xref: /linux/drivers/gpu/drm/panel/Kconfig (revision 99e9aca83bfb867ae780f58d076bb89dd5c2681d) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ANBERNIC_TD4310
21	tristate "Anbernic TD4310 LCD panel"
22	depends on GPIOLIB && OF
23	depends on DRM_MIPI_DSI
24	depends on BACKLIGHT_CLASS_DEVICE
25	help
26	  Say Y here to enable support for Anbernic designed panels with the
27	  TD4310 panel controller such as the ones used on the Anbernic RG
28	  Vita Pro.
29
30config DRM_PANEL_ARM_VERSATILE
31	tristate "ARM Versatile panel driver"
32	depends on OF
33	depends on MFD_SYSCON
34	select VIDEOMODE_HELPERS
35	help
36	  This driver supports the ARM Versatile panels connected to ARM
37	  reference designs. The panel is detected using special registers
38	  in the Versatile family syscon registers.
39
40config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
41	tristate "ASUS Z00T TM5P5 NT35596 panel"
42	depends on GPIOLIB && OF
43	depends on DRM_MIPI_DSI
44	depends on BACKLIGHT_CLASS_DEVICE
45	help
46	  Say Y here if you want to enable support for the ASUS TMP5P5
47	  NT35596 1080x1920 video mode panel as found in some Asus
48	  Zenfone 2 Laser Z00T devices.
49
50config DRM_PANEL_AUO_A030JTN01
51	tristate "AUO A030JTN01"
52	depends on SPI
53	select REGMAP_SPI
54	help
55	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
56	  as found in the YLM RS-97 handheld gaming console.
57
58config DRM_PANEL_BOE_BF060Y8M_AJ0
59	tristate "Boe BF060Y8M-AJ0 panel"
60	depends on OF
61	depends on DRM_MIPI_DSI
62	depends on BACKLIGHT_CLASS_DEVICE
63	help
64	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
65	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
66	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
67	  the host and backlight is controlled through DSI commands.
68
69config DRM_PANEL_BOE_HIMAX8279D
70	tristate "Boe Himax8279d panel"
71	depends on OF
72	depends on DRM_MIPI_DSI
73	depends on BACKLIGHT_CLASS_DEVICE
74	help
75	  Say Y here if you want to enable support for Boe Himax8279d
76	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
77	  24 bit RGB per pixel. It provides a MIPI DSI interface to
78	  the host and has a built-in LED backlight.
79
80config DRM_PANEL_BOE_TD4320
81	tristate "BOE TD4320 DSI panel"
82	depends on OF
83	depends on DRM_MIPI_DSI
84	depends on BACKLIGHT_CLASS_DEVICE
85	help
86	  Say Y here if you want to enable support for BOE TD4320 1080x2340
87	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
88
89config DRM_PANEL_BOE_TH101MB31UIG002_28A
90	tristate "Boe TH101MB31UIG002-28A panel"
91	depends on OF
92	depends on DRM_MIPI_DSI
93	depends on BACKLIGHT_CLASS_DEVICE
94	help
95	  Say Y here if you want to enable support for Boe
96	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
97	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
98	  interface to the host and has a built-in LED backlight.
99
100config DRM_PANEL_BOE_TV101WUM_NL6
101	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
102	depends on OF
103	depends on DRM_MIPI_DSI
104	depends on BACKLIGHT_CLASS_DEVICE
105	help
106	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
107	  45NA WUXGA PANEL DSI Video Mode panel
108
109config DRM_PANEL_BOE_TV101WUM_LL2
110	tristate "BOE TV101WUM LL2 1200x1920 panel"
111	depends on OF
112	depends on DRM_MIPI_DSI
113	depends on BACKLIGHT_CLASS_DEVICE
114	help
115	  Say Y here if you want to support for BOE TV101WUM-LL2
116	  WUXGA PANEL DSI Video Mode panel
117
118config DRM_PANEL_CHIPONE_ICNA35XX
119	tristate "Chipone ICNA35XX panel driver"
120	depends on OF
121	depends on DRM_MIPI_DSI
122	depends on BACKLIGHT_CLASS_DEVICE
123	select DRM_DISPLAY_HELPER
124	help
125	  Say Y here if you want to enable support for the panels built
126	  around the Chipone ICNA3512 and ICNA3520 display controllers,
127	  such as some Tianma panels used in AYN Odin2 Portal and Thor.
128
129config DRM_PANEL_CHIPWEALTH_CH13726A
130	tristate "CHIPWEALTH CH13726A-based DSI panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	select DRM_DISPLAY_DP_HELPER
135	select DRM_DISPLAY_HELPER
136	help
137	  Say Y here if you want to enable support for ChipWealth
138	  CH13726A-based display panels.
139
140config DRM_PANEL_EBBG_FT8719
141	tristate "EBBG FT8719 panel driver"
142	depends on GPIOLIB
143	depends on OF
144	depends on DRM_MIPI_DSI
145	depends on BACKLIGHT_CLASS_DEVICE
146	help
147	  Say Y here if you want to enable support for the EBBG FT8719
148	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
149	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
150	  interface to the host.
151
152config DRM_PANEL_ELIDA_KD35T133
153	tristate "Elida KD35T133 panel driver"
154	depends on OF
155	depends on DRM_MIPI_DSI
156	depends on BACKLIGHT_CLASS_DEVICE
157	help
158	  Say Y here if you want to enable support for the Elida
159	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
160	  system interfaces.
161
162config DRM_PANEL_FEIXIN_K101_IM2BA02
163	tristate "Feixin K101 IM2BA02 panel"
164	depends on OF
165	depends on DRM_MIPI_DSI
166	depends on BACKLIGHT_CLASS_DEVICE
167	help
168	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
169	  4-lane 800x1280 MIPI DSI panel.
170
171config DRM_PANEL_FEIYANG_FY07024DI26A30D
172	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
173	depends on OF
174	depends on DRM_MIPI_DSI
175	depends on BACKLIGHT_CLASS_DEVICE
176	help
177	  Say Y if you want to enable support for panels based on the
178	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
179
180config DRM_PANEL_FOCALTECH_OTA7290B
181	tristate "Focaltech OTA7290B"
182	depends on DRM_MIPI_DSI
183	depends on I2C
184	depends on BACKLIGHT_CLASS_DEVICE
185	select DRM_KMS_HELPER
186	help
187	  Enable support for panels using OTA7290B as a controller (for
188	  example, Waveshare 12.3" DSI TOUCH-A panel). Say Y here if you want
189	  to enable support for this panel. To compile this driver as a module,
190	  choose M here.
191
192config DRM_PANEL_DSI_CM
193	tristate "Generic DSI command mode panels"
194	depends on OF
195	depends on DRM_MIPI_DSI
196	depends on BACKLIGHT_CLASS_DEVICE
197	help
198	  DRM panel driver for DSI command mode panels with support for
199	  embedded and external backlights.
