xref: /linux/drivers/gpu/drm/panel/Kconfig (revision af8e51644a70f612974a6e767fa7d896d3c23f88) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TH101MB31UIG002_28A
71	tristate "Boe TH101MB31UIG002-28A panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for Boe
77	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
78	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
79	  interface to the host and has a built-in LED backlight.
80
81config DRM_PANEL_BOE_TV101WUM_NL6
82	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
83	depends on OF
84	depends on DRM_MIPI_DSI
85	depends on BACKLIGHT_CLASS_DEVICE
86	help
87	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
88	  45NA WUXGA PANEL DSI Video Mode panel
89
90config DRM_PANEL_EBBG_FT8719
91	tristate "EBBG FT8719 panel driver"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to enable support for the EBBG FT8719
97	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
98	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
99	  interface to the host.
100
101config DRM_PANEL_ELIDA_KD35T133
102	tristate "Elida KD35T133 panel driver"
103	depends on OF
104	depends on DRM_MIPI_DSI
105	depends on BACKLIGHT_CLASS_DEVICE
106	help
107	  Say Y here if you want to enable support for the Elida
108	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
109	  system interfaces.
110
111config DRM_PANEL_FEIXIN_K101_IM2BA02
112	tristate "Feixin K101 IM2BA02 panel"
113	depends on OF
114	depends on DRM_MIPI_DSI
115	depends on BACKLIGHT_CLASS_DEVICE
116	help
117	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
118	  4-lane 800x1280 MIPI DSI panel.
119
120config DRM_PANEL_FEIYANG_FY07024DI26A30D
121	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
122	depends on OF
123	depends on DRM_MIPI_DSI
124	depends on BACKLIGHT_CLASS_DEVICE
125	help
126	  Say Y if you want to enable support for panels based on the
127	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
128
129config DRM_PANEL_DSI_CM
130	tristate "Generic DSI command mode panels"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  DRM panel driver for DSI command mode panels with support for
136	  embedded and external backlights.
137
138config DRM_PANEL_LVDS
139	tristate "Generic LVDS panel driver"
140	depends on OF
141	depends on BACKLIGHT_CLASS_DEVICE
142	select VIDEOMODE_HELPERS
143	help
144	  This driver supports LVDS panels that don't require device-specific
145	  handling of power supplies or control signals. It implements automatic
146	  backlight handling if the panel is attached to a backlight controller.
147
148config DRM_PANEL_HIMAX_HX83112A
149	tristate "Himax HX83112A-based DSI panel"
150	depends on OF
151	depends on DRM_MIPI_DSI
152	depends on BACKLIGHT_CLASS_DEVICE
153	select DRM_KMS_HELPER
154	help
155	  Say Y here if you want to enable support for Himax HX83112A-based
156	  display panels, such as the one found in the Fairphone 4 smartphone.
157
158config DRM_PANEL_HIMAX_HX8394
159	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
160	depends on OF
161	depends on DRM_MIPI_DSI
162	depends on BACKLIGHT_CLASS_DEVICE
163	help
164	  Say Y if you want to enable support for panels based on the
165	  Himax HX8394 controller, such as the HannStar HSD060BHW4
166	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
167
168	  If M is selected the module will be called panel-himax-hx8394.
169
170config DRM_PANEL_ILITEK_IL9322
171	tristate "Ilitek ILI9322 320x240 QVGA panels"
172	depends on OF && SPI
173	select REGMAP
174	help
175	  Say Y here if you want to enable support for Ilitek IL9322
176	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
177
178config DRM_PANEL_ILITEK_ILI9341
179	tristate "Ilitek ILI9341 240x320 QVGA panels"
180	depends on SPI
181	select DRM_KMS_HELPER
182	select DRM_GEM_DMA_HELPER
183	depends on BACKLIGHT_CLASS_DEVICE
184	select DRM_MIPI_DBI
185	help
186	  Say Y here if you want to enable support for Ilitek IL9341
187	  QVGA (240x320) RGB panels. support serial & parallel rgb
188	  interface.
