1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_BOE_BF060Y8M_AJ0 41 tristate "Boe BF060Y8M-AJ0 panel" 42 depends on OF 43 depends on DRM_MIPI_DSI 44 depends on BACKLIGHT_CLASS_DEVICE 45 help 46 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 47 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 48 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 49 the host and backlight is controlled through DSI commands. 50 51config DRM_PANEL_BOE_HIMAX8279D 52 tristate "Boe Himax8279d panel" 53 depends on OF 54 depends on DRM_MIPI_DSI 55 depends on BACKLIGHT_CLASS_DEVICE 56 help 57 Say Y here if you want to enable support for Boe Himax8279d 58 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 59 24 bit RGB per pixel. It provides a MIPI DSI interface to 60 the host and has a built-in LED backlight. 61 62config DRM_PANEL_BOE_TV101WUM_NL6 63 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 64 depends on OF 65 depends on DRM_MIPI_DSI 66 depends on BACKLIGHT_CLASS_DEVICE 67 help 68 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 69 45NA WUXGA PANEL DSI Video Mode panel 70 71config DRM_PANEL_DSI_CM 72 tristate "Generic DSI command mode panels" 73 depends on OF 74 depends on DRM_MIPI_DSI 75 depends on BACKLIGHT_CLASS_DEVICE 76 help 77 DRM panel driver for DSI command mode panels with support for 78 embedded and external backlights. 79 80config DRM_PANEL_LVDS 81 tristate "Generic LVDS panel driver" 82 depends on OF 83 depends on BACKLIGHT_CLASS_DEVICE 84 select VIDEOMODE_HELPERS 85 help 86 This driver supports LVDS panels that don't require device-specific 87 handling of power supplies or control signals. It implements automatic 88 backlight handling if the panel is attached to a backlight controller. 89 90config DRM_PANEL_SIMPLE 91 tristate "support for simple panels (other than eDP ones)" 92 depends on OF 93 depends on BACKLIGHT_CLASS_DEVICE 94 depends on PM 95 select VIDEOMODE_HELPERS 96 help 97 DRM panel driver for dumb non-eDP panels that need at most a regulator 98 and a GPIO to be powered up. Optionally a backlight can be attached so 99 that it can be automatically turned off when the panel goes into a 100 low power state. 101 102config DRM_PANEL_EDP 103 tristate "support for simple Embedded DisplayPort panels" 104 depends on OF 105 depends on BACKLIGHT_CLASS_DEVICE 106 depends on PM 107 select VIDEOMODE_HELPERS 108 select DRM_DISPLAY_DP_HELPER 109 select DRM_DISPLAY_HELPER 110 select DRM_DP_AUX_BUS 111 select DRM_KMS_HELPER 112 help 113 DRM panel driver for dumb eDP panels that need at most a regulator and 114 a GPIO to be powered up. Optionally a backlight can be attached so 115 that it can be automatically turned off when the panel goes into a 116 low power state. 117 118config DRM_PANEL_EBBG_FT8719 119 tristate "EBBG FT8719 panel driver" 120 depends on OF 121 depends on DRM_MIPI_DSI 122 depends on BACKLIGHT_CLASS_DEVICE 123 help 124 Say Y here if you want to enable support for the EBBG FT8719 125 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 126 The panel has a resolution of 1080x2246. It provides a MIPI DSI 127 interface to the host. 128 129config DRM_PANEL_ELIDA_KD35T133 130 tristate "Elida KD35T133 panel driver" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 Say Y here if you want to enable support for the Elida 136 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 137 system interfaces. 138 139config DRM_PANEL_FEIXIN_K101_IM2BA02 140 tristate "Feixin K101 IM2BA02 panel" 141 depends on OF 142 depends on DRM_MIPI_DSI 143 depends on BACKLIGHT_CLASS_DEVICE 144 help 145 Say Y here if you want to enable support for the Feixin K101 IM2BA02 146 4-lane 800x1280 MIPI DSI panel. 147 148config DRM_PANEL_FEIYANG_FY07024DI26A30D 149 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 150 depends on OF 151 depends on DRM_MIPI_DSI 152 depends on BACKLIGHT_CLASS_DEVICE 153 help 154 Say Y if you want to enable support for panels based on the 155 Feiyang FY07024DI26A30-D MIPI-DSI interface. 