200
201config DRM_PANEL_LVDS
202	tristate "Generic LVDS panel driver"
203	depends on OF
204	depends on BACKLIGHT_CLASS_DEVICE
205	select VIDEOMODE_HELPERS
206	help
207	  This driver supports LVDS panels that don't require device-specific
208	  handling of power supplies or control signals. It implements automatic
209	  backlight handling if the panel is attached to a backlight controller.
210
211config DRM_PANEL_HIMAX_HX8279
212	tristate "Himax HX8279-based panels"
213	depends on OF
214	depends on DRM_MIPI_DSI
215	depends on BACKLIGHT_CLASS_DEVICE
216	help
217	  Say Y if you want to enable support for panels based on the
218	  Himax HX8279 controller, such as the Startek KD070FHFID078
219	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
220	  and others.
221
222config DRM_PANEL_HIMAX_HX83102
223	tristate "Himax HX83102-based panels"
224	depends on OF
225	depends on DRM_MIPI_DSI
226	depends on BACKLIGHT_CLASS_DEVICE
227	help
228	  Say Y if you want to enable support for panels based on the
229	  Himax HX83102 controller.
230
231config DRM_PANEL_HIMAX_HX83112A
232	tristate "Himax HX83112A-based DSI panel"
233	depends on OF
234	depends on DRM_MIPI_DSI
235	depends on BACKLIGHT_CLASS_DEVICE
236	select DRM_KMS_HELPER
237	help
238	  Say Y here if you want to enable support for Himax HX83112A-based
239	  display panels, such as the one found in the Fairphone 4 smartphone.
240
241config DRM_PANEL_HIMAX_HX83112B
242	tristate "Himax HX83112B-based DSI panel"
243	depends on OF
244	depends on DRM_MIPI_DSI
245	depends on BACKLIGHT_CLASS_DEVICE
246	select DRM_KMS_HELPER
247	help
248	  Say Y here if you want to enable support for Himax HX83112B-based
249	  display panels, such as the one found in the Fairphone 3 smartphone.
250
251config DRM_PANEL_HIMAX_HX83121A
252	tristate "Himax HX83121A-based DSI panel"
253	depends on OF
254	depends on DRM_MIPI_DSI
255	depends on BACKLIGHT_CLASS_DEVICE
256	select DRM_DISPLAY_DSC_HELPER
257	select DRM_KMS_HELPER
258	help
259	  Say Y here if you want to enable support for Himax HX83121A-based
260	  display panels, such as the one found in the HUAWEI Matebook E Go
261          series.
262
263config DRM_PANEL_HIMAX_HX8394
264	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
265	depends on OF
266	depends on DRM_MIPI_DSI
267	depends on BACKLIGHT_CLASS_DEVICE
268	help
269	  Say Y if you want to enable support for panels based on the
270	  Himax HX8394 controller, such as the HannStar HSD060BHW4
271	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
272
273	  If M is selected the module will be called panel-himax-hx8394.
274
275config DRM_PANEL_HYDIS_HV101HD1
276	tristate "Hydis HV101HD1 panel"
277	depends on OF
278	depends on DRM_MIPI_DSI
279	depends on BACKLIGHT_CLASS_DEVICE
280	help
281	  Say Y here if you want to enable support for the Hydis HV101HD1
282	  2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT TF600T.
283	  HV101HD1 is a color active matrix TFT LCD module using amorphous
284	  silicon TFT's (Thin Film Transistors) as an active switching devices.
285
286	  If M is selected the module will be called panel-hydis-hv101hd1
287
288config DRM_PANEL_ILITEK_IL9322
289	tristate "Ilitek ILI9322 320x240 QVGA panels"
290	depends on OF && SPI
291	select REGMAP
292	help
293	  Say Y here if you want to enable support for Ilitek IL9322
294	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
295
296config DRM_PANEL_ILITEK_ILI9341
297	tristate "Ilitek ILI9341 240x320 QVGA panels"
298	depends on SPI
299	select DRM_KMS_HELPER
300	select DRM_GEM_DMA_HELPER
301	depends on BACKLIGHT_CLASS_DEVICE
302	select DRM_MIPI_DBI
303	help
304	  Say Y here if you want to enable support for Ilitek IL9341
305	  QVGA (240x320) RGB panels. support serial & parallel rgb
306	  interface.
307
308config DRM_PANEL_ILITEK_ILI9488
309	tristate "Ilitek ILI9488-based panels"
310	depends on OF
311	depends on DRM_MIPI_DSI
312	depends on BACKLIGHT_CLASS_DEVICE
313	help
314	  Say Y if you want to enable support for panels based on the
315	  Ilitek ILI9488 controller.
316
317config DRM_PANEL_ILITEK_ILI9805
318	tristate "Ilitek ILI9805-based panels"
319	depends on OF
320	depends on DRM_MIPI_DSI
321	depends on BACKLIGHT_CLASS_DEVICE
322	help
323	  Say Y if you want to enable support for panels based on the
324	  Ilitek ILI9805 controller.
325
326config DRM_PANEL_ILITEK_ILI9806E_CORE
327	tristate
328
329config DRM_PANEL_ILITEK_ILI9806E_DSI
330	tristate "Ilitek ILI9806E-based DSI panels"
331	depends on OF
332	depends on DRM_MIPI_DSI
333	depends on BACKLIGHT_CLASS_DEVICE
334	select DRM_PANEL_ILITEK_ILI9806E_CORE
335	help
336	  Say Y if you want to enable support for panels based on the
337	  Ilitek ILI9806E controller using DSI.
338
339config DRM_PANEL_ILITEK_ILI9806E_SPI
340	tristate "Ilitek ILI9806E-based RGB SPI panel"
341	depends on OF
342	depends on SPI
343	depends on BACKLIGHT_CLASS_DEVICE
344	select DRM_MIPI_DBI
345	select VIDEOMODE_HELPERS
346	select DRM_PANEL_ILITEK_ILI9806E_CORE
347	help
348	  Say Y if you want to enable support for panels based on the
349	  Ilitek ILI9806E controller using SPI.
350
351config DRM_PANEL_ILITEK_ILI9881C
352	tristate "Ilitek ILI9881C-based panels"
353	depends on OF
354	depends on DRM_MIPI_DSI
355	depends on BACKLIGHT_CLASS_DEVICE
356	help
357	  Say Y if you want to enable support for panels based on the
358	  Ilitek ILI9881c controller.
359
360config DRM_PANEL_ILITEK_ILI9882T
361	tristate "Ilitek ILI9882t-based panels"
362	depends on OF
363	depends on DRM_MIPI_DSI
364	depends on BACKLIGHT_CLASS_DEVICE
365	select DRM_DISPLAY_DSC_HELPER
366	help
367	  Say Y if you want to enable support for panels based on the
368	  Ilitek ILI9882t controller.
369
370config DRM_PANEL_INNOLUX_EJ030NA
371        tristate "Innolux EJ030NA 320x480 LCD panel"
372        depends on OF && SPI
373        select REGMAP_SPI
374        help
375          Say Y here to enable support for the Innolux/Chimei EJ030NA
376          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
377          and LDK handheld gaming consoles.