189
190config DRM_PANEL_ILITEK_ILI9805
191	tristate "Ilitek ILI9805-based panels"
192	depends on OF
193	depends on DRM_MIPI_DSI
194	depends on BACKLIGHT_CLASS_DEVICE
195	help
196	  Say Y if you want to enable support for panels based on the
197	  Ilitek ILI9805 controller.
198
199config DRM_PANEL_ILITEK_ILI9881C
200	tristate "Ilitek ILI9881C-based panels"
201	depends on OF
202	depends on DRM_MIPI_DSI
203	depends on BACKLIGHT_CLASS_DEVICE
204	help
205	  Say Y if you want to enable support for panels based on the
206	  Ilitek ILI9881c controller.
207
208config DRM_PANEL_ILITEK_ILI9882T
209	tristate "Ilitek ILI9882t-based panels"
210	depends on OF
211	depends on DRM_MIPI_DSI
212	depends on BACKLIGHT_CLASS_DEVICE
213	help
214	  Say Y if you want to enable support for panels based on the
215	  Ilitek ILI9882t controller.
216
217config DRM_PANEL_INNOLUX_EJ030NA
218        tristate "Innolux EJ030NA 320x480 LCD panel"
219        depends on OF && SPI
220        select REGMAP_SPI
221        help
222          Say Y here to enable support for the Innolux/Chimei EJ030NA
223          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
224          and LDK handheld gaming consoles.
225
226config DRM_PANEL_INNOLUX_P079ZCA
227	tristate "Innolux P079ZCA panel"
228	depends on OF
229	depends on DRM_MIPI_DSI
230	depends on BACKLIGHT_CLASS_DEVICE
231	help
232	  Say Y here if you want to enable support for Innolux P079ZCA
233	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
234	  24 bit RGB per pixel. It provides a MIPI DSI interface to
235	  the host and has a built-in LED backlight.
236
237config DRM_PANEL_JADARD_JD9365DA_H3
238	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
239	depends on OF
240	depends on DRM_MIPI_DSI
241	depends on BACKLIGHT_CLASS_DEVICE
242	help
243	  Say Y here if you want to enable support for Jadard JD9365DA-H3
244	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
245	  800RGBx1280 dots at maximum.
246
247config DRM_PANEL_JDI_LPM102A188A
248	tristate "JDI LPM102A188A DSI panel"
249	depends on OF && GPIOLIB
250	depends on DRM_MIPI_DSI
251	depends on BACKLIGHT_CLASS_DEVICE
252	help
253	  Say Y here if you want to enable support for JDI LPM102A188A DSI
254	  command mode panel as found in Google Pixel C devices.
255	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
256	  to the host.
257
258config DRM_PANEL_JDI_LT070ME05000
259	tristate "JDI LT070ME05000 WUXGA DSI panel"
260	depends on OF
261	depends on DRM_MIPI_DSI
262	depends on BACKLIGHT_CLASS_DEVICE
263	help
264	  Say Y here if you want to enable support for JDI DSI video mode
265	  panel as found in Google Nexus 7 (2013) devices.
266	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
267	  24 bit per pixel.
268
269config DRM_PANEL_JDI_R63452
270	tristate "JDI R63452 Full HD DSI panel"
271	depends on OF
272	depends on DRM_MIPI_DSI
273	depends on BACKLIGHT_CLASS_DEVICE
274	help
275	  Say Y here if you want to enable support for the JDI R63452
276	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
277
278config DRM_PANEL_KHADAS_TS050
279	tristate "Khadas TS050 panel"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
285	  panel module. The panel has a 1080x1920 resolution and uses
286	  24 bit RGB per pixel. It provides a MIPI DSI interface to
287	  the host, a built-in LED backlight and touch controller.
288
289config DRM_PANEL_KINGDISPLAY_KD097D04
290	tristate "Kingdisplay kd097d04 panel"
291	depends on OF
292	depends on DRM_MIPI_DSI
293	depends on BACKLIGHT_CLASS_DEVICE
294	help
295	  Say Y here if you want to enable support for Kingdisplay kd097d04
296	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
297	  24 bit RGB per pixel. It provides a MIPI DSI interface to
298	  the host and has a built-in LED backlight.
299
300config DRM_PANEL_LEADTEK_LTK050H3146W
301	tristate "Leadtek LTK050H3146W panel"
302	depends on OF
303	depends on DRM_MIPI_DSI
304	depends on BACKLIGHT_CLASS_DEVICE
305	help
306	  Say Y here if you want to enable support for Leadtek LTK050H3146W
307	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
308	  24 bit RGB per pixel. It provides a MIPI DSI interface to
309	  the host and has a built-in LED backlight.