156 157config DRM_PANEL_ILITEK_IL9322 158 tristate "Ilitek ILI9322 320x240 QVGA panels" 159 depends on OF && SPI 160 select REGMAP 161 help 162 Say Y here if you want to enable support for Ilitek IL9322 163 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 164 165config DRM_PANEL_ILITEK_ILI9341 166 tristate "Ilitek ILI9341 240x320 QVGA panels" 167 depends on OF && SPI 168 select DRM_KMS_HELPER 169 select DRM_GEM_DMA_HELPER 170 depends on BACKLIGHT_CLASS_DEVICE 171 select DRM_MIPI_DBI 172 help 173 Say Y here if you want to enable support for Ilitek IL9341 174 QVGA (240x320) RGB panels. support serial & parallel rgb 175 interface. 176 177config DRM_PANEL_ILITEK_ILI9881C 178 tristate "Ilitek ILI9881C-based panels" 179 depends on OF 180 depends on DRM_MIPI_DSI 181 depends on BACKLIGHT_CLASS_DEVICE 182 help 183 Say Y if you want to enable support for panels based on the 184 Ilitek ILI9881c controller. 185 186config DRM_PANEL_INNOLUX_EJ030NA 187 tristate "Innolux EJ030NA 320x480 LCD panel" 188 depends on OF && SPI 189 select REGMAP_SPI 190 help 191 Say Y here to enable support for the Innolux/Chimei EJ030NA 192 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 193 and LDK handheld gaming consoles. 194 195config DRM_PANEL_INNOLUX_P079ZCA 196 tristate "Innolux P079ZCA panel" 197 depends on OF 198 depends on DRM_MIPI_DSI 199 depends on BACKLIGHT_CLASS_DEVICE 200 help 201 Say Y here if you want to enable support for Innolux P079ZCA 202 TFT-LCD modules. The panel has a 1024x768 resolution and uses 203 24 bit RGB per pixel. It provides a MIPI DSI interface to 204 the host and has a built-in LED backlight. 205 206config DRM_PANEL_JADARD_JD9365DA_H3 207 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 208 depends on OF 209 depends on DRM_MIPI_DSI 210 depends on BACKLIGHT_CLASS_DEVICE 211 help 212 Say Y here if you want to enable support for Jadard JD9365DA-H3 213 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 214 800RGBx1280 dots at maximum. 215 216config DRM_PANEL_JDI_LT070ME05000 217 tristate "JDI LT070ME05000 WUXGA DSI panel" 218 depends on OF 219 depends on DRM_MIPI_DSI 220 depends on BACKLIGHT_CLASS_DEVICE 221 help 222 Say Y here if you want to enable support for JDI DSI video mode 223 panel as found in Google Nexus 7 (2013) devices. 224 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 225 24 bit per pixel. 226 227config DRM_PANEL_JDI_R63452 228 tristate "JDI R63452 Full HD DSI panel" 229 depends on OF 230 depends on DRM_MIPI_DSI 231 depends on BACKLIGHT_CLASS_DEVICE 232 help 233 Say Y here if you want to enable support for the JDI R63452 234 DSI command mode panel as found in Xiaomi Mi 5 Devices. 235 236config DRM_PANEL_KHADAS_TS050 237 tristate "Khadas TS050 panel" 238 depends on OF 239 depends on DRM_MIPI_DSI 240 depends on BACKLIGHT_CLASS_DEVICE 241 help 242 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 243 panel module. The panel has a 1080x1920 resolution and uses 244 24 bit RGB per pixel. It provides a MIPI DSI interface to 245 the host, a built-in LED backlight and touch controller. 246 247config DRM_PANEL_KINGDISPLAY_KD097D04 248 tristate "Kingdisplay kd097d04 panel" 249 depends on OF 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for Kingdisplay kd097d04 254 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 255 24 bit RGB per pixel. It provides a MIPI DSI interface to 256 the host and has a built-in LED backlight. 257 258config DRM_PANEL_LEADTEK_LTK050H3146W 259 tristate "Leadtek LTK050H3146W panel" 260 depends on OF 261 depends on DRM_MIPI_DSI 262 depends on BACKLIGHT_CLASS_DEVICE 263 help 264 Say Y here if you want to enable support for Leadtek LTK050H3146W 265 TFT-LCD modules. The panel has a 720x1280 resolution and uses 266 24 bit RGB per pixel. It provides a MIPI DSI interface to 267 the host and has a built-in LED backlight. 