378
379config DRM_PANEL_INNOLUX_P079ZCA
380	tristate "Innolux P079ZCA panel"
381	depends on OF
382	depends on DRM_MIPI_DSI
383	depends on BACKLIGHT_CLASS_DEVICE
384	help
385	  Say Y here if you want to enable support for Innolux P079ZCA
386	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
387	  24 bit RGB per pixel. It provides a MIPI DSI interface to
388	  the host and has a built-in LED backlight.
389
390config DRM_PANEL_JADARD_JD9365DA_H3
391	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
392	depends on OF
393	depends on DRM_MIPI_DSI
394	depends on BACKLIGHT_CLASS_DEVICE
395	select DRM_KMS_HELPER
396	help
397	  Say Y here if you want to enable support for Jadard JD9365DA-H3
398	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
399	  800RGBx1280 dots at maximum.
400
401config DRM_PANEL_JDI_LPM102A188A
402	tristate "JDI LPM102A188A DSI panel"
403	depends on GPIOLIB
404	depends on OF
405	depends on DRM_MIPI_DSI
406	depends on BACKLIGHT_CLASS_DEVICE
407	help
408	  Say Y here if you want to enable support for JDI LPM102A188A DSI
409	  command mode panel as found in Google Pixel C devices.
410	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
411	  to the host.
412
413config DRM_PANEL_JDI_LT070ME05000
414	tristate "JDI LT070ME05000 WUXGA DSI panel"
415	depends on OF
416	depends on DRM_MIPI_DSI
417	depends on BACKLIGHT_CLASS_DEVICE
418	help
419	  Say Y here if you want to enable support for JDI DSI video mode
420	  panel as found in Google Nexus 7 (2013) devices.
421	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
422	  24 bit per pixel.
423
424config DRM_PANEL_JDI_R63452
425	tristate "JDI R63452 Full HD DSI panel"
426	depends on OF
427	depends on DRM_MIPI_DSI
428	depends on BACKLIGHT_CLASS_DEVICE
429	help
430	  Say Y here if you want to enable support for the JDI R63452
431	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
432
433config DRM_PANEL_KHADAS_TS050
434	tristate "Khadas TS050 panel"
435	depends on OF
436	depends on DRM_MIPI_DSI
437	depends on BACKLIGHT_CLASS_DEVICE
438	help
439	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
440	  panel module. The panel has a 1080x1920 resolution and uses
441	  24 bit RGB per pixel. It provides a MIPI DSI interface to
442	  the host, a built-in LED backlight and touch controller.
443
444config DRM_PANEL_KINGDISPLAY_KD097D04
445	tristate "Kingdisplay kd097d04 panel"
446	depends on OF
447	depends on DRM_MIPI_DSI
448	depends on BACKLIGHT_CLASS_DEVICE
449	help
450	  Say Y here if you want to enable support for Kingdisplay kd097d04
451	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
452	  24 bit RGB per pixel. It provides a MIPI DSI interface to
453	  the host and has a built-in LED backlight.
454
455config DRM_PANEL_LEADTEK_LTK050H3146W
456	tristate "Leadtek LTK050H3146W panel"
457	depends on OF
458	depends on DRM_MIPI_DSI
459	depends on BACKLIGHT_CLASS_DEVICE
460	help
461	  Say Y here if you want to enable support for Leadtek LTK050H3146W
462	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
463	  24 bit RGB per pixel. It provides a MIPI DSI interface to
464	  the host and has a built-in LED backlight.
465
466config DRM_PANEL_LEADTEK_LTK500HD1829
467	tristate "Leadtek LTK500HD1829 panel"
468	depends on OF
469	depends on DRM_MIPI_DSI
470	depends on BACKLIGHT_CLASS_DEVICE
471	help
472	  Say Y here if you want to enable support for Kingdisplay kd097d04
473	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
474	  24 bit RGB per pixel. It provides a MIPI DSI interface to
475	  the host and has a built-in LED backlight.
476
477config DRM_PANEL_LINCOLNTECH_LCD197
478	tristate "Lincoln Technologies lcd197 panel"
479	depends on OF
480	depends on DRM_MIPI_DSI
481	depends on BACKLIGHT_CLASS_DEVICE
482	help
483	  Say Y here if you want to enable support for lincolntech lcd197
484	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
485	  24 bit RGB per pixel. It provides a MIPI DSI interface to
486	  the host.
487
488config DRM_PANEL_LG_LB035Q02
489	tristate "LG LB035Q024573 RGB panel"
490	depends on GPIOLIB && OF && SPI
491	help
492	  Say Y here if you want to enable support for the LB035Q02 RGB panel
493	  (found on the Gumstix Overo Palo35 board). To compile this driver as
494	  a module, choose M here.
495
496config DRM_PANEL_LG_LD070WX3
497	tristate "LG LD070WX3 MIPI DSI panel"
498	depends on OF
499	depends on DRM_MIPI_DSI
500	depends on BACKLIGHT_CLASS_DEVICE
501	select VIDEOMODE_HELPERS
502	help
503	  Say Y here if you want to enable support for the LD070WX3 MIPI DSI
504	  panel found in the NVIDIA Tegra Note 7 tablet.
505
506	  To compile this driver as a module, choose M here: the module will
507	  be called panel-lg-ld070wx3.
508
509config DRM_PANEL_LG_LG4573
510	tristate "LG4573 RGB/SPI panel"
511	depends on OF && SPI
512	select VIDEOMODE_HELPERS
513	help
514	  Say Y here if you want to enable support for LG4573 RGB panel.
515	  To compile this driver as a module, choose M here.
516
517config DRM_PANEL_LG_SW43408
518	tristate "LG SW43408 panel"
519	depends on GPIOLIB
520	depends on OF
521	depends on DRM_MIPI_DSI
522	depends on BACKLIGHT_CLASS_DEVICE
523	select DRM_DISPLAY_DSC_HELPER
524	select DRM_DISPLAY_HELPER
525	help
526	  Say Y here if you want to enable support for LG sw43408 panel.
527	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
528	  pixel. It provides a MIPI DSI interface to the host and has a
529	  built-in LED backlight.
