xref: /linux/drivers/gpu/drm/panel/Kconfig (revision c06b6cde2a1c3bcbb561bd57bb6f34eae9030921) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TD4320
71	tristate "BOE TD4320 DSI panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for BOE TD4320 1080x2340
77	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
78
79config DRM_PANEL_BOE_TH101MB31UIG002_28A
80	tristate "Boe TH101MB31UIG002-28A panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for Boe
86	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
87	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
88	  interface to the host and has a built-in LED backlight.
89
90config DRM_PANEL_BOE_TV101WUM_NL6
91	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
97	  45NA WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_BOE_TV101WUM_LL2
100	tristate "BOE TV101WUM LL2 1200x1920 panel"
101	depends on OF
102	depends on DRM_MIPI_DSI
103	depends on BACKLIGHT_CLASS_DEVICE
104	help
105	  Say Y here if you want to support for BOE TV101WUM-LL2
106	  WUXGA PANEL DSI Video Mode panel
107
108config DRM_PANEL_CHIPWEALTH_CH13726A
109	tristate "CHIPWEALTH CH13726A-based DSI panel"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	select DRM_DISPLAY_DP_HELPER
114	select DRM_DISPLAY_HELPER
115	help
116	  Say Y here if you want to enable support for ChipWealth
117	  CH13726A-based display panels.
118
119config DRM_PANEL_EBBG_FT8719
120	tristate "EBBG FT8719 panel driver"
121	depends on GPIOLIB
122	depends on OF
123	depends on DRM_MIPI_DSI
124	depends on BACKLIGHT_CLASS_DEVICE
125	help
126	  Say Y here if you want to enable support for the EBBG FT8719
127	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
128	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
129	  interface to the host.
130
131config DRM_PANEL_ELIDA_KD35T133
132	tristate "Elida KD35T133 panel driver"
133	depends on OF
134	depends on DRM_MIPI_DSI
135	depends on BACKLIGHT_CLASS_DEVICE
136	help
137	  Say Y here if you want to enable support for the Elida
138	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
139	  system interfaces.
140
141config DRM_PANEL_FEIXIN_K101_IM2BA02
142	tristate "Feixin K101 IM2BA02 panel"
143	depends on OF
144	depends on DRM_MIPI_DSI
145	depends on BACKLIGHT_CLASS_DEVICE
146	help
147	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
148	  4-lane 800x1280 MIPI DSI panel.
149
150config DRM_PANEL_FEIYANG_FY07024DI26A30D
151	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
152	depends on OF
153	depends on DRM_MIPI_DSI
154	depends on BACKLIGHT_CLASS_DEVICE
155	help
156	  Say Y if you want to enable support for panels based on the
157	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
158
159config DRM_PANEL_FOCALTECH_OTA7290B
160	tristate "Focaltech OTA7290B"
161	depends on DRM_MIPI_DSI
162	depends on I2C
163	depends on BACKLIGHT_CLASS_DEVICE
164	select DRM_KMS_HELPER
165	help
166	  Enable support for panels using OTA7290B as a controller (for
167	  example, Waveshare 12.3" DSI TOUCH-A panel). Say Y here if you want
168	  to enable support for this panel. To compile this driver as a module,
169	  choose M here.
170
171config DRM_PANEL_DSI_CM
172	tristate "Generic DSI command mode panels"
173	depends on OF
174	depends on DRM_MIPI_DSI
175	depends on BACKLIGHT_CLASS_DEVICE
176	help
177	  DRM panel driver for DSI command mode panels with support for
178	  embedded and external backlights.
179
180config DRM_PANEL_LVDS
181	tristate "Generic LVDS panel driver"
182	depends on OF
183	depends on BACKLIGHT_CLASS_DEVICE
184	select VIDEOMODE_HELPERS
185	help
186	  This driver supports LVDS panels that don't require device-specific
187	  handling of power supplies or control signals. It implements automatic
188	  backlight handling if the panel is attached to a backlight controller.
189
190config DRM_PANEL_HIMAX_HX8279
191	tristate "Himax HX8279-based panels"
192	depends on OF
193	depends on DRM_MIPI_DSI
194	depends on BACKLIGHT_CLASS_DEVICE
195	help
196	  Say Y if you want to enable support for panels based on the
197	  Himax HX8279 controller, such as the Startek KD070FHFID078
198	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
199	  and others.
200
201config DRM_PANEL_HIMAX_HX83102
202	tristate "Himax HX83102-based panels"
203	depends on OF
204	depends on DRM_MIPI_DSI
205	depends on BACKLIGHT_CLASS_DEVICE
206	help
207	  Say Y if you want to enable support for panels based on the
208	  Himax HX83102 controller.
209
210config DRM_PANEL_HIMAX_HX83112A
211	tristate "Himax HX83112A-based DSI panel"
212	depends on OF
213	depends on DRM_MIPI_DSI
214	depends on BACKLIGHT_CLASS_DEVICE
215	select DRM_KMS_HELPER
216	help
217	  Say Y here if you want to enable support for Himax HX83112A-based
218	  display panels, such as the one found in the Fairphone 4 smartphone.
219
220config DRM_PANEL_HIMAX_HX83112B
221	tristate "Himax HX83112B-based DSI panel"
222	depends on OF
223	depends on DRM_MIPI_DSI
224	depends on BACKLIGHT_CLASS_DEVICE
225	select DRM_KMS_HELPER
226	help
227	  Say Y here if you want to enable support for Himax HX83112B-based
228	  display panels, such as the one found in the Fairphone 3 smartphone.
229
230config DRM_PANEL_HIMAX_HX83121A
231	tristate "Himax HX83121A-based DSI panel"
232	depends on OF
233	depends on DRM_MIPI_DSI
234	depends on BACKLIGHT_CLASS_DEVICE
235	select DRM_KMS_HELPER
236	help
237	  Say Y here if you want to enable support for Himax HX83121A-based
238	  display panels, such as the one found in the HUAWEI Matebook E Go
239          series.