310
311config DRM_PANEL_LEADTEK_LTK500HD1829
312	tristate "Leadtek LTK500HD1829 panel"
313	depends on OF
314	depends on DRM_MIPI_DSI
315	depends on BACKLIGHT_CLASS_DEVICE
316	help
317	  Say Y here if you want to enable support for Kingdisplay kd097d04
318	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
319	  24 bit RGB per pixel. It provides a MIPI DSI interface to
320	  the host and has a built-in LED backlight.
321
322config DRM_PANEL_LG_LB035Q02
323	tristate "LG LB035Q024573 RGB panel"
324	depends on GPIOLIB && OF && SPI
325	help
326	  Say Y here if you want to enable support for the LB035Q02 RGB panel
327	  (found on the Gumstix Overo Palo35 board). To compile this driver as
328	  a module, choose M here.
329
330config DRM_PANEL_LG_LG4573
331	tristate "LG4573 RGB/SPI panel"
332	depends on OF && SPI
333	select VIDEOMODE_HELPERS
334	help
335	  Say Y here if you want to enable support for LG4573 RGB panel.
336	  To compile this driver as a module, choose M here.
337
338config DRM_PANEL_LG_SW43408
339	tristate "LG SW43408 panel"
340	depends on OF
341	depends on DRM_MIPI_DSI
342	depends on BACKLIGHT_CLASS_DEVICE
343	select DRM_DISPLAY_DP_HELPER
344	select DRM_DISPLAY_HELPER
345	help
346	  Say Y here if you want to enable support for LG sw43408 panel.
347	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
348	  pixel. It provides a MIPI DSI interface to the host and has a
349	  built-in LED backlight.
350
351config DRM_PANEL_MAGNACHIP_D53E6EA8966
352	tristate "Magnachip D53E6EA8966 DSI panel"
353	depends on OF && SPI
354	depends on DRM_MIPI_DSI
355	depends on BACKLIGHT_CLASS_DEVICE
356	select DRM_MIPI_DBI
357	help
358	  DRM panel driver for the Samsung AMS495QA01 panel controlled
359	  with the Magnachip D53E6EA8966 panel IC. This panel receives
360	  video data via DSI but commands via 9-bit SPI using DBI.
361
362config DRM_PANEL_MANTIX_MLAF057WE51
363	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
364	depends on OF
365	depends on DRM_MIPI_DSI
366	depends on BACKLIGHT_CLASS_DEVICE
367	help
368	  Say Y here if you want to enable support for the Mantix
369	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
370	  has a resolution of 720x1440 pixels, a built in backlight and touch
371	  controller.
372
373config DRM_PANEL_NEC_NL8048HL11
374	tristate "NEC NL8048HL11 RGB panel"
375	depends on GPIOLIB && OF && SPI
376	help
377	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
378	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
379	  as a module, choose M here.
380
381config DRM_PANEL_NEWVISION_NV3051D
382	tristate "NewVision NV3051D DSI panel"
383	depends on OF
384	depends on DRM_MIPI_DSI
385	depends on BACKLIGHT_CLASS_DEVICE
386	help
387	  This driver supports the NV3051D based panel found on the Anbernic
388	  RG353P and RG353V.
389
390config DRM_PANEL_NEWVISION_NV3052C
391	tristate "NewVision NV3052C RGB/SPI panel"
392	depends on OF && SPI
393	depends on BACKLIGHT_CLASS_DEVICE
394	select DRM_MIPI_DBI
395	help
396	  Say Y here if you want to enable support for the panels built
397	  around the NewVision NV3052C display controller.