530
531config DRM_PANEL_LXD_M9189A
532	tristate "LXD M9189A MIPI-DSI LCD panel"
533	depends on OF
534	depends on DRM_MIPI_DSI
535	depends on BACKLIGHT_CLASS_DEVICE
536	help
537	  Say Y if you want to enable support for the LXD M9189A 4-Lane
538	  1024x600 MIPI DSI panel.
539
540config DRM_PANEL_MAGNACHIP_D53E6EA8966
541	tristate "Magnachip D53E6EA8966 DSI panel"
542	depends on OF && SPI
543	depends on DRM_MIPI_DSI
544	depends on BACKLIGHT_CLASS_DEVICE
545	select DRM_MIPI_DBI
546	help
547	  DRM panel driver for the Samsung AMS495QA01 panel controlled
548	  with the Magnachip D53E6EA8966 panel IC. This panel receives
549	  video data via DSI but commands via 9-bit SPI using DBI.
550
551config DRM_PANEL_MANTIX_MLAF057WE51
552	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
553	depends on OF
554	depends on DRM_MIPI_DSI
555	depends on BACKLIGHT_CLASS_DEVICE
556	help
557	  Say Y here if you want to enable support for the Mantix
558	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
559	  has a resolution of 720x1440 pixels, a built in backlight and touch
560	  controller.
561
562config DRM_PANEL_MOTOROLA_MOT
563	tristate "Atrix 4G and Droid X2 540x960 DSI video mode panel"
564	depends on OF
565	depends on DRM_MIPI_DSI
566	depends on BACKLIGHT_CLASS_DEVICE
567	select VIDEOMODE_HELPERS
568	help
569	  Say Y here if you want to enable support for the LCD panel module
570	  for Motorola Atrix 4G or Droid X2. Exact panel vendor and model are
571	  unknown. The panel has a 540x960 resolution and uses 24 bit RGB per
572	  pixel.
573
574config DRM_PANEL_NEC_NL8048HL11
575	tristate "NEC NL8048HL11 RGB panel"
576	depends on GPIOLIB && OF && SPI
577	help
578	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
579	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
580	  as a module, choose M here.
581
582config DRM_PANEL_NEWVISION_NV3051D
583	tristate "NewVision NV3051D DSI panel"
584	depends on OF
585	depends on DRM_MIPI_DSI
586	depends on BACKLIGHT_CLASS_DEVICE
587	help
588	  This driver supports the NV3051D based panel found on the Anbernic
589	  RG353P and RG353V.
590
591config DRM_PANEL_NEWVISION_NV3052C
592	tristate "NewVision NV3052C RGB/SPI panel"
593	depends on OF && SPI
594	depends on BACKLIGHT_CLASS_DEVICE
595	select DRM_MIPI_DBI
596	help
597	  Say Y here if you want to enable support for the panels built
598	  around the NewVision NV3052C display controller.
599
600config DRM_PANEL_NOVATEK_NT35510
601	tristate "Novatek NT35510 RGB panel driver"
602	depends on OF
603	depends on DRM_MIPI_DSI
604	depends on BACKLIGHT_CLASS_DEVICE
605	help
606	  Say Y here if you want to enable support for the panels built
607	  around the Novatek NT35510 display controller, such as some
608	  Hydis panels.
609
610config DRM_PANEL_NOVATEK_NT35532
611	tristate "Novatek NT35532-based DSI video mode panel"
612	depends on OF
613	depends on DRM_MIPI_DSI
614	depends on BACKLIGHT_CLASS_DEVICE
615	select DRM_KMS_HELPER
616	help
617	  Say Y or M here if you want to enable support for Novatek
618	  NT35532-based 1080p video mode DSI panels.
619
620config DRM_PANEL_NOVATEK_NT35560
621	tristate "Novatek NT35560 DSI command mode panel"
622	depends on OF
623	depends on DRM_MIPI_DSI
624	depends on BACKLIGHT_CLASS_DEVICE
625	select VIDEOMODE_HELPERS
626	help
627	  Say Y here if you want to enable the Novatek NT35560 display
628	  controller. This panel supports DSI in both command and video
629	  mode. This supports several panels such as Sony ACX424AKM and
630	  ACX424AKP.
631
632config DRM_PANEL_NOVATEK_NT35950
633	tristate "Novatek NT35950 DSI panel"
634	depends on OF
635	depends on DRM_MIPI_DSI
636	depends on BACKLIGHT_CLASS_DEVICE
637	help
638	  Say Y here if you want to enable support for the panels built
639	  around the Novatek NT35950 display controller, such as some
640	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
641	  mobile phones.
642
643config DRM_PANEL_NOVATEK_NT36523
644	tristate "Novatek NT36523 panel driver"
645	depends on OF
646	depends on DRM_MIPI_DSI
647	depends on BACKLIGHT_CLASS_DEVICE
648	help
649	  Say Y here if you want to enable support for the panels built
650	  around the Novatek NT36523 display controller, such as some
651	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
652
653config DRM_PANEL_NOVATEK_NT36672A
654	tristate "Novatek NT36672A DSI panel"
655	depends on GPIOLIB
656	depends on OF
657	depends on DRM_MIPI_DSI
658	depends on BACKLIGHT_CLASS_DEVICE
659	help
660	  Say Y here if you want to enable support for the panels built
661	  around the Novatek NT36672A display controller, such as some
662	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
663
664config DRM_PANEL_NOVATEK_NT36672E
665	tristate "Novatek NT36672E DSI panel"
666	depends on GPIOLIB
667	depends on OF
668	depends on DRM_MIPI_DSI
669	depends on BACKLIGHT_CLASS_DEVICE
670	help
671	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
672	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
673	  RGB per pixel.
674
675config DRM_PANEL_NOVATEK_NT37700F
676	tristate "Novatek NT37700F DSI panel"
677	depends on OF
678	depends on DRM_MIPI_DSI
679	depends on BACKLIGHT_CLASS_DEVICE
680	help
681	  Say Y here if you want to enable support for Novatek NT37700F DSI
682	  panel module. The panel has a resolution of 1080x2160.
683
684config DRM_PANEL_NOVATEK_NT37801
685	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
686	depends on OF
687	depends on DRM_MIPI_DSI
688	depends on BACKLIGHT_CLASS_DEVICE
689	select DRM_DISPLAY_DSC_HELPER
690	select DRM_DISPLAY_HELPER
691	help
692	  Say Y here if you want to enable support for Novatek NT37801 (or
693	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
694	  resolution.
695
696config DRM_PANEL_NOVATEK_NT39016
697	tristate "Novatek NT39016 RGB/SPI panel"
698	depends on OF && SPI
699	depends on BACKLIGHT_CLASS_DEVICE
700	select REGMAP_SPI
701	help
702	  Say Y here if you want to enable support for the panels built
703	  around the Novatek NT39016 display controller.