240
241config DRM_PANEL_HIMAX_HX8394
242	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
243	depends on OF
244	depends on DRM_MIPI_DSI
245	depends on BACKLIGHT_CLASS_DEVICE
246	help
247	  Say Y if you want to enable support for panels based on the
248	  Himax HX8394 controller, such as the HannStar HSD060BHW4
249	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
250
251	  If M is selected the module will be called panel-himax-hx8394.
252
253config DRM_PANEL_HYDIS_HV101HD1
254	tristate "Hydis HV101HD1 panel"
255	depends on OF
256	depends on DRM_MIPI_DSI
257	depends on BACKLIGHT_CLASS_DEVICE
258	help
259	  Say Y here if you want to enable support for the Hydis HV101HD1
260	  2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT TF600T.
261	  HV101HD1 is a color active matrix TFT LCD module using amorphous
262	  silicon TFT's (Thin Film Transistors) as an active switching devices.
263
264	  If M is selected the module will be called panel-hydis-hv101hd1
265
266config DRM_PANEL_ILITEK_IL9322
267	tristate "Ilitek ILI9322 320x240 QVGA panels"
268	depends on OF && SPI
269	select REGMAP
270	help
271	  Say Y here if you want to enable support for Ilitek IL9322
272	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
273
274config DRM_PANEL_ILITEK_ILI9341
275	tristate "Ilitek ILI9341 240x320 QVGA panels"
276	depends on SPI
277	select DRM_KMS_HELPER
278	select DRM_GEM_DMA_HELPER
279	depends on BACKLIGHT_CLASS_DEVICE
280	select DRM_MIPI_DBI
281	help
282	  Say Y here if you want to enable support for Ilitek IL9341
283	  QVGA (240x320) RGB panels. support serial & parallel rgb
284	  interface.
285
286config DRM_PANEL_ILITEK_ILI9805
287	tristate "Ilitek ILI9805-based panels"
288	depends on OF
289	depends on DRM_MIPI_DSI
290	depends on BACKLIGHT_CLASS_DEVICE
291	help
292	  Say Y if you want to enable support for panels based on the
293	  Ilitek ILI9805 controller.
294
295config DRM_PANEL_ILITEK_ILI9806E_CORE
296	tristate
297
298config DRM_PANEL_ILITEK_ILI9806E_DSI
299	tristate "Ilitek ILI9806E-based DSI panels"
300	depends on OF
301	depends on DRM_MIPI_DSI
302	depends on BACKLIGHT_CLASS_DEVICE
303	select DRM_PANEL_ILITEK_ILI9806E_CORE
304	help
305	  Say Y if you want to enable support for panels based on the
306	  Ilitek ILI9806E controller using DSI.
307
308config DRM_PANEL_ILITEK_ILI9806E_SPI
309	tristate "Ilitek ILI9806E-based RGB SPI panel"
310	depends on OF
311	depends on SPI
312	depends on BACKLIGHT_CLASS_DEVICE
313	select DRM_MIPI_DBI
314	select VIDEOMODE_HELPERS
315	select DRM_PANEL_ILITEK_ILI9806E_CORE
316	help
317	  Say Y if you want to enable support for panels based on the
318	  Ilitek ILI9806E controller using SPI.
319
320config DRM_PANEL_ILITEK_ILI9881C
321	tristate "Ilitek ILI9881C-based panels"
322	depends on OF
323	depends on DRM_MIPI_DSI
324	depends on BACKLIGHT_CLASS_DEVICE
325	help
326	  Say Y if you want to enable support for panels based on the
327	  Ilitek ILI9881c controller.
328
329config DRM_PANEL_ILITEK_ILI9882T
330	tristate "Ilitek ILI9882t-based panels"
331	depends on OF
332	depends on DRM_MIPI_DSI
333	depends on BACKLIGHT_CLASS_DEVICE
334	select DRM_DISPLAY_DSC_HELPER
335	help
336	  Say Y if you want to enable support for panels based on the
337	  Ilitek ILI9882t controller.
338
339config DRM_PANEL_INNOLUX_EJ030NA
340        tristate "Innolux EJ030NA 320x480 LCD panel"
341        depends on OF && SPI
342        select REGMAP_SPI
343        help
344          Say Y here to enable support for the Innolux/Chimei EJ030NA
345          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
346          and LDK handheld gaming consoles.
347
348config DRM_PANEL_INNOLUX_P079ZCA
349	tristate "Innolux P079ZCA panel"
350	depends on OF
351	depends on DRM_MIPI_DSI
352	depends on BACKLIGHT_CLASS_DEVICE
353	help
354	  Say Y here if you want to enable support for Innolux P079ZCA
355	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
356	  24 bit RGB per pixel. It provides a MIPI DSI interface to
357	  the host and has a built-in LED backlight.
358
359config DRM_PANEL_JADARD_JD9365DA_H3
360	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
361	depends on OF
362	depends on DRM_MIPI_DSI
363	depends on BACKLIGHT_CLASS_DEVICE
364	select DRM_KMS_HELPER
365	help
366	  Say Y here if you want to enable support for Jadard JD9365DA-H3
367	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
368	  800RGBx1280 dots at maximum.
369
370config DRM_PANEL_JDI_LPM102A188A
371	tristate "JDI LPM102A188A DSI panel"
372	depends on GPIOLIB
373	depends on OF
374	depends on DRM_MIPI_DSI
375	depends on BACKLIGHT_CLASS_DEVICE
376	help
377	  Say Y here if you want to enable support for JDI LPM102A188A DSI
378	  command mode panel as found in Google Pixel C devices.
379	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
380	  to the host.
381
382config DRM_PANEL_JDI_LT070ME05000
383	tristate "JDI LT070ME05000 WUXGA DSI panel"
384	depends on OF
385	depends on DRM_MIPI_DSI
386	depends on BACKLIGHT_CLASS_DEVICE
387	help
388	  Say Y here if you want to enable support for JDI DSI video mode
389	  panel as found in Google Nexus 7 (2013) devices.
390	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
391	  24 bit per pixel.
392
393config DRM_PANEL_JDI_R63452
394	tristate "JDI R63452 Full HD DSI panel"
395	depends on OF
396	depends on DRM_MIPI_DSI
397	depends on BACKLIGHT_CLASS_DEVICE
398	help
399	  Say Y here if you want to enable support for the JDI R63452
400	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
401
402config DRM_PANEL_KHADAS_TS050
403	tristate "Khadas TS050 panel"
404	depends on OF
405	depends on DRM_MIPI_DSI
406	depends on BACKLIGHT_CLASS_DEVICE
407	help
408	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
409	  panel module. The panel has a 1080x1920 resolution and uses
410	  24 bit RGB per pixel. It provides a MIPI DSI interface to
411	  the host, a built-in LED backlight and touch controller.