398
399config DRM_PANEL_NOVATEK_NT35510
400	tristate "Novatek NT35510 RGB panel driver"
401	depends on OF
402	depends on DRM_MIPI_DSI
403	depends on BACKLIGHT_CLASS_DEVICE
404	help
405	  Say Y here if you want to enable support for the panels built
406	  around the Novatek NT35510 display controller, such as some
407	  Hydis panels.
408
409config DRM_PANEL_NOVATEK_NT35560
410	tristate "Novatek NT35560 DSI command mode panel"
411	depends on OF
412	depends on DRM_MIPI_DSI
413	depends on BACKLIGHT_CLASS_DEVICE
414	select VIDEOMODE_HELPERS
415	help
416	  Say Y here if you want to enable the Novatek NT35560 display
417	  controller. This panel supports DSI in both command and video
418	  mode. This supports several panels such as Sony ACX424AKM and
419	  ACX424AKP.
420
421config DRM_PANEL_NOVATEK_NT35950
422	tristate "Novatek NT35950 DSI panel"
423	depends on OF
424	depends on DRM_MIPI_DSI
425	depends on BACKLIGHT_CLASS_DEVICE
426	help
427	  Say Y here if you want to enable support for the panels built
428	  around the Novatek NT35950 display controller, such as some
429	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
430	  mobile phones.
431
432config DRM_PANEL_NOVATEK_NT36523
433	tristate "Novatek NT36523 panel driver"
434	depends on OF
435	depends on DRM_MIPI_DSI
436	depends on BACKLIGHT_CLASS_DEVICE
437	help
438	  Say Y here if you want to enable support for the panels built
439	  around the Novatek NT36523 display controller, such as some
440	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
441
442config DRM_PANEL_NOVATEK_NT36672A
443	tristate "Novatek NT36672A DSI panel"
444	depends on OF
445	depends on DRM_MIPI_DSI
446	depends on BACKLIGHT_CLASS_DEVICE
447	help
448	  Say Y here if you want to enable support for the panels built
449	  around the Novatek NT36672A display controller, such as some
450	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
451
452config DRM_PANEL_NOVATEK_NT36672E
453	tristate "Novatek NT36672E DSI panel"
454	depends on OF
455	depends on DRM_MIPI_DSI
456	depends on BACKLIGHT_CLASS_DEVICE
457	help
458	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
459	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
460	  RGB per pixel.
461
462config DRM_PANEL_NOVATEK_NT39016
463	tristate "Novatek NT39016 RGB/SPI panel"
464	depends on OF && SPI
465	depends on BACKLIGHT_CLASS_DEVICE
466	select REGMAP_SPI
467	help
468	  Say Y here if you want to enable support for the panels built
469	  around the Novatek NT39016 display controller.
470
471config DRM_PANEL_OLIMEX_LCD_OLINUXINO
472	tristate "Olimex LCD-OLinuXino panel"
473	depends on OF
474	depends on I2C
475	depends on BACKLIGHT_CLASS_DEVICE
476	select CRC32
477	help
478	  The panel is used with different sizes LCDs, from 480x272 to
479	  1280x800, and 24 bit per pixel.
480
481	  Say Y here if you want to enable support for Olimex Ltd.
482	  LCD-OLinuXino panel.
483
484config DRM_PANEL_ORISETECH_OTA5601A
485        tristate "Orise Technology ota5601a RGB/SPI panel"
486        depends on SPI
487        depends on BACKLIGHT_CLASS_DEVICE
488        select REGMAP_SPI
489        help
490          Say Y here if you want to enable support for the panels built
491          around the Orise Technology OTA9601A display controller.
492
493config DRM_PANEL_ORISETECH_OTM8009A
494	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
495	depends on OF
496	depends on DRM_MIPI_DSI
497	depends on BACKLIGHT_CLASS_DEVICE
498	help
499	  Say Y here if you want to enable support for Orise Technology
500	  otm8009a 480x800 dsi 2dl panel.
501
502config DRM_PANEL_OSD_OSD101T2587_53TS
503	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
504	depends on OF
505	depends on DRM_MIPI_DSI
506	depends on BACKLIGHT_CLASS_DEVICE
507	help
508	  Say Y here if you want to enable support for One Stop Displays
509	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
510
511config DRM_PANEL_PANASONIC_VVX10F034N00
512	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
513	depends on OF
514	depends on DRM_MIPI_DSI
515	depends on BACKLIGHT_CLASS_DEVICE
516	help
517	  Say Y here if you want to enable support for Panasonic VVX10F034N00
518	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
519	  Xperia Z2 tablets
520
521config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
522	tristate "Raspberry Pi 7-inch touchscreen panel"
523	depends on DRM_MIPI_DSI
524	help
525	  Say Y here if you want to enable support for the Raspberry
526	  Pi 7" Touchscreen.  To compile this driver as a module,
527	  choose M here.
