BACKLIGHT_CLASS_DEVICE
527	select VIDEOMODE_HELPERS
528	help
529	  Say Y here if you want to enable support for the LD070WX3 MIPI DSI
530	  panel found in the NVIDIA Tegra Note 7 tablet.
531
532	  To compile this driver as a module, choose M here: the module will
533	  be called panel-lg-ld070wx3.
534
535config DRM_PANEL_LG_LG4573
536	tristate "LG4573 RGB/SPI panel"
537	depends on OF && SPI
538	select VIDEOMODE_HELPERS
539	help
540	  Say Y here if you want to enable support for LG4573 RGB panel.
541	  To compile this driver as a module, choose M here.
542
543config DRM_PANEL_LG_SW43408
544	tristate "LG SW43408 panel"
545	depends on GPIOLIB
546	depends on OF
547	depends on DRM_MIPI_DSI
548	depends on BACKLIGHT_CLASS_DEVICE
549	select DRM_DISPLAY_DSC_HELPER
550	select DRM_DISPLAY_HELPER
551	help
552	  Say Y here if you want to enable support for LG sw43408 panel.
553	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
554	  pixel. It provides a MIPI DSI interface to the host and has a
555	  built-in LED backlight.
556
557config DRM_PANEL_LXD_M9189A
558	tristate "LXD M9189A MIPI-DSI LCD panel"
559	depends on OF
560	depends on DRM_MIPI_DSI
561	depends on BACKLIGHT_CLASS_DEVICE
562	help
563	  Say Y if you want to enable support for the LXD M9189A 4-Lane
564	  1024x600 MIPI DSI panel.
565
566config DRM_PANEL_MAGNACHIP_D53E6EA8966
567	tristate "Magnachip D53E6EA8966 DSI panel"
568	depends on OF && SPI
569	depends on DRM_MIPI_DSI
570	depends on BACKLIGHT_CLASS_DEVICE
571	select DRM_MIPI_DBI
572	help
573	  DRM panel driver for the Samsung AMS495QA01 panel controlled
574	  with the Magnachip D53E6EA8966 panel IC. This panel receives
575	  video data via DSI but commands via 9-bit SPI using DBI.
576
577config DRM_PANEL_MANTIX_MLAF057WE51
578	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
579	depends on OF
580	depends on DRM_MIPI_DSI
581	depends on BACKLIGHT_CLASS_DEVICE
582	help
583	  Say Y here if you want to enable support for the Mantix
584	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
585	  has a resolution of 720x1440 pixels, a built in backlight and touch
586	  controller.
587
588config DRM_PANEL_MOTOROLA_MOT
589	tristate "Atrix 4G and Droid X2 540x960 DSI video mode panel"
590	depends on OF
591	depends on DRM_MIPI_DSI
592	depends on BACKLIGHT_CLASS_DEVICE
593	select VIDEOMODE_HELPERS
594	help
595	  Say Y here if you want to enable support for the LCD panel module
596	  for Motorola Atrix 4G or Droid X2. Exact panel vendor and model are
597	  unknown. The panel has a 540x960 resolution and uses 24 bit RGB per
598	  pixel.
599
600config DRM_PANEL_NEC_NL8048HL11
601	tristate "NEC NL8048HL11 RGB panel"
602	depends on GPIOLIB && OF && SPI
603	help
604	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
605	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
606	  as a module, choose M here.
607
608config DRM_PANEL_NEWVISION_NV3051D
609	tristate "NewVision NV3051D DSI panel"
610	depends on OF
611	depends on DRM_MIPI_DSI
612	depends on BACKLIGHT_CLASS_DEVICE
613	help
614	  This driver supports the NV3051D based panel found on the Anbernic
615	  RG353P and RG353V.
616
617config DRM_PANEL_NEWVISION_NV3052C
618	tristate "NewVision NV3052C RGB/SPI panel"
619	depends on OF && SPI
620	depends on BACKLIGHT_CLASS_DEVICE
621	select DRM_MIPI_DBI
622	help
623	  Say Y here if you want to enable support for the panels built
624	  around the NewVision NV3052C display controller.
625
626config DRM_PANEL_NOVATEK_NT35510
627	tristate "Novatek NT35510 RGB panel driver"
628	depends on OF
629	depends on DRM_MIPI_DSI
630	depends on BACKLIGHT_CLASS_DEVICE
631	help
632	  Say Y here if you want to enable support for the panels built
633	  around the Novatek NT35510 display controller, such as some
634	  Hydis panels.
635
636config DRM_PANEL_NOVATEK_NT35532
637	tristate "Novatek NT35532-based DSI video mode panel"