412
413config DRM_PANEL_KINGDISPLAY_KD097D04
414	tristate "Kingdisplay kd097d04 panel"
415	depends on OF
416	depends on DRM_MIPI_DSI
417	depends on BACKLIGHT_CLASS_DEVICE
418	help
419	  Say Y here if you want to enable support for Kingdisplay kd097d04
420	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
421	  24 bit RGB per pixel. It provides a MIPI DSI interface to
422	  the host and has a built-in LED backlight.
423
424config DRM_PANEL_LEADTEK_LTK050H3146W
425	tristate "Leadtek LTK050H3146W panel"
426	depends on OF
427	depends on DRM_MIPI_DSI
428	depends on BACKLIGHT_CLASS_DEVICE
429	help
430	  Say Y here if you want to enable support for Leadtek LTK050H3146W
431	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
432	  24 bit RGB per pixel. It provides a MIPI DSI interface to
433	  the host and has a built-in LED backlight.
434
435config DRM_PANEL_LEADTEK_LTK500HD1829
436	tristate "Leadtek LTK500HD1829 panel"
437	depends on OF
438	depends on DRM_MIPI_DSI
439	depends on BACKLIGHT_CLASS_DEVICE
440	help
441	  Say Y here if you want to enable support for Kingdisplay kd097d04
442	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
443	  24 bit RGB per pixel. It provides a MIPI DSI interface to
444	  the host and has a built-in LED backlight.
445
446config DRM_PANEL_LINCOLNTECH_LCD197
447	tristate "Lincoln Technologies lcd197 panel"
448	depends on OF
449	depends on DRM_MIPI_DSI
450	depends on BACKLIGHT_CLASS_DEVICE
451	help
452	  Say Y here if you want to enable support for lincolntech lcd197
453	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
454	  24 bit RGB per pixel. It provides a MIPI DSI interface to
455	  the host.
456
457config DRM_PANEL_LG_LB035Q02
458	tristate "LG LB035Q024573 RGB panel"
459	depends on GPIOLIB && OF && SPI
460	help
461	  Say Y here if you want to enable support for the LB035Q02 RGB panel
462	  (found on the Gumstix Overo Palo35 board). To compile this driver as
463	  a module, choose M here.
464
465config DRM_PANEL_LG_LD070WX3
466	tristate "LG LD070WX3 MIPI DSI panel"
467	depends on OF
468	depends on DRM_MIPI_DSI
469	depends on BACKLIGHT_CLASS_DEVICE
470	select VIDEOMODE_HELPERS
471	help
472	  Say Y here if you want to enable support for the LD070WX3 MIPI DSI
473	  panel found in the NVIDIA Tegra Note 7 tablet.
474
475	  To compile this driver as a module, choose M here: the module will
476	  be called panel-lg-ld070wx3.
477
478config DRM_PANEL_LG_LG4573
479	tristate "LG4573 RGB/SPI panel"
480	depends on OF && SPI
481	select VIDEOMODE_HELPERS
482	help
483	  Say Y here if you want to enable support for LG4573 RGB panel.
484	  To compile this driver as a module, choose M here.
485
486config DRM_PANEL_LG_SW43408
487	tristate "LG SW43408 panel"
488	depends on GPIOLIB
489	depends on OF
490	depends on DRM_MIPI_DSI
491	depends on BACKLIGHT_CLASS_DEVICE
492	select DRM_DISPLAY_DSC_HELPER
493	select DRM_DISPLAY_HELPER
494	help
495	  Say Y here if you want to enable support for LG sw43408 panel.
496	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
497	  pixel. It provides a MIPI DSI interface to the host and has a
498	  built-in LED backlight.
499
500config DRM_PANEL_LXD_M9189A
501	tristate "LXD M9189A MIPI-DSI LCD panel"
502	depends on OF
503	depends on DRM_MIPI_DSI
504	depends on BACKLIGHT_CLASS_DEVICE
505	help
506	  Say Y if you want to enable support for the LXD M9189A 4-Lane
507	  1024x600 MIPI DSI panel.
508
509config DRM_PANEL_MAGNACHIP_D53E6EA8966
510	tristate "Magnachip D53E6EA8966 DSI panel"
511	depends on OF && SPI
512	depends on DRM_MIPI_DSI
513	depends on BACKLIGHT_CLASS_DEVICE
514	select DRM_MIPI_DBI
515	help
516	  DRM panel driver for the Samsung AMS495QA01 panel controlled
517	  with the Magnachip D53E6EA8966 panel IC. This panel receives
518	  video data via DSI but commands via 9-bit SPI using DBI.
519
520config DRM_PANEL_MANTIX_MLAF057WE51
521	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
522	depends on OF
523	depends on DRM_MIPI_DSI
524	depends on BACKLIGHT_CLASS_DEVICE
525	help
526	  Say Y here if you want to enable support for the Mantix
527	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
528	  has a resolution of 720x1440 pixels, a built in backlight and touch
529	  controller.
530
531config DRM_PANEL_MOTOROLA_MOT
532	tristate "Atrix 4G and Droid X2 540x960 DSI video mode panel"
533	depends on OF
534	depends on DRM_MIPI_DSI
535	depends on BACKLIGHT_CLASS_DEVICE
536	select VIDEOMODE_HELPERS
537	help
538	  Say Y here if you want to enable support for the LCD panel module
539	  for Motorola Atrix 4G or Droid X2. Exact panel vendor and model are
540	  unknown. The panel has a 540x960 resolution and uses 24 bit RGB per
541	  pixel.
542
543config DRM_PANEL_NEC_NL8048HL11
544	tristate "NEC NL8048HL11 RGB panel"
545	depends on GPIOLIB && OF && SPI
546	help
547	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
548	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
549	  as a module, choose M here.
550
551config DRM_PANEL_NEWVISION_NV3051D
552	tristate "NewVision NV3051D DSI panel"
553	depends on OF
554	depends on DRM_MIPI_DSI
555	depends on BACKLIGHT_CLASS_DEVICE
556	help
557	  This driver supports the NV3051D based panel found on the Anbernic
558	  RG353P and RG353V.
559
560config DRM_PANEL_NEWVISION_NV3052C
561	tristate "NewVision NV3052C RGB/SPI panel"
562	depends on OF && SPI
563	depends on BACKLIGHT_CLASS_DEVICE
564	select DRM_MIPI_DBI
565	help
566	  Say Y here if you want to enable support for the panels built
567	  around the NewVision NV3052C display controller.