528
529config DRM_PANEL_RAYDIUM_RM67191
530	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
531	depends on OF
532	depends on DRM_MIPI_DSI
533	depends on BACKLIGHT_CLASS_DEVICE
534	help
535	  Say Y here if you want to enable support for Raydium RM67191 FHD
536	  (1080x1920) DSI panel.
537
538config DRM_PANEL_RAYDIUM_RM68200
539	tristate "Raydium RM68200 720x1280 DSI video mode panel"
540	depends on OF
541	depends on DRM_MIPI_DSI
542	depends on BACKLIGHT_CLASS_DEVICE
543	help
544	  Say Y here if you want to enable support for Raydium RM68200
545	  720x1280 DSI video mode panel.
546
547config DRM_PANEL_RAYDIUM_RM692E5
548	tristate "Raydium RM692E5-based DSI panel"
549	depends on OF
550	depends on DRM_MIPI_DSI
551	depends on BACKLIGHT_CLASS_DEVICE
552	select DRM_DISPLAY_DP_HELPER
553	select DRM_DISPLAY_HELPER
554	help
555	  Say Y here if you want to enable support for Raydium RM692E5-based
556	  display panels, such as the one found in the Fairphone 5 smartphone.
557
558config DRM_PANEL_RAYDIUM_RM69380
559	tristate "Raydium RM69380-based DSI panel"
560	depends on OF && GPIOLIB
561	depends on DRM_MIPI_DSI
562	depends on BACKLIGHT_CLASS_DEVICE
563	help
564	  Say Y here if you want to enable support for Raydium RM69380-based
565	  display panels.
566
567	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
568	  in combination with an EDO OLED panel.
569
570config DRM_PANEL_RONBO_RB070D30
571	tristate "Ronbo Electronics RB070D30 panel"
572	depends on OF
573	depends on DRM_MIPI_DSI
574	depends on BACKLIGHT_CLASS_DEVICE
575	help
576	  Say Y here if you want to enable support for Ronbo Electronics
577	  RB070D30 1024x600 DSI panel.
578
579config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
580	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
581	depends on OF
582	select DRM_MIPI_DSI
583	select VIDEOMODE_HELPERS
584
585config DRM_PANEL_SAMSUNG_ATNA33XC20
586	tristate "Samsung ATNA33XC20 eDP panel"
587	depends on OF
588	depends on BACKLIGHT_CLASS_DEVICE
589	depends on PM
590	select DRM_DISPLAY_DP_HELPER
591	select DRM_DISPLAY_HELPER
592	select DRM_DISPLAY_DP_AUX_BUS
593	help
594	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
595	  be handled by the DRM_PANEL_SIMPLE driver because its power
596	  sequencing is non-standard.
597
598config DRM_PANEL_SAMSUNG_DB7430
599	tristate "Samsung DB7430-based DPI panels"
600	depends on OF && SPI && GPIOLIB
601	depends on BACKLIGHT_CLASS_DEVICE
602	select DRM_MIPI_DBI
603	help
604	  Say Y here if you want to enable support for the Samsung
605	  DB7430 DPI display controller used in such devices as the
606	  LMS397KF04 480x800 DPI panel.
607
608config DRM_PANEL_SAMSUNG_LD9040
609	tristate "Samsung LD9040 RGB/SPI panel"
610	depends on OF && SPI
611	depends on BACKLIGHT_CLASS_DEVICE
612	select VIDEOMODE_HELPERS
613
614config DRM_PANEL_SAMSUNG_S6E3FA7
615	tristate "Samsung S6E3FA7 panel driver"
616	depends on OF
617	depends on DRM_MIPI_DSI
618	depends on BACKLIGHT_CLASS_DEVICE
619	help
620	  Say Y here if you want to enable support for the Samsung S6E3FA7
621	  1920x2220 panel.