638	depends on OF
639	depends on DRM_MIPI_DSI
640	depends on BACKLIGHT_CLASS_DEVICE
641	select DRM_KMS_HELPER
642	help
643	  Say Y or M here if you want to enable support for Novatek
644	  NT35532-based 1080p video mode DSI panels.
645
646config DRM_PANEL_NOVATEK_NT35560
647	tristate "Novatek NT35560 DSI command mode panel"
648	depends on OF
649	depends on DRM_MIPI_DSI
650	depends on BACKLIGHT_CLASS_DEVICE
651	select VIDEOMODE_HELPERS
652	help
653	  Say Y here if you want to enable the Novatek NT35560 display
654	  controller. This panel supports DSI in both command and video
655	  mode. This supports several panels such as Sony ACX424AKM and
656	  ACX424AKP.
657
658config DRM_PANEL_NOVATEK_NT35950
659	tristate "Novatek NT35950 DSI panel"
660	depends on OF
661	depends on DRM_MIPI_DSI
662	depends on BACKLIGHT_CLASS_DEVICE
663	help
664	  Say Y here if you want to enable support for the panels built
665	  around the Novatek NT35950 display controller, such as some
666	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
667	  mobile phones.
668
669config DRM_PANEL_NOVATEK_NT36523
670	tristate "Novatek NT36523 panel driver"
671	depends on OF
672	depends on DRM_MIPI_DSI
673	depends on BACKLIGHT_CLASS_DEVICE
674	help
675	  Say Y here if you want to enable support for the panels built
676	  around the Novatek NT36523 display controller, such as some
677	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
678
679config DRM_PANEL_NOVATEK_NT36532
680	tristate "Novatek NT36532-based MIPI-DSI panels"
681	depends on OF
682	depends on DRM_MIPI_DSI
683	depends on BACKLIGHT_CLASS_DEVICE
684	select DRM_DISPLAY_DSC_HELPER
685	select DRM_DISPLAY_HELPER
686	select DRM_KMS_HELPER
687	help
688	  Say Y here if you want to enable support for the panels built
689	  around the Novatek NT36532 display controller, such as some
690	  CSOT panels used in OnePlus Pad 2 tablets. These panels are
691	  typically dual-DSI and may use DSC (Display Stream Compression).
692
693config DRM_PANEL_NOVATEK_NT36536
694	tristate "Novatek NT36536 panel driver"
695	depends on OF
696	depends on DRM_MIPI_DSI
697	depends on BACKLIGHT_CLASS_DEVICE
698	select DRM_DISPLAY_DSC_HELPER
699	select DRM_DISPLAY_HELPER
700	select DRM_KMS_HELPER
701	help
702	  Say Y here if you want to enable support for Novatek NT36536-based
703	  display panels, such as the one found in the LENOVO Legion Y700
704	  Gen4.
705
706config DRM_PANEL_NOVATEK_NT36672A
707	tristate "Novatek NT36672A DSI panel"
708	depends on GPIOLIB
709	depends on OF
710	depends on DRM_MIPI_DSI
711	depends on BACKLIGHT_CLASS_DEVICE
712	help
713	  Say Y here if you want to enable support for the panels built
714	  around the Novatek NT36672A display controller, such as some
715	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
716
717config DRM_PANEL_NOVATEK_NT36672E
718	tristate "Novatek NT36672E DSI panel"
719	depends on GPIOLIB
720	depends on OF
721	depends on DRM_MIPI_DSI
722	depends on BACKLIGHT_CLASS_DEVICE
723	help
724	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
725	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
726	  RGB per pixel.
727
728config DRM_PANEL_NOVATEK_NT37700F
729	tristate "Novatek NT37700F DSI panel"
730	depends on OF
731	depends on DRM_MIPI_DSI
732	depends on BACKLIGHT_CLASS_DEVICE
733	help
734	  Say Y here if you want to enable support for Novatek NT37700F DSI
735	  panel module. The panel has a resolution of 1080x2160.
736
737config DRM_PANEL_NOVATEK_NT37801
738	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
739	depends on OF
740	depends on DRM_MIPI_DSI
741	depends on BACKLIGHT_CLASS_DEVICE
742	select DRM_DISPLAY_DSC_HELPER
743	select DRM_DISPLAY_HELPER
744	help
745	  Say Y here if you want to enable support for Novatek NT37801 (or
746	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
747	  resolution.
748
749config DRM_PANEL_NOVATEK_NT39016
750	tristate "Novatek NT39016 RGB/SPI panel"
751	depends on OF && SPI
752	depends on BACKLIGHT_CLASS_DEVICE
753	select REGMAP_SPI
754	help
755	  Say Y here if you want to enable support for the panels built
756	  around the Novatek NT39016 display controller.
757
758config DRM_PANEL_NOVATEK_NT51021
759	tristate "Novatek NT51021 DSI panel"
760	depends on OF
761	depends on DRM_MIPI_DSI
762	depends on BACKLIGHT_CLASS_DEVICE
763	help
764	  Say Y here if you want to enable support for the panels built
765	  around the Novatek NT51021 Display controller.