704
705config DRM_PANEL_OLIMEX_LCD_OLINUXINO
706	tristate "Olimex LCD-OLinuXino panel"
707	depends on OF
708	depends on I2C
709	depends on BACKLIGHT_CLASS_DEVICE
710	select CRC32
711	help
712	  The panel is used with different sizes LCDs, from 480x272 to
713	  1280x800, and 24 bit per pixel.
714
715	  Say Y here if you want to enable support for Olimex Ltd.
716	  LCD-OLinuXino panel.
717
718config DRM_PANEL_ORISETECH_OTA5601A
719        tristate "Orise Technology ota5601a RGB/SPI panel"
720        depends on SPI
721        depends on BACKLIGHT_CLASS_DEVICE
722        select REGMAP_SPI
723        help
724          Say Y here if you want to enable support for the panels built
725          around the Orise Technology OTA9601A display controller.
726
727config DRM_PANEL_ORISETECH_OTM8009A
728	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
729	depends on OF
730	depends on DRM_MIPI_DSI
731	depends on BACKLIGHT_CLASS_DEVICE
732	help
733	  Say Y here if you want to enable support for Orise Technology
734	  otm8009a 480x800 dsi 2dl panel.
735
736config DRM_PANEL_OSD_OSD101T2587_53TS
737	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
738	depends on OF
739	depends on DRM_MIPI_DSI
740	depends on BACKLIGHT_CLASS_DEVICE
741	help
742	  Say Y here if you want to enable support for One Stop Displays
743	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
744
745config DRM_PANEL_PANASONIC_VVX10F034N00
746	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
747	depends on OF
748	depends on DRM_MIPI_DSI
749	depends on BACKLIGHT_CLASS_DEVICE
750	help
751	  Say Y here if you want to enable support for Panasonic VVX10F034N00
752	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
753	  Xperia Z2 tablets
754
755config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
756	tristate "Raspberry Pi 7-inch touchscreen panel"
757	depends on DRM_MIPI_DSI
758	help
759	  Say Y here if you want to enable support for the Raspberry
760	  Pi 7" Touchscreen.  To compile this driver as a module,
761	  choose M here.
762
763config DRM_PANEL_RAYDIUM_RM67191
764	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
765	depends on OF
766	depends on DRM_MIPI_DSI
767	depends on BACKLIGHT_CLASS_DEVICE
768	help
769	  Say Y here if you want to enable support for Raydium RM67191 FHD
770	  (1080x1920) DSI panel.
771
772config DRM_PANEL_RAYDIUM_RM67200
773	tristate "Raydium RM67200-based DSI panel"
774	depends on OF
775	depends on DRM_MIPI_DSI
776	help
777	  Say Y here if you want to enable support for Raydium RM67200-based
778	  DSI video mode panels. This panel controller can be found in the
779	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
780	  evaluation boards.
781
782config DRM_PANEL_RAYDIUM_RM68200
783	tristate "Raydium RM68200 720x1280 DSI video mode panel"
784	depends on OF
785	depends on DRM_MIPI_DSI
786	depends on BACKLIGHT_CLASS_DEVICE
787	help
788	  Say Y here if you want to enable support for Raydium RM68200
789	  720x1280 DSI video mode panel.
790
791config DRM_PANEL_RAYDIUM_RM692E5
792	tristate "Raydium RM692E5-based DSI panel"
793	depends on OF
794	depends on DRM_MIPI_DSI
795	depends on BACKLIGHT_CLASS_DEVICE
796	select DRM_DISPLAY_DSC_HELPER
797	select DRM_DISPLAY_HELPER
798	help
799	  Say Y here if you want to enable support for Raydium RM692E5-based
800	  display panels, such as the one found in the Fairphone 5 smartphone.
801
802config DRM_PANEL_RAYDIUM_RM69380
803	tristate "Raydium RM69380-based DSI panel"
804	depends on GPIOLIB
805	depends on OF
806	depends on DRM_MIPI_DSI
807	depends on BACKLIGHT_CLASS_DEVICE
808	help
809	  Say Y here if you want to enable support for Raydium RM69380-based
810	  display panels.
811
812	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
813	  in combination with an EDO OLED panel.
814
815config DRM_PANEL_RENESAS_R61307
816	tristate "Renesas R61307 DSI video mode panel"
817	depends on OF
818	depends on DRM_MIPI_DSI
819	depends on BACKLIGHT_CLASS_DEVICE
820	select VIDEOMODE_HELPERS
821	help
822	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
823	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
824	  resolution and uses 24 bit RGB per pixel.
825
826	  This panel controller can be found in LG Optimus Vu P895 smartphone
827	  in combination with LCD panel.
828
829config DRM_PANEL_RENESAS_R69328
830	tristate "Renesas R69328 720x1280 DSI video mode panel"
831	depends on OF
832	depends on DRM_MIPI_DSI
833	depends on BACKLIGHT_CLASS_DEVICE
834	select VIDEOMODE_HELPERS
835	help
836	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
837	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
838	  resolution and uses 24 bit RGB per pixel.
839
840	  This panel controller can be found in LG Optimus 4X P895 smartphone
841	  in combination with LCD panel.
842
843config DRM_PANEL_RONBO_RB070D30
844	tristate "Ronbo Electronics RB070D30 panel"
845	depends on OF
846	depends on DRM_MIPI_DSI
847	depends on BACKLIGHT_CLASS_DEVICE
848	help
849	  Say Y here if you want to enable support for Ronbo Electronics
850	  RB070D30 1024x600 DSI panel.
851
852config DRM_PANEL_SAMSUNG_AMS581VF01
853	tristate "Samsung AMS581VF01 panel"
854	depends on OF
855	depends on DRM_MIPI_DSI
856	depends on BACKLIGHT_CLASS_DEVICE
857	help
858	  Say Y or M here if you want to enable support for the
859	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
860
861config DRM_PANEL_SAMSUNG_AMS639RQ08
862	tristate "Samsung AMS639RQ08 panel"
863	depends on OF
864	depends on DRM_MIPI_DSI
865	depends on BACKLIGHT_CLASS_DEVICE
866	help
867	  Say Y or M here if you want to enable support for the
868	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
869
870config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
871	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
872	depends on GPIOLIB && OF && REGULATOR
873	depends on DRM_MIPI_DSI
874	depends on BACKLIGHT_CLASS_DEVICE
875	help
876	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
877	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
878	  GT-I9195I). To compile this driver as a module, choose M here.
879
880config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
881	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
882	depends on OF
883	select DRM_MIPI_DSI
884	select VIDEOMODE_HELPERS
885
886config DRM_PANEL_SAMSUNG_ATNA33XC20
887	tristate "Samsung ATNA33XC20 eDP panel"
888	depends on OF
889	depends on BACKLIGHT_CLASS_DEVICE
890	depends on PM
891	select DRM_DISPLAY_DP_HELPER
892	select DRM_DISPLAY_HELPER
893	select DRM_DISPLAY_DP_AUX_BUS
894	help
895	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
896	  be handled by the DRM_PANEL_SIMPLE driver because its power
897	  sequencing is non-standard.