622
623config DRM_PANEL_SAMSUNG_S6D16D0
624	tristate "Samsung S6D16D0 DSI video mode panel"
625	depends on OF
626	depends on DRM_MIPI_DSI
627	select VIDEOMODE_HELPERS
628
629config DRM_PANEL_SAMSUNG_S6D27A1
630	tristate "Samsung S6D27A1 DPI panel driver"
631	depends on OF && SPI && GPIOLIB
632	select DRM_MIPI_DBI
633	help
634	  Say Y here if you want to enable support for the Samsung
635	  S6D27A1 DPI 480x800 panel.
636
637	  This panel can be found in Samsung Galaxy Ace 2
638	  GT-I8160 mobile phone.
639
640config DRM_PANEL_SAMSUNG_S6D7AA0
641	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
642	depends on OF
643	depends on BACKLIGHT_CLASS_DEVICE
644	select DRM_MIPI_DSI
645	select VIDEOMODE_HELPERS
646
647config DRM_PANEL_SAMSUNG_S6E3HA2
648	tristate "Samsung S6E3HA2 DSI video mode panel"
649	depends on OF
650	depends on DRM_MIPI_DSI
651	depends on BACKLIGHT_CLASS_DEVICE
652	select VIDEOMODE_HELPERS
653
654config DRM_PANEL_SAMSUNG_S6E63J0X03
655	tristate "Samsung S6E63J0X03 DSI command mode panel"
656	depends on OF
657	depends on DRM_MIPI_DSI
658	depends on BACKLIGHT_CLASS_DEVICE
659	select VIDEOMODE_HELPERS
660
661config DRM_PANEL_SAMSUNG_S6E63M0
662	tristate "Samsung S6E63M0 RGB panel"
663	depends on OF
664	depends on BACKLIGHT_CLASS_DEVICE
665	help
666	  Say Y here if you want to enable support for Samsung S6E63M0
667	  AMOLED LCD panel. This panel can be accessed using SPI or
668	  DSI.
669
670config DRM_PANEL_SAMSUNG_S6E63M0_SPI
671	tristate "Samsung S6E63M0 RGB SPI interface"
672	depends on SPI
673	depends on DRM_PANEL_SAMSUNG_S6E63M0
674	default DRM_PANEL_SAMSUNG_S6E63M0
675	select DRM_MIPI_DBI
676	help
677	  Say Y here if you want to be able to access the Samsung
678	  S6E63M0 panel using SPI.
679
680config DRM_PANEL_SAMSUNG_S6E63M0_DSI
681	tristate "Samsung S6E63M0 RGB DSI interface"
682	depends on DRM_MIPI_DSI
683	depends on DRM_PANEL_SAMSUNG_S6E63M0
684	help
685	  Say Y here if you want to be able to access the Samsung
686	  S6E63M0 panel using DSI.
687
688config DRM_PANEL_SAMSUNG_S6E8AA0
689	tristate "Samsung S6E8AA0 DSI video mode panel"
690	depends on OF
691	select DRM_MIPI_DSI
692	select VIDEOMODE_HELPERS
693
694config DRM_PANEL_SAMSUNG_SOFEF00
695	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
696	depends on OF
697	depends on DRM_MIPI_DSI
698	depends on BACKLIGHT_CLASS_DEVICE
699	select VIDEOMODE_HELPERS
700	help
701	  Say Y or M here if you want to enable support for the Samsung AMOLED
702	  command mode panels found in the OnePlus 6/6T smartphones.
703
704	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
705
706config DRM_PANEL_SEIKO_43WVF1G
707	tristate "Seiko 43WVF1G panel"
708	depends on OF
709	depends on BACKLIGHT_CLASS_DEVICE
710	select VIDEOMODE_HELPERS
711	help
712	  Say Y here if you want to enable support for the Seiko
713	  43WVF1G controller for 800x480 LCD panels
714
715config DRM_PANEL_SHARP_LQ101R1SX01
716	tristate "Sharp LQ101R1SX01 panel"
717	depends on OF
718	depends on DRM_MIPI_DSI
719	depends on BACKLIGHT_CLASS_DEVICE
720	help
721	  Say Y here if you want to enable support for Sharp LQ101R1SX01
722	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
723	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
724	  the host and has a built-in LED backlight.
725
726	  To compile this driver as a module, choose M here: the module
727	  will be called panel-sharp-lq101r1sx01.