766
767config DRM_PANEL_OLIMEX_LCD_OLINUXINO
768	tristate "Olimex LCD-OLinuXino panel"
769	depends on OF
770	depends on I2C
771	depends on BACKLIGHT_CLASS_DEVICE
772	select CRC32
773	help
774	  The panel is used with different sizes LCDs, from 480x272 to
775	  1280x800, and 24 bit per pixel.
776
777	  Say Y here if you want to enable support for Olimex Ltd.
778	  LCD-OLinuXino panel.
779
780config DRM_PANEL_ORISETECH_OTA5601A
781        tristate "Orise Technology ota5601a RGB/SPI panel"
782        depends on SPI
783        depends on BACKLIGHT_CLASS_DEVICE
784        select REGMAP_SPI
785        help
786          Say Y here if you want to enable support for the panels built
787          around the Orise Technology OTA9601A display controller.
788
789config DRM_PANEL_ORISETECH_OTM8009A
790	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
791	depends on OF
792	depends on DRM_MIPI_DSI
793	depends on BACKLIGHT_CLASS_DEVICE
794	help
795	  Say Y here if you want to enable support for Orise Technology
796	  otm8009a 480x800 dsi 2dl panel.
797
798config DRM_PANEL_OSD_OSD101T2587_53TS
799	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
800	depends on OF
801	depends on DRM_MIPI_DSI
802	depends on BACKLIGHT_CLASS_DEVICE
803	help
804	  Say Y here if you want to enable support for One Stop Displays
805	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
806
807config DRM_PANEL_PANASONIC_VVX10F034N00
808	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
809	depends on OF
810	depends on DRM_MIPI_DSI
811	depends on BACKLIGHT_CLASS_DEVICE
812	help
813	  Say Y here if you want to enable support for Panasonic VVX10F034N00
814	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
815	  Xperia Z2 tablets
816
817config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
818	tristate "Raspberry Pi 7-inch touchscreen panel"
819	depends on DRM_MIPI_DSI
820	help
821	  Say Y here if you want to enable support for the Raspberry
822	  Pi 7" Touchscreen.  To compile this driver as a module,
823	  choose M here.
824
825config DRM_PANEL_RAYDIUM_RM67191
826	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
827	depends on OF
828	depends on DRM_MIPI_DSI
829	depends on BACKLIGHT_CLASS_DEVICE
830	help
831	  Say Y here if you want to enable support for Raydium RM67191 FHD
832	  (1080x1920) DSI panel.
833
834config DRM_PANEL_RAYDIUM_RM67200
835	tristate "Raydium RM67200-based DSI panel"
836	depends on OF
837	depends on DRM_MIPI_DSI
838	help
839	  Say Y here if you want to enable support for Raydium RM67200-based
840	  DSI video mode panels. This panel controller can be found in the
841	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
842	  evaluation boards.
843
844config DRM_PANEL_RAYDIUM_RM68200
845	tristate "Raydium RM68200 720x1280 DSI video mode panel"
846	depends on OF
847	depends on DRM_MIPI_DSI
848	depends on BACKLIGHT_CLASS_DEVICE
849	help
850	  Say Y here if you want to enable support for Raydium RM68200
851	  720x1280 DSI video mode panel.
852
853config DRM_PANEL_RAYDIUM_RM692E5
854	tristate "Raydium RM692E5-based DSI panel"
855	depends on OF
856	depends on DRM_MIPI_DSI
857	depends on BACKLIGHT_CLASS_DEVICE
858	select DRM_DISPLAY_DSC_HELPER
859	select DRM_DISPLAY_HELPER
860	help
861	  Say Y here if you want to enable support for Raydium RM692E5-based
862	  display panels, such as the one found in the Fairphone 5 smartphone.
863
864config DRM_PANEL_RAYDIUM_RM69220
865	tristate "Raydium RM69220-based DSI panel"
866	depends on OF
867	depends on DRM_MIPI_DSI
868	depends on BACKLIGHT_CLASS_DEVICE
869	select DRM_DISPLAY_DSC_HELPER
870	select DRM_DISPLAY_HELPER
871	help
872	  Say Y here if you want to enable support for Raydium RM69220-based
873	  display panels, such as the BOE BF068MWM-TD0 which can be found in
874	  the Nothing Phone (3a).
875
876	  To compile this driver as a module, choose M here: the module
877	  will be called panel-raydium-rm69220.
878
879config DRM_PANEL_RAYDIUM_RM69380
880	tristate "Raydium RM69380-based DSI panel"
881	depends on GPIOLIB
882	depends on OF
883	depends on DRM_MIPI_DSI
884	depends on BACKLIGHT_CLASS_DEVICE
885	help
886	  Say Y here if you want to enable support for Raydium RM69380-based
887	  display panels.
888
889	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
890	  in combination with an EDO OLED panel.