568
569config DRM_PANEL_NOVATEK_NT35510
570	tristate "Novatek NT35510 RGB panel driver"
571	depends on OF
572	depends on DRM_MIPI_DSI
573	depends on BACKLIGHT_CLASS_DEVICE
574	help
575	  Say Y here if you want to enable support for the panels built
576	  around the Novatek NT35510 display controller, such as some
577	  Hydis panels.
578
579config DRM_PANEL_NOVATEK_NT35532
580	tristate "Novatek NT35532-based DSI video mode panel"
581	depends on OF
582	depends on DRM_MIPI_DSI
583	depends on BACKLIGHT_CLASS_DEVICE
584	select DRM_KMS_HELPER
585	help
586	  Say Y or M here if you want to enable support for Novatek
587	  NT35532-based 1080p video mode DSI panels.
588
589config DRM_PANEL_NOVATEK_NT35560
590	tristate "Novatek NT35560 DSI command mode panel"
591	depends on OF
592	depends on DRM_MIPI_DSI
593	depends on BACKLIGHT_CLASS_DEVICE
594	select VIDEOMODE_HELPERS
595	help
596	  Say Y here if you want to enable the Novatek NT35560 display
597	  controller. This panel supports DSI in both command and video
598	  mode. This supports several panels such as Sony ACX424AKM and
599	  ACX424AKP.
600
601config DRM_PANEL_NOVATEK_NT35950
602	tristate "Novatek NT35950 DSI panel"
603	depends on OF
604	depends on DRM_MIPI_DSI
605	depends on BACKLIGHT_CLASS_DEVICE
606	help
607	  Say Y here if you want to enable support for the panels built
608	  around the Novatek NT35950 display controller, such as some
609	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
610	  mobile phones.
611
612config DRM_PANEL_NOVATEK_NT36523
613	tristate "Novatek NT36523 panel driver"
614	depends on OF
615	depends on DRM_MIPI_DSI
616	depends on BACKLIGHT_CLASS_DEVICE
617	help
618	  Say Y here if you want to enable support for the panels built
619	  around the Novatek NT36523 display controller, such as some
620	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
621
622config DRM_PANEL_NOVATEK_NT36672A
623	tristate "Novatek NT36672A DSI panel"
624	depends on GPIOLIB
625	depends on OF
626	depends on DRM_MIPI_DSI
627	depends on BACKLIGHT_CLASS_DEVICE
628	help
629	  Say Y here if you want to enable support for the panels built
630	  around the Novatek NT36672A display controller, such as some
631	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
632
633config DRM_PANEL_NOVATEK_NT36672E
634	tristate "Novatek NT36672E DSI panel"
635	depends on GPIOLIB
636	depends on OF
637	depends on DRM_MIPI_DSI
638	depends on BACKLIGHT_CLASS_DEVICE
639	help
640	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
641	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
642	  RGB per pixel.
643
644config DRM_PANEL_NOVATEK_NT37700F
645	tristate "Novatek NT37700F DSI panel"
646	depends on OF
647	depends on DRM_MIPI_DSI
648	depends on BACKLIGHT_CLASS_DEVICE
649	help
650	  Say Y here if you want to enable support for Novatek NT37700F DSI
651	  panel module. The panel has a resolution of 1080x2160.
652
653config DRM_PANEL_NOVATEK_NT37801
654	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
655	depends on OF
656	depends on DRM_MIPI_DSI
657	depends on BACKLIGHT_CLASS_DEVICE
658	select DRM_DISPLAY_DSC_HELPER
659	select DRM_DISPLAY_HELPER
660	help
661	  Say Y here if you want to enable support for Novatek NT37801 (or
662	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
663	  resolution.
664
665config DRM_PANEL_NOVATEK_NT39016
666	tristate "Novatek NT39016 RGB/SPI panel"
667	depends on OF && SPI
668	depends on BACKLIGHT_CLASS_DEVICE
669	select REGMAP_SPI
670	help
671	  Say Y here if you want to enable support for the panels built
672	  around the Novatek NT39016 display controller.
673
674config DRM_PANEL_OLIMEX_LCD_OLINUXINO
675	tristate "Olimex LCD-OLinuXino panel"
676	depends on OF
677	depends on I2C
678	depends on BACKLIGHT_CLASS_DEVICE
679	select CRC32
680	help
681	  The panel is used with different sizes LCDs, from 480x272 to
682	  1280x800, and 24 bit per pixel.
683
684	  Say Y here if you want to enable support for Olimex Ltd.
685	  LCD-OLinuXino panel.
686
687config DRM_PANEL_ORISETECH_OTA5601A
688        tristate "Orise Technology ota5601a RGB/SPI panel"
689        depends on SPI
690        depends on BACKLIGHT_CLASS_DEVICE
691        select REGMAP_SPI
692        help
693          Say Y here if you want to enable support for the panels built
694          around the Orise Technology OTA9601A display controller.
695
696config DRM_PANEL_ORISETECH_OTM8009A
697	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
698	depends on OF
699	depends on DRM_MIPI_DSI
700	depends on BACKLIGHT_CLASS_DEVICE
701	help
702	  Say Y here if you want to enable support for Orise Technology
703	  otm8009a 480x800 dsi 2dl panel.
704
705config DRM_PANEL_OSD_OSD101T2587_53TS
706	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
707	depends on OF
708	depends on DRM_MIPI_DSI
709	depends on BACKLIGHT_CLASS_DEVICE
710	help
711	  Say Y here if you want to enable support for One Stop Displays
712	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
713
714config DRM_PANEL_PANASONIC_VVX10F034N00
715	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
716	depends on OF
717	depends on DRM_MIPI_DSI
718	depends on BACKLIGHT_CLASS_DEVICE
719	help
720	  Say Y here if you want to enable support for Panasonic VVX10F034N00
721	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
722	  Xperia Z2 tablets
723
724config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
725	tristate "Raspberry Pi 7-inch touchscreen panel"
726	depends on DRM_MIPI_DSI
727	help
728	  Say Y here if you want to enable support for the Raspberry
729	  Pi 7" Touchscreen.  To compile this driver as a module,
730	  choose M here.