728
729config DRM_PANEL_SHARP_LS037V7DW01
730	tristate "Sharp LS037V7DW01 VGA LCD panel"
731	depends on GPIOLIB && OF && REGULATOR
732	help
733	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
734	  (480x640) LCD panel (found on the TI SDP3430 board).
735
736config DRM_PANEL_SHARP_LS043T1LE01
737	tristate "Sharp LS043T1LE01 qHD video mode panel"
738	depends on OF
739	depends on DRM_MIPI_DSI
740	depends on BACKLIGHT_CLASS_DEVICE
741	help
742	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
743	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
744
745config DRM_PANEL_SHARP_LS060T1SX01
746	tristate "Sharp LS060T1SX01 FullHD video mode panel"
747	depends on OF
748	depends on DRM_MIPI_DSI
749	depends on BACKLIGHT_CLASS_DEVICE
750	help
751	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
752	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
753	  Bundle.
754
755config DRM_PANEL_SITRONIX_ST7701
756	tristate "Sitronix ST7701 panel driver"
757	depends on OF
758	depends on DRM_MIPI_DSI
759	depends on BACKLIGHT_CLASS_DEVICE
760	help
761	  Say Y here if you want to enable support for the Sitronix
762	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
763	  system interfaces.
764
765config DRM_PANEL_SITRONIX_ST7703
766	tristate "Sitronix ST7703 based MIPI touchscreen panels"
767	depends on OF
768	depends on DRM_MIPI_DSI
769	depends on BACKLIGHT_CLASS_DEVICE
770	help
771	  Say Y here if you want to enable support for Sitronix ST7703 based
772	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
773	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
774	  in backlight and touch controller.
775	  Touch input support is provided by the goodix driver and needs to be
776	  selected separately.
777
778config DRM_PANEL_SITRONIX_ST7789V
779	tristate "Sitronix ST7789V panel"
780	depends on OF && SPI
781	depends on BACKLIGHT_CLASS_DEVICE
782	help
783	  Say Y here if you want to enable support for the Sitronix
784	  ST7789V controller for 240x320 LCD panels
785
786config DRM_PANEL_SONY_ACX565AKM
787	tristate "Sony ACX565AKM panel"
788	depends on GPIOLIB && OF && SPI
789	depends on BACKLIGHT_CLASS_DEVICE
790	help
791	  Say Y here if you want to enable support for the Sony ACX565AKM
792	  800x600 3.5" panel (found on the Nokia N900).
793
794config DRM_PANEL_SONY_TD4353_JDI
795	tristate "Sony TD4353 JDI panel"
796	depends on GPIOLIB && OF
797	depends on DRM_MIPI_DSI
798	depends on BACKLIGHT_CLASS_DEVICE
799	help
800	  Say Y here if you want to enable support for the Sony Tama
801	  TD4353 JDI command mode panel as found on some Sony Xperia
802	  XZ2 and XZ2 Compact smartphones.
803
804config DRM_PANEL_SONY_TULIP_TRULY_NT35521
805	tristate "Sony Tulip Truly NT35521 panel"
806	depends on GPIOLIB && OF
807	depends on DRM_MIPI_DSI
808	depends on BACKLIGHT_CLASS_DEVICE
809	help
810	  Say Y here if you want to enable support for the Sony Tulip
811	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
812	  Aqua phone.
813
814config DRM_PANEL_STARTEK_KD070FHFID015
815	tristate "STARTEK KD070FHFID015 panel"
816	depends on OF
817	depends on DRM_MIPI_DSI
818	depends on BACKLIGHT_CLASS_DEVICE
819	help
820	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
821	  based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
822	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
823	  the host, a built-in LED backlight and touch controller.
824
825config DRM_PANEL_EDP
826	tristate "support for simple Embedded DisplayPort panels"
827	depends on OF
828	depends on BACKLIGHT_CLASS_DEVICE
829	depends on PM
830	select VIDEOMODE_HELPERS
831	select DRM_DISPLAY_DP_HELPER
832	select DRM_DISPLAY_HELPER
833	select DRM_DISPLAY_DP_AUX_BUS
834	select DRM_KMS_HELPER
835	help
836	  DRM panel driver for dumb eDP panels that need at most a regulator and
837	  a GPIO to be powered up. Optionally a backlight can be attached so
838	  that it can be automatically turned off when the panel goes into a
839	  low power state.