891
892config DRM_PANEL_RENESAS_R61307
893	tristate "Renesas R61307 DSI video mode panel"
894	depends on OF
895	depends on DRM_MIPI_DSI
896	depends on BACKLIGHT_CLASS_DEVICE
897	select VIDEOMODE_HELPERS
898	help
899	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
900	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
901	  resolution and uses 24 bit RGB per pixel.
902
903	  This panel controller can be found in LG Optimus Vu P895 smartphone
904	  in combination with LCD panel.
905
906config DRM_PANEL_RENESAS_R63419
907	tristate "Renesas R63419 dual-DSI video mode panels"
908	depends on OF && GPIOLIB
909	depends on DRM_MIPI_DSI
910	depends on BACKLIGHT_CLASS_DEVICE
911	help
912	  Say Y here if you want to enable support for Ayaneo WT0600 and WT0630
913	  1440x2560 60Hz dual-DSI video mode display panels with Renesas
914	  R63419 IC.
915
916	  These panels are used in Ayaneo handheld gaming devices.
917
918config DRM_PANEL_RENESAS_R69328
919	tristate "Renesas R69328 720x1280 DSI video mode panel"
920	depends on OF
921	depends on DRM_MIPI_DSI
922	depends on BACKLIGHT_CLASS_DEVICE
923	select VIDEOMODE_HELPERS
924	help
925	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
926	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
927	  resolution and uses 24 bit RGB per pixel.
928
929	  This panel controller can be found in LG Optimus 4X P895 smartphone
930	  in combination with LCD panel.
931
932config DRM_PANEL_RONBO_RB070D30
933	tristate "Ronbo Electronics RB070D30 panel"
934	depends on OF
935	depends on DRM_MIPI_DSI
936	depends on BACKLIGHT_CLASS_DEVICE
937	help
938	  Say Y here if you want to enable support for Ronbo Electronics
939	  RB070D30 1024x600 DSI panel.
940
941config DRM_PANEL_SAMSUNG_AMS581VF01
942	tristate "Samsung AMS581VF01 panel"
943	depends on OF
944	depends on DRM_MIPI_DSI
945	depends on BACKLIGHT_CLASS_DEVICE
946	help
947	  Say Y or M here if you want to enable support for the
948	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
949
950config DRM_PANEL_SAMSUNG_AMS639RQ08
951	tristate "Samsung AMS639RQ08 panel"
952	depends on OF
953	depends on DRM_MIPI_DSI
954	depends on BACKLIGHT_CLASS_DEVICE
955	help
956	  Say Y or M here if you want to enable support for the
957	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
958
959config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
960	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
961	depends on GPIOLIB && OF && REGULATOR
962	depends on DRM_MIPI_DSI
963	depends on BACKLIGHT_CLASS_DEVICE
964	help
965	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
966	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
967	  GT-I9195I). To compile this driver as a module, choose M here.
968
969config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
970	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
971	depends on OF
972	select DRM_MIPI_DSI
973	select VIDEOMODE_HELPERS
974
975config DRM_PANEL_SAMSUNG_ATNA33XC20
976	tristate "Samsung ATNA33XC20 eDP panel"
977	depends on OF
978	depends on BACKLIGHT_CLASS_DEVICE
979	depends on PM
980	select DRM_DISPLAY_DP_HELPER
981	select DRM_DISPLAY_HELPER
982	select DRM_DISPLAY_DP_AUX_BUS
983	help
984	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
985	  be handled by the DRM_PANEL_SIMPLE driver because its power
986	  sequencing is non-standard.
987
988config DRM_PANEL_SAMSUNG_DB7430
989	tristate "Samsung DB7430-based DPI panels"
990	depends on OF && SPI && GPIOLIB
991	depends on BACKLIGHT_CLASS_DEVICE
992	select DRM_MIPI_DBI
993	help
994	  Say Y here if you want to enable support for the Samsung
995	  DB7430 DPI display controller used in such devices as the
996	  LMS397KF04 480x800 DPI panel.
997
998config DRM_PANEL_SAMSUNG_LD9040
999	tristate "Samsung LD9040 RGB/SPI panel"
1000	depends on OF && SPI
1001	depends on BACKLIGHT_CLASS_DEVICE
1002	select VIDEOMODE_HELPERS
1003
1004config DRM_PANEL_SAMSUNG_LTL106HL02
1005	tristate "Samsung LTL106HL02 panel"
1006	depends on OF
1007	depends on DRM_MIPI_DSI
1008	depends on BACKLIGHT_CLASS_DEVICE
1009	select VIDEOMODE_HELPERS
1010	help
1011	  Say Y here if you want to enable support for the Samsung LTL106HL02
1012	  panel driver which is used in Microsoft Surface 2.
1013
1014	  To compile this driver as a module, choose M here: the module
1015	  will be called panel-samsung-ltl106hl02.