731
732config DRM_PANEL_RAYDIUM_RM67191
733	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
734	depends on OF
735	depends on DRM_MIPI_DSI
736	depends on BACKLIGHT_CLASS_DEVICE
737	help
738	  Say Y here if you want to enable support for Raydium RM67191 FHD
739	  (1080x1920) DSI panel.
740
741config DRM_PANEL_RAYDIUM_RM67200
742	tristate "Raydium RM67200-based DSI panel"
743	depends on OF
744	depends on DRM_MIPI_DSI
745	help
746	  Say Y here if you want to enable support for Raydium RM67200-based
747	  DSI video mode panels. This panel controller can be found in the
748	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
749	  evaluation boards.
750
751config DRM_PANEL_RAYDIUM_RM68200
752	tristate "Raydium RM68200 720x1280 DSI video mode panel"
753	depends on OF
754	depends on DRM_MIPI_DSI
755	depends on BACKLIGHT_CLASS_DEVICE
756	help
757	  Say Y here if you want to enable support for Raydium RM68200
758	  720x1280 DSI video mode panel.
759
760config DRM_PANEL_RAYDIUM_RM692E5
761	tristate "Raydium RM692E5-based DSI panel"
762	depends on OF
763	depends on DRM_MIPI_DSI
764	depends on BACKLIGHT_CLASS_DEVICE
765	select DRM_DISPLAY_DSC_HELPER
766	select DRM_DISPLAY_HELPER
767	help
768	  Say Y here if you want to enable support for Raydium RM692E5-based
769	  display panels, such as the one found in the Fairphone 5 smartphone.
770
771config DRM_PANEL_RAYDIUM_RM69380
772	tristate "Raydium RM69380-based DSI panel"
773	depends on GPIOLIB
774	depends on OF
775	depends on DRM_MIPI_DSI
776	depends on BACKLIGHT_CLASS_DEVICE
777	help
778	  Say Y here if you want to enable support for Raydium RM69380-based
779	  display panels.
780
781	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
782	  in combination with an EDO OLED panel.
783
784config DRM_PANEL_RENESAS_R61307
785	tristate "Renesas R61307 DSI video mode panel"
786	depends on OF
787	depends on DRM_MIPI_DSI
788	depends on BACKLIGHT_CLASS_DEVICE
789	select VIDEOMODE_HELPERS
790	help
791	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
792	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
793	  resolution and uses 24 bit RGB per pixel.
794
795	  This panel controller can be found in LG Optimus Vu P895 smartphone
796	  in combination with LCD panel.
797
798config DRM_PANEL_RENESAS_R69328
799	tristate "Renesas R69328 720x1280 DSI video mode panel"
800	depends on OF
801	depends on DRM_MIPI_DSI
802	depends on BACKLIGHT_CLASS_DEVICE
803	select VIDEOMODE_HELPERS
804	help
805	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
806	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
807	  resolution and uses 24 bit RGB per pixel.
808
809	  This panel controller can be found in LG Optimus 4X P895 smartphone
810	  in combination with LCD panel.
811
812config DRM_PANEL_RONBO_RB070D30
813	tristate "Ronbo Electronics RB070D30 panel"
814	depends on OF
815	depends on DRM_MIPI_DSI
816	depends on BACKLIGHT_CLASS_DEVICE
817	help
818	  Say Y here if you want to enable support for Ronbo Electronics
819	  RB070D30 1024x600 DSI panel.
820
821config DRM_PANEL_SAMSUNG_AMS581VF01
822	tristate "Samsung AMS581VF01 panel"
823	depends on OF
824	depends on DRM_MIPI_DSI
825	depends on BACKLIGHT_CLASS_DEVICE
826	help
827	  Say Y or M here if you want to enable support for the
828	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
829
830config DRM_PANEL_SAMSUNG_AMS639RQ08
831	tristate "Samsung AMS639RQ08 panel"
832	depends on OF
833	depends on DRM_MIPI_DSI
834	depends on BACKLIGHT_CLASS_DEVICE
835	help
836	  Say Y or M here if you want to enable support for the
837	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
838
839config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
840	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
841	depends on GPIOLIB && OF && REGULATOR
842	depends on DRM_MIPI_DSI
843	depends on BACKLIGHT_CLASS_DEVICE
844	help
845	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
846	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
847	  GT-I9195I). To compile this driver as a module, choose M here.
848
849config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
850	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
851	depends on OF
852	select DRM_MIPI_DSI
853	select VIDEOMODE_HELPERS
854
855config DRM_PANEL_SAMSUNG_ATNA33XC20
856	tristate "Samsung ATNA33XC20 eDP panel"
857	depends on OF
858	depends on BACKLIGHT_CLASS_DEVICE
859	depends on PM
860	select DRM_DISPLAY_DP_HELPER
861	select DRM_DISPLAY_HELPER
862	select DRM_DISPLAY_DP_AUX_BUS
863	help
864	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
865	  be handled by the DRM_PANEL_SIMPLE driver because its power
866	  sequencing is non-standard.
867
868config DRM_PANEL_SAMSUNG_DB7430
869	tristate "Samsung DB7430-based DPI panels"
870	depends on OF && SPI && GPIOLIB
871	depends on BACKLIGHT_CLASS_DEVICE
872	select DRM_MIPI_DBI
873	help
874	  Say Y here if you want to enable support for the Samsung
875	  DB7430 DPI display controller used in such devices as the
876	  LMS397KF04 480x800 DPI panel.
877
878config DRM_PANEL_SAMSUNG_LD9040
879	tristate "Samsung LD9040 RGB/SPI panel"
880	depends on OF && SPI
881	depends on BACKLIGHT_CLASS_DEVICE
882	select VIDEOMODE_HELPERS
883
884config DRM_PANEL_SAMSUNG_LTL106HL02
885	tristate "Samsung LTL106HL02 panel"
886	depends on OF
887	depends on DRM_MIPI_DSI
888	depends on BACKLIGHT_CLASS_DEVICE
889	select VIDEOMODE_HELPERS
890	help
891	  Say Y here if you want to enable support for the Samsung LTL106HL02
892	  panel driver which is used in Microsoft Surface 2.