268 269config DRM_PANEL_LEADTEK_LTK500HD1829 270 tristate "Leadtek LTK500HD1829 panel" 271 depends on OF 272 depends on DRM_MIPI_DSI 273 depends on BACKLIGHT_CLASS_DEVICE 274 help 275 Say Y here if you want to enable support for Kingdisplay kd097d04 276 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 277 24 bit RGB per pixel. It provides a MIPI DSI interface to 278 the host and has a built-in LED backlight. 279 280config DRM_PANEL_SAMSUNG_LD9040 281 tristate "Samsung LD9040 RGB/SPI panel" 282 depends on OF && SPI 283 select VIDEOMODE_HELPERS 284 285config DRM_PANEL_LG_LB035Q02 286 tristate "LG LB035Q024573 RGB panel" 287 depends on GPIOLIB && OF && SPI 288 help 289 Say Y here if you want to enable support for the LB035Q02 RGB panel 290 (found on the Gumstix Overo Palo35 board). To compile this driver as 291 a module, choose M here. 292 293config DRM_PANEL_LG_LG4573 294 tristate "LG4573 RGB/SPI panel" 295 depends on OF && SPI 296 select VIDEOMODE_HELPERS 297 help 298 Say Y here if you want to enable support for LG4573 RGB panel. 299 To compile this driver as a module, choose M here. 300 301config DRM_PANEL_NEC_NL8048HL11 302 tristate "NEC NL8048HL11 RGB panel" 303 depends on GPIOLIB && OF && SPI 304 help 305 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 306 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 307 as a module, choose M here. 308 309config DRM_PANEL_NEWVISION_NV3051D 310 tristate "NewVision NV3051D DSI panel" 311 depends on OF 312 depends on DRM_MIPI_DSI 313 depends on BACKLIGHT_CLASS_DEVICE 314 help 315 This driver supports the NV3051D based panel found on the Anbernic 316 RG353P and RG353V. 317 318config DRM_PANEL_NEWVISION_NV3052C 319 tristate "NewVision NV3052C RGB/SPI panel" 320 depends on OF && SPI 321 depends on BACKLIGHT_CLASS_DEVICE 322 select DRM_MIPI_DBI 323 help 324 Say Y here if you want to enable support for the panels built 325 around the NewVision NV3052C display controller. 326 327config DRM_PANEL_NOVATEK_NT35510 328 tristate "Novatek NT35510 RGB panel driver" 329 depends on OF 330 depends on DRM_MIPI_DSI 331 depends on BACKLIGHT_CLASS_DEVICE 332 help 333 Say Y here if you want to enable support for the panels built 334 around the Novatek NT35510 display controller, such as some 335 Hydis panels. 336 337config DRM_PANEL_NOVATEK_NT35560 338 tristate "Novatek NT35560 DSI command mode panel" 339 depends on OF 340 depends on DRM_MIPI_DSI 341 depends on BACKLIGHT_CLASS_DEVICE 342 select VIDEOMODE_HELPERS 343 help 344 Say Y here if you want to enable the Novatek NT35560 display 345 controller. This panel supports DSI in both command and video 346 mode. This supports several panels such as Sony ACX424AKM and 347 ACX424AKP. 348 349config DRM_PANEL_NOVATEK_NT35950 350 tristate "Novatek NT35950 DSI panel" 351 depends on OF 352 depends on DRM_MIPI_DSI 353 depends on BACKLIGHT_CLASS_DEVICE 354 help 355 Say Y here if you want to enable support for the panels built 356 around the Novatek NT35950 display controller, such as some 357 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 358 mobile phones. 359 360config DRM_PANEL_NOVATEK_NT36672A 361 tristate "Novatek NT36672A DSI panel" 362 depends on OF 363 depends on DRM_MIPI_DSI 364 depends on BACKLIGHT_CLASS_DEVICE 365 help 366 Say Y here if you want to enable support for the panels built 367 around the Novatek NT36672A display controller, such as some 368 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 369 370config DRM_PANEL_NOVATEK_NT39016 371 tristate "Novatek NT39016 RGB/SPI panel" 372 depends on OF && SPI 373 depends on BACKLIGHT_CLASS_DEVICE 374 select REGMAP_SPI 375 help 376 Say Y here if you want to enable support for the panels built 377 around the Novatek NT39016 display controller. 378 379config DRM_PANEL_MANTIX_MLAF057WE51 380 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 381 depends on OF 382 depends on DRM_MIPI_DSI 383 depends on BACKLIGHT_CLASS_DEVICE 384 help 385 Say Y here if you want to enable support for the Mantix 386 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 387 has a resolution of 720x1440 pixels, a built in backlight and touch 388 controller. 