840
841config DRM_PANEL_SIMPLE
842	tristate "support for simple panels (other than eDP ones)"
843	depends on OF
844	depends on BACKLIGHT_CLASS_DEVICE
845	depends on PM
846	select VIDEOMODE_HELPERS
847	help
848	  DRM panel driver for dumb non-eDP panels that need at most a regulator
849	  and a GPIO to be powered up. Optionally a backlight can be attached so
850	  that it can be automatically turned off when the panel goes into a
851	  low power state.
852
853config DRM_PANEL_SYNAPTICS_R63353
854	tristate "Synaptics R63353-based panels"
855	depends on OF
856	depends on DRM_MIPI_DSI
857	depends on BACKLIGHT_CLASS_DEVICE
858	help
859	  Say Y if you want to enable support for panels based on the
860	  Synaptics R63353 controller.
861
862config DRM_PANEL_TDO_TL070WSH30
863	tristate "TDO TL070WSH30 DSI panel"
864	depends on OF
865	depends on DRM_MIPI_DSI
866	depends on BACKLIGHT_CLASS_DEVICE
867	help
868	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
869	  panel module. The panel has a 1024×600 resolution and uses
870	  24 bit RGB per pixel. It provides a MIPI DSI interface to
871	  the host, a built-in LED backlight and touch controller.
872
873config DRM_PANEL_TPO_TD028TTEC1
874	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
875	depends on OF && SPI
876	depends on BACKLIGHT_CLASS_DEVICE
877	help
878	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
879	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
880
881config DRM_PANEL_TPO_TD043MTEA1
882	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
883	depends on GPIOLIB && OF && REGULATOR && SPI
884	help
885	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
886	  4.3" panel (found on the OMAP3 Pandora board).
887
888config DRM_PANEL_TPO_TPG110
889	tristate "TPO TPG 800x400 panel"
890	depends on OF && SPI && GPIOLIB
891	depends on BACKLIGHT_CLASS_DEVICE
892	help
893	  Say Y here if you want to enable support for TPO TPG110
894	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
895	  800x400 LCD panels.
896
897config DRM_PANEL_TRULY_NT35597_WQXGA
898	tristate "Truly WQXGA"
899	depends on OF
900	depends on DRM_MIPI_DSI
901	help
902	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
903	  Video Mode panel
904
905config DRM_PANEL_VISIONOX_R66451
906	tristate "Visionox R66451"
907	depends on OF
908	depends on DRM_MIPI_DSI
909	depends on BACKLIGHT_CLASS_DEVICE
910	select DRM_DISPLAY_DP_HELPER
911	select DRM_DISPLAY_HELPER
912	help
913	  Say Y here if you want to enable support for Visionox
914	  R66451 1080x2340 AMOLED DSI panel.
915
916config DRM_PANEL_VISIONOX_RM69299
917	tristate "Visionox RM69299"
918	depends on OF
919	depends on DRM_MIPI_DSI
920	help
921	  Say Y here if you want to enable support for Visionox
922	  RM69299  DSI Video Mode panel.
923
924config DRM_PANEL_VISIONOX_VTDR6130
925	tristate "Visionox VTDR6130"
926	depends on OF
927	depends on DRM_MIPI_DSI
928	depends on BACKLIGHT_CLASS_DEVICE
929	help
930	  Say Y here if you want to enable support for Visionox
931	  VTDR6130 1080x2400 AMOLED DSI panel.
932
933config DRM_PANEL_WIDECHIPS_WS2401
934	tristate "Widechips WS2401 DPI panel driver"
935	depends on SPI && GPIOLIB
936	depends on BACKLIGHT_CLASS_DEVICE
937	select DRM_MIPI_DBI
938	help
939	  Say Y here if you want to enable support for the Widechips WS2401 DPI
940	  480x800 display controller used in panels such as Samsung LMS380KF01.
941	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
942
943config DRM_PANEL_XINPENG_XPP055C272
944	tristate "Xinpeng XPP055C272 panel driver"
945	depends on OF
946	depends on DRM_MIPI_DSI
947	depends on BACKLIGHT_CLASS_DEVICE
948	help
949	  Say Y here if you want to enable support for the Xinpeng
950	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
951	  system interfaces.
952endmenu
953