898
899config DRM_PANEL_SAMSUNG_DB7430
900	tristate "Samsung DB7430-based DPI panels"
901	depends on OF && SPI && GPIOLIB
902	depends on BACKLIGHT_CLASS_DEVICE
903	select DRM_MIPI_DBI
904	help
905	  Say Y here if you want to enable support for the Samsung
906	  DB7430 DPI display controller used in such devices as the
907	  LMS397KF04 480x800 DPI panel.
908
909config DRM_PANEL_SAMSUNG_LD9040
910	tristate "Samsung LD9040 RGB/SPI panel"
911	depends on OF && SPI
912	depends on BACKLIGHT_CLASS_DEVICE
913	select VIDEOMODE_HELPERS
914
915config DRM_PANEL_SAMSUNG_LTL106HL02
916	tristate "Samsung LTL106HL02 panel"
917	depends on OF
918	depends on DRM_MIPI_DSI
919	depends on BACKLIGHT_CLASS_DEVICE
920	select VIDEOMODE_HELPERS
921	help
922	  Say Y here if you want to enable support for the Samsung LTL106HL02
923	  panel driver which is used in Microsoft Surface 2.
924
925	  To compile this driver as a module, choose M here: the module
926	  will be called panel-samsung-ltl106hl02.
927
928config DRM_PANEL_SAMSUNG_S6E3FA7
929	tristate "Samsung S6E3FA7 panel driver"
930	depends on OF
931	depends on DRM_MIPI_DSI
932	depends on BACKLIGHT_CLASS_DEVICE
933	help
934	  Say Y here if you want to enable support for the Samsung S6E3FA7
935	  1920x2220 panel.
936
937config DRM_PANEL_SAMSUNG_S6D16D0
938	tristate "Samsung S6D16D0 DSI video mode panel"
939	depends on OF
940	depends on DRM_MIPI_DSI
941	select VIDEOMODE_HELPERS
942
943config DRM_PANEL_SAMSUNG_S6D27A1
944	tristate "Samsung S6D27A1 DPI panel driver"
945	depends on OF && SPI && GPIOLIB
946	select DRM_MIPI_DBI
947	help
948	  Say Y here if you want to enable support for the Samsung
949	  S6D27A1 DPI 480x800 panel.
950
951	  This panel can be found in Samsung Galaxy Ace 2
952	  GT-I8160 mobile phone.
953
954config DRM_PANEL_SAMSUNG_S6D7AA0
955	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
956	depends on OF
957	depends on BACKLIGHT_CLASS_DEVICE
958	select DRM_MIPI_DSI
959	select VIDEOMODE_HELPERS
960
961config DRM_PANEL_SAMSUNG_S6E3FC2X01
962	tristate "Samsung S6E3FC2X01 DSI panel controller"
963	depends on GPIOLIB
964	depends on OF
965	depends on DRM_MIPI_DSI
966	depends on BACKLIGHT_CLASS_DEVICE
967	help
968	  Say Y or M here if you want to enable support for the
969	  Samsung S6E3FC2 DDIC and connected MIPI DSI panel.
970	  Currently supported panels:
971
972	    Samsung AMS641RW (found in the OnePlus 6T smartphone)
973
974config DRM_PANEL_SAMSUNG_S6E3HA2
975	tristate "Samsung S6E3HA2 DSI video mode panel"
976	depends on OF
977	depends on DRM_MIPI_DSI
978	depends on BACKLIGHT_CLASS_DEVICE
979	select VIDEOMODE_HELPERS
980
981config DRM_PANEL_SAMSUNG_S6E3HA8
982	tristate "Samsung S6E3HA8 DSI video mode panel"
983	depends on GPIOLIB
984	depends on OF
985	depends on DRM_MIPI_DSI
986	depends on BACKLIGHT_CLASS_DEVICE
987	select DRM_DISPLAY_DSC_HELPER
988	help
989	  Say Y or M here if you want to enable support for the
990	  Samsung S6E3HA8 DDIC and connected MIPI DSI panel.
991	  Currently supported panels:
992
993	    Samsung AMB577PX01 (found in the Samsung S9 smartphone)
994
995
996config DRM_PANEL_SAMSUNG_S6E63J0X03
997	tristate "Samsung S6E63J0X03 DSI command mode panel"
998	depends on OF
999	depends on DRM_MIPI_DSI
1000	depends on BACKLIGHT_CLASS_DEVICE
1001	select VIDEOMODE_HELPERS
1002
1003config DRM_PANEL_SAMSUNG_S6E63M0
1004	tristate "Samsung S6E63M0 RGB panel"
1005	depends on OF
1006	depends on BACKLIGHT_CLASS_DEVICE
1007	help
1008	  Say Y here if you want to enable support for Samsung S6E63M0
1009	  AMOLED LCD panel. This panel can be accessed using SPI or
1010	  DSI.
1011
1012config DRM_PANEL_SAMSUNG_S6E63M0_SPI
1013	tristate "Samsung S6E63M0 RGB SPI interface"
1014	depends on SPI
1015	depends on DRM_PANEL_SAMSUNG_S6E63M0
1016	default DRM_PANEL_SAMSUNG_S6E63M0
1017	select DRM_MIPI_DBI
1018	help
1019	  Say Y here if you want to be able to access the Samsung
1020	  S6E63M0 panel using SPI.
1021
1022config DRM_PANEL_SAMSUNG_S6E63M0_DSI
1023	tristate "Samsung S6E63M0 RGB DSI interface"
1024	depends on DRM_MIPI_DSI
1025	depends on DRM_PANEL_SAMSUNG_S6E63M0
1026	help
1027	  Say Y here if you want to be able to access the Samsung
1028	  S6E63M0 panel using DSI.
1029
1030config DRM_PANEL_SAMSUNG_S6E8AA0
1031	tristate "Samsung S6E8AA0 DSI video mode panel"
1032	depends on OF
1033	select DRM_MIPI_DSI
1034	select VIDEOMODE_HELPERS
1035
1036config DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01
1037	tristate "Samsung AMS561RA01 panel with S6E8AA5X01 controller"
1038	depends on GPIOLIB && OF && REGULATOR
1039	depends on DRM_MIPI_DSI
1040	depends on BACKLIGHT_CLASS_DEVICE
1041	help
1042	  Say Y here if you want to enable support for Samsung AMS561RA01
1043	  panel, which uses Samsung's S6E8AA5X01 controller. The panel has a
1044	  ~5.6 inch AMOLED display, and the controller is driven by the MIPI
1045	  DSI protocol with 4 lanes.
1046
1047config DRM_PANEL_SAMSUNG_S6E8FC0
1048	tristate "Samsung S6E8FC0 DSI controller"
1049	depends on OF
1050	depends on BACKLIGHT_CLASS_DEVICE
1051	select DRM_MIPI_DSI
1052	help
1053	  Say Y or M here if you want to enable support for the Samsung
1054	  S6E8FC0 DSI controller and connected panel.
1055	  Currently supported panels:
1056
1057	    M1906F9 (M1906F9SH or M1906F9SI), 6.09 inch 720x1560, found
1058	    in the Xiaomi Mi A3 smartphone (xiaomi-laurel).