1016
1017config DRM_PANEL_SAMSUNG_S6E3FA7
1018	tristate "Samsung S6E3FA7 panel driver"
1019	depends on OF
1020	depends on DRM_MIPI_DSI
1021	depends on BACKLIGHT_CLASS_DEVICE
1022	help
1023	  Say Y here if you want to enable support for the Samsung S6E3FA7
1024	  1920x2220 panel.
1025
1026config DRM_PANEL_SAMSUNG_S6D16D0
1027	tristate "Samsung S6D16D0 DSI video mode panel"
1028	depends on OF
1029	depends on DRM_MIPI_DSI
1030	select VIDEOMODE_HELPERS
1031
1032config DRM_PANEL_SAMSUNG_S6D27A1
1033	tristate "Samsung S6D27A1 DPI panel driver"
1034	depends on OF && SPI && GPIOLIB
1035	select DRM_MIPI_DBI
1036	help
1037	  Say Y here if you want to enable support for the Samsung
1038	  S6D27A1 DPI 480x800 panel.
1039
1040	  This panel can be found in Samsung Galaxy Ace 2
1041	  GT-I8160 mobile phone.
1042
1043config DRM_PANEL_SAMSUNG_S6D7AA0
1044	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
1045	depends on OF
1046	depends on BACKLIGHT_CLASS_DEVICE
1047	select DRM_MIPI_DSI
1048	select VIDEOMODE_HELPERS
1049
1050config DRM_PANEL_SAMSUNG_S6E3FC2X01
1051	tristate "Samsung S6E3FC2X01 DSI panel controller"
1052	depends on GPIOLIB
1053	depends on OF
1054	depends on DRM_MIPI_DSI
1055	depends on BACKLIGHT_CLASS_DEVICE
1056	help
1057	  Say Y or M here if you want to enable support for the
1058	  Samsung S6E3FC2 DDIC and connected MIPI DSI panel.
1059	  Currently supported panels:
1060
1061	    Samsung AMS641RW (found in the OnePlus 6T smartphone)
1062
1063config DRM_PANEL_SAMSUNG_S6E3HA2
1064	tristate "Samsung S6E3HA2 DSI video mode panel"
1065	depends on OF
1066	depends on DRM_MIPI_DSI
1067	depends on BACKLIGHT_CLASS_DEVICE
1068	select VIDEOMODE_HELPERS
1069
1070config DRM_PANEL_SAMSUNG_S6E3HA8
1071	tristate "Samsung S6E3HA8 DSI video mode panel"
1072	depends on GPIOLIB
1073	depends on OF
1074	depends on DRM_MIPI_DSI
1075	depends on BACKLIGHT_CLASS_DEVICE
1076	select DRM_DISPLAY_HELPER
1077	select DRM_DISPLAY_DSC_HELPER
1078	help
1079	  Say Y or M here if you want to enable support for the
1080	  Samsung S6E3HA8 DDIC and connected MIPI DSI panel.
1081	  Currently supported panels:
1082
1083	    Samsung AMB577PX01 (found in the Samsung S9 smartphone)
1084
1085
1086config DRM_PANEL_SAMSUNG_S6E63J0X03
1087	tristate "Samsung S6E63J0X03 DSI command mode panel"
1088	depends on OF
1089	depends on DRM_MIPI_DSI
1090	depends on BACKLIGHT_CLASS_DEVICE
1091	select VIDEOMODE_HELPERS
1092
1093config DRM_PANEL_SAMSUNG_S6E63M0
1094	tristate "Samsung S6E63M0 RGB panel"
1095	depends on OF
1096	depends on BACKLIGHT_CLASS_DEVICE
1097	help
1098	  Say Y here if you want to enable support for Samsung S6E63M0
1099	  AMOLED LCD panel. This panel can be accessed using SPI or
1100	  DSI.
1101
1102config DRM_PANEL_SAMSUNG_S6E63M0_SPI
1103	tristate "Samsung S6E63M0 RGB SPI interface"
1104	depends on SPI
1105	depends on DRM_PANEL_SAMSUNG_S6E63M0
1106	default DRM_PANEL_SAMSUNG_S6E63M0
1107	select DRM_MIPI_DBI
1108	help
1109	  Say Y here if you want to be able to access the Samsung
1110	  S6E63M0 panel using SPI.
1111
1112config DRM_PANEL_SAMSUNG_S6E63M0_DSI
1113	tristate "Samsung S6E63M0 RGB DSI interface"