389 390config DRM_PANEL_OLIMEX_LCD_OLINUXINO 391 tristate "Olimex LCD-OLinuXino panel" 392 depends on OF 393 depends on I2C 394 depends on BACKLIGHT_CLASS_DEVICE 395 select CRC32 396 help 397 The panel is used with different sizes LCDs, from 480x272 to 398 1280x800, and 24 bit per pixel. 399 400 Say Y here if you want to enable support for Olimex Ltd. 401 LCD-OLinuXino panel. 402 403config DRM_PANEL_ORISETECH_OTM8009A 404 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 405 depends on OF 406 depends on DRM_MIPI_DSI 407 depends on BACKLIGHT_CLASS_DEVICE 408 help 409 Say Y here if you want to enable support for Orise Technology 410 otm8009a 480x800 dsi 2dl panel. 411 412config DRM_PANEL_OSD_OSD101T2587_53TS 413 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 414 depends on OF 415 depends on DRM_MIPI_DSI 416 depends on BACKLIGHT_CLASS_DEVICE 417 help 418 Say Y here if you want to enable support for One Stop Displays 419 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 420 421config DRM_PANEL_PANASONIC_VVX10F034N00 422 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 423 depends on OF 424 depends on DRM_MIPI_DSI 425 depends on BACKLIGHT_CLASS_DEVICE 426 help 427 Say Y here if you want to enable support for Panasonic VVX10F034N00 428 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 429 Xperia Z2 tablets 430 431config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 432 tristate "Raspberry Pi 7-inch touchscreen panel" 433 depends on DRM_MIPI_DSI 434 help 435 Say Y here if you want to enable support for the Raspberry 436 Pi 7" Touchscreen. To compile this driver as a module, 437 choose M here. 438 439config DRM_PANEL_RAYDIUM_RM67191 440 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 441 depends on OF 442 depends on DRM_MIPI_DSI 443 depends on BACKLIGHT_CLASS_DEVICE 444 help 445 Say Y here if you want to enable support for Raydium RM67191 FHD 446 (1080x1920) DSI panel. 447 448config DRM_PANEL_RAYDIUM_RM68200 449 tristate "Raydium RM68200 720x1280 DSI video mode panel" 450 depends on OF 451 depends on DRM_MIPI_DSI 452 depends on BACKLIGHT_CLASS_DEVICE 453 help 454 Say Y here if you want to enable support for Raydium RM68200 455 720x1280 DSI video mode panel. 456 457config DRM_PANEL_RONBO_RB070D30 458 tristate "Ronbo Electronics RB070D30 panel" 459 depends on OF 460 depends on DRM_MIPI_DSI 461 depends on BACKLIGHT_CLASS_DEVICE 462 help 463 Say Y here if you want to enable support for Ronbo Electronics 464 RB070D30 1024x600 DSI panel. 465 466config DRM_PANEL_SAMSUNG_ATNA33XC20 467 tristate "Samsung ATNA33XC20 eDP panel" 468 depends on OF 469 depends on BACKLIGHT_CLASS_DEVICE 470 depends on PM 471 select DRM_DISPLAY_DP_HELPER 472 select DRM_DISPLAY_HELPER 473 select DRM_DP_AUX_BUS 474 help 475 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 476 be handled by the DRM_PANEL_SIMPLE driver because its power 477 sequencing is non-standard. 478 479config DRM_PANEL_SAMSUNG_DB7430 480 tristate "Samsung DB7430-based DPI panels" 481 depends on OF && SPI && GPIOLIB 482 depends on BACKLIGHT_CLASS_DEVICE 483 select DRM_MIPI_DBI 484 help 485 Say Y here if you want to enable support for the Samsung 486 DB7430 DPI display controller used in such devices as the 487 LMS397KF04 480x800 DPI panel. 488 489config DRM_PANEL_SAMSUNG_S6D16D0 490 tristate "Samsung S6D16D0 DSI video mode panel" 491 depends on OF 492 depends on DRM_MIPI_DSI 493 select VIDEOMODE_HELPERS 494 495config DRM_PANEL_SAMSUNG_S6D27A1 496 tristate "Samsung S6D27A1 DPI panel driver" 497 depends on OF && SPI && GPIOLIB 498 select DRM_MIPI_DBI 499 help 500 Say Y here if you want to enable support for the Samsung 501 S6D27A1 DPI 480x800 panel. 502 503 This panel can be found in Samsung Galaxy Ace 2 504 GT-I8160 mobile phone. 