1059
1060config DRM_PANEL_SAMSUNG_SOFEF00
1061	tristate "Samsung SOFEF00 DSI panel controller"
1062	depends on GPIOLIB
1063	depends on OF
1064	depends on DRM_MIPI_DSI
1065	depends on BACKLIGHT_CLASS_DEVICE
1066	help
1067	  Say Y or M here if you want to enable support for the Samsung AMOLED
1068	  panel SOFEF00 DDIC and connected panel.
1069	  Currently supported panels:
1070
1071	    Samsung AMS628NW01 (found in OnePlus 6, 1080x2280@60Hz)
1072
1073config DRM_PANEL_SEIKO_43WVF1G
1074	tristate "Seiko 43WVF1G panel"
1075	depends on OF
1076	depends on BACKLIGHT_CLASS_DEVICE
1077	select VIDEOMODE_HELPERS
1078	help
1079	  Say Y here if you want to enable support for the Seiko
1080	  43WVF1G controller for 800x480 LCD panels
1081
1082config DRM_PANEL_SHARP_LQ079L1SX01
1083	tristate "Sharp LQ079L1SX01 panel"
1084	depends on OF
1085	depends on DRM_MIPI_DSI
1086	depends on BACKLIGHT_CLASS_DEVICE
1087	select VIDEOMODE_HELPERS
1088	help
1089	  Say Y here if you want to enable support for Sharp LQ079L1SX01
1090	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1091	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1092	  the host.
1093
1094	  To compile this driver as a module, choose M here: the module
1095	  will be called panel-sharp-lq079l1sx01.
1096
1097config DRM_PANEL_SHARP_LQ101R1SX01
1098	tristate "Sharp LQ101R1SX01 panel"
1099	depends on OF
1100	depends on DRM_MIPI_DSI
1101	depends on BACKLIGHT_CLASS_DEVICE
1102	help
1103	  Say Y here if you want to enable support for Sharp LQ101R1SX01
1104	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1105	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1106	  the host and has a built-in LED backlight.
1107
1108	  To compile this driver as a module, choose M here: the module
1109	  will be called panel-sharp-lq101r1sx01.
1110
1111config DRM_PANEL_SHARP_LS037V7DW01
1112	tristate "Sharp LS037V7DW01 VGA LCD panel"
1113	depends on GPIOLIB && OF && REGULATOR
1114	help
1115	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
1116	  (480x640) LCD panel (found on the TI SDP3430 board).
1117
1118config DRM_PANEL_SHARP_LS043T1LE01
1119	tristate "Sharp LS043T1LE01 qHD video mode panel"
1120	depends on OF
1121	depends on DRM_MIPI_DSI
1122	depends on BACKLIGHT_CLASS_DEVICE
1123	help
1124	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
1125	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
1126
1127config DRM_PANEL_SHARP_LS060T1SX01
1128	tristate "Sharp LS060T1SX01 FullHD video mode panel"
1129	depends on OF
1130	depends on DRM_MIPI_DSI
1131	depends on BACKLIGHT_CLASS_DEVICE
1132	help
1133	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
1134	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
1135	  Bundle.
1136
1137config DRM_PANEL_SITRONIX_ST7701
1138	tristate "Sitronix ST7701 panel driver"
1139	depends on OF
1140	depends on SPI || DRM_MIPI_DSI
1141	select DRM_MIPI_DBI if SPI
1142	depends on BACKLIGHT_CLASS_DEVICE
1143	help
1144	  Say Y here if you want to enable support for the Sitronix
1145	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
1146	  system interfaces.
1147
1148config DRM_PANEL_SITRONIX_ST7703
1149	tristate "Sitronix ST7703 based MIPI touchscreen panels"
1150	depends on OF
1151	depends on DRM_MIPI_DSI
1152	depends on BACKLIGHT_CLASS_DEVICE
1153	help
1154	  Say Y here if you want to enable support for Sitronix ST7703 based
1155	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
1156	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
1157	  in backlight and touch controller.
1158	  Touch input support is provided by the goodix driver and needs to be
1159	  selected separately.
1160
1161config DRM_PANEL_SITRONIX_ST7789V
1162	tristate "Sitronix ST7789V panel"
1163	depends on OF && SPI
1164	depends on BACKLIGHT_CLASS_DEVICE
1165	help
1166	  Say Y here if you want to enable support for the Sitronix
1167	  ST7789V controller for 240x320 LCD panels
1168
1169config DRM_PANEL_SONY_ACX565AKM
1170	tristate "Sony ACX565AKM panel"
1171	depends on GPIOLIB && OF && SPI
1172	depends on BACKLIGHT_CLASS_DEVICE
1173	help
1174	  Say Y here if you want to enable support for the Sony ACX565AKM
1175	  800x600 3.5" panel (found on the Nokia N900).
1176
1177config DRM_PANEL_SONY_TD4353_JDI
1178	tristate "Sony TD4353 JDI panel"
1179	depends on GPIOLIB && OF
1180	depends on DRM_MIPI_DSI
1181	depends on BACKLIGHT_CLASS_DEVICE
1182	help
1183	  Say Y here if you want to enable support for the Sony Tama
1184	  TD4353 JDI command mode panel as found on some Sony Xperia
1185	  XZ2 and XZ2 Compact smartphones.
1186
1187config DRM_PANEL_SONY_TULIP_TRULY_NT35521
1188	tristate "Sony Tulip Truly NT35521 panel"
1189	depends on GPIOLIB && OF
1190	depends on DRM_MIPI_DSI
1191	depends on BACKLIGHT_CLASS_DEVICE
1192	help
1193	  Say Y here if you want to enable support for the Sony Tulip
1194	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
1195	  Aqua phone.
1196
1197config DRM_PANEL_STARTEK_KD070FHFID015
1198	tristate "STARTEK KD070FHFID015 panel"
1199	depends on OF
1200	depends on DRM_MIPI_DSI
1201	depends on BACKLIGHT_CLASS_DEVICE
1202	help
1203	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
1204	  based on RENESAS-R69429 controller. The panel is a 7-inch TFT LCD display
1205	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
1206	  the host, a built-in LED backlight and touch controller.