1114	depends on DRM_MIPI_DSI
1115	depends on DRM_PANEL_SAMSUNG_S6E63M0
1116	help
1117	  Say Y here if you want to be able to access the Samsung
1118	  S6E63M0 panel using DSI.
1119
1120config DRM_PANEL_SAMSUNG_S6E8AA0
1121	tristate "Samsung S6E8AA0 DSI video mode panel"
1122	depends on OF
1123	select DRM_MIPI_DSI
1124	select VIDEOMODE_HELPERS
1125
1126config DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01
1127	tristate "Samsung AMS561RA01 panel with S6E8AA5X01 controller"
1128	depends on GPIOLIB && OF && REGULATOR
1129	depends on DRM_MIPI_DSI
1130	depends on BACKLIGHT_CLASS_DEVICE
1131	help
1132	  Say Y here if you want to enable support for Samsung AMS561RA01
1133	  panel, which uses Samsung's S6E8AA5X01 controller. The panel has a
1134	  ~5.6 inch AMOLED display, and the controller is driven by the MIPI
1135	  DSI protocol with 4 lanes.
1136
1137config DRM_PANEL_SAMSUNG_S6E8FC0
1138	tristate "Samsung S6E8FC0 DSI controller"
1139	depends on OF
1140	depends on BACKLIGHT_CLASS_DEVICE
1141	select DRM_MIPI_DSI
1142	help
1143	  Say Y or M here if you want to enable support for the Samsung
1144	  S6E8FC0 DSI controller and connected panel.
1145	  Currently supported panels:
1146
1147	    M1906F9 (M1906F9SH or M1906F9SI), 6.09 inch 720x1560, found
1148	    in the Xiaomi Mi A3 smartphone (xiaomi-laurel).
1149
1150config DRM_PANEL_SAMSUNG_SOFEF00
1151	tristate "Samsung SOFEF00 DSI panel controller"
1152	depends on GPIOLIB
1153	depends on OF
1154	depends on DRM_MIPI_DSI
1155	depends on BACKLIGHT_CLASS_DEVICE
1156	help
1157	  Say Y or M here if you want to enable support for the Samsung AMOLED
1158	  panel SOFEF00 DDIC and connected panel.
1159	  Currently supported panels:
1160
1161	    Samsung AMS628NW01 (found in OnePlus 6, 1080x2280@60Hz)
1162
1163config DRM_PANEL_SEIKO_43WVF1G
1164	tristate "Seiko 43WVF1G panel"
1165	depends on OF
1166	depends on BACKLIGHT_CLASS_DEVICE
1167	select VIDEOMODE_HELPERS
1168	help
1169	  Say Y here if you want to enable support for the Seiko
1170	  43WVF1G controller for 800x480 LCD panels
1171
1172config DRM_PANEL_SHARP_LQ079L1SX01
1173	tristate "Sharp LQ079L1SX01 panel"
1174	depends on OF
1175	depends on DRM_MIPI_DSI
1176	depends on BACKLIGHT_CLASS_DEVICE
1177	select VIDEOMODE_HELPERS
1178	help
1179	  Say Y here if you want to enable support for Sharp LQ079L1SX01
1180	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1181	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1182	  the host.
1183
1184	  To compile this driver as a module, choose M here: the module
1185	  will be called panel-sharp-lq079l1sx01.
1186
1187config DRM_PANEL_SHARP_LQ101R1SX01
1188	tristate "Sharp LQ101R1SX01 panel"
1189	depends on OF
1190	depends on DRM_MIPI_DSI
1191	depends on BACKLIGHT_CLASS_DEVICE
1192	help
1193	  Say Y here if you want to enable support for Sharp LQ101R1SX01
1194	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1195	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1196	  the host and has a built-in LED backlight.
1197
1198	  To compile this driver as a module, choose M here: the module
1199	  will be called panel-sharp-lq101r1sx01.
1200
1201config DRM_PANEL_SHARP_LS037V7DW01
1202	tristate "Sharp LS037V7DW01 VGA LCD panel"
1203	depends on GPIOLIB && OF && REGULATOR
1204	help
1205	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
1206	  (480x640) LCD panel (found on the TI SDP3430 board).
1207
1208config DRM_PANEL_SHARP_LS043T1LE01
1209	tristate "Sharp LS043T1LE01 qHD video mode panel"
1210	depends on OF
1211	depends on DRM_MIPI_DSI
1212	depends on BACKLIGHT_CLASS_DEVICE
1213	help
1214	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
1215	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
1216
1217config DRM_PANEL_SHARP_LS060T1SX01
1218	tristate "Sharp LS060T1SX01 FullHD video mode panel"
1219	depends on OF
1220	depends on DRM_MIPI_DSI
1221	depends on BACKLIGHT_CLASS_DEVICE
1222	help
1223	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
1224	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
1225	  Bundle.
1226
1227config DRM_PANEL_SITRONIX_ST7701
1228	tristate "Sitronix ST7701 panel driver"
1229	depends on OF
1230	depends on SPI || DRM_MIPI_DSI
1231	select DRM_MIPI_DBI if SPI
1232	depends on BACKLIGHT_CLASS_DEVICE
1233	help
1234	  Say Y here if you want to enable support for the Sitronix
1235	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
1236	  system interfaces.