893
894	  To compile this driver as a module, choose M here: the module
895	  will be called panel-samsung-ltl106hl02.
896
897config DRM_PANEL_SAMSUNG_S6E3FA7
898	tristate "Samsung S6E3FA7 panel driver"
899	depends on OF
900	depends on DRM_MIPI_DSI
901	depends on BACKLIGHT_CLASS_DEVICE
902	help
903	  Say Y here if you want to enable support for the Samsung S6E3FA7
904	  1920x2220 panel.
905
906config DRM_PANEL_SAMSUNG_S6D16D0
907	tristate "Samsung S6D16D0 DSI video mode panel"
908	depends on OF
909	depends on DRM_MIPI_DSI
910	select VIDEOMODE_HELPERS
911
912config DRM_PANEL_SAMSUNG_S6D27A1
913	tristate "Samsung S6D27A1 DPI panel driver"
914	depends on OF && SPI && GPIOLIB
915	select DRM_MIPI_DBI
916	help
917	  Say Y here if you want to enable support for the Samsung
918	  S6D27A1 DPI 480x800 panel.
919
920	  This panel can be found in Samsung Galaxy Ace 2
921	  GT-I8160 mobile phone.
922
923config DRM_PANEL_SAMSUNG_S6D7AA0
924	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
925	depends on OF
926	depends on BACKLIGHT_CLASS_DEVICE
927	select DRM_MIPI_DSI
928	select VIDEOMODE_HELPERS
929
930config DRM_PANEL_SAMSUNG_S6E3FC2X01
931	tristate "Samsung S6E3FC2X01 DSI panel controller"
932	depends on GPIOLIB
933	depends on OF
934	depends on DRM_MIPI_DSI
935	depends on BACKLIGHT_CLASS_DEVICE
936	help
937	  Say Y or M here if you want to enable support for the
938	  Samsung S6E3FC2 DDIC and connected MIPI DSI panel.
939	  Currently supported panels:
940
941	    Samsung AMS641RW (found in the OnePlus 6T smartphone)
942
943config DRM_PANEL_SAMSUNG_S6E3HA2
944	tristate "Samsung S6E3HA2 DSI video mode panel"
945	depends on OF
946	depends on DRM_MIPI_DSI
947	depends on BACKLIGHT_CLASS_DEVICE
948	select VIDEOMODE_HELPERS
949
950config DRM_PANEL_SAMSUNG_S6E3HA8
951	tristate "Samsung S6E3HA8 DSI video mode panel"
952	depends on GPIOLIB
953	depends on OF
954	depends on DRM_MIPI_DSI
955	depends on BACKLIGHT_CLASS_DEVICE
956	select DRM_DISPLAY_DSC_HELPER
957	help
958	  Say Y or M here if you want to enable support for the
959	  Samsung S6E3HA8 DDIC and connected MIPI DSI panel.
960	  Currently supported panels:
961
962	    Samsung AMB577PX01 (found in the Samsung S9 smartphone)
963
964
965config DRM_PANEL_SAMSUNG_S6E63J0X03
966	tristate "Samsung S6E63J0X03 DSI command mode panel"
967	depends on OF
968	depends on DRM_MIPI_DSI
969	depends on BACKLIGHT_CLASS_DEVICE
970	select VIDEOMODE_HELPERS
971
972config DRM_PANEL_SAMSUNG_S6E63M0
973	tristate "Samsung S6E63M0 RGB panel"
974	depends on OF
975	depends on BACKLIGHT_CLASS_DEVICE
976	help
977	  Say Y here if you want to enable support for Samsung S6E63M0
978	  AMOLED LCD panel. This panel can be accessed using SPI or
979	  DSI.
980
981config DRM_PANEL_SAMSUNG_S6E63M0_SPI
982	tristate "Samsung S6E63M0 RGB SPI interface"
983	depends on SPI
984	depends on DRM_PANEL_SAMSUNG_S6E63M0
985	default DRM_PANEL_SAMSUNG_S6E63M0
986	select DRM_MIPI_DBI
987	help
988	  Say Y here if you want to be able to access the Samsung
989	  S6E63M0 panel using SPI.
990
991config DRM_PANEL_SAMSUNG_S6E63M0_DSI
992	tristate "Samsung S6E63M0 RGB DSI interface"
993	depends on DRM_MIPI_DSI
994	depends on DRM_PANEL_SAMSUNG_S6E63M0
995	help
996	  Say Y here if you want to be able to access the Samsung
997	  S6E63M0 panel using DSI.
998
999config DRM_PANEL_SAMSUNG_S6E8AA0
1000	tristate "Samsung S6E8AA0 DSI video mode panel"
1001	depends on OF
1002	select DRM_MIPI_DSI
1003	select VIDEOMODE_HELPERS
1004
1005config DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01
1006	tristate "Samsung AMS561RA01 panel with S6E8AA5X01 controller"
1007	depends on GPIOLIB && OF && REGULATOR
1008	depends on DRM_MIPI_DSI
1009	depends on BACKLIGHT_CLASS_DEVICE
1010	help
1011	  Say Y here if you want to enable support for Samsung AMS561RA01
1012	  panel, which uses Samsung's S6E8AA5X01 controller. The panel has a
1013	  ~5.6 inch AMOLED display, and the controller is driven by the MIPI
1014	  DSI protocol with 4 lanes.
1015
1016config DRM_PANEL_SAMSUNG_S6E8FC0
1017	tristate "Samsung S6E8FC0 DSI controller"
1018	depends on OF
1019	depends on BACKLIGHT_CLASS_DEVICE
1020	select DRM_MIPI_DSI
1021	help
1022	  Say Y or M here if you want to enable support for the Samsung
1023	  S6E8FC0 DSI controller and connected panel.
1024	  Currently supported panels:
1025
1026	    M1906F9 (M1906F9SH or M1906F9SI), 6.09 inch 720x1560, found
1027	    in the Xiaomi Mi A3 smartphone (xiaomi-laurel).
1028
1029config DRM_PANEL_SAMSUNG_SOFEF00
1030	tristate "Samsung SOFEF00 DSI panel controller"
1031	depends on GPIOLIB
1032	depends on OF
1033	depends on DRM_MIPI_DSI
1034	depends on BACKLIGHT_CLASS_DEVICE
1035	help
1036	  Say Y or M here if you want to enable support for the Samsung AMOLED
1037	  panel SOFEF00 DDIC and connected panel.