1207
1208config DRM_PANEL_EDP
1209	tristate "support for simple Embedded DisplayPort panels"
1210	depends on OF
1211	depends on BACKLIGHT_CLASS_DEVICE
1212	depends on PM
1213	select VIDEOMODE_HELPERS
1214	select DRM_DISPLAY_DP_HELPER
1215	select DRM_DISPLAY_HELPER
1216	select DRM_DISPLAY_DP_AUX_BUS
1217	select DRM_KMS_HELPER
1218	help
1219	  DRM panel driver for dumb eDP panels that need at most a regulator and
1220	  a GPIO to be powered up. Optionally a backlight can be attached so
1221	  that it can be automatically turned off when the panel goes into a
1222	  low power state.
1223
1224config DRM_PANEL_SIMPLE
1225	tristate "support for simple panels (other than eDP ones)"
1226	depends on OF
1227	depends on BACKLIGHT_CLASS_DEVICE
1228	depends on PM
1229	select VIDEOMODE_HELPERS
1230	help
1231	  DRM panel driver for dumb non-eDP panels that need at most a regulator
1232	  and a GPIO to be powered up. Optionally a backlight can be attached so
1233	  that it can be automatically turned off when the panel goes into a
1234	  low power state.
1235
1236config DRM_PANEL_SUMMIT
1237	tristate "Apple Summit display panel"
1238	depends on OF
1239	depends on DRM_MIPI_DSI
1240	depends on BACKLIGHT_CLASS_DEVICE
1241	help
1242	  Say Y if you want to enable support for the "Summit" display panel
1243	  used as a touchbar on certain Apple laptops.
1244
1245config DRM_PANEL_SYNAPTICS_R63353
1246	tristate "Synaptics R63353-based panels"
1247	depends on OF
1248	depends on DRM_MIPI_DSI
1249	depends on BACKLIGHT_CLASS_DEVICE
1250	help
1251	  Say Y if you want to enable support for panels based on the
1252	  Synaptics R63353 controller.
1253
1254config DRM_PANEL_SYNAPTICS_TDDI
1255	tristate "Synaptics TDDI display panels"
1256	depends on OF
1257	depends on DRM_MIPI_DSI
1258	depends on BACKLIGHT_CLASS_DEVICE
1259	help
1260	  Say Y if you want to enable support for the Synaptics TDDI display
1261	  panels. There are multiple MIPI DSI panels manufactured under the TDDI
1262	  namesake, with varying resolutions and data lanes. They also have a
1263	  built-in LED backlight and a touch controller.
1264
1265config DRM_PANEL_TDO_TL070WSH30
1266	tristate "TDO TL070WSH30 DSI panel"
1267	depends on OF
1268	depends on DRM_MIPI_DSI
1269	depends on BACKLIGHT_CLASS_DEVICE
1270	help
1271	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1272	  panel module. The panel has a 1024×600 resolution and uses
1273	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1274	  the host, a built-in LED backlight and touch controller.
1275
1276config DRM_PANEL_TPO_TD028TTEC1
1277	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1278	depends on OF && SPI
1279	depends on BACKLIGHT_CLASS_DEVICE
1280	help
1281	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1282	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1283
1284config DRM_PANEL_TPO_TD043MTEA1
1285	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1286	depends on GPIOLIB && OF && REGULATOR && SPI
1287	help
1288	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1289	  4.3" panel (found on the OMAP3 Pandora board).
1290
1291config DRM_PANEL_TPO_TPG110
1292	tristate "TPO TPG 800x400 panel"
1293	depends on OF && SPI && GPIOLIB
1294	depends on BACKLIGHT_CLASS_DEVICE
1295	help
1296	  Say Y here if you want to enable support for TPO TPG110
1297	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1298	  800x400 LCD panels.
1299
1300config DRM_PANEL_TRULY_NT35597_WQXGA
1301	tristate "Truly WQXGA"
1302	depends on OF
1303	depends on DRM_MIPI_DSI
1304	help
1305	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1306	  Video Mode panel
1307
1308config DRM_PANEL_VISIONOX_G2647FB105
1309	tristate "Visionox G2647FB105"
1310	depends on OF
1311	depends on DRM_MIPI_DSI
1312	depends on BACKLIGHT_CLASS_DEVICE
1313	help
1314	  Say Y here if you want to enable support for the Visionox
1315	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1316
1317config DRM_PANEL_VISIONOX_R66451
1318	tristate "Visionox R66451"
1319	depends on OF
1320	depends on DRM_MIPI_DSI
1321	depends on BACKLIGHT_CLASS_DEVICE
1322	select DRM_DISPLAY_DSC_HELPER
1323	select DRM_DISPLAY_HELPER
1324	help
1325	  Say Y here if you want to enable support for Visionox
1326	  R66451 1080x2340 AMOLED DSI panel.
1327
1328config DRM_PANEL_VISIONOX_RM69299
1329	tristate "Visionox RM69299"
1330	depends on GPIOLIB
1331	depends on OF
1332	depends on DRM_MIPI_DSI
1333	depends on BACKLIGHT_CLASS_DEVICE
1334	help
1335	  Say Y here if you want to enable support for Visionox
1336	  RM69299  DSI Video Mode panel.
1337
1338config DRM_PANEL_VISIONOX_RM692E5
1339	tristate "Visionox RM692E5"
1340	depends on OF
1341	depends on DRM_MIPI_DSI
1342	depends on BACKLIGHT_CLASS_DEVICE
1343	select DRM_DISPLAY_DSC_HELPER
1344	select DRM_DISPLAY_HELPER
1345	help
1346	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1347	  display panels, such as the one found in the Nothing Phone (1)
1348	  smartphone.
1349
1350config DRM_PANEL_VISIONOX_VTDR6130
1351	tristate "Visionox VTDR6130"
1352	depends on OF
1353	depends on DRM_MIPI_DSI
1354	depends on BACKLIGHT_CLASS_DEVICE
1355	help
1356	  Say Y here if you want to enable support for Visionox
1357	  VTDR6130 1080x2400 AMOLED DSI panel.
1358
1359config DRM_PANEL_WIDECHIPS_WS2401
1360	tristate "Widechips WS2401 DPI panel driver"
1361	depends on SPI && GPIOLIB
1362	depends on BACKLIGHT_CLASS_DEVICE
1363	select DRM_MIPI_DBI
1364	help
1365	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1366	  480x800 display controller used in panels such as Samsung LMS380KF01.
1367	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1368
1369config DRM_PANEL_XINPENG_XPP055C272
1370	tristate "Xinpeng XPP055C272 panel driver"
1371	depends on OF
1372	depends on DRM_MIPI_DSI
1373	depends on BACKLIGHT_CLASS_DEVICE
1374	help
1375	  Say Y here if you want to enable support for the Xinpeng
1376	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1377	  system interfaces.
1378endmenu
1379