505 506config DRM_PANEL_SAMSUNG_S6E3HA2 507 tristate "Samsung S6E3HA2 DSI video mode panel" 508 depends on OF 509 depends on DRM_MIPI_DSI 510 depends on BACKLIGHT_CLASS_DEVICE 511 select VIDEOMODE_HELPERS 512 513config DRM_PANEL_SAMSUNG_S6E63J0X03 514 tristate "Samsung S6E63J0X03 DSI command mode panel" 515 depends on OF 516 depends on DRM_MIPI_DSI 517 depends on BACKLIGHT_CLASS_DEVICE 518 select VIDEOMODE_HELPERS 519 520config DRM_PANEL_SAMSUNG_S6E63M0 521 tristate "Samsung S6E63M0 RGB panel" 522 depends on OF 523 depends on BACKLIGHT_CLASS_DEVICE 524 help 525 Say Y here if you want to enable support for Samsung S6E63M0 526 AMOLED LCD panel. This panel can be accessed using SPI or 527 DSI. 528 529config DRM_PANEL_SAMSUNG_S6E63M0_SPI 530 tristate "Samsung S6E63M0 RGB SPI interface" 531 depends on SPI 532 depends on DRM_PANEL_SAMSUNG_S6E63M0 533 default DRM_PANEL_SAMSUNG_S6E63M0 534 select DRM_MIPI_DBI 535 help 536 Say Y here if you want to be able to access the Samsung 537 S6E63M0 panel using SPI. 538 539config DRM_PANEL_SAMSUNG_S6E63M0_DSI 540 tristate "Samsung S6E63M0 RGB DSI interface" 541 depends on DRM_MIPI_DSI 542 depends on DRM_PANEL_SAMSUNG_S6E63M0 543 help 544 Say Y here if you want to be able to access the Samsung 545 S6E63M0 panel using DSI. 546 547config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 548 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 549 depends on OF 550 select DRM_MIPI_DSI 551 select VIDEOMODE_HELPERS 552 553config DRM_PANEL_SAMSUNG_S6E8AA0 554 tristate "Samsung S6E8AA0 DSI video mode panel" 555 depends on OF 556 select DRM_MIPI_DSI 557 select VIDEOMODE_HELPERS 558 559config DRM_PANEL_SAMSUNG_SOFEF00 560 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 561 depends on OF 562 depends on DRM_MIPI_DSI 563 depends on BACKLIGHT_CLASS_DEVICE 564 select VIDEOMODE_HELPERS 565 help 566 Say Y or M here if you want to enable support for the Samsung AMOLED 567 command mode panels found in the OnePlus 6/6T smartphones. 568 569 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 570 571config DRM_PANEL_SEIKO_43WVF1G 572 tristate "Seiko 43WVF1G panel" 573 depends on OF 574 depends on BACKLIGHT_CLASS_DEVICE 575 select VIDEOMODE_HELPERS 576 help 577 Say Y here if you want to enable support for the Seiko 578 43WVF1G controller for 800x480 LCD panels 579 580config DRM_PANEL_SHARP_LQ101R1SX01 581 tristate "Sharp LQ101R1SX01 panel" 582 depends on OF 583 depends on DRM_MIPI_DSI 584 depends on BACKLIGHT_CLASS_DEVICE 585 help 586 Say Y here if you want to enable support for Sharp LQ101R1SX01 587 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 588 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 589 the host and has a built-in LED backlight. 590 591 To compile this driver as a module, choose M here: the module 592 will be called panel-sharp-lq101r1sx01. 593 594config DRM_PANEL_SHARP_LS037V7DW01 595 tristate "Sharp LS037V7DW01 VGA LCD panel" 596 depends on GPIOLIB && OF && REGULATOR 597 help 598 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 599 (480x640) LCD panel (found on the TI SDP3430 board). 600 601config DRM_PANEL_SHARP_LS043T1LE01 602 tristate "Sharp LS043T1LE01 qHD video mode panel" 603 depends on OF 604 depends on DRM_MIPI_DSI 605 depends on BACKLIGHT_CLASS_DEVICE 606 help 607 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 608 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 609 610config DRM_PANEL_SHARP_LS060T1SX01 611 tristate "Sharp LS060T1SX01 FullHD video mode panel" 612 depends on OF 613 depends on DRM_MIPI_DSI 614 depends on BACKLIGHT_CLASS_DEVICE 615 help 616 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 617 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 618 Bundle. 619 620config DRM_PANEL_SITRONIX_ST7701 621 tristate "Sitronix ST7701 panel driver" 622 depends on OF 623 depends on DRM_MIPI_DSI 624 depends on BACKLIGHT_CLASS_DEVICE 625 help 626 Say Y here if you want to enable support for the Sitronix 627 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 628 system interfaces. 