1038	  Currently supported panels:
1039
1040	    Samsung AMS628NW01 (found in OnePlus 6, 1080x2280@60Hz)
1041
1042config DRM_PANEL_SEIKO_43WVF1G
1043	tristate "Seiko 43WVF1G panel"
1044	depends on OF
1045	depends on BACKLIGHT_CLASS_DEVICE
1046	select VIDEOMODE_HELPERS
1047	help
1048	  Say Y here if you want to enable support for the Seiko
1049	  43WVF1G controller for 800x480 LCD panels
1050
1051config DRM_PANEL_SHARP_LQ079L1SX01
1052	tristate "Sharp LQ079L1SX01 panel"
1053	depends on OF
1054	depends on DRM_MIPI_DSI
1055	depends on BACKLIGHT_CLASS_DEVICE
1056	select VIDEOMODE_HELPERS
1057	help
1058	  Say Y here if you want to enable support for Sharp LQ079L1SX01
1059	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1060	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1061	  the host.
1062
1063	  To compile this driver as a module, choose M here: the module
1064	  will be called panel-sharp-lq079l1sx01.
1065
1066config DRM_PANEL_SHARP_LQ101R1SX01
1067	tristate "Sharp LQ101R1SX01 panel"
1068	depends on OF
1069	depends on DRM_MIPI_DSI
1070	depends on BACKLIGHT_CLASS_DEVICE
1071	help
1072	  Say Y here if you want to enable support for Sharp LQ101R1SX01
1073	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1074	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1075	  the host and has a built-in LED backlight.
1076
1077	  To compile this driver as a module, choose M here: the module
1078	  will be called panel-sharp-lq101r1sx01.
1079
1080config DRM_PANEL_SHARP_LS037V7DW01
1081	tristate "Sharp LS037V7DW01 VGA LCD panel"
1082	depends on GPIOLIB && OF && REGULATOR
1083	help
1084	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
1085	  (480x640) LCD panel (found on the TI SDP3430 board).
1086
1087config DRM_PANEL_SHARP_LS043T1LE01
1088	tristate "Sharp LS043T1LE01 qHD video mode panel"
1089	depends on OF
1090	depends on DRM_MIPI_DSI
1091	depends on BACKLIGHT_CLASS_DEVICE
1092	help
1093	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
1094	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
1095
1096config DRM_PANEL_SHARP_LS060T1SX01
1097	tristate "Sharp LS060T1SX01 FullHD video mode panel"
1098	depends on OF
1099	depends on DRM_MIPI_DSI
1100	depends on BACKLIGHT_CLASS_DEVICE
1101	help
1102	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
1103	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
1104	  Bundle.
1105
1106config DRM_PANEL_SITRONIX_ST7701
1107	tristate "Sitronix ST7701 panel driver"
1108	depends on OF
1109	depends on SPI || DRM_MIPI_DSI
1110	select DRM_MIPI_DBI if SPI
1111	depends on BACKLIGHT_CLASS_DEVICE
1112	help
1113	  Say Y here if you want to enable support for the Sitronix
1114	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
1115	  system interfaces.
1116
1117config DRM_PANEL_SITRONIX_ST7703
1118	tristate "Sitronix ST7703 based MIPI touchscreen panels"
1119	depends on OF
1120	depends on DRM_MIPI_DSI
1121	depends on BACKLIGHT_CLASS_DEVICE
1122	help
1123	  Say Y here if you want to enable support for Sitronix ST7703 based
1124	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
1125	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
1126	  in backlight and touch controller.
1127	  Touch input support is provided by the goodix driver and needs to be
1128	  selected separately.
1129
1130config DRM_PANEL_SITRONIX_ST7789V
1131	tristate "Sitronix ST7789V panel"
1132	depends on OF && SPI
1133	depends on BACKLIGHT_CLASS_DEVICE
1134	help
1135	  Say Y here if you want to enable support for the Sitronix
1136	  ST7789V controller for 240x320 LCD panels
1137
1138config DRM_PANEL_SONY_ACX565AKM
1139	tristate "Sony ACX565AKM panel"
1140	depends on GPIOLIB && OF && SPI
1141	depends on BACKLIGHT_CLASS_DEVICE
1142	help
1143	  Say Y here if you want to enable support for the Sony ACX565AKM
1144	  800x600 3.5" panel (found on the Nokia N900).
1145
1146config DRM_PANEL_SONY_TD4353_JDI
1147	tristate "Sony TD4353 JDI panel"
1148	depends on GPIOLIB && OF
1149	depends on DRM_MIPI_DSI
1150	depends on BACKLIGHT_CLASS_DEVICE
1151	help
1152	  Say Y here if you want to enable support for the Sony Tama
1153	  TD4353 JDI command mode panel as found on some Sony Xperia
1154	  XZ2 and XZ2 Compact smartphones.
1155
1156config DRM_PANEL_SONY_TULIP_TRULY_NT35521
1157	tristate "Sony Tulip Truly NT35521 panel"
1158	depends on GPIOLIB && OF
1159	depends on DRM_MIPI_DSI
1160	depends on BACKLIGHT_CLASS_DEVICE
1161	help
1162	  Say Y here if you want to enable support for the Sony Tulip
1163	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
1164	  Aqua phone.
1165
1166config DRM_PANEL_STARTEK_KD070FHFID015
1167	tristate "STARTEK KD070FHFID015 panel"
1168	depends on OF
1169	depends on DRM_MIPI_DSI
1170	depends on BACKLIGHT_CLASS_DEVICE
1171	help
1172	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
1173	  based on RENESAS-R69429 controller. The panel is a 7-inch TFT LCD display
1174	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
1175	  the host, a built-in LED backlight and touch controller.
1176
1177config DRM_PANEL_EDP
1178	tristate "support for simple Embedded DisplayPort panels"
1179	depends on OF
1180	depends on BACKLIGHT_CLASS_DEVICE
1181	depends on PM
1182	select VIDEOMODE_HELPERS
1183	select DRM_DISPLAY_DP_HELPER
1184	select DRM_DISPLAY_HELPER
1185	select DRM_DISPLAY_DP_AUX_BUS
1186	select DRM_KMS_HELPER
1187	help
1188	  DRM panel driver for dumb eDP panels that need at most a regulator and
1189	  a GPIO to be powered up. Optionally a backlight can be attached so
1190	  that it can be automatically turned off when the panel goes into a
1191	  low power state.