1237
1238config DRM_PANEL_SITRONIX_ST7703
1239	tristate "Sitronix ST7703 based MIPI touchscreen panels"
1240	depends on OF
1241	depends on DRM_MIPI_DSI
1242	depends on BACKLIGHT_CLASS_DEVICE
1243	help
1244	  Say Y here if you want to enable support for Sitronix ST7703 based
1245	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
1246	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
1247	  in backlight and touch controller.
1248	  Touch input support is provided by the goodix driver and needs to be
1249	  selected separately.
1250
1251config DRM_PANEL_SITRONIX_ST7789V
1252	tristate "Sitronix ST7789V panel"
1253	depends on OF && SPI
1254	depends on BACKLIGHT_CLASS_DEVICE
1255	help
1256	  Say Y here if you want to enable support for the Sitronix
1257	  ST7789V controller for 240x320 LCD panels
1258
1259config DRM_PANEL_SONY_ACX565AKM
1260	tristate "Sony ACX565AKM panel"
1261	depends on GPIOLIB && OF && SPI
1262	depends on BACKLIGHT_CLASS_DEVICE
1263	help
1264	  Say Y here if you want to enable support for the Sony ACX565AKM
1265	  800x600 3.5" panel (found on the Nokia N900).
1266
1267config DRM_PANEL_SONY_TD4353_JDI
1268	tristate "Sony TD4353 JDI panel"
1269	depends on GPIOLIB && OF
1270	depends on DRM_MIPI_DSI
1271	depends on BACKLIGHT_CLASS_DEVICE
1272	help
1273	  Say Y here if you want to enable support for the Sony Tama
1274	  TD4353 JDI command mode panel as found on some Sony Xperia
1275	  XZ2 and XZ2 Compact smartphones.
1276
1277config DRM_PANEL_SONY_TULIP_TRULY_NT35521
1278	tristate "Sony Tulip Truly NT35521 panel"
1279	depends on GPIOLIB && OF
1280	depends on DRM_MIPI_DSI
1281	depends on BACKLIGHT_CLASS_DEVICE
1282	help
1283	  Say Y here if you want to enable support for the Sony Tulip
1284	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
1285	  Aqua phone.
1286
1287config DRM_PANEL_STARTEK_KD070FHFID015
1288	tristate "STARTEK KD070FHFID015 panel"
1289	depends on OF
1290	depends on DRM_MIPI_DSI
1291	depends on BACKLIGHT_CLASS_DEVICE
1292	help
1293	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
1294	  based on RENESAS-R69429 controller. The panel is a 7-inch TFT LCD display
1295	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
1296	  the host, a built-in LED backlight and touch controller.
1297
1298config DRM_PANEL_EDP
1299	tristate "support for simple Embedded DisplayPort panels"
1300	depends on OF
1301	depends on BACKLIGHT_CLASS_DEVICE
1302	depends on PM
1303	select VIDEOMODE_HELPERS
1304	select DRM_DISPLAY_DP_HELPER
1305	select DRM_DISPLAY_HELPER
1306	select DRM_DISPLAY_DP_AUX_BUS
1307	select DRM_KMS_HELPER
1308	help
1309	  DRM panel driver for dumb eDP panels that need at most a regulator and
1310	  a GPIO to be powered up. Optionally a backlight can be attached so
1311	  that it can be automatically turned off when the panel goes into a
1312	  low power state.
1313
1314config DRM_PANEL_SIMPLE
1315	tristate "support for simple panels (other than eDP ones)"
1316	depends on OF
1317	depends on BACKLIGHT_CLASS_DEVICE
1318	depends on PM
1319	select VIDEOMODE_HELPERS
1320	help
1321	  DRM panel driver for dumb non-eDP panels that need at most a regulator
1322	  and a GPIO to be powered up. Optionally a backlight can be attached so
1323	  that it can be automatically turned off when the panel goes into a
1324	  low power state.
1325
1326config DRM_PANEL_SUMMIT
1327	tristate "Apple Summit display panel"
1328	depends on OF
1329	depends on DRM_MIPI_DSI
1330	depends on BACKLIGHT_CLASS_DEVICE
1331	help
1332	  Say Y if you want to enable support for the "Summit" display panel
1333	  used as a touchbar on certain Apple laptops.
1334
1335config DRM_PANEL_SYNAPTICS_R63353
1336	tristate "Synaptics R63353-based panels"
1337	depends on OF
1338	depends on DRM_MIPI_DSI
1339	depends on BACKLIGHT_CLASS_DEVICE
1340	help
1341	  Say Y if you want to enable support for panels based on the
1342	  Synaptics R63353 controller.
1343
1344config DRM_PANEL_SYNAPTICS_TDDI
1345	tristate "Synaptics TDDI display panels"
1346	depends on OF
1347	depends on DRM_MIPI_DSI
1348	depends on BACKLIGHT_CLASS_DEVICE
1349	help
1350	  Say Y if you want to enable support for the Synaptics TDDI display
1351	  panels. There are multiple MIPI DSI panels manufactured under the TDDI
1352	  namesake, with varying resolutions and data lanes. They also have a
1353	  built-in LED backlight and a touch controller.