629 630config DRM_PANEL_SITRONIX_ST7703 631 tristate "Sitronix ST7703 based MIPI touchscreen panels" 632 depends on OF 633 depends on DRM_MIPI_DSI 634 depends on BACKLIGHT_CLASS_DEVICE 635 help 636 Say Y here if you want to enable support for Sitronix ST7703 based 637 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 638 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 639 in backlight and touch controller. 640 Touch input support is provided by the goodix driver and needs to be 641 selected separately. 642 643config DRM_PANEL_SITRONIX_ST7789V 644 tristate "Sitronix ST7789V panel" 645 depends on OF && SPI 646 depends on BACKLIGHT_CLASS_DEVICE 647 help 648 Say Y here if you want to enable support for the Sitronix 649 ST7789V controller for 240x320 LCD panels 650 651config DRM_PANEL_SONY_ACX565AKM 652 tristate "Sony ACX565AKM panel" 653 depends on GPIOLIB && OF && SPI 654 depends on BACKLIGHT_CLASS_DEVICE 655 help 656 Say Y here if you want to enable support for the Sony ACX565AKM 657 800x600 3.5" panel (found on the Nokia N900). 658 659config DRM_PANEL_SONY_TULIP_TRULY_NT35521 660 tristate "Sony Tulip Truly NT35521 panel" 661 depends on GPIOLIB && OF 662 depends on DRM_MIPI_DSI 663 depends on BACKLIGHT_CLASS_DEVICE 664 help 665 Say Y here if you want to enable support for the Sony Tulip 666 NT35521 1280x720 video mode panel as found on Sony Xperia M4 667 Aqua phone. 668 669config DRM_PANEL_TDO_TL070WSH30 670 tristate "TDO TL070WSH30 DSI panel" 671 depends on OF 672 depends on DRM_MIPI_DSI 673 depends on BACKLIGHT_CLASS_DEVICE 674 help 675 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 676 panel module. The panel has a 1024×600 resolution and uses 677 24 bit RGB per pixel. It provides a MIPI DSI interface to 678 the host, a built-in LED backlight and touch controller. 679 680config DRM_PANEL_TPO_TD028TTEC1 681 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 682 depends on OF && SPI 683 depends on BACKLIGHT_CLASS_DEVICE 684 help 685 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 686 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 687 688config DRM_PANEL_TPO_TD043MTEA1 689 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 690 depends on GPIOLIB && OF && REGULATOR && SPI 691 help 692 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 693 4.3" panel (found on the OMAP3 Pandora board). 694 695config DRM_PANEL_TPO_TPG110 696 tristate "TPO TPG 800x400 panel" 697 depends on OF && SPI && GPIOLIB 698 depends on BACKLIGHT_CLASS_DEVICE 699 help 700 Say Y here if you want to enable support for TPO TPG110 701 400CH LTPS TFT LCD Single Chip Digital Driver for up to 702 800x400 LCD panels. 703 704config DRM_PANEL_TRULY_NT35597_WQXGA 705 tristate "Truly WQXGA" 706 depends on OF 707 depends on DRM_MIPI_DSI 708 help 709 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 710 Video Mode panel 711 712config DRM_PANEL_VISIONOX_RM69299 713 tristate "Visionox RM69299" 714 depends on OF 715 depends on DRM_MIPI_DSI 716 help 717 Say Y here if you want to enable support for Visionox 718 RM69299 DSI Video Mode panel. 719 720config DRM_PANEL_WIDECHIPS_WS2401 721 tristate "Widechips WS2401 DPI panel driver" 722 depends on SPI && GPIOLIB 723 depends on BACKLIGHT_CLASS_DEVICE 724 select DRM_MIPI_DBI 725 help 726 Say Y here if you want to enable support for the Widechips WS2401 DPI 727 480x800 display controller used in panels such as Samsung LMS380KF01. 728 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 729 730config DRM_PANEL_XINPENG_XPP055C272 731 tristate "Xinpeng XPP055C272 panel driver" 732 depends on OF 733 depends on DRM_MIPI_DSI 734 depends on BACKLIGHT_CLASS_DEVICE 735 help 736 Say Y here if you want to enable support for the Xinpeng 737 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 738 system interfaces. 739endmenu 740