1192
1193config DRM_PANEL_SIMPLE
1194	tristate "support for simple panels (other than eDP ones)"
1195	depends on OF
1196	depends on BACKLIGHT_CLASS_DEVICE
1197	depends on PM
1198	select VIDEOMODE_HELPERS
1199	help
1200	  DRM panel driver for dumb non-eDP panels that need at most a regulator
1201	  and a GPIO to be powered up. Optionally a backlight can be attached so
1202	  that it can be automatically turned off when the panel goes into a
1203	  low power state.
1204
1205config DRM_PANEL_SUMMIT
1206	tristate "Apple Summit display panel"
1207	depends on OF
1208	depends on DRM_MIPI_DSI
1209	depends on BACKLIGHT_CLASS_DEVICE
1210	help
1211	  Say Y if you want to enable support for the "Summit" display panel
1212	  used as a touchbar on certain Apple laptops.
1213
1214config DRM_PANEL_SYNAPTICS_R63353
1215	tristate "Synaptics R63353-based panels"
1216	depends on OF
1217	depends on DRM_MIPI_DSI
1218	depends on BACKLIGHT_CLASS_DEVICE
1219	help
1220	  Say Y if you want to enable support for panels based on the
1221	  Synaptics R63353 controller.
1222
1223config DRM_PANEL_SYNAPTICS_TDDI
1224	tristate "Synaptics TDDI display panels"
1225	depends on OF
1226	depends on DRM_MIPI_DSI
1227	depends on BACKLIGHT_CLASS_DEVICE
1228	help
1229	  Say Y if you want to enable support for the Synaptics TDDI display
1230	  panels. There are multiple MIPI DSI panels manufactured under the TDDI
1231	  namesake, with varying resolutions and data lanes. They also have a
1232	  built-in LED backlight and a touch controller.
1233
1234config DRM_PANEL_TDO_TL070WSH30
1235	tristate "TDO TL070WSH30 DSI panel"
1236	depends on OF
1237	depends on DRM_MIPI_DSI
1238	depends on BACKLIGHT_CLASS_DEVICE
1239	help
1240	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1241	  panel module. The panel has a 1024×600 resolution and uses
1242	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1243	  the host, a built-in LED backlight and touch controller.
1244
1245config DRM_PANEL_TPO_TD028TTEC1
1246	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1247	depends on OF && SPI
1248	depends on BACKLIGHT_CLASS_DEVICE
1249	help
1250	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1251	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1252
1253config DRM_PANEL_TPO_TD043MTEA1
1254	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1255	depends on GPIOLIB && OF && REGULATOR && SPI
1256	help
1257	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1258	  4.3" panel (found on the OMAP3 Pandora board).
1259
1260config DRM_PANEL_TPO_TPG110
1261	tristate "TPO TPG 800x400 panel"
1262	depends on OF && SPI && GPIOLIB
1263	depends on BACKLIGHT_CLASS_DEVICE
1264	help
1265	  Say Y here if you want to enable support for TPO TPG110
1266	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1267	  800x400 LCD panels.
1268
1269config DRM_PANEL_TRULY_NT35597_WQXGA
1270	tristate "Truly WQXGA"
1271	depends on OF
1272	depends on DRM_MIPI_DSI
1273	help
1274	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1275	  Video Mode panel
1276
1277config DRM_PANEL_VISIONOX_G2647FB105
1278	tristate "Visionox G2647FB105"
1279	depends on OF
1280	depends on DRM_MIPI_DSI
1281	depends on BACKLIGHT_CLASS_DEVICE
1282	help
1283	  Say Y here if you want to enable support for the Visionox
1284	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1285
1286config DRM_PANEL_VISIONOX_R66451
1287	tristate "Visionox R66451"
1288	depends on OF
1289	depends on DRM_MIPI_DSI
1290	depends on BACKLIGHT_CLASS_DEVICE
1291	select DRM_DISPLAY_DSC_HELPER
1292	select DRM_DISPLAY_HELPER
1293	help
1294	  Say Y here if you want to enable support for Visionox
1295	  R66451 1080x2340 AMOLED DSI panel.
1296
1297config DRM_PANEL_VISIONOX_RM69299
1298	tristate "Visionox RM69299"
1299	depends on GPIOLIB
1300	depends on OF
1301	depends on DRM_MIPI_DSI
1302	depends on BACKLIGHT_CLASS_DEVICE
1303	help
1304	  Say Y here if you want to enable support for Visionox
1305	  RM69299  DSI Video Mode panel.
1306
1307config DRM_PANEL_VISIONOX_RM692E5
1308	tristate "Visionox RM692E5"
1309	depends on OF
1310	depends on DRM_MIPI_DSI
1311	depends on BACKLIGHT_CLASS_DEVICE
1312	select DRM_DISPLAY_DSC_HELPER
1313	select DRM_DISPLAY_HELPER
1314	help
1315	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1316	  display panels, such as the one found in the Nothing Phone (1)
1317	  smartphone.
1318
1319config DRM_PANEL_VISIONOX_VTDR6130
1320	tristate "Visionox VTDR6130"
1321	depends on OF
1322	depends on DRM_MIPI_DSI
1323	depends on BACKLIGHT_CLASS_DEVICE
1324	help
1325	  Say Y here if you want to enable support for Visionox
1326	  VTDR6130 1080x2400 AMOLED DSI panel.
1327
1328config DRM_PANEL_WIDECHIPS_WS2401
1329	tristate "Widechips WS2401 DPI panel driver"
1330	depends on SPI && GPIOLIB
1331	depends on BACKLIGHT_CLASS_DEVICE
1332	select DRM_MIPI_DBI
1333	help
1334	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1335	  480x800 display controller used in panels such as Samsung LMS380KF01.
1336	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1337
1338config DRM_PANEL_XINPENG_XPP055C272
1339	tristate "Xinpeng XPP055C272 panel driver"
1340	depends on OF
1341	depends on DRM_MIPI_DSI
1342	depends on BACKLIGHT_CLASS_DEVICE
1343	help
1344	  Say Y here if you want to enable support for the Xinpeng
1345	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1346	  system interfaces.
1347endmenu
1348