1354
1355config DRM_PANEL_TDO_TL070WSH30
1356	tristate "TDO TL070WSH30 DSI panel"
1357	depends on OF
1358	depends on DRM_MIPI_DSI
1359	depends on BACKLIGHT_CLASS_DEVICE
1360	help
1361	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1362	  panel module. The panel has a 1024×600 resolution and uses
1363	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1364	  the host, a built-in LED backlight and touch controller.
1365
1366config DRM_PANEL_TPO_TD028TTEC1
1367	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1368	depends on OF && SPI
1369	depends on BACKLIGHT_CLASS_DEVICE
1370	help
1371	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1372	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1373
1374config DRM_PANEL_TPO_TD043MTEA1
1375	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1376	depends on GPIOLIB && OF && REGULATOR && SPI
1377	help
1378	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1379	  4.3" panel (found on the OMAP3 Pandora board).
1380
1381config DRM_PANEL_TPO_TPG110
1382	tristate "TPO TPG 800x400 panel"
1383	depends on OF && SPI && GPIOLIB
1384	depends on BACKLIGHT_CLASS_DEVICE
1385	help
1386	  Say Y here if you want to enable support for TPO TPG110
1387	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1388	  800x400 LCD panels.
1389
1390config DRM_PANEL_TRULY_NT35597_WQXGA
1391	tristate "Truly WQXGA"
1392	depends on OF
1393	depends on DRM_MIPI_DSI
1394	help
1395	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1396	  Video Mode panel
1397
1398config DRM_PANEL_VISIONOX_G2647FB105
1399	tristate "Visionox G2647FB105"
1400	depends on OF
1401	depends on DRM_MIPI_DSI
1402	depends on BACKLIGHT_CLASS_DEVICE
1403	help
1404	  Say Y here if you want to enable support for the Visionox
1405	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1406
1407config DRM_PANEL_VISIONOX_R66451
1408	tristate "Visionox R66451"
1409	depends on OF
1410	depends on DRM_MIPI_DSI
1411	depends on BACKLIGHT_CLASS_DEVICE
1412	select DRM_DISPLAY_DSC_HELPER
1413	select DRM_DISPLAY_HELPER
1414	help
1415	  Say Y here if you want to enable support for Visionox
1416	  R66451 1080x2340 AMOLED DSI panel.
1417
1418config DRM_PANEL_VISIONOX_RM69299
1419	tristate "Visionox RM69299"
1420	depends on GPIOLIB
1421	depends on OF
1422	depends on DRM_MIPI_DSI
1423	depends on BACKLIGHT_CLASS_DEVICE
1424	help
1425	  Say Y here if you want to enable support for Visionox
1426	  RM69299  DSI Video Mode panel.
1427
1428config DRM_PANEL_VISIONOX_RM692E5
1429	tristate "Visionox RM692E5"
1430	depends on OF
1431	depends on DRM_MIPI_DSI
1432	depends on BACKLIGHT_CLASS_DEVICE
1433	select DRM_DISPLAY_DSC_HELPER
1434	select DRM_DISPLAY_HELPER
1435	help
1436	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1437	  display panels, such as the one found in the Nothing Phone (1)
1438	  smartphone.
1439
1440config DRM_PANEL_VISIONOX_VTDR6130
1441	tristate "Visionox VTDR6130"
1442	depends on OF
1443	depends on DRM_MIPI_DSI
1444	depends on BACKLIGHT_CLASS_DEVICE
1445	select DRM_DISPLAY_DSC_HELPER
1446	select DRM_DISPLAY_HELPER
1447	help
1448	  Say Y here if you want to enable support for Visionox
1449	  VTDR6130 1080x2400 AMOLED DSI panel.
1450
1451config DRM_PANEL_WIDECHIPS_WS2401
1452	tristate "Widechips WS2401 DPI panel driver"
1453	depends on SPI && GPIOLIB
1454	depends on BACKLIGHT_CLASS_DEVICE
1455	select DRM_MIPI_DBI
1456	help
1457	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1458	  480x800 display controller used in panels such as Samsung LMS380KF01.
1459	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1460
1461config DRM_PANEL_XINPENG_XPP055C272
1462	tristate "Xinpeng XPP055C272 panel driver"
1463	depends on OF
1464	depends on DRM_MIPI_DSI
1465	depends on BACKLIGHT_CLASS_DEVICE
1466	help
1467	  Say Y here if you want to enable support for the Xinpeng
1468	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1469	  system interfaces.
1470endmenu
1471